Installation, testing, and commissioning of 50000 GPH X 250Mtr H C Pump set Head along with allied works at Pumping Station Hut under upgradation of water supply by way of providing installation testing and commissioning of stand by machinery (un

Amount

Foundation Block :- Laying of foundation block by way of earth work in bulk excavation around the foundation block of Size (2.8Mtr.X1.3mtrX 1.4mtr) (LXWXD) Then abrication of bolts of size 16 mm x 0.5 mtr long 4/6 No. by threading them at one and making of anchors to the other end. Supplying fabrication and placing steel reinforcement (HYSD FE-415) for all RCC work including cutting, bending placing in position and binding/ welding complete cost of binding wire/ welding. The job further includes laying M-15 grade cement concrete with form work, machine mixing, laying compaction, curing etc. using stone aggregate 20 mm nominal size foundation block using 1:2:4 nominal mix (1 cement, 2 coarse sand, 4 graded stone ) aggregate as per specification. Placing the already fabricated anchor bolts in proper vertical position at reqd. distance and welding with the mesh of the block prior to laying of the block and finally plastering the exposed surface of the block with CM 1:2 ratio and curing to get required strength. The whole job includes cost of material and carriage charges for all material from various sources by mechanical transport as well as head load, hire charges of shuttering material, vibrator and concrete mixture and welding set, POL for vibration and concrete mixture, labour charges for laying of foundation block, including skilled and semi-skilled workers deployed for execution of job.

Carriage:- Carriage of pumping machinery(Pump, motor, coupling set, base frame, starter) from store to site of work by mechanical transport, unloading near site of work, shifting/handling the machinery and other required material upto pump room at pumping station Hut. The job also includes dismantling the pumping unit unfastening the coupling bolts, nuts, bolts of base frame for separating each component viz. motor pump coupling set, base frame for their easily handling and carriage complete

MS Bed Frame:- Installation of foundation block. The job includes the foundation block of ISMC section of the bed plate of its placement on 04 Nos. MS foundation bolts (already grouted in RCC foundation block) and then fastening the bed frame with foundation bolts using hexagonal mild steel fasteners. The job also includes removing the dust, dirt and rust from the bed frame with the help of wire brushes, fine steel scrapper, wooden scrappers, sand paper, emery cloth then applying the primary coat of red oxide and then finally painting with 2 or more coats with black anticorrosive bituminous paint and brushing it to give smooth and even surface..The job further includes laying of base frame over the bed frame and leveling it properly in horizontal and vertical position. Then welding the bed plate and base frame with 6 mm thick continuous fillet weld with special purpose welding super bond electrodes from all the four sides in two layers. All the welding flux formed due to welding shall be removed by chipping and grinding to give it smooth and even surface. Job includes cost of material incl. manual carriage of material for working at site. Complete job in all respect

Mounting of pumpset:- Mounting and installation of new pump and motor on the base frame, leveling it horizontally and vertically. Then fitting of coupling pulley set on pump and motor shafts and fitting of coupling bolts with rubber bushes and nuts/ washers. Job also includes carriage of pumpset from Store to the station on head load and by dragging to the site of work . Complete job in all respect

