Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance N A | NA | NA | 121004 | Admitted-Finance |
| 4 | Admitted-Finance | Admitted-Finance |
| 5 | Admitted-Finance | Admitted-Finance |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
26 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) FARIDABAD
GE (AF) FARIDABAD
ADDNL/ALTN TO CERTAIN OMQs AT AF STN CHANDINAGAR IN AOR GE (AF) FARIDABAD
2024_MES_640804_1
GE (FBD)/AF-88/2023-2024
Open Tender
Civil Works
Item Rate
180 days
Chandinagar
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (AF) FARIDABAD
₹86,000
Yes
18 Mar 2024
5 Feb 2024
28 Feb 2024
5 Feb 2024
26 Feb 2024
19 Feb 2024
5 Feb 2024 - 9 Feb 2024
Amount
Taking down chowkats or frame with shutters (without taking off shuttters from frames) size exc 1.5 Sqm but not exc 4 Sqm each and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and directed by Engineer-in-Charge.
Taking down chowkats or frame with shutters (without taking off shuttters from frames) size n .exc 1.5 Sqm and removing from site and making good disturbed surfaces as per existing specifications complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in opening complete solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge.
Supply and fixing for factory made solid panel PVC door shutter 30mm thick(Style) consisting of frame made out of M.S. tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside wqith solvent cement for stiles and plain colour PVC sheet for top rail, Lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement fixing in frame at site complete all as specified and directed by Engineer-in-Charge.
M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 complete all as specified and directed by Engineer-in-Charge.
S&F powder coated aluminium frame of standard section for doors, windows , ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge.
S&F powder coated aluminium window and ventilator shutters , side hung type / sliding without sash bars, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, ruber packing , anodised aluminum snap beading , screws, anodised aluminium fittings such as peg stays 150mm long (1nos). hinges type B-21 100mm long (2nos) suitable handle (1nos) complete all as specified and directed by Engineer-in-Charge.
M&L 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sq.m in each pane complete all as specified and directed by Engineer-in-Charge.
S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in-Charge.
S&F 3 mm thick figured glass, pin head type and glazing with oil putty in squares not exceeding 0.50 Sqm each pane complete all as specified and directed by Engineer-in-Charge.
S&F for 30 mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, complete all as specified and directed by Engineer-in-Charge. Note: Stainless steel butt hinges and necessary Stainless steel screws shall be paid separately.
S&F for 30 mm thick Factory made single extruded WPC (Wood Polymer Composite) solid plain wiremesh/skelton door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 Kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N edge),minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk stainless steel screws, complete all as specified and directed by Engineer-in-Charge. Note: Stainless steel butt hinges and necessary Stainless steel screws shall be paid separately.
S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and directed by Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
Supply and fixing for 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws complete all as specified and directed by Engineer-in-Charge.
Supply and fixing mild steel butt hinges, 100 mm long, medium weight, cold rolled fixed with steel screws or welded to angle iron frame where required complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed by Engineer-in-Charge.
Supply and fixing for 125 mm aluminum handles cast type anodized complete all as specified and directed by Engineer-in-Charge.
Demolition of brick work built in cement mortar in any position including all quoins, arches & pillars etc complete all as specified and directed by Engineer-in-Charge.
M&L for brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
Taking down cement plaster including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge.
Material and labour for rendering 15 mm thick in CM 1:6 on fair faces of brick or concrete surfaces of walls, facia etc to be finished even and smooth (w/o using extra cement) complete all as specified and directed by Engineer-in-Charge.
Material and labour for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces of walls finished even and smooth w/o using extra Cement complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparing newly plastered surfaces and applying two coats of distemper oil emulsion including priming plastered and other surfaces with chalk whitening preparatory to distempering on surfaces of walls complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engineer-in-Charge.
Dismantling water tanks of capacity exc 250 and n exc 500 ltrs and removal to from site, complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge.
Dismantling water tanks of capacity exc 500 and n exc 1000 ltrs and removal from site, complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 1000 ltrs capacity Rotational moulded polyethylene water storage tanks trriple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer-in-Charge.
Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removing to store complete all as specified and directed by Engineer-in-Charge.
Supplying and laying of CPVC pipes of bore 20 mm outer dia SDR 11 and plain CPVC SDR 11 fittings in trenches complete all as specified and directed by Engineer-in-Charge.
Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removing to store complete all as specified and directed by Engineer-in-Charge.
Supplying and laying of CPVC pipes of bore 25 mm outer dia SDR 11 and plain CPVC SDR 11 fittings in trenches complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs 15 mm Brass CP central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed including connections complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs 15 mm Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
S&F for 15 mm bore concealed type chromium plated Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed by Engineer-in-Charge.
S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed by Engineer-in-Charge.
Supply and fixing for 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints, laid in trenches or in floors or fixed to wall complete all as specified and directed by Engineer-in-Charge.
Supply and fixing for 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring, joints, laid in trenches or in floors or fixed to wall complete all as specified and directed by Engineer-in-Charge.
Supply and fixing 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair 15 mm bore chromium plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair 15 mm bore chromium plated Stop angle valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair Brass chromium plated shower rose 125mm size complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in polythene connection of low density polyethylene (LDPE) pipes of pressure rating 2.5 Kgf/Sqcm, 45cm long with and including two brass union couplings, heavy duty, suitable for 15mm bore pipe, one on each end for connecting polyethylene pipe to GI pipe and fixed complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair brass chromium plated tubular towel rail 20 mm dia D type 60 cm long between flanges complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engineer-in-Charge.
S&F in repair coloured composite pattern vitreous china wash down water closet pan (pedestal pattern, model "Corium-220" of any colour, twin flush system including soft close seat cover complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair vitreous china wash down water closet pan (pedestal pattern) white including connection to drain or out going pipe etc including making good the floor complete including plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repair fancy coloured wash hand pedestal basin size 630x510x180mm complete all as erected by manufacturers instruction shade as approved by GE. including 32 mm dia CP waste fitting and PVC pipe of required length complete all as specified and directed by Engineer-in-Charge.
Dismantling of stone slab and tiles of any description or thickness in floors, approns etc laid, bedded and pointed in any mortar and removing rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
Material and labour for granite stone tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types including 20 mm thick bedding layer in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
Material and labour for granite stone tiles dado 20mm thick machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing of mirror finish type including 15 mm thick screed in CM 1 :4 on brick or concrete surface complete all as specified and directed by Engineer-in-Charge.
Material and labour for machine cut Kota stone slabs flooring 18 to 22 mm thick over 20 mm thick cement screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
Material and labour for 18 to 22 mm thick machine cut Kota stone slabs in riser of steps, skirting, dado and pillar laid over 10 mm thick cement screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair sinks with drainage board made of stainless steel sheet 1mm thick kitchen or laboratory with plugs, washers and waste; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engineer-in-Charge.
Dismantling floor hearth or wall tilling including cement mortat bedding (but not backaing coat) removing serviceable tiles to store & rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M&L decorative digital type glazed ceramic coloured/highlighter tiles 600mm x 300 mm x 7mm to 8 mm thick in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match over 10mm thick rendering in CM 1:4 complete all as specified and directed by Engr-in-Charge.
Material and labour for 1st quality non skid coloured ceramic dark tiles of size 7-8 mm thick area of each tiles exceeding 0.11 Sqm bur not exc 0.18 Sqm (400x400mm) as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over and including 20 mm thick screed bed in cm 1:6 complete all as specified and directed by Engineer-in-Charge.
Demolition of PCC cement concrete above ground floor and paving n.exc 15 cm thick (below or above ground level) un reinforced complete all as specified and directed by Engineer-in-Charge.
Material and labour for 100 mm thick Cement concrete type B-1, 1:2:4 (20mm graded stone aggregate) as in pavement finished even and fair complete all as specified and directed by Engineer-in-Charge.
M&L PCC 1:4:8 type D-2 (40mm graded stone aggregate ) for sub base 75mm thick complete all as specified and directed by Engineer-in-Charge.
