Construction of International size Synthetic Hockey Field of Global Category at Village Habri Block Pundri Distt. Kaithal (Pdg. Sub Station only)

Amount

MCCB ,DISTRIBUTION BOARDS, MCB's, RCCB's, CHANGE OVER etc. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. 23.22.1.4 TRIPLE POLE MCCB 125 to 160 Amp

23.22.1.12 4 pole MCCB 300 to 400 amp

MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings 23.22.2.2 MCCB up to 250 A FP

23.22.2.3 MCCB above 250 A and up to 630 A FP

23.26.1 Supply and erection of Medium Voltage caution notice plate of size 200*150 mm in three languages.

23.26.2 Supply and erection of High Tension Voltage caution notice plate of size 250*200 mm in three languages.

23.26.3 Supply and erection of shock restoration chart in glass frame.

23.26.4 Supply & Erection of mild steel bucket stand suitable for 6 Nos. fire buckets,(but without bucket) including the cost of welding and painting of complete stand will one coat of red oxide and 2 coats of approved paint of red colour with all labour and material required to complete the job in all respect up to the entire Satisfaction engineer in charge of the work (size 6'x4' made of GI pipe 32mm dia).

23.27.5 Supply and election of Godrej almirah type M.S. pedestal made of 50 mm *50 mm * 6 mm angle Iron frame with 3.00 mm thick M.S. sheet covering including shutters with suitable hinges and looking arrangement with the Godrich type handle including round bars. The to covering should have a downward overhang of 75 mm on all sides of pedestal, having two sets of water proof ventilation holes of suitable size on the sides, at top and bottom, each set containing four No’s. holes to discharge the heat produced by suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embedded upto the entire depth in 1:2:4 cement concrete block, projected 75 mm all around the pedestal and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in charge of the work. M.S. pedestal of size 1200 mm wide, 1500 mm high, 450 mm deep and bottom totally open , duly embedded in cement concrete block of size 1350 mm*600 mm*200 mm above ground level , having a base of size 1500 mm* 750 mm* 250 mm below ground level.

24.1.1 Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required.

24.1.2 Extra for using salt and char coal/coke for pipe earth electrode as required.

24.1.4 Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required.

24.1.5 Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode.

24.1.6 Supplying and laying 25mm x 3mm G.I. strip at 0.5 Mtr. below ground as strip earth electrode including soldering etc. as required.

24.1.9 Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required.

24.1.10 Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material.

24.2.7.5 Supply and erection of suitable compression type brass cable glands for underground Cable :- 120 sqmm to 185 sqmm Cable 3 to 32 Core

24.3.3.1 Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 70 to 120 sqmm

24.3.4 Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 70 to 120 sqmm

S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Mtr below ground level including diging and refilling of earth including cost of suitable size socket/cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. 24.5.2.5 DWC/HDPE pipe 120/105 mm outer dia/ inner dia

24.7 Providing RCC foundation of M20 grade (1 Cement:1.5 Stone aggregate: 3 Coarse sand) i/c excavation, steel reinforcement (Fe 500) @ 50 kg/cum of concrete contents, concrete cover 50mm, over a bed of 75mm thick PCC 1:5:10, of required dimensions as per OEM recommendations to provide levelled surface for placement of the DG set complete in all respects and as per directions of Engineer-in-charge (Size of foundation assumed = 5.0x1 .Bx1 .Om)

CIVIL ITEMS (USED COMMONLY IN ELECTRICAL WORKS) 24.10.2 Earth work in excavation in foundations, trenches etc. in all kind of soils, not exceeding 2 Mtr.s depth including dressing of bottom and sides of trenches, staking the excavated soil clear from the edge of excavation and subsequent filling around masonary, in 15cm layers with compaction, including disposal of all surplus soil, as directed with in a lead of 30 mtrs.

24.10.4 cement concrete 1:2:4 with stone aggregate 20 mm nominal size in Kerbs and the like items, finished smooth with 6 mm thick cement plaster 1:3 on exposed surface including from work, placing and fixing in position, complete at the ground level or in first storey

NS items Supply and erection of MS Channel 100x 50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (As per UHBVNL make and specification)

Supply and erection of MS angle 50x50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (As per UHBVNL make and specification)

Supply and erection of MS flat 50x6mm including cutting bending to the required shape drilling hole carriage Painting loading unloading complete in all respect upto the entire satisfaction of Engineer-in-charge. (As per UHBVNL make and specification)

Providing and fixing of Nut and Bolts of size as per ISI specifications of Engineer-in-charge. (As per UHBVNL make and specification)

Supply and erection of ACSR conductor 50sqmm (ISI Marked) with accessories including stringing and sagging of conductor of various sizes as well as jointing and binding with insulator at support complete in all respect up to entire satisfaction of Engineer-in-charge of the work.

Supply and erection of under ground Aluminum Armoured cable XLPE insulated loose in existing pipe or trenches complete with necessary connection. Make RR / Havells / Polycab/ Grandlay/ Suraj. 120 sqmm 3.5Core

185 sqmm 3.5Core

Supply/ Erection/ Testing/ Commissioning of 200 KVA.11KV1.433VAC HT transformer Oil cooled copper wound ONAN IS1180 Level-2 Off load tap changer Make Kirlosker/Crompton/ NGEF / Volt AMP.