Suction/Delivery:- Laying of 200mm dia MS 10mtrs.(approx.)or as per site requirement suction line/delivery line from the sluice valve of the clear water sump tank to the suction end of the H.C pump at p/station Hut. The job includes cutting of the 200 mm dia MS pipe in the convenient lengths/ as per site condition with the help of oxygen acetylene gas cutting system. The cut edges shall be grinded with grinder to give then a smooth and even surface. Then laying, aligning welding of 200mm MS pipe 3mtrs.m in length ( apporx) in continuous fillet weld of 6mm in three layers of Advani make super bond welding electrodes of 4mm and 3.14 mm dia. The job includes fabrication of bends negotiated in laying of as per the site conditions. Then providing / fabrication of 5 nos M.S flanges having 200 mm O.D & 200 mm ID having thickness 6 mm. The job includes providing of MS plate 6 mm thick 200mm x 200mm. Cutting 200mm outer circular cut and 200mm inner circular cut with oxygen acetylene gas cutting system and finishing on heavy duty lathe from both sides drilling of holes 4 Nos.,5/8 dia at equal spaces in three operations making of groove from proper fitting of packing sheet. The job also includes fabrication of 2 Nos. 90 degree bend out of 200mm MS pipe by cutting it into required pieces and welding at regd. angle. then fitting the one bend with suction flange of HC pump and flanged end of the 200 mm MS pipe with P/F of rubber sheet and reqd. no. of 5/8” 3” long high tensile MS bolts with nuts and spring washers etc and then testing the system on mechanical load. Job also includes extension suction/Delivery Manifold with 600mm dia MS pipe with allied items as per site requirement. Complete Job includes cost of material labour charges, carriage charges and charges for carrying tools-tackles for sit work. Complete job

Cast Iron Sluice Valve(1no):- Providing and fitting of heavy duty cast iron Sluice valve 200mm dia at Pumping Station Hut by way of cutting of pipe and P/f of new valve with the help of MS flanges, leather sheet and allied nut-bolts with washers etc. Complete Job Cast Steel Sluice Valve(1no):- Providing and fitting of heavy duty cast Steel Sluice valve(1no) 200mm dia PN3 at Pumping Station Hut by way of cutting of pipe and P/f of new valve with the help of MS flanges, leather sheet and allied nut-bolts with washers etc. Complete Job Cast Steel NRV(1no):-Providing and fitting of heavy duty cast Steel NRV 200mm dia PN3 at Pumping Station Hut by way of cutting of pipe and P/f of new valve with the help of MS flanges, leather sheet and allied nut-bolts with washers etc. Complete Job Cast Steel NRV (2no):-Providing and fitting of heavy duty cast Steel NRV 300mm dia PN3 at Pumping Station Hut by way of cutting of pipe and P/f of new valve with the help of MS flanges, leather sheet and allied nut-bolts with washers etc. Complete Job

Copper cable :- Providing and fitting of copper cable 37/14 SWG Providing and fitting new copper cable 37/14 SWG approximately-60mtr From Panel to Motor approximately 60mtr with thimbling to end terminal of cable by soldering process, tightening the electric connections and connecting the power supply and then testing the system on loaded and unloaded condition at site. Complete job Aluminum Cable:- Providing and fitting of Single core 400Sqmm Aluminum cable approximately-45mtr From Voltage Stabilizer to panel by thimbling, tightening the electric connections and connecting the power supply and then testing the system on loaded and unloaded condition at site. Complete Job Main Switch:-Providing and fitting of 1000Amp,415Volt, 3Phase good quality Main Switch HRC type at P/Station Hut. Job involves drilling of holes in the panel board. Providing & fitting of nuts, bolts & washers etc. Connecting all the electric connections using thimbles & then testing on full load condition. Complete job includes cost of material, labour charges, Carriage charges& fitment charges at the site of work. Complete Job Modification of LT control Panel :-Modification of Existing LT control Panel Installed at Pumping Station Hut by way of P/f of contactor MNX 550 Amp-1no and MNX400Amp-1no With Auxillarys. Fabrication and fitting of aluminum Bus Bar of required gauge and size, P/f of timer, single Phase preventer and control wiring. Job also includes cutting , welding of panel box and painting the same. Assembling of panel and testing on loaded condition at site. Complete job includes cost of material, labour charges, taxes and charges for carrying tools-tackles for site works. Complete job Painting:- Cleaning all the surface of suction and delivery lines along with suction and delivery manifold by scrubbing with emery paper sand paper with brushes and then applying a single coat of red oxide primer drying out at moderate temperature then applying two caots of black outgoing feeder. Complete job in all respect

parveen engineering works

Rishabh Electricals and Mechanical Works

M.S J K HYDRAULIC ENGGG AND FABRICATOR WORKS