Material and labour for vitrified Ceramic tiles 10mm thick Dark shade (Square/ rectangular) polished, area of each tiles n. exc 0.36 Sqm in floors etc,, set and jointed in neat cement slurry and pointed in shite or coloured cement to match over and including 20 mm thick screed bed in cm 1:6 complete all as specified and directed by Engineer-in-Charge.
All as per serial item No 63 above but in vertical surface such as skirting, dado and risers including 10 mm thick rendering in cm 1:4 on brick or concrete surfaces of wall to receive vertical tiles complete all as specified and directed by Engineer-in-Charge.
S&F 75mm size brass handles, cast type polished bright complete all as specified and directed by Engineer-in-Charge.
S&F magnatic catch for wooden cabinate shutters complete all as specified and directed by Engineer-in-Charge.
Dismantling timber scantling as in fillets, rails, posts, rafters, purlins, etc under 40 sq.cm in section of framed work complete all as specified and directed by Engineer-in-Charge.
M&L second class soft-wood as in scantlings of timber framed and fixed wrought complete all as specified and directed by Engineer-in-Charge.
M&L for 2nd class HW plain fillet n exc 3 sqcm square rectangular or triangular in section clean sawn secured with nails or brads complete all as specified and directed by Engineer-in-Charge.
Material and labour for 12mm thick Prelaminated particle, board, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work and fixed in repairs complete all as specified and directed by Engineer-in-Charge.
Material and labour for 18mm thick Prelaminated particle, board, exterior grade, prelaminated one side with decorative choice laminations & other side balancing white lamination, fixed with screws to timber frame work and fixed in repairs complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs continuous (piano) hinges mild steel bright finish or electrogalvanised 30mm flaps complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repairs Harrison rails 25 mm dia mild steel chromium plated curtain rail fixing with brackets stops complete all as specified and directed by Engineer-in-Charge.
M&L for Complete removal of existing treatment from walls, fins, chajja etc shall include brooming down or steel wire brushing, scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots and removing debris/ malba to low lying area out side of MOD land and applying 3 mm thick a layer of wall care water proof putty on scrapped/uneven surfaces to match with the existing surfaces before application of primer/distemper and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engineer-in-Charge.
Material and labour for preparation of old treated plastered surfaces of ceiling by brooming down or steel wire brushing scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots removing dust, dirt and all loose scales of existing treatment and applying one coat of oil bound distemper on ceiling complete all as specified and directed by Engineer-in-Charge.
M&L for coloured machine pressed Chequered cement concrete tiles 300x300x25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over and including screed bed 20 mm thick in CM 1:6 complete all as specified and directed by Engineer-in-Charge.
M&L for 60 mm thick precast cement concrete coloured interlocking tiles of grade M-35 any shape and size confirming to IS 15658-2006 with grey cement and pigment in floors / pavements incl 30 mm thick sand cushioning complete all as specified and directed by Engineer-in-Charge.
Taking down of old existing roof treatment of any description incl scrube and remove loose concrete, brick tiles, mud fuska, plaster, bitumen, oil grases and any other materials that might effect adhesion by wire brushing the surface and cleaning of the surface throughly with water and disposed off old materials from site complete all as specified and directed by Engineer-in-Charge.
M&L for 50 mm thick cement concrete 1:2:4 type B-0 ( using 12.5 mm graded stone aggregate) as in padding/ base on roof complete all as specified and directed by Engineer-in-Charge.
M&L for 20 mm thick plastering in CM 1:4 on RCC roof slab, finish even and smooth for receive water proofing APP membrane using WPC @ 3% by weight of cement complete all as specified and directed by Engineer-in-Charge. Note : WPC will be measured and paid separately.
Supply only Integral water proofing compound complete all as specified and directed by Engineer-in-Charge.
