REPAIRS REFURFACING TO CERTAIN ROADS ROAD FURNITURE AT DIAT AND MILIT GIRINAGAR PUNE

Amount

Repair to pot holes any depth not exc 1 sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25 mm in depth making good by applying tack coat @ 5Kg/10 Sqm putting in premixed bituminous macadam, well rammed and sealed with binder with 6.80 kg per 10 sqm, blinded with 0.06 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm complete all as specified and directed.

M&L for preparation of existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning with gunny bags to remove all loose dirt etc. and applying evenly a tack coat of paving bitumen VG-10 conforming to IS:W-73:2006 @ 5 Kg/10 Sqm of road surface with mechanical sprayer, operated by hot pressure mechanism complete all as specified & directed.

M&L for providing and laying 75mm or less thickness (Consolidated thickness) premix bituminous macadam (design mix) with crushed and graded coarse stone aggregate filler (cement) and sand (fine aggregate) mixed with 4% binder content using paving bitumen by VG-30 grade by weight of total mix, mixing bituminous macadam in Hot mix plant and laid with mechanical paver complete & rolled to required camber and gradient by using 8 to 10 tonne power roller complete all as specified and directed. NOTE :- The design mix for BM shall be carried out by contractor from approved NABL Lab / Institute / Govt Engg College as directed and design charges thereof shall deemed to be included in the unit rate quoted by the contractor.

M&L for providing and laying bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5.5% binder content VG-30 conforming to IS: W-73:2006 paving bitumen content by weight of total mix, rolled and compacted to required camber and gradient by using 8 to 10 ton power roller complete all as specified and directed. NOTE:- (i) Mixing of SDAC shall be carried out in hot mix plant. Laying of bituminous premix semi dense asphaltic concrete shall be done only by using authomatic type censor paver. (ii) The design mix for bituminous premix semi dense asphaltic concrete shall be carried out by contractor from approved NABL Lab / Institute / Govt Engg College as directed and design charges thereof shall deemed to be included in the unit rate quoted by the contractor.

M&L for road marking 2.50mm thick centre line, Side line, stop line, dashes, arrows, barckets and similar work on road surfaces as per IRC pattern with thermo plastic paint of approved quality and make with 8% glass beads laid at temprature 160 degree celcious with a special applicator machine complete all as per manufacturer's instructions and traffic diversion arrangement complete all as specified & directed.

Supply and fixing metal tubulr dealineator made out of ABS round body fitted with 2 Nos 65mm dia highly reflective reflectors made out of PMMA and mounted on 45 / 50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed. Note : Reflectors shall be positioned at the best eye guiding level so that drivers shall be warned from a safe distance.

S&F solar stud aluminium alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4 V/0.3 Watt one NI-ed rechargable battery (1.2 V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufacturer's insturctions etc complete all as apecified and directed.

S&F cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No DA 972.0 fixed with and including MS stud of suitable size as per manufaturer's instructions complete all as apecified and directed.

M&L for preparation of old plastered surfaces of kerb stone of any description over 10cm girth or width not otherwise described and applying two coats of synthetic enamel paint complete all as specified & directed.

SHREE KALIKA CONSTRUCTION (BID ID -3072170)

MOHANLAL MATHRANI CONS. PVT. LTD. (BID ID -3073320)