REPAIRS TO FENCING, PATH, BATHROOM/TOILET, SANITARY FITTINGS, INTERNAL WATER SUPPLY LINE, TILING, PLINTH PROTECTION AND CERTAIN MISC WORKS AT AF STN PURNEA

Amount

Taking down cement plaster on walls, including racking out joints, hacking for key, scrubbing down with water etc. and remove rubbish from site of work complete all as specified & as diretced.

M & L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified & as diretced.

M & L for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and fair without using extra cement complete all as specified & as diretced.

M & L for rendering 5mm thick on fair faces of ceiling concrete surface in cement mortar 1:3 finished even and smooth without using extra cement complete all as specified & as diretced.

M & L for preparation of new wall surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified & as diretced.

M & L for preparation of old wall surfaces including complete removal of all existing treatement, washing rubbing down and applying two coats of OBD over a coat of primer complete all as specified & as diretced.

M&L for preperation of new plastered surfaces and applying two coat of cement base paint including priming plastered and other surfaces with one coat of alkali resistant priming paint complete all as specified and as directed.

M&L for preperation of old plastered surfaces and applying two coats of cement base paint incl priming plastered and other surfaces with one coat of alkali resistant priming paint complete all as specified and as directed.

M & L for preparation surfaces of new ceiling surface and applying three coats of white wash complete all as specified & as diretced.

M & L for preparation surfaces of old ceiling surface and applying three coats of white wash complete all as specified & as diretced.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land, complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 75 mm thick PCC 1:3:6, type C-2 (40mm graded stone aggregate) as in plinth protection including finishing surface without using extra cement, complete all as specified and as directed.

M&L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone aggregate ) as in sub-base complete all as specified and as directed.

M&L for 25mm thick PCC 1:2:4 type B0 (using 12.50 mm graded crushed stone aggregate) surface finished even and rough in sub floor/levelling course to recieve floor finishes complete all as specified and as directed.(Window cill)

M&L Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortor 15mm thick in cement mortar 1:6 for laying on floor finishing complete all as specified and as directed.

M&L coloured vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed or bedding layer of mortor 15mm thick in cement mortar 1:6 for laying on floor finishing complete all as specified and as directed.

All as per serial item No. 17 here-in-before but as in verticle surfaces such as skirting/dado laid over 10 mm thick cement plastering in CM 1:6 on brick or concrete surface complete all as specified and as directed.

M& L glazed ceramic tiles in vertical surfaces of size 450x350x7/ 350x250x7 mm thick set and jointed in neat cement slurry and poited in coloured cement to match confirming to IS-13712 Z (b) (iii) over and including rendering 10mm thick of cement plaster in cement mortar (1:6) for backing of tiles complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for re fixing bore of pipe 15 mm, complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for re fixing bore of pipe 20 mm, complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for re fixing bore of pipe 25 mm, complete all as specified and as directed.

Material and labour for fixing of GI tube medium grade 15 mm bore with all fittings as required at site and fixed to walls and ceiling or laid on floor including connecting with existing lines complete all as specified and as directed.

Material and labour for fixing of GI tube medium grade 20 mm bore with all fittings as required at site and fixed to walls and ceiling or laid on floor including connecting with existing lines complete all as specified and as directed.

Material and labour for fixing of GI tube medium grade 25 mm bore with all fittings as required at site and fixed to walls and ceiling or laid on floor including connecting with existing lines complete all as specified and as directed.

Material and labour for fixing GM globe/gate valve 20mm bore with iron wheel head, screwed both ends for iron pipes, ISI marked, conf to IS including taking down old unserviceable ones, complete all as specified and as directed. Note: Union or long screw have to provided before fixing of gate valve if required rate shall be deemed to be inclusive in the quoted rates.

All as per item No 26 here-in-before but 25mm bore GM globe/gate valve, complete all as specified and as directed.

S&F in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor with concrete including trap set complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan ( pedestal pattern) , white, including providing of plastic seat cover for pedestal pan, back, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device ( excluding fixing bolts, flushing cistern and flush pipe) etc complete all as specified and as directed.

S & F in repair PVC valveless, syphonic action type low level flushing cistern 10 ltrs capacity white with intel ball value, float valve and handle incl brackets, PVC flush pipe complete all as specified and as directed.