M&L for preparation of the plastered roof surfaces and fix the APP polymeric water proofing membrane of minimum 3 mm thickness & weighing not less than 3.6 Kg / Sqm , black finished reinforced with non-woven ployster 160 gsm matt with a thermofusible finish laid over primer conforming to IS:3384-1965 @ 0.5 Kg/Sqm and thereafter apply compitable hot blown bitumen 85/25 @ 1.20 Kg/Sqm torching overlaps with a propane or a butane gas torch with a overlap of 75 mm at the sides and 100 mm at the end sealing complete all as specified and directed by Engineer-in-Charge.
Taking down carefully aluminium point wiring (light, Socket or power) complete including fittings and fixtures such as switches, ceiling roses pendents, regulators, sockets etc for taking credit to be measured separetly including making good the disturbed portion/surface complete all as specified and directed by Engineer-in-Charge.
M&L for point wiring with colour coding multistranded copper conductor cable, PVC insulated FRLSH and unsheathed size 1.5 Sqmm with PVC concealed Conduit ( dia not les than 25 mm) with fixing accessories for one light /fan/bell point controlled by one switch with pressed steel concealed terminal boxes covered with 3mm thick laminated sheet incl. contineous earth wire of PVC insulated unsheathed multi stranded copper conductor cable size 1.5 Sqmm for earth wire connected to common earth dolly complete all as specified and directed by Engineer-in-Charge.
All as per item No 84 above but for one 3/5 pin socket 5 Amp on same board, with 1.5Sqmm wire with 1.5Sqmm earth wire.
All as per item No 84 above but for one 3/5 pin socket 5 Amp on independent board with 2.5 Sqmmwire with 2.5 Sqmm earth wire.
All as per item No 2 above but for 3 pins socket outlet 15 Amps independent with 4.0 sq mm incl contineous earthing with multistandred copper conductor PVC insulated unsheathed size 4.0 Sq mm. Note:- (For item 85 to 87 ) Cost making good disturbed surface below existing point wiring taken out vide item No 85 and cutting chases and making good of disturbed surfaces by cement & sand mortar (1:3) and surface finish as per adjustment surface conduit and all accessories as required for concealed point wiring vide item No 85 to 87 as applicable shall be deemed to be included in the unit rate quoted against these items.
S&F Modular switch flush type, 5/6 Amps, single pole one module white colour 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F Modular switch flush type, 15/16 Amps, single pole one module white colour 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F Modular socket 3 pins combined, 5/6 Amp, flush type (multi purpose) two module ,230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F Modular socket 5 /6 pins combined, 15A/16 Amp, flush type(multi purpose) two module 230 Volts, AC complete all as specified and directed by Engineer-in-Charge.
S&F Modular white cover plate with frame suitable for three module way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F Modular white cover plate with frame suitable for four module way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F Modular white cover plate with frame suitable for six module way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F Modular white cover plate with frame suitable for 08 module way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F Modular metal flush box suitable for three module way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F Modular metal flush box suitable for four module way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F Modular metal flush box suitable for six module way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F Modular metal flush box suitable for 08 module way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F switch piano flush type 5 Amps, single pole one way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F socket 3/ 5 pins, 6 Amp, flush type piano (multi purpose) 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F Socket 15 Amps flush type,3/ 6 Pin, 230 Volts, AC complete all as specified and directed by Engineer-in-Charge.
S&F switch 15 Amps flush type 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F in repair Ding Dong door bell 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F Bell push flush type 5 Amps, single pole one way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F Modular Bell push flush type 5 Amps, single pole one way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F ceiling rose, PVC / Polycarbonate isolated body ,surface backlite, 65x50mm, three terminals, 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F modular stepped type electronic fan regulator flush type,2-way 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F stepped type electronic fan regulator flush type 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F Batten holder PVC/Polycarbonate base / back suitable for LED lamp. 230 Volts, AC complete all as specified and directed by Engineer-in-Charge.
S&F LED Bulbs 9/10W B-22 Pin type 230 Volts , AC complete all as specified and directed by Engineer-in-Charge.
S&F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole 20 amps MCB complete all as specified and directed by Engineer-in-Charge.
S&F LED tube light fittings 20W (4 feet) wall mounted LED batten extruded PVC heat sink provided for efficient heat dissipation & integrated electronic driver optics diffused complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed by Engineer-in-Charge.