Supply & Erection of cubical type dust and Vermin proof LT automatic power factor control panel 60KVAR capacity. suitable for automatic operation and control of power factor within the set limits free standing floor / wall mounting made out of 16 gauge M.S. sheet duly powder coated suitable for operation of 3 phase 4 wires 50 cycles per second 400/440V.A.C. supply equipped with the following. - 1 No. automatic power factor control relay of GE/L&T/ Neptune make. Incomer MCCB (35KA) = 100amp. with back up protection of HRC Connection from incomer MCCB to bus bar by means of copper wires of suitable size of requisite capacity insulated with PVC. 4 No. 10 KVAR & 4nos 3 phase 5 KVAR capacitor of L&T /GE / Neptune-ducat LL-10 (Mono16) long life make. (Total 60 / KVR) Installed and duly wired inside panel with axial flow fan controlled through thermostat. The panel will be complete with all internal wiring with PVC copper wire, inter connection etc. complete in all respect with all labour and material up to the entire satisfaction of the Engineer-in-charge of the work.

Supply & Erection of rubber mat of size 1Mx2 M X 6mm thick suitable for 11 KV ISI marked complete in all respect upto the entire satisfaction of the engineer In-charge of the work.

Pdg. And Fixing of wire mesh jali around the transfarmer of size 4' x 8' made out of 75 x 25 x 3.25 mm jali fixed with angel iron frame made out of M.S. Angel 50 x 50 x 6 mm.

Supply and erection of prestressed cement concrete pole as per IS : 1678-1960. 11 Mtr.s long 152 mm x 203 mm at top and 152 mm x 368 mm at bottom with working load of 360 Kg. burried 2.20 m in ground.

Supply and erection of HT XLPE cable 50 sqmm 3.5 core including the cost of i-bolt for holding of cable etc. including required material to erect on existing PCC pole complete in all respect up to entire satisfaction of Engineer-in-charge of the work.

Supply & erection of GSL wire 7/8 SWG conforming to ISS 280/1975/1963 with latest amendment complete in all respect upto the entire satisfaction of Engineer-in-Charge of the work

Supply & erection of lighting arrestor model ALPRO / Alastem / LEMCO make suitable for 11KV 3 Phase 50 HZ ground neutral system comprising of spare gape type queen gap type in series with non linger resitar element house in Horizontally scale poreclam bushing with line and ground terminal along with mounting clamps conforming to ISS 3070 (Part-I) of 1985 with latest amendment with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works.

Providing & fixing of stay set complete in all respect upto the entire satisfaction of Engineer-in-Charge.

Providing & fixing of stay wire complete in all respect upto the entire satisfaction of Engineer-in-Charge.

Supply & erection of 11KV pin insulator (Jayshree make) with pin with all labour and material required to the complete the job included the fixing the same on existing channels up to entire satisfaction of the Engineer-in-Charge of the works.

Supply & erection of 11KV gang operated switch Jayshree make conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing 'H'pole with the help of 3 Nos. channels of size 75mmx40mmx6mm, 1.8M long fixed with suitable size of MS clamp, nuts and bolts including cost of 6 Nos. 11KV insulator with GI pin, RD fuses and painting with 2 coat of approved paint and one coat of red oxide material required to complete the job in all respect up to entire satisfaction of the Engineer-in-Charge of the works.

Supply Erection Testing & Commissioning of 11kV indoor HT metering panel indoor / outdoor complete with C.Ts P.Ts Cubical .as per requirement / approved by UHBVNL consisting of the following. - Cubical panel free standing floor mounting type made out of sheet steel 16 SWG CRCA sheet with channel iron base frame spray painted with strong synthetic light grey enamel paint as per size and design approved by the UHBVNL. - 3 Nos. 11KV CTS of rating as approved by UHBVNL for indoor installation of approved make of UHBVNL. - 1 Nos. 11KVPTS 11000/10 VA burden 0.5 accuracy oil filled suitable for indoor installation of approved make of UHBVNL. The cubical panel will be completed in all respect including inter connection, internal wiring with PVC copper cable, its testing and approval of all item by UHBVNL cost of all testing/ approval charges or all items of UHBVNL with a guarantee of one year from the date of commissioning. including cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the engineer in charge of the work

Supply and Erection of HT Trivector (DLMS compliant Meter (Category-A) with all acessories for complete installation as per tech, specifitcaiton no CSC-45/Rev 11/DH/UH/P&D/2015-16 subject to change in parameters i.e. voltage ratio 33 KV /110V, 0.2 accuracy class, current ratio-/1A

Supply & Erection of fire buckets of 9 ltr. capacity made out of 24guage G.l sheet and duly painted with one coat of red oxide and 2 coats of approved paint in red colour and written with the fire' as per fire protection necessar sand filling in the bucket hung the bucket on stand with all labour and material required to complete the job all respect up to entire satisfaction of the Engineer m charge of the work

Som Nath Contractor