Supply and fixing in repairs vitreous China wash basin, white, flat back, size 550 x 400mm including 32mm dia waste coupling CP, with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed and brackets including cutting for and pinning in ends of brackets or errecting stand etc. and including PVC waste pipe fitted with CP coupling for required length, complete all as specified and as directed.

S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm long etc, complete all as specified and as directed.

S&F in repairs 110 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall, including necessay clamp to be provide for fixing of PVC SWR pipes, complete all as spcified and as directed.

S&F in repairs 75 mm dia PVC SWR pipes single socketed in any length with rubber ring joints, fixed to wall, including necessay clamp to be provide for fixing of PVC SWR pipes, complete all as spcified and as directed.

S&F PVC (SWR)75mm bend bore bends with access door any radius, complete all as spcified and as directed.

S&F PVC (SWR)110 mm bend bore bends with access door any radius, complete all as spcified and as directed.

S&F 110mm PVC (SWR) branch piece single (single Y) equal or unequal with access door, complete all as spcified and as directed.

S&F 110mm PVC (SWR) junction single (single T) equal or unequal with access door, complete all as spcified and as directed.

S&F in repairs fancy type with wall flange bib taps long body, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed, complete all as specified and as directed.

S&F in repairs stop valves 15mm dia, cast copper alloy chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, but fancy type, chromium plated with long shank and cup (concealed type), complete all as specified and as directed.

S&F in repairs pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore and fixed, complete all as specified and as directed.

S&F pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe 15mm bore and fixed, complete all as specified and as directed.

S&F in repairs of waste filtting (coupling), brass chromium plated for 32mm dia glazed ware sink , basin, urinal etc. with long screwed shanks and fly nuts flazed ends bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs PVC (SWR) multi floor trap with grating including jointing with solvent cement with outlet of 75mm, complete all as specified and as directed.

S&F in repairs kitchen sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, coupling including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx460mm bowl size 410 mmx330mmx 160mm etc complete all as specified and as directed.

S&F in repairs fancy type tubular towel rail brass, 20 mm dia ‘D’ type 60 cm long between flanges of brass chromium plated including brackets, brass screws and wooden/ plastic cleats complete all as specified and as directed.

M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified and as directed.

S&F in repair PVC waste pipe for WHB and basin 32mm dia of length 800mm PTMT complete all as specified and as directed.

S&F in repair PVC waste pipe for urinal/kitchen sink 38/40mm dia of length 800mm PTMT complete all as specified and as directed.

S&F in repairs vitreous China Urinal, Half stall type, white, with PTMT spreader including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe), complete all as spcified and as directed.

Dismantling water tank any type and any position from site of capacity exc 250 litres and n exc 500 litres, complete all as specified and as directed.

Dismantling water tank any type and any position from site of capacity exc 500 litres and n exc 1000 litres, complete all as specified and as directed.

S&F 500 litres Rotational moulded polyethylene water storage tanks double layer (Cylinderical veertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and including fixing of 20 mm PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and including all accessories of fittings for tank fixed, complete all as specified and as directed.

S&F 1000 litres Rotational moulded polyethylene water storage tanks double layer (Cylinderical veertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and including fixing of 20 mm PTMT ball valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and including all accessories of fittings for tank fixed, complete all as specified and as directed.

S&F in repairs sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12mm wide with CP brass bracket guard railing 60cm long complete all as specified and as directed.

S&F in repair brass CP wall mixer with telephone shower arrangement, connecting legs & wall flanges but without crutch & telephone shower for mixing hot and cold water for wall screwed down for iron pipe and fixed, any type including all necessary fittings complete all as specified and as directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood thrusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n.exc 1.50sqm each and removing from site and making good disturbed surfaces of wall in CM (1:3) complete all as specified and as directed.

Supply and fixed PVC door frame of size 50mm X 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, fixing in opening as per specification and all as per drawing, complete all as specified and as directed.

S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with neat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuct inside the solvent cement for styleand plain coloured PVC sheet for top rails, lock rails and bottom rails on either side and as gap insert for top rails and bottom rail panelling of plaincolour PVC sheet to be fitted in the MS frame welded to the style and rails with suitable PVC sheet beading and jointed together with solvetn cement supplying and fixing in the frame at site as per specification and as per drawing, complete all as specified and as directed.

S&F for mild steel butt hinges, medium weight, colled rolled ISI marked of size 100mm complete all as specified and as directed.

S&F for aluminum anodised barrel tower bolt 150 mm long of extruded section, complete all as specified and as directed.

S&F for extruded aluminum handle 125 mm long fabricated type anodised complete all as specified and as directed.

S&F in repairs fancy type with wall flange two way bib taps, chromium plated cast copper alloy 15mm bore with crutch or butter fly handle, screwed down, & fixed, complete all as specified and as directed.

S&F in repairs of CP 2 in 1 health faucet with 1 mtr tube & hook (hand shower) chromium plated, complete all as specified and as directed.

S&F in repairs of push cock 15 mm (female thread) any colour high pressure of PTMT screwed for 15mm bore dia of iron pipe, (Minimum weight 15mm-47gms), complete all as specified and as directed.

S&F in repairs of urinal push cock 15mm any colour high pressure of PTMT screwed for 15mm bore dia of iron pipe, (Minimum weight 15mm-47gms), complete all as specified and as directed.

S&F in repairs of PTMT type bib taps of any colour high pressure 15mm bore with crutch or butterfly handle, pressure screwed for iron pipe and fixed, (minimum weight 15mm-90gms), complete all as specified and as directed.

S&F in repair of liquid soap container of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 105gms), complete all as specified and as directed.

S&F in repairs of towel ring (round) of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms), complete all as specified and as directed.

S&F in repairs of swivel shower of PTMT 15mm any colour for fixing with 15mm pipe (Minimum weight 40gms), complete all as specified and as directed.

S&F in repair of shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour (Minimum weight 40gms), complete all as specified and as directed.

S&F in repair of towel rail 600mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C) any section, including taking out embedded portion and making good disturbed ground, post embedded in natural ground, complete all as specified and as directed.

All as per item No 75 above but post embedded in concrete, including demolition of old concrete foundation complete all as specified and as directed.

Dismantling fencing wire mesh, any type, complete all as specified and as directed.

Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n.exc 50m and making good surface (Soft/loose soil), complete all as specified and as directed.

M&L cement concrete type 1:3:6 type C-2 (40 mm graded stone aggregate) as in foundation filling and mass concrete, complete all as specified and as directed.

M&L cement Concrete 1:2:4 type B2, using 40 mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and as directed.

S&F mild steel angle/flat iron supports for posts/strut for securing barbed/chain link fencing any description including drilling holes, notching for wire etc , conforming to FE 290 (Gde -E-165) complete all as specified and as directed.

S&F mild steel round bars as line bars for fixing chain link fencing, conforming to FE 410 W( Gde-E-250) quality or FE 290 (Gde -E-165) complete all as specified and as directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square but (dia of neck 10mm and 10cm long) complete all as specified and as directed.

Supply only chain link fencing net MS galvanised, made out of GI wire of 8 to 10 mm gauge, aperature not exceeding 65 mm, weight not less than 3.5 kg/sqm complete all as specified and as directed. Note : Payment shall be allowed after ascertaining weightt of chain link as per actual at site through BOO as ordered by GE.

Fixing only chain link fencing including line wires, any mesh, size and type of any type of standards, rails, straining bolts, etc including provision of binding wire, complete all as specified and as directed.

M&L for preparation of new or previously untraeted steel surfaces of any description exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.

M&L for reinforced cement concrete type B-1, 1: 2: 4 (using 20mm graded stone aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc for fencing, average sectional area exc 100 sq cm and n exc 250 sq cm with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and as directed and fixed. Note:- PCC foundation measured and paid separately under relevant items.

M&L for reinforced cement concrete type B-1, 1: 2: 4 (using 20mm graded stone aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc for fencing, average sectional area n.exc 100 sq cm with or without chamfered angles and flat, splayed, rounded or mitred tops complete all as specified and as directed and fixed. Note:- PCC foundation measured and paid separately under relevant items.

M&L for mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 MM dia or securing with iron clips, complete all as specified and as directed.

M&L for mild steel TMT bars 5mm dia and over upto and including 10mm dia dia in stirrups, binders, spacers etc, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia, complete all as specified and as directed.

Supply and fixed for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, includig, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed. (each line wire to be measured)

Supply and fixed as in repair for galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, includig, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and as directed. (each line wire to be measured)

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft /loose soil complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point in soft soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

M&L for hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and as directed.

M&L preparation new plaster surface and applying three coats of white wash on fencing post complete all as specified and as directed. Notes:- The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount.

MSRAMANUJSINGHSONS