S&F LED 6000K (2’ feet), 10W Decorative LED lighting fixture with extruded PVC . heat sink, environmental friendly, energy efficient ready to use pack, complete and including taking down existing fittings complete all as specified and directed by Engineer-in-Charge.
S&F LED bulkhead luminaire 10W decorative type as per sample complete including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed by Engineer-in-Charge.
S&F LED building secuity light 25 watt made up of pressure die cast aluminium housing with mid power LED as lightening source and PC cover having top opening inbuilt LED driver with IP66 protection and impact resistance of IK-07 complete including GI bracket 3m long having 40mm dia with nut bolts, washers etc including electrical connection with copper cable from ceiling rose to fittings and including taking down existing fittings complete all as specified and directed by Engineer-in-Charge.
M&L for submain wiring with 2X6.0 SqmM+1X4.0SqmM Earth Wire single core PVC insulated FRLSH sheathed copper cable connecting to common earth dolly in and including heavy duty PVC concealed Conduit 25 mm dia and dismantling and taking down existing unserviceable wiring, all accessories complete all as specified and directed by Engineer-in-Charge. Note:Cost of earth wire deemed to be incl in this item.
S&F in repairs VTPN 4 way double door prewired distribution board TPN-DPX 125 MCCB including one No MCCB 125 Amps, 25 kA, 4 pole as incomer and suitable SPN/TP MCBs as outgoing double door type sheet metal enclosure 415V with 200 Amps rated standard busbar of suitable size plate and common neutral link without MCBs with blank plate suitable for 4 way complete and including taking down VTPN DB's complete all as specified and directed by Engineer-in-Charge. Note : Rates for MCCB and MCB SPN/SP/TP shall deemed to be included in the quoted rates.
S & F in repairs single pole and neutral sheet metal enclosures for Distribution board (DB's)suitable for MCBs fitted with bus bar , Neutral link ,Earth Bar and Din rail 240 V, 50 Hz supply double door SP&N DB system 12 ways complete all as specified and directed by Engineer-in-Charge.
S&F RCBOs for earth leakage,over load & short circuit protection 2 pole ,25 Amp rating, 300 mA capacity suitable for 240 Volts and including taking down existing MCB/ RCCB complete all as specified and directed by Engineer-in-Charge.
S&F MCB SPN 40-63 Amps 240V incl all termnials, fitting etc. including taking down complete all as specified and directed by Engineer-in-Charge.
S&F MCB SP 06 to 40 Amps 240V incl all termnials, fitting etc including taking down complete all as specified and directed by Engineer-in-Charge.
Supply & Fixing of Meter box sheet metal enclosure concealed type made of metal of size 32 x 25 x 14 cm having suitable incoming and outgoing openings for cables complete all as specified and directed by Engineer-in-Charge.
M&L for Refixing carefully serviceable fans / geysers etc any type from site on completion of civil and E/& M works incl making necessary connection with suitable copper wire and testing and incl taking down complete all as specified and directed by Engineer-in-Charge.
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6.3 mm thick burried directly in gorund (earth pit not less than 2.25 Mtr normal ground level),and top edge of earth plate not less than 1.5 mtr below normal ground level, connected to galvanised means of earth wire 4 mm dia with bolts, nuts & check nuts, and washers of galvanised iron protection pipe light grade of 15 mm dia and watering pipe medium grade of 20 mm dia and filled with alternate layer of charcoal and common salt, watering funnel with wire mesh, earth pit chamber and cover CI frame PCC 1:3:6 type C-2 all as shown in electrical plate No-3 of SSR part-I of 2009 connected to earthing test point all as specified and indicated including all earth work excavation, returning filling and disposal of surplus soil and testing on completion complete all as specified and directed by Engineer-in-Charge.
36SHRI RADHEY ASSOCIATES
High Tech Metal India
NAVEEN KUMAR TYAGI
airstack india
Gaurav India Corporations
UNIVERSAL ENTERPRISES
PG CONSTRUCTION AND COMPANY
stage.html
html • 0.04 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .