AR SR MOW others work and deposit works at Govt. buildings in Profesor Colony Section under City Sub Dn. No.2 PWD. Bhopal.

Please Enable Macros to View BoQ information

SCHEDULE OF ITEMS

General description of work : A/R , S/R , MOW, Others work , and Deposit works at Govt. Buildings in Profesor colony Section , under City Sub- Dn N0. - 2 P.W.D Bhopal.

Probable Amount of contract : Rs. 51.00 Lakh.

Time Allowed : Eleven months i/c rainy season . Sor 01.01.24

S.No SOR Item Particulers of Item Unit Rate Rmks

0.9 Transportation by manual labour including loading, unloading and stacking for lead up to 50 metre.

1.2.1 Lime, moorum, building rubbish cum

1.2.2 Earth cum

1.2.3 Manure or sludge cum

1.2.4 Excavated rock cum

1.2.5 Sand, stone aggregate below 40mm nominal size cum

1.2.6 Stone aggregate 40mm nominal size and above cum

1.2.7 Stone soling cum

1.2.8 Bricks 1000 Nos.

1.2.9 S.W. Pipes

1.2.10 R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and reinforced cement pipes

2 0.0 Add extra for every additional lead of 50 metre or part thereof.

1.3.1 Lime, moorum, building rubbish cum

1.3.2 Earth cum

1.3.3 Manure or sludge cum

1.3.4 Excavated rock cum

1.3.5 Sand, stone aggregate below 40mm nominal size cum

1.3.6 Stone aggregate 40mm nominal size and above cum

1.3.7 Stone soling cum

1.3.8 Bricks 1000 Nos.

1.3.9 S.W. Pipes

3 1.3.10 R.C.C. pipes, Steel cylinder, R.C. pipes, C.I. pipes, and unreinforced cement pipes

4 0.0 Surface dressing of the ground including removing vegetation and in- equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. in all kinds of soil. 2.1 100 sqm

5 0.0 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. 100 sqm

6 0.9 Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. 100 sqm

7 0.9 Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunks and branches removing the roots and stacking of serviceable material and disposal of unserviceable material.

2.4.1 beyond 30 cm girth up to and including 60 cm girth each

2.4.2 beyond 60 cm girth up to and including 120 cm girth each

2.4.3 beyond 120 cm girth up to and including 240 cm girth each

2.4.4 above 240 cm girth each

8 0.0 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth up to 50 m lead and lift up to 1.5 m, disposed soil to be levelled and neatly dressed, All kinds of soil sqm

9 0.0 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed. (No extra lift is payable if work is done by mechanical means) All kinds of soil cum

10 0.0 Earth work in excavation/ by mechanical means (Hydraulic Excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including dressing of sides and ramming of bottom disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.

2.7.1 Ordinary rock cum

2.7.2 Hard rock (requiring blasting) cum

2.7.3 Hard rock (blasting prohibited) cum

11 0.0 Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (No extra lift is payable if work is done by mechanical means)

2.8.1 Ordinary rock cum

2.8.2 Hard rock (requiring blasting) cum

2.8.3 Hard rock (blasting prohibited) cum

12 0.0 Excavating trenches of required width for pipes, cables, etc. including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m including getting out layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : (No extra lift is payable if work is done by mechanical means) in all kinds of soil

2.9.1 Pipes, cables etc., not exceeding 80 mm dia. metre

2.9.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. metre

2.9.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600 mm. metre

13 Extra for excavating trenches for pipes, cables etc. in all kinds of soil for depth exceeding 1.5 m, but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre). metre

14 Extra for excavating trenches for pipes, cables, etc., in all kinds of soil for depth exceeding 3 m in depth, but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) metre

15 Excavating trenches of required width for pipes, cables, etc., including excavation for sockets, depth up to 1.5 m including including consolidating each deposited layers by ramming, watering etc. stacking serviceable material for measurements and disposal of unserviceable material as directed, within a lead of 50m :

2.12.1 Ordinary rock :

2.12.1.1 Pipes, cables etc. not exceeding 80 mm dia. metre

2.12.1.2 Pipes, cables etc. exceeding 80 mm dia but not exceeding 300 mm dia. metre

2.12.1.3 Pipes, cables exceeding 300 mm dia but not exceeding 600mm dia metre

2.12.2 Hard rock (requiring blasting)

2.12.2.1 Pipes, cables etc. not exceeding 80 mm dia. metre

2.12.2.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. metre

2.12.2.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia metre

2.12.3 Hard rock (blasting prohibited)

2.12.3.1 Pipes, cables etc. not exceeding 80 mm dia. metre

2.12.3.2 Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia. metre

2.12.3.3 Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia. metre

16 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 1.5 m in depth but not exceeding 3 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) metre

17 Extra for excavating trenches for pipes, cables, etc. in ordinary/hard rock exceeding 3m in depth but not exceeding 4.5 m. (Rate is over corresponding basic item for depth up to 1.5 metre.) metre

18 Close timbering in trenches including strutting, shoring and packing cavities (wherever required) complete. (Measurements to be taken of the face area timbered).

2.15.1 Depth not exceeding 1.5 m. sqm

2.15.2 Depth exceeding 1.5 m but not exceeding 3 m. sqm

2.15.3 Depth exceeding 3 m but not exceeding 4.5 m. sqm

19 Close timbering in case of shafts, wells, cesspits, manholes and the like including strutting, shoring and packing cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered).

2.16.1 Depth not exceeding 1.5 m. sqm

2.16.2 Depth exceeding 1.5 m but not exceeding 3 m. sqm

2.16.3 Depth exceeding 3 m but not exceeding 4.5 m. sqm

20 Close timbering over areas including strutting, shoring and packing, cavities (wherever required) etc. complete. (Measurements to be taken of the face area timbered) :

2.17.1 Depth not exceeding 1.5 m. sqm

2.17.2 Depth exceeding 1.5 m but not exceeding 3 m. sqm

2.17.3 Depth exceeding 3 m but not exceeding 4.5 m. sqm

21 Extra for planking, strutting and packing materials for cavities (in close timbering) if required to be left permanently in position. (Face area of timber permanently left to be measured). sqm

22 Extra rates for quantities of works, executed:

2.23.1 In or under water and/or liquid mud, including pumping out water as required. metre depth

2.23.2 In or under foul position, including pumping out water as required. Note: - The extra percentage rate is applicable in respect of each item but limited to quantity executed in difficult conditions. The depth shall be reckoned correct to 0.1 metre. 0.05 metre or more shall be taken as 0.1 metre and less than 0.05 metre ignored. metre depth

23 Filling available excavated earth (excluding hard rock/Ordinary rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. cum

24 Extra for every additional lift of 1.5 m or part thereof in excavation. (No extra lift is payable if work is done by mechanical means)

2.25.1 All kinds of soil. cum

2.25.2 Ordinary or hard rock. cum

25 Supplying and filling in plinth with crusher stone dust / coarse sand under floors including, watering, ramming and compacting in layers not exceeding 20cm in depth and dressing complete Note: - Maximum thickness of this layer shall be 20 cm. cum

26 Supplying and filling in plinth under floors including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete.

2.27.1 With hard muram having CBR >12 % at under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 20cm in thickness and dressing complete. (Note:- maximum thickness of this layer to be provided shall be 30cm) cum

2.27.2 Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. cum

27 Excavating holes more than 0.10 cum & upto 0.5 cum including getting out the excavated soil, then refiling the soil as required in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering etc., disposing of surplus excavated soil; as directed within a lead of 50 m and lift upto 1.5m.

2.28.1 All kinds of soil. each

2.28.2 Ordinary rock each

2.28.3 Hard rock (requiring blasting) each

2.28.4 Hard rock (blasting prohibited) each

28 Supplying chemical emulsion in sealed containers including delivery as specified. (Chlorpyriphos/ Lindane emulsifiable concentrate of 20%) liter

29 Diluting and injecting chemical emulsion for POST- CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :

2.30.1 Along external wall where the apron is not provided using chemical emulsion @ 7.5 liters / sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall and rodding etc. complete, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. metre

2.30.2 Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. metre

2.30.3 Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diametre holes and plugging with cement mortar 1 :2 (1 cement : 2 sand) to match the existing floor, With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. sqm

2.30.4 Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling 10mm dia and 200mm deep

holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 sand) to the full depth of the hole, with Chlorpyriphos/ Lindane E.C. 20% with 1% concentration. metre

2.30.5 Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. metre

30 Deduct for disposed soil not levelled and neatly dressed. cum

31 Preconstruction antitermite treatment to the building under construction by providing.Stage 1: Treatment should not be carried out when it is raining or when soil is wet with rain or subsoil water. This also applies to fill up soil within the plinth area before laying the subgrade for flooring. sqm

32 Making bore holes for providing dowel bars at designed depth in rock foundation by drilling 40 mm dia bore hole in rock including necessary bending hooking, in position and grouting with cement slurry etc. complete as per drawing and specification. (Steel to be paid separately). metre

33 Excavation in soil using hydraulic excavator and including cutting and loading in tippers, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- section, and transporting to the appropriate ground contour, location and levelling and dressing earth neatly with all lifts and lead upto 1000 metre. cum

34 Earth work in rough excavation by any means and banking\filling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne in embankments for roads, flood banks, marginal bank and guide bank of filling up ground depression within campus, lead upto 50m and all lift. All kinds of soil. cum

35 Banking\filling excavated earth in layers not exceeding 20cm in depth, breaking clods, watering rolling each layer with 1/2 tonne roller or wooden or steel rammers etc. and rolling every 3rd and top-must layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal bank and guide bank etc. lead upto 50m and lift upto 1.5m. All kinds of soil. cum

36 Deduct for not rolling with power roller of minimum 8 tonnes for banking\filling excavated earth in layers not exceeding 20cm in depth. cum

37 Deduct for not watering with the excavated earth for banking\filling cum

38 Providing and laying of permanent piping technology anti-termite treatment before flooring work by installing LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm I.D.with inbuilt pressure compensation chip at every 30 cm interval in the tube,. The contractor shall submit approved line plan for piping system and junction boxes dully approved by Engineer-in- charge with bond of 5 year warranty.

2.39.1 Permanent piping system with Junction boxes sqm

2.39.2 Anti-termite chemical injected area sqm

39 Ploughing the existing ground to a depth of 15 cm to 25 cm and watering the same. (All kinds of soil) sqm

40 Providing , laying, spreading, and compacting, brick bats in uniform thickness 250 mm with hand packing, rolling, with vibratery roller 8-10 tonnes in stages to proper grade, watering and compacting to required density. sqm

41 2.42 Ground and embankme nt filling Supplying and filling in Ground and embankment including watering ramming consolidating in layers not exceeding 20cm in depth and dressing complete.

2.42.1 Supplying and filing in plinth with soil (other then BC soil ) having MDD not less than 1.85 t/m3 under floors including watering, ramming and compacting (minimum compaction 95% of MDD) in layers not exceeding 15cm depth and dressing complete. cum

42 0.0 Cement mortar 1:1 (1 cement: 1 sand) cum

43 0.0 Cement mortar 1:2 (1 cement: 2 sand). cum

44 0.9 Cement mortar 1:3 (1 cement: 3 sand). cum

45 0.9 Cement mortar 1:4 (1 cement: 4 sand) . cum

46 0.0 Cement mortar 1:5 (1 cement: 5 sand). cum

47 0.0 Cement mortar 1:6 (1 cement: 6 sand). cum

48 0.0 Cement mortar 1:2 (1 cement: 2 stone dust). cum

49 0.9 Cement mortar 1:2 (1 cement: 2 marble dust). cum

50 0.0 White cement mortar 1:2 (1 white cement: 2 marble dust). cum

51 Cement mortar 1:5 (1 cement: 5 marble dust). cum

52 White cement mortar 1:3 (1 white cement: 3 marble dust). cum

53 White cement mortar 1:5 (1 white cement: 5 marble dust). cum

54 Mortar in lime , surkhi (50% red and 50% light yellow) and marble dust 1:1.5:0.5 cum

55 0.9 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work upto plinth level :

4.1.1 With 20mm nominal size graded stone aggregate.

4.1.1.1 M-25 – Grade concrete cum

4.1.1.2 M-20 – Grade concrete cum

4.1.1.3 M-15 – Grade concrete cum

4.1.1.4 M-10Nominal (Mix-1 Cement : 3 sand : 6 graded stone aggregate ) cum

4.1.2 With 40mm nominal size graded stone aggregate.

4.1.2.1 M-15 - Grade concrete cum

4.1.2.2 M-10 Nominal (Mix -1 Cement : 3 sand : 6 graded stone aggregate) cum

4.1.2.3 M-7.5 Nominal Mix -1 Cement : 4 sand : 8 graded stone aggregate cum

4.1.3 With fly ash.

4.1.3.1 1:2:3½:9 (1 ordinary Portland cement : 2 Fly ash : 3½ sand: 9 graded stone aggregate 40 mm nominal size) Cum

4.1.3.2 1:2½:4:11 (1 ordinary Portland cement : 2½ fly ash : 4 sand : 11 graded stone aggregate 40 mm nominal size) Note: No fly ash is to be added to Portland Pozzolona cement in any case which itself contains fly ash. Cum

56 0.0 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets etc. upto floor two level, excluding the cost of centering, shuttering and finishing :

4.2.1 With 20mm nominal size graded stone aggregate

4.2.1.1 M-25 – Grade concrete Cum

4.2.1.2 M 20 – Grade concrete Cum

4.2.1.3 M 15 – Grade concrete Cum

4.2.1.4 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate Cum

4.2.2 With 40mm nominal size graded stone aggregate

4.2.2.1 M-15 - Grade concrete cum

4.2.2.2 M-10 Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate cum

57 0.9 Centering and shuttering including strutting, propping etc. and removal of form work for :

4.3.1 Upto plinth: Foundations, footings, bases for columns, plinth beams, curtain walls, columns below plinth. Sqm

4.3.2 above plinth: Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, and string courses fillets etc. sqm

4.3.3 Above plinth: Columns, pillars, posts and struts. Sqm

58 0.0 Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing .

4.4.1 M-15 (With 20mm nominal size graded stone aggregate) cum

4.4.2 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate cum

59 0.0 Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement morta1:3 (1 cement : 3 sand) on exposed surfaces complete.(With 20mm nominal size graded stone aggregate) cum

60 0.9 Providing and fixing upto floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps, stair cases, etc. including cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 Cement : 3 sand) on exposed surfaces complete.

4.6.1 M-25 (With 20mm nominal size graded stone aggregate) cum

4.6.2 M-20 (With 20mm nominal size graded stone aggregate) cum

4.6.3 M-15 (With 20mm nominal size graded stone aggregate) cum

4.6.4 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. cum

61 0.0 Providing and fixing upto floor two level precast cement concrete solid block including hoisting and setting in position with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete :

4.7.1 M-15 (With 20mm nominal size graded stone aggregate) cum 7057. 00

4.7.2 M-10 (M 10) (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement : 3 sand : 6 graded stone aggregate cum

62 0.9 Providing and Fixing upto floor two level pre cast concrete hollow block including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing smooth with 6mm thick cement plaster 1:3 (1 cement : 3 sand) on exposed surfaces complete.

4.8.1 M-15 (With 20mm nominal size graded stone aggregate) cum

4.8.2 M-10 (With 20mm nominal size graded stone aggregate) Nominal Mix -1 Cement: 3 sand: 6 graded stone aggregate. cum

63 0.0 Add extra for item no. 4.6, 4.7 and 4.8 above floor two level for every additional floor or part there of cum

64 Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 12.5mm nominal size). Sqm

65 Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size). sqm

66 Extra for providing and mixing water proofing material as per IS standard in cement concrete work quantity as prescribed by the manufacturer. Per bag of 50 kg of cement

67 Applying a coat of residual petroleum bitumen of penetration 80/100 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. Sqm

68 Extra for concrete work in superstructure above floor two level for each floors or part thereof cum

69 Extra for laying concrete in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete. Note for item No. 4.15:- The quantity will be calculated by multiplying. The depth of centre of gravity shall be reckoned correct to 0.1m. 0.05m or more shall be taken as 0.1m and less than 0.05m ignored. cum per meter depth

70 Extra for laying concrete in or under foul positions. cum

71 Making plinth protection 50mm thick of cement concrete grade M10 over 75mm bed of dry metal ballast 40mm nominal size well rammed and consolidated and filled with sand including finishing the top smooth (with 20mm nominal size graded stone aggregate.) sqm

72 Extra for addition of synthetic polyester triangular fiber of length 12 mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement concrete/RCC/Flooring/ Water retaining structures by using 125 gms of synthetic polyester triangular fibre for 50 kgs cement used as per directions of Engineer-in- Charge. per bag of 50 kg of cement

73 Precasting and placing in position 125 mm dia Bollards 600 mm high of required shape including providing M.S. Pipe welded at bottom and embedded 150mm in cement concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size) including necessary excavation of size 250x250x450mm deep for the same in bitumen/concrete pavement at specified spacing. each

74 Providing and fixing up to floor two level precast cement concrete string or lacing courses, copings, bed plates, anchor blocks, and setting in position with cement mortar 1:3 (1 Cement : 3 coarse sand), cost of required Centering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) cum

75 Providing and fixing up to floor two level precast cement concrete solid block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete . 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) cum

76 Providing and fixing up to floor two level precast cement concrete hollow block, including hoisting and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), cost of required centering, shuttering complete. 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) : 3 graded stone aggregate 20mm nominal size) cum

77 Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. Note : (1) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacemen to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC.

78 Providing and laying in position ready mixed plain cement concrete, using fly ash and cement content as per approved design curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. Note : (1) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacemen to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC.

4.23.1.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) cum

4.23.1.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) cum

4.23.2 All works above plinth and upto floor two level

4.23.2.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) cum

4.23.2.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) cum

79 Providing and laying in position ready mixed plain cement concrete, with cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in- charge.

4.24.1 All works up to plinth level:

4.24.1.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) cum

4.24.1.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) cum

4.24.2 All works above plinth and upto floor two level

4.24.2.1 M-20 grade plain cement concrete (cement content considered @ 280 kg/cum) cum

4.24.2.2 M-15 grade plain cement concrete (cement content considered @ 240 kg/cum) cum

80 Plum Cement concrete 1:2:4 with 75% graded metal of maximum size 40 mm and 25% plum of 150mm size. cum

81 Providing and laying cement concrete in Sunken floors of WC, Toilet, Wash Area, etc with 1:5:10 (1 cement : 5 coarse sand (zone-3) : 10 graded stone aggregate 40 mm nominal size) excluding the cost of centering and shuttering cum

82 0.9 Providing and laying in position specified grade of reinforced cement concrete (with 20mm nominal size graded stone aggregate)

excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :

5.1.1 M-20 Grade Concrete cum

5.1.2 M-15 Grade Concrete cum

83 0.0 Reinforced cement concrete with 20mm graded nominal size stone aggregate) in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, posts and struts etc. above plinth level and upto floor two level excluding cost of centering, shuttering, finishing and reinforcement:

5.2.1 M-20 Grade Concrete cum

84 0.9 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in beams, suspended floors, roofs having slope of any degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in concrete grade.

5.3.1 M-20 Grade Concrete cum

85 0.0 Providing and laying upto floor two level reinforced cement concrete (with20 mm nominal size graded stone aggregate) in kerbs, steps and the like excluding the cost of centering, shuttering, finishing and reinforcement with Concrete grade.

5.4.1 M-20 Grade Concrete cum

86 0.0 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in arches, archribs, domes, vaults, shells, folded plate above plinth level and upto floor two level excluding the cost of centering, shuttering, finishing and reinforcement in Concrete grade.

5.5.1 M-20 Grade Concrete

87 0.9 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in chimneys, shafts, upto floor two level excluding the cost of centring, shuttering, finishing and reinforcement with

5.6.1 M-20 Grade Concrete cum

88 0.0 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in well-steining excluding the cost of centering, shuttering, finishing and reinforcement with

5.7.1 M-20 Grade Concrete cum

89 0.9 Reinforced cement concrete work (with 20 mm nominal size graded stone aggregate) in vertical and horizontal fins individually or forming box louvers, facias and eaves boards up to floor two level excluding the cost of centering, shuttering, finishing and reinforcement in M 20 –Grade Concrete cum

90 0.0 Centering and shuttering in cluding strutting, propping etc. and removal of form for:

5.9.1 Foundations, footings, bases of columns, etc. for concrete upto plinth level sqm

5.9.2 Walls (any thickness) in cluding attached pilasters butter esses, plinth beams and string courses etc.

5.9.2.1 Uptoplinthlevel. sqm

5.9.2.2 Above plinth upto 3.6 m height from plinth level sqm

5.9.2.3 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof. sqm

5.9.3 Suspended floors, roofs, landings, balconies and access platform. sqm

5.9.4 Shelves(Cast in situ) sqm

5.9.5 Lintels, beams, girders, bressumers and cantilevers sqm

5.9.6 Columns, P i l l a r s , Piers, Abutments, Posts and Struts. sqm

5.9.7 Stairs, (excluding landings) except spiral- Staircases. sqm

5.9.8 Spiral staircases (including landing). sqm

5.9.9 Arches, domes,vaults upto 6m span sqm

9\.9\.10;@ Extra for arches, domes, vaults exceeding 6 m span sqm

9\.9\.11;@ Chimneys and shafts sqm

9\.9\.12;@ Coffer/waffle slab of any size or shape as shown in the drawing. sqm

9\.9\.13;@ Well steining sqm

9\.9\.14;@ Vertical and horizontal fins individually or forming Box louvers band, facias and eaves boards. sqm

9\.9\.15;@ Extra for shuttering in circular work or any other geometrical shape (20% of respective centering and shuttering items). sqm

9\.9\.16;@ Small lintels not exceeding 1.5m clear span, mouldingas incornices, window, sills, courses, bands, copings, bed plates, anchor blocks and the like. sqm

9\.9\.17;@ Cornices and mouldings sqm

9\.9\.18;@ Small surfaces such as cantilever ends, brackets and ends of steps, caps and bases to pilasters and columns and the like. sqm

9\.9\.19;@ Weather shade, Chajjas, corbels etc., including Edges. sqm

9\.9\.20;@ Suspended floors, roofs, landings, balconies and Access platform. With water proof ply 12 mm thick. (item to be executed with prior permission of S.E. in case of B & R works and from Additional Project Director in case of PIU works) sqm

9\.9\.21;@ Lintels, beams, columns, girders, bressumers and cantilevers with waterproof ply 12 mm thick (item to be executed with prior permission of S.E. in case of B&R works and from Additional Project Director in case of PIU works) sqm

91 Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and decentering at all levels, over a height of 3.6 m, for every additional height of 1 metre or part thereof (Plan area to be measured)

5.10.1 Suspended floors, roofs, landing, beams and balconies (Plan area to be measured). sqm

92 Providing, hoisting and fixing up to floor two level precast reinforced cement concrete in lintels, manhole cover, shelves and like including setting in cement mortar 1:3 (1 cement : 3 sand), cost of required centering, shuttering and finishing with neat cement punning on exposed surfaces but excluding the cost of reinforcement with M 15 –Grade Concrete. cum

93 Providing precast cement concrete Jali 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia mild steel wire including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 sand) etc. complete excluding plastering of the jambs, sills and soffits.

5.12.1 50 mm thick sqm

5.12.2 40 mm thick sqm

5.12.3 25 mm thick sqm

94 Encasing rolled steel sections, in beams and columns, with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) including centering and shuttering complete but excluding cost of reinforcement. cum

95 Encasing rolled steel section in grillages with cement concrete M 15 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including centering and shuttering but excluding cost of expanded metal and hangers. cum

96 Extra for providing and fixing expanded metal mesh of size 20x60mm and strands 3.25mm wide 1.6mm thick weighing 3.64 kg per sqm for encasing of rolled steel sections in beams, columns and grillages excluding cost of hangers. sqm

97 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding including cost of binding wire all wastages and overlaps, couplers (overlaps shall be provided as per requirement of IS 13920 for ductile detaling IS 456 RCC Design & SP 34 Reinforcement detailing ) etc. complete . (Note:-1. Spacer bars (chairs) shall be paid separately as shown in the drawing and as per direction of engineer in charge. 2. No extra payment shall be done for overlaps and/or couplers.3.Couplers shall be conforming to IS code on “Reinforcement Couplers for Mechanical Splices of Bars for Concrete Reinforcement - Specification”)

5.16.1 Mild steel and Medium Tensile steel bars. kg

5.16.2 Hard drawn steel wire kg

5.16.3 Cold twisted bars (CTD) kg

5.16.4 Hot rolled deformed bars kg

5.16.5 Hard drawn steel wire fabric kg

5.16.6 Thermo-Mechanically Treated bars. (TMT/TMX) FE 500 D or more conforming to IS 1786 kg

98 Add extra for providing reinforcement above Floor two level for every additional floor or part thereof. kg

99 Providing and fixing in position copper plate as per design for expansion joints. Kg

100 Providing and filling in position, blown bitumen in expansion joints. per cum

101 Providing and filling in position bitumen mix filler of Proportion 80 kg. Of hot bitumen, 1 kg. Of cement and 0.25 cubic metre of sand for expansion joints. per cum

102 Providing and filling gap in expansion joint between RCC/ Stone/Ceramic tiles/Granite/ Marble by providing silicon sealant over backer rod of approved quality weather sealant as per drawing and direction of engineer in charge up to 25mm width & 12 mm depth. Per cm depth per cm width one m long.

103 Providing and fixing in position bitumen impregnated fibre board conforming to IS: 1838 including cost of primer, sealing compound in expansion joints.

5. 22.1 12 mm thick sqm

5. 22.2 25 mm thick sqm

5. 22.3 50 mm thick sqm

104 Providing and fixing sheet covering over expansion joints with iron screws as per design.

5. 23.1 Non-asbestos fibre cement board 6 mm thick as per IS: 14862.

5. 23.1.1 150mm wide. RM

5. 23.1.2 200mm wide. RM

5. 23.1.3 250mm wide. RM

5. 23.2 Aluminium fluted strips 3.15mm thick.

5. 23.2.1 150 mm wide. RM

5. 23.2.2 200 mm wide. RM

5. 23.2.3 250 mm wide. RM

5. 23.3 Stainless steel Grade 304 plate-1.0 mm thick

5. 23.3.1 150 mm wide. RM

5. 23.3.2 200 mm wide. RM

5. 23.3.3 250 mm wide. RM

105 Providing for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. RM

106 Extra for laying reinforced cement concrete in or under water and/ or liquid mud including cost of pumping or bailing out water and removing slush etc., complete. Note- For Item No. 5.25:-The quantity will be calculated by multiplying the depth measured from the subsoil water level up to the centre of gravity The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. No extra payment shall be made for placing reinforcement or centering & shuttering under sub – soil water condition cum

107 Extra for laying reinforced cement concrete in or under foul positions. cum

108 Providing and laying in position machine batched, machine mixed cement concrete (BMC) of M-20 grade for reinforced cement concrete work using cement content as per approved mix design concretewithout impairing strength and durability as per direction ofEngineer-in charge and pumping of concrete to site of laying and

finishing but excluding the cost of centering, shuttering, and reinforcement. (Note: - Minimum cement content is 320 kg/cum) and no extra payment for extra cement used as per mix design.

5.27.1 All works upto plinth level. cum

5.27.2 All works above plinth level and upto floor five level. cum

5.27.3 Add extra for each floor for all works above floor five level. cum

109 Extra for providing richer mixes of BMC design mix as per item no 5.27 upto plinth level and at all floor levels. (No extra payment for using extra cement as per requirement of mix design.)

5. 28.1 Providing M-25 grade concrete instead of M- 20 grade.(Note : minimum cement content is @ 330 kg/cum) cum

5. 28.2 Providing M-30 grade concrete instead of M- 20 grade.(Note: : minimum cement content is @ 340 kg/cum) cum

5. 28.3 Providing M-35 grade concrete instead of M- 20grade.(Note: minimum cement content is @ 350 kg/cum) cum

110 Providing and placing in position precast reinforced cement concrete waffle units square or rectangular as per design and shape for floors and roofs in M-20 –Grade Concrete (with graded stone aggregate 10mm nominal size. including provision of steel hooks for lifting and form work, handling, hoisting, centering and erection complete for all floor levels but excluding the cost of reinforcement. cum

111 Providing and laying in position ready mixed concrete (RMC) of M-20 grade for reinforced cement concrete work, using cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Note: Minimum cement content is @ 320 kg/cum. (No extra payment for using extra cement as per requirement of mix design.)

5.30.1 All works upto plinth level. cum

5.30.2 All works above plinth level and upto floor V level. cum

5.30.3 Extra for each additional floor for all works above floor five level cum

112 Extra for R.C.C. work above floor two level for each floors or part thereof. (except items 5.27 and 5.30) cum 1% of respective item

113 Supplying and applying pre tested and approved water based concrete curing compound to concrete/ masonry surface, all as per manufacturer’s specification and direction of Engineer-in-charge.

5.32.1 Non pigmented wet curing compound sqm

5.32.2 Pigmented wet curing compound. sqm

114 Providing and fixing in position factory made precast RCC M-40 doors, windows and ventilator frames having excellent smooth finish, as per IS: 6523 with 6mm dia main reinforcement each polymer block having at least four holes for passing one or adjacent rebates to hold fast grill or steel bar, ventilator frame provided with grooves for louvers at an angel of 45 degree at spacing to block direct vision etc. complete, as per the direction of Engineer-in-charge. The cost of hold fast and cement concrete block of 1:3: 6 (1 Cement: 3 sand: 6 Graded stone aggregate 20mm nominal size) mix is also included in the item.

5. 33.1. Frame 125 mmx 60 mm (double rebate) RM

5. 33.2. Frame 100mmx 60 mm (Single rebate) RM

5. 33.3 Frame 85mmx 60 mm (Single rebate) RM

115 Smooth finishing of the exposed surface of RCC work with 6mm thick cement mortar 1:3 (1 cement: 3 sand). sqm

116 Providing and fixing in position pre moulded compressible filler board made from polymer base in black color approved make conforming to the specifications having minimum density of 95 kg / cum, non- staining, with less than 1 percent water

absorption and compression recovery of 93 percent minimum including cost of double sided adhesive tape, sealant etc. in expansion joints.

5. 35.1 12 mm thick sqm

5. 35.2 25 mm thick. sqm

5. 35.3 50 mm thick. sqm

117 Providing and sealing the retaining wall expansion Joints with anodized aluminum extruded section of 135 mm × 3.1 mm confirm to alloy of 6063 T5/T6including fixing of an imported EPDM moisture Barrier conform to (American Society for Testing and Materials) 2240 & ASTM - G53 & 84 fixing with Epoxy adhesive confirm to ASTM C-881 complete in all respect as per manufacturer Drawing and specifications. With 5 year guarantee. metre

118 Providing and fixing sheet covering over expansion joints with iron screws as per design. Non- asbestos cement bonded particle board 6 mm thick as IS: 14276

5.37.1 150mm wide meter

5.37.2 200mm wide meter

5.37.3 250mm wide meter

119 Providing & laying in position Prestressing steel strands (low relaxation) on hollow core bed by using mechanical pulling arrangement like Rabbit/ Bed master including all accessories for Stressing &destressing operations as per approved make conforming to IS1343 & grade FY-1860 etc, complete as per drawings and direction of Engineer -in- charge. Kg

120 Providing and fixing of expansion joint system related with floor location as per drawings and direction of Engineer-In- Charge. The joints system will be of extruded aluminum base members, self aligning / self centering arrangement and support plates etc. Provision of Moisture Barrier Membrane in the Joint System to have watertight joint is mandatory requirement all as per the manufactures design and as approved by Engineer - inCharge. (Material shall confirm to ASTM 6063).

5. 39.1 Floor Joint of 100 mm gap metre

5. 39.2 Floor Joint of 150 mm gap metre

5. 39.3 Floor Joint of 200 mm gap metre

121 Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of extruded aluminum base members, self aligning / centering amongst the components of the Joint System. The Joint System shall utilize light weight aluminum profiles exhibiting minimal exposed aluminum surfaces mechanically snap locking the multicellular to facilitate movement. (Material shall confirm to ASTM 6063).

5. 40.1 Wall Joint of 100 mm gap metre

5. 40.2 Wall Joint of 150 mm gap metre

5. 40.3 Wall Joint of 200 mm gap metre

122 Providing and fixing of expansion joint system of approved make and manufactures for various roof locations as per approved drawings and direction of Engineer-In-Charge.The joints shall be of extruded aluminum base members with self aligning and self centeringarragement support plates asper ASTM B221-02. The Joint System shall resists damage or deterioration from the impact of falling ice, exposure to UV, airborne contaminants and occasional foot traffic from maintenance personnel. Provision of Moisture Barrier Membrane in the Joint System to have water tight joint is mandatory requirement. (Material shall confirm to ASTM 6063.)

5.41.1 Roof Joint for 100 mm gap metre

5.41.2 Roof Joint for 150 mm gap metre

5.41.3 Roof Joint for 200 mm gap metre

123 Providing and fixing Scaffolding net of required width made of high density Polyethylen UV stabilized knitted on warp knitting machines having density 100gm/sqm and shading coefficient minimum 75% around the construction site/ for vertical extension as per requirement including fastening/tying with building/scaffolding pipes or with any other fixtures etc. complete as per direction of Engineer-in-Charge. (One time payment shall be made for providing Scaffolding net from start of work till completion of work including shifting if any. The Scaffolding net shall be the property of the contractor on completion of the work) sqm

124 Extra rate in internal plastering work for every additional floors above ground floor (due to lifting of material, ,scaffolding and labour etc. complete) Note:- Applicable to item No. 13.1 to item No. 13.10 sqm

125 0.9 Brick work with well burnt chimney bricks in bulls pattern trench kiln manufactured by ghol process, crushing strength not less than 40kg /cm2 and water absorption not more than 15% in foundation and plinth i/c curing etc. complete.

6.1.1 Cement mortar 1:4 (1 cement : 4 sand) cum

6.1.2 Cement mortar 1:6 (1 cement : 6 sand) cum

126 0.0 Brick work with well burnt chimney bricks in bulls patent trench kiln manufactured by ghol process ,crushing strength not less than 40kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level i/c curing etc. complete.ement mortar 1:6 (1 cement : 6 sand)

6.2.1 Cement mortar 1:4 (1 cement : 4 sand) cum

6.2.2 Cement mortar 1:6 (1 cement : 6 sand) cum

127 0.9 Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not les than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete.

6.3.1 Cement mortar 1:4 (1 cement : 4 sand) cum

6.3.2 Cement Mortar 1:6 (1 cement:6 sand). cum

128 0.0 Brick work with well burnt chimney bricks in bulls pattern trench kiln, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete

6.4.1 Cement mortar 1:4 (1 cement : 4 sand) cum

6.4.2 Cement Mortar 1:6 (1 cement:6 sand). cum

129 0.0 Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg /cm2 and water absorption not more than 20% in foundation and plinth i/c curing etc complete.

6.5.1 Cement mortar 1:4 (1 cement : 4 sand) cum

6.5.2 Cement Mortar 1:6 (1 cement: 6 sand). cum

130 0.9 Brick work with well brunt open bhatta, bricks, crushing strength not less than 25kg/cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level i/c curing etc complete

6.6.1 Cement mortar 1:4 (1 cement : 4 sand) cum

6.6.2 Cement Mortar 1:6 (1 cement : 6 sand) cum

131 0.0 Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002, in super structure above plinth level up to floor two level in :

6.7.1 Having 100 kg / cm2 average compressive strength.

6.7.1.1 Cement mortar 1:4 (1 cement : 4 sand) cum

6.7.1.2 Cement mortar 1:6 (1 cement : 6 sand) cum

6.7.2 Having 75 kg / cm2 average compressive strength.

6.7.2.1 Cement mortar 1:4 (1 cement : 4 sand) cum

6.7.2.2 Cement mortar 1:6 (1 cement : 6 sand) cum

6.7.3 Having 50 kg / cm2 average compressive strength.

6.7.3.1 Cement mortar 1:4 (1 cement : 4 sand) cum

6.7.3.2 Cement mortar 1:6 (1 cement : 6 sand) cum

132 0.9 Brick work with calcium silicate bricks machine moulded conforming to IS:4139, having 100 kg/cm2 average compressive strength in super structure above plinth level upto floor II level in :

6.8.1 Cement mortar 1:4 (1 cement : 4 sand) cum

6.8.2 Cement mortar 1:6 (1 cement : 6 sand) cum

133 0.0 Brick work with extruded burnt fly ash clay sewer bricks (Conforming to IS: 4885) in foundation and plinth : Cement Mortar 1:4 ( 1 cement : 4 sand) cum

134 Brick work with extruded burnt fly ash clay sewer bricks (conforming to IS: 4885) in archesin foundation and plinth including centering and shuttering complete in cement mortar 1:3 (1 cement: 3 sand). cum

135 Extra for brick work in superstructure above floor two levels for each additional floor or part thereof respective item . cum

136 Providing half brick masonry with well burnt chimney bricks in bull patent trench kiln manufactured by ghol process crushing strength not less than 40 kg /cm2 and water absorption not more than 15% in superstructure above plinth level and up to floor two level.

6.12.1 Cement mortar 1:3 (1 cement : 3 sand) sqm

6.12.2 Cement mortar 1:4 (1 cement : 4 sand) sqm

137 Providing half brick masonry with well burnt chimney bricks in bull pattern trench kiln crushing strength not less than 25kg/cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level.

6.13.1 Cement mortar 1:3 (1 cement : 3 sand) sqm

6.13.2 Cement mortar 1:4 (1 cement : 4 sand) sqm

138 Providing half brick masonry with well burnt open bhatta bricks crushing strength not less than 25 kg /cm2 and water absorption not more than 20% in superstructure above plinth level and up to floor two level

6.14.1 Cement mortar 1:3 (1 cement : 3 sand) sqm

6.14.2 Cement mortar 1:4 (1 cement : 4 sand) sqm

139 Half brick masonry with fly ash lime Gypsum bricks(FALG bricks) conforming to IS:12894, in super structure above plinth and upto floor two level.

6.15.1 Having 100 kg/cm2 average compressive strength.

6.15.1.1 Cement mortar 1 : 3 (1 cement : 3 sand) sqm

6.15.1.2 Cement mortar 1 : 4 (1 cement : 4 sand) sqm

6.15.2 Having 75 kg/cm2 average compressive strength.

6.15.2.1 Cement mortar 1 : 3 (1 cement : 3 sand) sqm

6.15.2.2 Cement mortar 1 : 4 (1 cement : 4 sand) sqm

6.15.3 Having 50 kg/cm2 average compressive strength.

6.15.3.1 Cement mortar 1 : 3 (1 cement : 3 sand) sqm

6.15.3.2 Cement mortar 1 : 4 (1 cement : 4 sand) sqm

140 Extra for half brick masonry in superstructure, above floor two level for every floor or part thereof respective item. sqm

141 Extra for providing and placing in position 2 Nos. 8mm dia. M.S. bars at every third course of in half brick masonry. sqm

142 Honey-comb brick work 10 cm thick with well burnt chimney bricks manufactured by ghol process crushing strength not less than 40kg /sqcm and water absorption not more than 15% in cement mortar 1:4 (1 cement : 4 sand). sqm

143 Extra for forming cavity 5cm to 7.5cm wide in cavity walls with necessary weep and vent holes including use of cores and cost of providing and fixing bitumastic coated M .S. Ties 300mm long of 25x3mm section at not less than 3 ties per sqm as per approved design sqm

144 Brick work in plain arches in superstructure including centering and shuttering complete with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 cement : 3 sand). cum

145 Brick work in gauged arches in superstructure in cement mortar 1:3 (1 cement : 3 sand) including centering and shuttering complete, with chimney bricks having crushing strength not less than 40kg /cm2 and water absorption not more than 15% cum

146 Providing half brick masonry with kiln burnt clay bricks of 40kg /cm2 and water absorption not more than 15% in cement mortar 1:3 (1 Cement : 3 sand) in superstructure for closing cavity 5 to 7.5 cm wide in cavity wall complete with 10 cm wide bitumen felt type 3 grade 1. metre

147 Extra for laying brick work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete. NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of brick work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. cum per metre depth

148 Extra for laying brick work in or under foul position. cum

149 Providing and laying cellular concrete blocks masonry having density ranging from 800kg/m3 in super structure above plinth level up to floor two level in cement mortar 1:4 (1 cement: 4 sand) The nominal dimensions of the concrete blocks shall be as follows in additional block shall be of half lengths of 200, 250 or 300 mm to correspond to the full lengths. The size of the blocks specified other than those specified may also be used. cum

150 Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry, using AAC blocks (Size length 300, 400, 500, 600 mm Height 200, 250, 300 mm Width 100, 150, 200, 250 mm) conforming to IS 2185 PART 3, having compressive strength not less than 4 MPa (Grade II) in super structure, blocks jointed with approved block laying polymer modified adhesive mortar as per ASTM international standard including raking out joints. Vertical bands shall be placed along jams (vertical member of chowkhats) and extend upto lintel levels to arrest cracking at corner openings. RCC bands shall be measured with AAC block masonry. Rates include all materials including steel bars, wastages, scaffolding and all labour etc. complete.

6.26.1 AAC Masonry in polymer modified mortar cum

151 Extra for AAC masonry work in superstructure above floor two level for each additional floor or part thereof cum

152 Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced roof slabs, lintels and chhajjas as per IS: 6073 -2006 grade D specifications (dry density, without steel, 550 kg/m3 to 650 kg/m3 and minimum compressive strength 3.5 N/mm2) reinforcement steel provided inside AAC slab, lintel and chhajja shall be ascertained on the basis of manufacturer’s certificate and also by random destructive testing done by engineer-in-charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Deflection & ultimate load test for AAC reinforced roof slab and lintel shall be as per annex. B of IS: 6073 -2006 and criteria for conformity and sampling shall be as per clause-13 of IS: 6073 -2006. cum

153 Precast autoclaved aerated concrete (AAC) reinforced wall panels:- Providing hoisting & fixing precast Autoclaved Aerated Concrete (AAC) reinforced wall panels as per IS:6072 -1972 grade D (dry density, without steel, 550 kg/m3 to 650 kg/m3 and inside AAC panels.Quantity of reinforcement steel in AAC panels shall be cum

ascertained on the basis of certificate of the manufacturer and also by random destructive testing by engineer-in- charge or his representative for which cost of samples and testing charges shall be borne by the contractor. Cost of reinforcement inside AAC panels shall be paid separately.

154 Add extra for AAC wall panels, roof slabs, lintels and chhajjas above floor two level for each additional floor as per item no 6.29 and 6.30. cum

155 Providing and laying Autoclaved Aerated Concrete (AAC) blocks masonry Jali work, using AAC blocks (Size length 300, 400, 500, 600 mm Height 200, 250, 300 mm Width 100, 150, 200, 250 mm) conforming to IS 2185 PART 3, having compressive strength not less than 4 MPa (Grade II) in super structure, blocks jointed with approved block laying polymer modified adhesive mortar as per ASTM 1660-09,applied in uniform thickness of 2 to 3 mm in horizontal and verticals joints using special trowel, polymer modified mortar having minimum compressive strength and minimum splitting tensile strength of not less than 5MPa and 0.34 MPa respectively as per ASTM international standard including raking out joints. The surface of masonry units (AAC- Block) should be slightly moist prior to cum

156 Brick work with common burnt clay selected F.P.S. (non modular) bricks of class designation 7.5 in exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement : 6 coarse sand)

6.32.1 From ground level upto plinth level cum

6.32.1 Above plinth level upto floor II level cum

157 6.33 Brick work with modular bricks of class designation 7.5 in exposedbrick work including making horizontal and vertical grooves 10mm wide 12mm deep complete from ground level up to plinth level in cement mortar 1:6 (1 cement : 6 coarse sand)

6.33.1 From ground level upto plinth level cum

6.33.2 Above plinth level upto floor II level cum

158 Providing and laying Gypsum panel partitions 100 mm thick with water proof Gypsum panels of size 666x500x100 mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturer’s specifications in superstructure above plinth level up to floor two level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2 sqm

159 Extra for Gypsum panel Partitions in superstructure above floor two level for every four floors or part thereof. sqm

160 Providing and laying Red Brick work of size 200X100x50 mm on exposed wall in cement morter 1:3 including racking and jointing rubbing and filler polishing 2 coat as per direction by Engineer in Charge. sqm

161 Brick work with fly ash bricks up to plinth Brick work with fly ash lime bricks (FALG Bricks) conforming to IS:12894-2002,

6.37.1 Having100 kg / cm2 average compressive strength.

6.37.1.1 Cement mortar 1:4 (1 cement : 4 sand) cum

6.37.1.2 Cement mortar 1:6 (1 cement : 6 sand) cum

6.37.2 Having75 kg / cm2 average compressive strength.

6.37.2.1 Cement mortar 1:4 (1 cement : 4sand) cum

6.37.2.2 Cement mortar 1:6 (1 cement : 6sand) cum 4797.00 cum

6.37.3 Having50 kg / cm2 averagecompressive strength.

6.37.3.1 Cement mortar 1:4 (1 cement : 4sand) cum

6.37.3.2 Cement mortar 1:6 (1 cement : 6sand) cum

162 0.9 Random rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 cement :6 sand : 12 graded stone aggregate 20mm nominal size) at plinth level with :

7.1.1 Cement mortar 1:6 (1 cement : 6 sand) cum

163 0.0 Random rubble masonry with hard stone in superstructure above plinth level and upto floor two level, including leveling up with cement concrete 1:6:12 (1 cement : 6 sand : 12 graded stone aggregate 20mm nominal size) at window sills, ceiling level and the like.

7.2.1 Cement mortar 1:6 (1cement: 6 sand). cum

164 0.9 Extra for random rubble masonry with hard stone in superstructure above floor two level for every floors or part thereof cum 0.0%

165 0.0 Extra for random rubble masonry with hard stone in :

7.4.1 Square or rectangular pillars cum

7.4.2 Circular pillars. cum

166 0.0 Extra for random rubble masonry with hard stone curved on plan for a mean radius not exceeding 6 m. cum

167 0.9 Coursed rubble masonry(1st or 2nd sort)with hard stone in foundation and plinth.

7.6.1 Cement mortar 1:6 (1 cement : 6 sand) cum

7.6.2 Cement mortar 1:6 (1 cement : 6 sand) cum

168 0.0 Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto floor two level.

7.7.1 Masonry work (first sort) in cement mortar 1:6 (1 cement : 6 sand) cum

7.7.2 Masonry work (second sort) , in cement mortar 1:6 (1 cement : 6 sand) cum

169 0.9 Extra for coursed rubble masonry with hard stone (first or second sort) in superstructure above floor two level for every floors or part thereof cum 0.0%

170 0.0 Extra for coursed rubble masonry with hard stone (first or second sort) in :

7.9.1 Square or rectangular pillars cum

7.9.2 Circular pillars. cum

7.9.3 Extra for coursed rubble masonry with hard stone (first or second sort) curved on plan for a mean radius not exceeding 6 m. cum

171 Stone work in plain ashlar masonry in super structure upto floor two level in cement mortar 1:6 (1 cement : 6 sand) including pointing with cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the sand stone shade :

7.10.1 One face dressed.

7.10.1.1 Red sand stone cum

7.10.1.2 White sand stone cum

7.10.2 Both face dressed.

7.10.2.1 Red sand stone. cum

7.10.2.2 White sand stone cum

172 Stone work plain ashlar masonry in arches in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade.

7.11.1 One face dressed.

7.11.1.1 Red sand stone cum

7.11.1.2 White sand stone cum

7.11.2 Both face dressed.

7.11.2.1 Red sand stone. cum

7.11.2.2 White sand stone cum

173 Stone work plain ashlar masonry in domes, in super structure upto floor two level in cement mortar 1:3 (1 cement: 3 sand) including centering, shuttering and pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade.

7.12.1 One face dressed

7.12.1.1 Red sand stone cum

7.12.1.2 White sand stone cum

7.12.2 Both face dressed.

7.12.2.1 Red sand stone. cum

7.12.2.2 White sand stone. cum

174 Stone work ashlar masonry punched (ordinary) in superstructure above plinth level and upto floor two level in cement mortar 1:6 (1 white cement: 6 sand) including pointing with cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the sand stone shade.

7.13.1 Red sand stone one face punched. cum

7.13.2 Red sand stone both face punched cum

7.13.3 White sand stone one face punched. cum

7.13.4 White sand stone double face punched cum

175 Extra for stone work, plain ashlar or ashlar punched above floor two level for every floor or part thereof. cum

176 Extra for plain ashlar or ashlar punched in :

7.15.1 Square or rectangular pillars cum

177 Extra for stone work; plain ashlar or ashlar punched in curved on plan with a mean radius not exceeding 6 m. cum

178 Extra for additional cost of centering for arches exceeding 6m span including all strutting, bolting, wedging etc. And removal (area of soffit to be measured). sqm

179 Stone work sunk or moulded or sunk and moulded upto floor Two level in cement mortar 1:6(1cement : 6 sand) including pointing with white cement mortar 1:2 (1 white : 2 marble dust) with an admixture of pigment matching the stone shade :

7.18.1 Red sand stone cum

7.18.2 White sand stone cum

180 Extra for stone work sunk or moulded or sunk and moulded or carved in

7.19.1 Triangular or Square or rectangular pillars cum

7.19.2 Circular or polygonal pillars cum

181 Extra for stone work sunk or moulded in cornices. per metre per cm girth

182 Stone work (machine cut edges) for wall lining etc. (veneer work) up to 10 meter height backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of clamps which shall be paid for separately):

7.21.1 Red sand stone - exposed face fine dressed with rough backing.

7.21.1.1 70 mm thick. sqm

7.21.1.2 60 mm thick. sqm

7.21.1.3 50 mm thick sqm

7.21.1.4 40 mm thick. sqm

7.21.1.5 30 mm thick. sqm

7.21.2 Red sand stone- Exposed face machine cut and table rubbed with rough backing.

7.21.2.1 70 mm thick. sqm

7.21.2.2 60 mm thick. sqm

7.21.2.3 50 mm thick sqm

7.21.2.4 40 mm thick. sqm

7.21.2.5 30 mm thick. sqm

7.21.3 White sand stone - exposed face fine dressed with rough backing.

7.21.3.1 70 mm thick. sqm

7.21.3.2 60 mm thick. sqm

7.21.3.3 50 mm thick sqm

7.21.3.4 40 mm thick. sqm

7.21.3.5 30 mm thick. sqm

7.21.4 White sand stone-Exposed face machine cut and table rubbed with rough backing.

7.21.4.1 70 mm thick. sqm

7.21.4.2 60 mm thick. sqm

7.21.4.3 50 mm thick sqm

7.21.4.4 40 mm thick. sqm

7.21.4.5 30 mm thick. sqm

183 Extra for stone work (veneer work) curved on plan with a mean radius not exceeding 6 m. cum

184 Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement :2 sand) including making the necessary chases in stone and holes in walls wherever required. kg

185 Providing and fixing stone dowels of size 10x5x2.5cm cut to double wedge shape as per design in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases each

186 Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 sand) including making the necessary chases. each

187 Providing and fixing sloping chajja of stone 40 mm thick and upto 80 cm wide beyond the wall as measured along the slope in cement mortar 1:4 (1cement :4 sand) including pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment matching the stone shade:

7.26.1 Red sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. sqm

7.26.2 White sand stone: With common burnt clay bricks of 25 kg/cm2 compressive strength. sqm

188 Providing and fixing horizontal chajja of stone 40 mm thick and upto 80 cm projection in cement mortar 1:4 (1 cement : 4 sand) including pointing in white cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment matching the

7.27.1 Red sand stone sqm

7.27.2 White sand stone sqm

189 30mm red sand stone sun-shade (chisel-dressed) supported on red sand stone brackets, fixed in walls with cement mortar 1:4 (1 cement: 4 sand) including finishing complete. sqm

190 Providing and fixing red sand stone brackets 55x22.5x45cm sunk and moulded including providing and fixing with 4 Nos. gun metal cramp 25x6mm 30 cm long and dowel bars 7.5 cm long 6 mm dia as per design. each

191 Stone work, plain in copings, cornices, string courses and plinth courses, upto 75 mm thick in Cement mortar 1:6 (1 cement : 6 sand) including pointing with white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade.

7.30.1 Red sand stone cum

7.30.2 White sand stone cum

192 Providing and fixing stone jali 40mm thick throughout in cement mortar 1:3 (1cement :3 sand) including pointing in white cement mortar 1:2 (1white cement: 2stone dust) with an admixture of pigment , matching the stone shade, jali slab without any chamfers etc.

7.31.1 Red sand stone sqm

7.31.2 White sand stone sqm

193 Extra for laying stone work in or under water and/or liquid mud including cost of pumping or bailing out water and removing slush etc. complete. NOTE: - The quantity will be calculated by multiplying the depth measured from sub - soil water level up to the centre of gravity of stone work in cum executed under the sub - soil water. The depth of centre of gravity shall be reckoned correct to 0.1 m. 0.05 m or more shall be taken as 0.1 m and less than 0.05 m ignored. cum/mtr depth

194 Extra for laying stone work in or under foul position. cum

195 Wall lining butch work upto 10m height with red/ white sand stone 40 mm thick rough facing on the exposed surface with stone strips of minimum length 300 mm and required width 75mm thick strips i/c 12mm thick bed of cement mortar 1:3 (1 Cement : 3 sand) i/c ruled pointing in cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the shade of stone complete as per direction of Engineer-in- charge. sqm

196 Stone work ( machine cut edges) for wall lining upto 10 m height etc. (Veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 Cement : 3 sand) and jointed with Cement mortar 1:2 (1 cement : 2 marble dust) including rubbing and polishing complete. (To be secured to the backing by means of cramps which shall be paid for separately)

7.35.1 25mm thick Kota stone slabs exposed face dressed and rubbed. sqm

7.35.2 25mm thick Dholpur stone slabs exposed face dressed and rubbed. sqm

7.35.3 20 to 25mm thick kota stone slabs exposed slab not dressed and rubbed. sqm

7.35.4 20 to 25mm thick Dholpur stone/shivpuri stone not dressed and rubbed. sqm

197 Stone tile work with 8mm thick mirror polished and machine cut edge for wall lining upto 10 m height with special adhesive over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 sand), including pointing in white cement with an admixture of pigment to match the stone shade.

7.36.1 Granite stone of any colour and shade sqm

7.36.2 Raj Nagar plain white marble/ Udaipur green marble/ Zebra black marble sqm

198 Extra for stone work for wall lining on exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof. sqm

199 Providing and fixing dry stone cladding upto 10 metre height with 30mm thick gang saw cut stone with (machine cut edges) of uniform colour and/ or with the help of cramps, pins etc. And sealing the joints with approved weather sealant as per Architectural drawing and direction of Engineer-in-charge. (The steel frame work, stainless steel cramps and pins. shall be paid for separately.)

7.38.1 Red sand stone. sqm

7.38.2 White sand stone sqm

200 Providing and fixing structural steel frame (for dry stone cladding with 30 mm thick gang saw cut with machine cut edges sand stone) on walls at all heights using M.S. square/rectangular tube in the required pattern as per architectural drawing including including drilling necessary steel work will be given a priming coat of Zinc primer as approved by Engineer-in-charge and painted with two or more coats of epoxy paint (Shop drawings shall be submitted by the contractor to the Engineer-in-charge for approval before execution).The frame work shall be fixed in true horizontal and vertical lines/ planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel clamps shall be paid for separately and nothing extra shall be paid.) kg

201 Providing and fixing adjustable stainless steel clamps of approved quality and of required shape and size adjustable with stainless steel nuts bolts and washer (total weight not less than 260 gms) for dry stone cladding fixed on frame each

202 0.9 Providing and supplying aluminium extruded tubular and other aluminium sections frame work as per the architectural drawings and approved shop drawings, the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coated of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. (The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). kg

203 0.9 Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of aluminium structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels.. The item includes the cost of getting all the structural and functional design including shop drawings checked by a structural designer, dully approved by Engineer-in-charge. The item also includes the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working structural glazing as specified, cleaning and protection till the handing over of the building for occupation. In the end, the Contractor shall provide a water tight structural glazing having all the performance characteristics etc. all complete as required, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineerin- Charge. sqm

204 0.0 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass sqm

6mm thick, of approved colour as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineer-in-Charge. The IGUs shall be assembled in the factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.8.2) For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm.

205 0.0 Extra for openable side / top hung vision glass panels (IGUs) including providing and supplying at site all accessories and hardwares for the openable panels as specified and of the approved make such as heavy duty stainless steel friction hinges, min 4 -point cremone locking sets with stainless steel plates, handles, buffers etc. including necessary stainless steel screws/ fasteners, nuts, bolts, washers etc. all complete as per the Architectural drawings, as per the approved shop drawings, as specified and as directed by the Engineerin- Charge. sqm

206 0.0 Providing, fabricating and supplying shadow box of required size and shape, for fixing in the spandrel portion of the structural glazing, in linear as well as curvilinear portions of the building by providing semi - rigid, inorganic, non- combustible fibre glass wool insulation 50 mm thick having density 48 kg/m3, conforming to IS: 8183 and BS: 3958 Part 5.The insulation layer shall have facing (factory bonded on surface # 1 of the fibre glass insulation layer), of black non- woven fibre glass tissue of nominal thickness 0.5 mm and nominal mass not less than 60 gm/sqm, made of randomly oriented glass fibres distributed in a binder by a wet-lay process including fixing 1.5 mm thick solid aluminum sheet backing using, 6 mm thick cement board including SS rivets, nuts, bolts, washers etc complete. sqm

207 0.9 Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc., included in cost of relevent Item). (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. sqm

208 0.9 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel (ACP) Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels etc. including: with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer- in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. upto two decimal places.

8.7.1 4 mm thick alumminium composite pannel material consisting of 3 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.5mm thick) sqm

8.7.2 4 mm thick alumminium composite pannel material consisting of 3.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) sqm

8.7.3 3 mm thick alumminium composite pannel material consisting of 2.5 mm thick FR grade mineral core sandwiched between two alumminium sheets (each 0.25mm thick) sqm

209 0.0 Design, supply and installation of suspended Spider Glazing system designed to withstand the wind pressure as pr IS 875 (Part- III). The Suspended System held with Spider Fittings of SS-316 Grade Steel of approved manufacturer with glass panel having 12 mm thick clear toughened glass held together with SS- 316 Grade Stainless steel Spider and other incidental charges including wastage, enabling temporary services all fitting fixers nut bolts, washer, Buffer plates, fastener, anchors, SS channel laminated glass etc. all complete.For the purpose of payment actual elevation area of Glazing including thickness of joints and the portion of Glass panel inside the SS channel shall be measured. Sqm

210 0.0 Providing and fixing aluminium magnesium alloy (FACADE) wall cladding system consisting of panels 200mm wide x 17mm deep x 0.5mm thick of maximum length of 6.0 mtr. coil coated on a continuous paint line double baked and roll formed from centre to centre at a distance of maximum 1.20 mtr. The stringer shall be fixed to a suitable rigid structure. All panels shall be achromatised for maximum bond between metal and paint, enamelled twice under high temperature one side with full primer and the other side (inner side) with a primer coat on a continuous paint line, and fixed as per the direction of the Engineer-in-Charge. sqm

211 Providing and fixing Aluminium Magnesium alloy Plain Panel Sun Louvres of approved colour consisting of panel 84 mm wide x 16mm deep x 0.6mm thick with round edges panel length upto 6 mtrs coil coated on a continuos paint line double baked between metal and paint, enamelled twice under high temperature one side with full primer and finish, the other side (inner side) with a primer coat and Skin Coat on a Continuos Paint Line. Note: - 1. The cost of providing extruded aluminium frames, shadow boxes, extruded aluminium section capping for fixing in the grooves of the curtain glazing shall be paid for separately under relevant items under this subhead. However, for the purpose of payment, only the actual area of structural glazing (including width of grooves) on the external face shall be measured in sqm. upto two decimal places. sqm

212 0.9 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for separately).

9.1.1 Second class teak wood cum

9.1.2 Sal wood cum

9.1.3 Kiln Head wood seasoned and chemically treated hard wood (Haldu, Kail, Bija wood.) cum

9.1.4 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood.

9.1.4.1 Frame of size 100mmX60mm single or double rebate meter

9.1.4.2 Frame of size 120mmX60mm double rebate. meter

213 0.9 Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001(Part-B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia and length ( hold fast lugs or dash fastener shall be paid for separately). cum

214 0.0 Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position ( with necessary stainless steel screw)

9.3.1 Sal wood cum

9.3.2 Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood. cum

9.3.3 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. cum

215 0.0 Extra for additional labour wood work in circular shape, such as in frames of fan light :

9.4.1 Second class teak wood cum

9.4.2 Sal wood cum

9.4.3 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. cum

9.4.4 Factory made Kiln seasoned, chemically treated, finger jointed at spacing not closer than 50 cm, 2nd class hard wood. cum

216 0.0 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws excluding, panelling/glazing which will be paid for separately, all complete as per direction of Engineer-in-charge.

9.5.1 Second class teak wood

9.5.1.1 35 mm thick shutters sqm

9.5.1.2 30 mm thick shutters sqm

9.5.2 Kiln seasoned and chemically treated hardwood Haldu, Kail, Bija wood.

9.5.2.1 35 mm thick shutters sqm

9.5.2.2 30 mm thick shutters sqm

9.5.3 Kiln seasoned selected planks of sheesham wood.

9.5.3.1 35 mm thick shutters sqm

9.5.3.2 30 mm thick shutters sqm

9.5.4 Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood shutters

9.5.4.1 35 mm thick sqm

9.5.4.2 30 mm thick sqm

217 0.9 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:

9.6.1 Second class teak wood sqm

9.6.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood sqm

9.6.3 15mm thick Factory made Kiln seasoned, chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood. sqm

9.6.4 Ply wood 5 ply, 9 mm thick :

9.6.4.1 Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type. sqm

9.6.4.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type sqm

9.6.5 Ply wood 7 ply, 9 mm thick :

9.6.5.1 Decorative plywood both side decorative veneer (Type- I) conforming to IS 1328 BWR type. sqm

9.6.5.2 Decorative plywood one side decorative veneer and commercial veneer on other face (Type-1) conforming to IS 1328 BWR Type sqm

9.6.6 Particle Board 12 mm thick

9.6.6.1 Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked. sqm

9.6.6.2 Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS: 3097, grade I. sqm

9.6.6.3 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked. sqm

9.6.6.4 Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS: 12823 marked. sqm

9.6.6.5 Coir Veneer Board (conforming to IS 14842) 12 mm thick sqm

9.6.7 Float glass panes

9.6.7.1 4 mm thick glass pane (weight not less than 10 kg/sqm) sqm

9.6.7.2 5 mm thick glass pane (weight not less than 12.5 kg/sqm) sqm

9.6.8 Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. Wire and 1.4 mm wide aperture with matching wood beading sqm

9.6.8.1 4mm to 5mm thick integral PVC form sheet with Celluka finish surface on both side with density not less than 600 kg/cum sqm

9.6.8.2 4mm to 5mm thick laminated PVC form sheet with density not less than 600 kg/cum, laminated on both sides by 0.12 mm thick sqm

laminated sheet with density not less than 1400 kg/cum

218 0.9 Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS : 14616 and TADS 15:2001 (Part B) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, all complete as per directions of Engineer-in- charge and panelling with panels of:

9.7.1 12mm thick plain grade - 1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT - I IS : 3087 marked bonded with BWP type synthetic resin adhesive as per IS : 848 : sqm

9.7.2 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade - 1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT - I, conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and pre- lamination conforming to IS : 12823 Grade 1, Type - II marked: sqm

9.7.3 12 mm thick one side pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade - 1 medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS : 3087 bonded with BWP type synthetic resin adhesive as per IS : 848 and prelamination conforming to IS : 12823 Grade -1, Type II marked: sqm

219 0.0 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.

9.8.1 Second class teak wood

9.8.1.1 35 mm thick sqm

9.8.1.2 30 mm thick sqm

9.8.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood

9.8.2.1 35 mm thick sqm

9.8.2.2 30 mm thick sqm

9.8.3 Kiln seasoned selected planks of sheesham wood.

9.8.3.1 35 mm thick sqm

9.8.3.2 30 mm thick sqm

9.8.4 Factory made Kiln seasoned chemically treated and finger jointed at spacing not closer than 50cm, 2nd class hard wood

9. 8.4.1 30 mm thick shutters sqm

9. 8.4.2 35 mm thick shutters sqm

220 0.0 Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B) , using 4mm thick float glass panes for doors, windows and clerestory windows including ISI marked fixing with M.S. pressed butt hinges bright finished of required size with necessary screws as per directions of Engineer-in- charge. 30 mm thick shutters. sqm

221 Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured)

9.10.1 5 mm thick instead of 4 mm thick. sqm

9.10.2 10 to 12 mm float glass sqm

9.10.3 5.5 mm safety glass sqm

9.10.4 10-12mm safety glass sqm

222 Extra for providing frosted glass panes 4 mm thick instead of ordinary float glass panes 4mm thick in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). sqm

223 Deduct for providing pin headed glass panes instead of ordinary float glass panes 4mm thick in doors, windows and clerestory windows, shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). sqm

224 Extra for S.S, hinges providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). sqm

225 Deduct for not providing hinges in doors, windows or clerestory window shutters with :

9.14.1 Stainless steel butt hinges with stainless steel screws for 2nd class teak wood and other class of wood shutters. sqm

9.14.2 ISI marked M.S. pressed butt hinges bright finished of required size For 2nd class teak wood and other class of wood shutters. sqm

226 Providing and fixing 25 mm thick Second class teak wood shutters using 4mm float glass for cup board etc. :

9.15.1 Panelled or panelled and glazed shutters :

9.15.1.1 Using ISI marked anodised aluminium butt hinges with necessary screws. sqm

9.15.1.2 Using ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. sqm

9.15.2 Glazed shutters :

9.15.2.1 Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws. sqm

9.15.2. 2nd class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. sqm

227 Providing and fixing flat pressed 3 layer particle board medium density exterior grade (Grade I) or graded wood particle board IS : 3087 marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) :

9.16.1 12 mm thick sqm

9.16.2 18 mm thick sqm

228 Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked with one side decorative and other side balancing lamination Grade I,Type II exterior grade IS :12823 marked in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).

9.17.1 18 mm thick sqm

9.17.2 25 mm thick sqm

229 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutter.

9.18.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm

9.18.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm

9.18.3 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws. sqm

230 Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.

9.19.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm

9.19.2 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. sqm

9.19.3 25mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. sqm

231 Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) On one side only. sqm

232 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). sqm

233 Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured)

9.22.1 Rectangular or square. sqm

9.22.2 Circular. sqm

234 Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). sqm

235 Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). sqm

236 Providing and fixing wire gauze shutters using galvanised M.S. wire gauze of average width of aperture 1.4mm in both direction with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws:

9.25.1 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size.

9.25.1.1 Second class teak wood. sqm

9.25.1.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. sqm

9.25.1.3 Kiln seasoned selected class of sheesham wood. sqm

9.25.2 35 mm thick shutters with ISI marked stainless steel butt hinges of required size.

9.25.2.1 Second class teak wood. sqm

9.25.2.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. sqm

9.25.2.3 Kiln seasoned selected class of sheesham wood. sqm

9.25.3 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size.

9.25.3.1 Second class teak wood. sqm

9.25.3.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. sqm

9.25.3.3 Kiln seasoned selected class of sheesham wood. sqm

9.25.4 30 mm thick shutters with ISI marked stainless steel butt hinges of required size.

9.25.4.1 Second class teak wood. sqm

9.25.4.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. sqm

9.25.4.3 Kiln seasoned selected class of sheesham wood. sqm

237 Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS : 14616, and as per TADS 15 :2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS :1568 for doors, windows and clerestory windows including ISI marked M.S. pressed fixing with butt hinges bright finished of required size with necessary screws as per directions of Engineer-in-charge:

9.26.1 35 mm thick shutters sqm

9.26.2 30 mm thick shutters sqm

238 Providing 50x50x50mm 2nd class teak wood plugs including cutting brick work and fixing in cement mortar 1:3 (1 cement : 3 sand) and making good the walls etc. each

239 Providing and fixing expandable fasteners of specified size with necessary plastic sleeves and galvanised M.S. screws including drilling holes in masonry work /CC/ R.C.C. and making good etc. complete.

9.28.1 25 mm long each

9.28.2 32 mm long each

9.28.3 40 mm long each

9.28.4 50 mm long each

9.28.5 60 mm long each

240 Providing and fixing 2nd class teak wood plain lining tongued and grooved including wooden plugs complete with necessary screws and priming coat on unexposed surface.

9.29.1 40 mm thick. sqm

9.29.2 25 mm thick. sqm

9.29.3 20 mm thick sqm

9.29.4 12 mm thick sqm

241 Providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood Pre- laminated one side decorative lamination on other side balancing lamination Grade I, Type II, IS : 12823 marked including priming coat on

unexposed surface, with necessary fixing arrangement and screws etc. complete :

9.30.1 12 mm thick sqm

9.30.2 18 mm thick sqm

9.30.3 25 mm thick sqm

242 Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and drilling necessary holes for rawl plug etc. including priming coat complete. Kiln seasoned and chemically treated Haldu, Kail, Bija wood. cum

243 Providing and fixing plywood 4 mm thick one side decorative veneer conforming to IS: 1328 (type-1) for plain lining / cladding with necessary screws, priming coat on unexposed surface with: Decorative veneer facings of approved manufacture. sqm

244 Providing and fixing 4mm thick coir veneer board, ISI marked IS:14842, plain lining with necessary screws, priming coat on unexposed surface etc., complete. sqm

245 Providing and fixing skirting of Pre- laminated with(one side decorative and other side balancing lamination) flat pressed, 3 layer or graded particle board (medium density) Grade I, Type II, IS :12823 marked, with necessary fixing arrangements and screws including drilling necessary holes for rawl plugs etc. and priming coat on unexposed surface complete :

9.34.1 18 mm thick sqm

9.34.2 25 mm thick sqm

246 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete :

9.35.1 2nd class teak wood

9.35.1.1 50x12 mm metre

9.35.1.2 50 x 20 mm metre

9.35.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood.

9.35.2.1 50x12 mm metre

9.35.2.2 50x20 mm metre

247 Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately) including fixing 50x12 mm beading complete with : Second class teak wood. sqm

248 Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density grade I, IS : 3087 marked,, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. metre

249 Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842, including top cover of 6 mm coir veneer board, nickle plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with Haldu, Kail, Bija wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. metre

250 Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18mm thick 150mm wide.

9.39.1 Non decorative veneer on both sides. metre

9.39.2 Particle board with decorative veneering on both sides. metre

251 Providing and fixing teak wood lipping of size 25x3 mm in pelmet. metre

252 Providing and fixing of 1.25 mm thick chromium plated brass plate, with two chromium plated curtain rods brass brackets fixed with C.P. brass screws and wooden plugs, etc., wherever necessary complete:

9.41.1 12 mm dia. metre

9.41.2 20 mm dia. metre

9.41.3 25 mm dia. metre

253 Providing and fixing nickel plated curtain rods M.S. pipe with nickel plated brackets :

9.42.1 20 mm dia (heavy type) metre

9.42.2 25 mm dia (heavy type) metre

254 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

9.43.1 Fixed to steel windows by welding. Kg

9.43.2 Fixed to openings /wooden frames with rawl plugs screws etc. Kg

255 Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of II nd class teak wood and priming coat with approved steel primer all complete. sqm

256 Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. sqm

257 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.63 mm all complete.

9.46.1 With 2nd class teak wood beading 62x19 mm. sqm

9.46.2 With 12 mm mild steel U beading. sqm

258 Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg. per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick. sqm

259 Providing 40x5 mm flat (iron hold fast 40 cm long) (0.628 kg) including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 sand : 6 graded stone aggregate 20mm nominal size) each

260 Providing wooden beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with :

9.49.1 Sal wood. cum

9.49.2 Haldu, Kail, Bija wood. cum

261 Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :

9.50.1 125x65x2.12 mm each

9.50.2 100x58x1.90 mm each

9.50.3 75x47x1.70 mm each

9.50.4 50x37x1.50 mm each

262 Providing and fixing IS : 1341 marked M.S. heavy weight butt hinges with necessary screws etc. complete :

9.51.1 125x90x4.00 mm each

9.51.2 100x75x3.50 mm each

9.51.3 75x60x3.10 mm each

9.51.4 50x40x2.50 mm each

263 Providing and fixing ISI marked oxidised M.S. pressed butt hinges with necessary screws etc. complete.

9.52.1 125x65x2.12 mm each

9.52.2 100x58x1.90 mm each

9.52.3 75x47x1.70 mm each

9.52.4 50x37x1.50 mm each

264 Providing and fixing ISI marked oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete :

9.53.1 150x125x27x2.80 mm each

9.53.2 125x125x27x2.80 mm each

9.53.3 100x125x27x2.80 mm each

9.53.4 75x100x20x2.24 mm each

265 Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete :

9.54.1 150 mm each

9.54.2 125 mm each

9.54.3 100 mm each

266 Providing and fixing oxidised M.S. double acting spring hinges with necessary screws etc. complete.

9.55.1 150 mm each

9.55.2 125 mm each

9.55.3 100 mm each

267 Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel plating and fixing with necessary screws etc., complete.

9.56.1 Overall width 35 mm. metre

9.56.2 Overall width 50 mm. metre

9.56.3 Overall width 65 mm. metre

268 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete:

9.57.1 300x16 mm each

9.57.2 250x16 mm each

269 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete :

9.58.1 250x10 mm each

9.58.2 200x10 mm each

9.58.3 150x10 mm each

9.58.4 100x10 mm each

270 Providing and fixing ISI marked 85x42mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete each

271 Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete :

9.60.1 300x20x6 mm each

9.60.2 250x20x6 mm each

272 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete :

9.61.1 125 mm each

9.61.2 100 mm each

9.61.3 75 mm each

273 Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS : 363 with necessary screws etc. complete :

9.62.1 150 mm each

9.62.2 115 mm each

9.62.3 90 mm each

274 Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete.

9.63.1 300 mm weighing not less than 200 gms. each

9.63.2 250 mm weighing not less than 150 gms. each

9.63.3 200 mm weighing not less than 120 gms. each

275 Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors. (Weighing not less than 450 gms.) each

276 Providing and fixing ISI marked stainless steel sliding door bolts with nuts and screws etc. complete:

9.65.1 300x16 mm each

9.65.2 250x16 mm each

277 Providing and fixing ISI marked stainless steel tower bolt black finish, (Barrel type) with necessary screws etc. complete :

9.66.1 250x10 mm each

9.66.2 200x10 mm each

9.66.3 150x10 mm each

9.66.4 100x10 mm each

278 Providing and fixing ISI marked 85x42mm stainless steel pull bolt lock with necessary screws bolts, nut and washers etc. complete. each

279 Providing and fixing ISI marked stainless steel door latches with screws etc. complete :

9.68.1 300x20x6 mm each

9.68.2 250x20x6 mm each

280 Providing and fixing ISI marked stainless steel handles with necessary screws etc. complete :

9.69.1 125 mm each

9.69.2 100 mm each

9.69.3 75 mm each

281 Providing and fixing stainless steel hasp and staple (safety type) conforming to IS specification with necessary screws etc. complete :

9.70.1 150 mm each

9.70.2 115 mm each

9.70.3 90 mm each

282 Providing and fixing stainless steel casement stays (straight peg type) conforming to IS specification with necessary screws etc. complete.

9.71.1 300 mm weighing not less than 200 gms. each

9.71.2 250 mm weighing not less than 150 gms. each

9.71.3 200 mm weighing not less than 120 gms. each

283 Providing and fixing stainless steel safety chain with necessary fixtures for doors. Conforming to IS specification (Weighing not less than 450 gms.) each

284 Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete :

9.73.1 125x64x1.90 mm each

9.73.2 100X58X1.90 mm each

9.73.3 75x47x1.80 mm each

9.73.4 50x37x1.50 mm each

285 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete :

9.74.1 125x64x2.50 mm each

9.74.2 100x60x2.50 mm each

9.74.3 75x50x2.50 mm each

286 Providing and fixing 50 mm Stainless steel cup board or wardrobe knob with necessary screws (best make of approved quality) each

287 Providing and fixing Stainless steel hanging type floor door stopper with necessary screws, etc. complete. each

288 Providing and fixing bright finished brass butt hinges with necessary screws etc. complete :

9.77.1 125x85x5.5 mm (heavy type) each

9.77.2 125x70x4 mm (ordinary type) each

9.77.3 100x85x5.5 mm (heavy type) each

9.77.4 100x70x4 mm (ordinary type) each

9.77.5 75x65x4 mm (heavy type) each

9.77.6 75x40x2.5 mm (ordinary type) each

9.77.7 50x40x2.5 mm (ordinary type) each

289 Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete :

9.78.1 150x125x27x5 mm each

9.78.2 125x125x27x5 mm each

9.78.3 100x125x27x5 mm each

9.78.4 75x100x20x3.2 mm each

290 Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :

9.79.1 400x10 mm each

9.79.2 250x10 mm each

9.79.3 200x10 mm each

9.79.4 150x10 mm each

9.79.5 100x10 mm each

291 Providing and fixing bright finished brass door latch with necessary screws etc. complete.

9.80.1 300x16x5 mm each

9.80.2 250x16x5 mm each

292 Providing and fixing bright finished brass handles with necessary screws etc. complete.

9.81.1 125 mm each

9.81.2 100 mm each

9.81.3 75 mm each

293 Providing and fixing bright finished brass sliding door bolts with nuts and screws etc complete.

9.82.1 300x16mm each

9.82.2 250x16mm each

294 Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). each

295 Providing and fixing bright finished brass 100 mm mortice latch and lock ISI marked with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles with necessary screws etc. complete (Best make of approved quality). each

296 Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). each

297 Providing and fixing bright finished brass night latch including necessary screws etc. complete (best make of approved quality). each

298 Providing and fixing special quality bright finished brass cupboard or wardrobe locks with four levers including necessary screws etc. complete (best make of approved quality) :

9.87.1 40 mm each

9.87.2 50 mm each

9.87.3 65 mm each

9.87.4 75 mm each

299 Providing and fixing 50 mm bright finished brass cup board or wardrobe knob with necessary screws (best make of approved quality) each

300 Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. each

301 Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. each

302 Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete :

9.91.1 300 mm weighing not less than 330 gms each

9.91.2 250 mm weighing not less than 280 gms each

9.91.3 200 mm weighing not less than 240 gms each

303 Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete:

9.92.1 150 mm each

9.92.2 115 mm each

9.92.3 90 mm each

304 Providing and fixing Cromium plated brass hanging type floor door stopper with necessary screws, etc. complete. each

305 Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm) with necessary accessories and screws etc. complete. each

306 Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm) with double speed adjustment with necessary accessories and screws etc. complete. each

307 Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality). each

308 Providing and fixing chromium plated brass 100 mm mortice latch with one dead bolt and a pair of lever handles with necessary screws etc. complete (best make of approved quality). each

309 Providing and fixing chromium plated brass night latch including necessary screws etc. complete (Best make of approved quality). each

310 Providing and fixing special quality chromium plated brass cupboard locks with six levers including necessary screws etc. complete (Best make of approved quality) of :

9.99.1 Size 40 mm each

9.99.2 Size 50 mm each

9.99.3 Size 65 mm each

9.99.4 Size 75 mm each

311 0.999 Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. each

312 0.000 Providing and fixing chromium plated brass sliding door bolts ISI marked with nuts and screws etc complete.

9.101.1 300x16mm each

9.101.2 250x16mm each

313 0.000 Providing and fixing chromium plated brass tower bolts ISI marked with nuts and screws etc complete.

9.102.1 400X10mm each

9.102.2 300x10mm each

9.102.3 250x10mm each

9.102.4 200x10 mm each

9.102.5 150x10 mm each

9.102.6 100x10 mm each

314 0.999 Providing and fixing chromium plated brass door latch ISI marked with necessary screws etc complete.

9.103.1 300x16x5mm each

9.103.2 250x16x5mm each

315 0.999 Providing and fixing chromium plated brass night latch ISI marked with necessary screws etc complete. each

316 0.000 Providing and fixing chromium plated brass handles with necessary screws etc. complete:

9.105.1 125 mm each

9.105.2 100 mm each

9.105.3 75 mm each

317 0.999 Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. each

318 0.999 Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete :

9.107.1 300 mm weighing not less than 330 gms each

9.107.2 250 mm weighing not less than 280 gms each

9.107.3 200 mm weighing not less than 240 gms each

319 0.000 Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: Note:- Aluminum hinges shall not be used in wooden shutters.

9.108.1 125x75x4 mm each

9.108.2 125x63x4 mm each

9.108.3 100x75x4 mm each

9.108.4 100x63x4 mm each

9.108.5 100x63x3.2 mm each

9.108.6 75x63x4 mm each

9.108.7 75x63x3.2 mm each

9.108.8 75x45x3.2 mm each

320 0.999 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete:

9.109.1 300x16 mm each

9.109.2 250x16 mm each

321 0.999 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

9.110.1 400X10mm each

9.110.2 300x10 mm each

9.110.3 250x10 mm each

9.110.4 200x10 mm each

9.110.5 150x10 mm each

9.110.6 100x10 mm each

322 0.000 Providing and fixing aluminium pull bolt lock anodised ISI marked (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws bolts, nut and washers etc. complete. each

323 0.000 Providing and fixing 50cm long aluminium kicking plate 100x3.15 mm anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour or shade with necessary screws etc. complete. each

324 0.999 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:

9.113.1 125 mm each

9.113.2 100 mm each

9.113.3 75 mm each

325 0.000 Providing and fixing aluminium hanging floor door stopper ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

9.114.1 Single rubber stopper each

9.114.2 Twin rubber stopper each

326 0.000 Providing and fixing aluminium casement window stays ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. each

327 0.999 Providing and fixing aluminium tee channels (heavy duty) with rollers, stop end in pelmets as curtain rod. metre

328 0.000 Providing and fixing aluminum U beading of required size to Pre-laminated /flush door shutter including fixing etc. complete as per direction of Engineer-in-charge. kg

329 0.000 Providing and fixing PTMT handles with necessary screws etc. complete.

9.118.1 125x34x24 mm weighing not less than 23 gms. each

9.118.2 150x34x24 mm weighing not less than 26 gms. each

330 0.999 Providing and fixing PTMT Butt hinges with necessary screws etc. complete.

9.119.1 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms. each

9.119.2 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms. each

331 0.999 Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete.

9.120.1 152x42x18 mm weighing not less than 60 gms. each

9.120.2 202x42x18 mm weighing not less than 78 gms. each

332 0.000 Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms. each

333 0.999 Providing and fixing PTMT hanging type floor door stoper with necessary screws etc complete. each

334 0.999 Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws:

9.123.1 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size.

9.123.1.1 Second class teak wood. sqm

9.123.1.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. sqm

9.123.1.3 Kiln seasoned selected class of sheesham wood. sqm

9.123.2 35 mm thick shutters with ISI marked stainless steel butt hinges of required size.

9.123.2.1 Second class teak wood. sqm

9.123.2.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. sqm

9.123.2.3 Kiln seasoned selected class of sheesham wood. sqm

9.123.3 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size.

9.123.3.1 Second class teak wood. sqm

9.123.3.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. sqm

9.123.3.3 Kiln seasoned selected class of sheesham wood. sqm

9.123.4 30 mm thick shutters with ISI marked stainless steel butt hinges of required size.

9.123.4.1 Second class teak wood. sqm

9.123.4.2 Kiln seasoned and chemically treated Haldu, Kail, Bija wood. sqm

9.123.4.3 Kiln seasoned selected class of sheesham wood. sqm

335 0.000 Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.

9.124.1 With 2nd class teak wood beading 62x19 mm. sqm

9.124.2 With 12 mm mild steel U beading. sqm

336 0.000 Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of Haldu, Kail, Bija wood in scantling of section 50x25mm fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. sqm

337 0.999 Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 50x50mm (base and height). metre

338 0.000 Providing and fixing 2nd class teak wood lipping/ moulded beading or Taj beading of size 18x5mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer- in-charge. metre

339 0.000 Providing and fixing bright finished 100mm mortice lock with 6 levers without pair of handles for aluminium door with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. each

340 0.999 Providing and fixing magnetic catcher in cupboard / ward robe shutters including fixing with necessary screws etc. complete (Best make of approved quality).

9.129.1 Triple strip vertical type. each

9.129.2 Double strip (horizontal type). each

341 0.000 Providing and fixing magic eye in door shutters including fixing. Complete (Best make of approved quality). each

342 0.000 Providing and fixing powder coated telescopic drawer channels with necessary screws etc. complete as per directions of Engineer-in-charge.

9.131.1 300mm long each set

9.131.2 450mm long each set

9.131.3 500mm long each set

343 0.999 Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter by P/F stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) each

344 0.999 Providing and fixing 12mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and

clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick.

9.133.1 Marine plywood conforming to IS: 710 sqm

9.133.2 Fire retardant plywood conforming to IS: 5509. sqm

345 0.000 Providing and Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt / suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S including cost of adhesive of approved quality.

9.134.1 1.5 mm thick. sqm

9.134.2 1.0 mm thick. sqm

346 0.999 Providing and fixing cup board shutters 25mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked exterior grade (Grade l Type ll) having one side decorative lamination and other side balancing lamination including IInd class teak wood lipping of 25mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of the Engineer-in-Charge sqm

347 0.999 Providing and fixing cup board shutters with 25mm thick veneered particle board IS : 3097 marked exterior grade (Grade I) of approved make including IInd class teak wood lipping of 25mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges complete as per direction of Engineer-in- Charge.

9.136.1 With decorative veneering on one side and commercial veneering on other side. sqm

9.136.2 With non decorative veneering on both sides. sqm

348 0.000 Providing and fixing factory made shutters of 25 mm thick Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium 'U' type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in-Charge (Cost of 'U' beading and hinges will be paid for separately). sqm

349 0.999 Providing and fixing in wall lining MDF board medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete.

9.138.1 12 mm thick. sqm

9.138.2 18 mm thick. sqm

9.138.3 25 mm thick. sqm

350 0.999 Providing and fixing 25mm thick pre- laminated medium density fibre board exterior grade(Grade-I) IS:14587:1998 marked one side decorative to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickeled plated bright finishing M.S. piano hinges IS:3818 marked with necessary screwed complete sqm

351 0.000 Providing and fixing skirting with Pre- laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand complete.

9.140.1 18 mm thick sqm

9.140.2 25 mm thick sqm

352 0.000 Providing and fixing partition upto ceiling height consisting of G.I. frame and required board including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a

flush finish with recommended jointing compound, jointing tape, angle beads at corner (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture's specification and direction of engineer in charge all complete.

9.141.1 75mm overall thickness partition with 12.5 mm thick double skin fire rated glass reinforced gypsum (GRG) plaster board conforming to IS: 2095: part 3 1996 Board with BIS certification marks. sqm

9.141.2 75mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS:2095: part I 1996 Board with BIS certification marks. sqm

9.141.3 66mm overall thickness Partition with 8mm thick double skin Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./sq.cm. sqm

9.141.4 66mm overall thickness partition using 8mm thick double skin non- asbestos multipurpose cement board reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) as per IS: 14862 with suitable fibre cement screw. sqm

9.141.5 68mm over all thickness partition using 9mm thick Heavy Duty Fibre Cement Board double skin non asbestos, reinforced with cellulose fibre,manufactured through autoclaving proces(High presssure steam cured)Type A, Category 4 onforming to IS 14862:2000. (for wet areas) sqm

9.141.6 70 mm overall thickness Partition using 10mm thick double skin non-asbestost multipurpose termite, fire & moisure resistance (acoustic 30db) cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. sqm

353 0.999 Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the 'W' profile (0.55mm thick ) having a knurled web of 51.55mm and two flanges of 26mm each with lips of 10.55 mm, placed @ 610mm C/C with fully threaded self- tapping dry wall screws. Board is fixed to the 'W' profile with 25 mm countersunk ribbed head screws @ 200mm C/C., all complete as per the drawing and directions of engineer-in-charge the joints of the boards are finished with specially formulated jointing compound and 48mm wide jointing tape to provide seamless finish.

9.142.1 10 mm thick tapered edge calcium silicate board made with calcareous and siliceous materials reinforced with cellulose fibre manufactured through autoclaving process to give stable crystalline structure, with compressive strength 225 kg/sq.cm, Bending strength 100 kg/sq.cm. sqm

9.142.2 12 mm thick Gypsum board conforming to IS: 2095 Part-I. sqm

9.142.3 8 mm thick non-asbestost multipurpose termite, fire & moisure resistance cement bonded particle board as per IS: 14276 with suitable cement bonded board screw. sqm

9.142.4 8mm Both side Factory Prelamianted cement bonded particle board as per IS: 15786. sqm

9.142.5 9mm thick non asbestos,heavy duty fibre cement board reinforced with cellulose fibre manufactured through autoclaving process(High pressure steam cured) Type A,Category 4, conforming to IS 14862. sqm

354 0.000 Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically and horizontally ) including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer- in-charge. kg

355 0.000 Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory sqm

windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25mm to 40mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick confirming to IS:14587

356 0.999 Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS: 14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).

9.145.1 Board 12 mm thick sqm

9.145.2 Board 18 mm thick sqm

357 0.000 Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I(exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately).

9.146.1 18 mm thick sqm

9.146.2 25 mm thick sqm

358 0.000 Providing and Installation of acoustical wall panelling fabric finish hardened square edge, FR grade fabric (colour as approved by Egnineer in charge) wrapped soft fibre core (glass fibre) panel having metal framing, of size 600x2100x25mm having density 100-120Kgs/ m3, weight 3.0kg/m2 NRC up to 0.9 installed by using impaling clip. Impaling clips are attached directly to the wall/frame work with the points extending outward. Then panels shall positioned and pressed into place. sqm

359 0.999 Providing and installation of acoustical wall panelling wood finish Slats made out of HDF board , Melamine / veneer laminated finish, perforated wooden grooved slats (2mm grooves @ 8mm centers) / (2mm Slats @16mm pitch) / (2mm grooves @ 32mm centers) / (2mm grooves @ 64mm centers), Aluminium core cross channel having thickness 0.5mm, length 2400mm, web 15mm and 27mm, depth 18mm and flanges of 7mm with suitable edge and centre brackets is then fixed perpendicular to the cross channel with the help of fasteners at every 400mm centers. Contractor to Provide expansion joints of 3mm at every 5mts bothways. sqm

360 0.999 Providing and installation of paintble acoustic wall panelling consisting of strand kerfed edge paint finished as approved by Engineer in charge. magnesite bonded wood fiber panels of size 600x2400x20mm having density 400kg/m3, weight 8- 20kg/m2 which is fixed to GI strut system. fastened to wall positioned horizontally in a regular manner at 600mm centers. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channel at 600mm centers. The Kerfed edge panels shall be then inserted into the H-spline against wall to perfect fit.

9.149.1 Wt. 8.20 kg/m2 sqm

9.149.2 Wt. 4.2 kg/m2 sqm

361 0.000 Providing and fixing plain lining with necessary screws/nuts and bolts/ nails including a coat of approved primer on one face and fixed on wooden /steel frame work complete as per direction of Engineer-in-charge. (Frame work shall be paid for separately) sqm

9.150.1 12mm thick commercial ply conforming to IS: 1328 BWR type. sqm

9.150.2 18 mm thick commercial ply conforming to IS: 1328 BWR type. sqm

362 0.999 Providing and Installation of acoustic wall panelling consisting of Soak Coard of selected colours as approved by Engineer in charge. Kerf edge Fabric wrapped wood fiber panels of size 600x2400x20mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI strut system. PVC Vinyl core UV treated H-Spline having thickness 2mm and length 2400mm to be fixed perpendicular to the Cross channels at 600mm centers. Kerfed edge Fabric wrapped panels shall be then inserted into the H-spline against wall to perfect fit. sqm

363 0.999 Providing and Installation of acoustic wall panelling consisting of Soak Cord of selected colours as approved by Engineer in charge, square edge Fabric wrapped wood fiber panels of size 600x1200x10mm having density 400Kgs/m3, weight 4- 20kg/m2 installed by using GI struts,Z bars. GI Z bars having 40mm height, thickness 1.2mm is first fixed behind the panels by identifying resin spots by using suitable fasteners.Clean exposed surfaces of wall and ensure walls are in plumb line before installing on wall (provide necessary packing shims if required). Soak cord square edge panels shall be slided into the Z bars fixed on wall. sqm

364 0.000 Providing and installation of acoustic wall panelling consisting of Stretch NRC by using FR Grade NRC fabric of size 1700mm width, shall be stretched by using wooden base 10mm thick, rigid vinyl Stretch Tracks half wrap/ full wrap 25mm and Midseam 300mm centers. The fabric is stuck on the Align Tape (by removing the protective cover) at the same time as being stretched and tucked into the Stretch tracks and secure into the locking jaws so that it will be smooth, free of wrinkles with the tucking tools. Note -minimum 50mm additional fabric is required for tucking hence maximum module width would be 1600mm. sqm

365 0.999 Providing and Installation of wall panelling consisting of Square edge Magnesia core panels of size1100x2400x8mmmm having density 1000kgs/m3, weight 8kg/m2 installed by using GI Strut system. The GI struct system includes Cross channel having thickness 0.45mm, length 3600mm, knurled web 40, depth 10mm and equal flanges of 15mm is fastened to wall positioned horizontally in a regular manner at 600mm c/c.The panels to be fixed on the cross channel with suitable fasteners. sqm

366 0.999 Supplying and installation of magnesia block 66 mm thick drywall partition including Framework includes Floor/ Head GI channels having thickness 0.5mm, length 3600mm, equal flanges of 32mm and web of 50mm fixed to floor and ceiling with suitable fasteners at 300mm centers staggered. Second layer of magenesia oxide block 8mm thick should be fixed other side of the frame work similar fashion as the first layer. 3mm gap should be maintained between boards.3 mm gap shall be filled with jointing compound. Magnesia oxide block shall have following physical charecterstics.

9.155.1 Using 8mm thick magnesia block sqm

9.155.2 Using10mm thick magnesia block sqm

9.155.3 Using12mm thick magnesia block sqm

9.155.4 Using12mm thick magnesia block sqm

367 0.000 Add extra for providing and fixing Thermal insulation by providing 50mm thick synth PF having dencity 1000 GSM within the cavity held in position by using chicken wire mesh/ cross bracing/ pasting to the wall. sqm

368 0.000 Providing and laying Gypsum panel partitions 100mm thick with water proof Gypsum panels of size 666x500x100mm, made of calcite phosphor Gypsum fixed with tongue and groove, jointed with bonding plaster as per manufacturers specifications in superstructure above plinth level up to floor II level. Gypsum blocks will have a minimum compressive strength of 9.3 kg/cm2. sqm

369 0.999 Providing and fixing factory made UPVC door frame made of UPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frame reinforced by galvanized M.S. tube of size 19 X 19mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge:

9.158.1 Extruded section Profile size 48x40 mm. metre

9.158.2 Extruded section Profile size 42x50 mm. metre

370 0.000 Providing and fixing Panelled UPVC door shutter to existing door frames. 24 mm thick factory made UPVC door shutters made of styles and rails of a UPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter). sqm

371 0.000 Providing and fixing UPVC panelled door shutter UPVC 30 mm thick factory made PVC or UPVC door shutter made of styles and rails of a UPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge sqm

372 0.999 Providing and fixing 25mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762mmx25mm or less as per requirement with an average wall thickness of 1mm (± 0.3mm). PVC foam end cap of size 23x10mm are provided on both vertical edges to ensure the overall thickness of 25mm. The Top and Bottom edges of the shutter are covered with an end-cap of the size 25mmx 11mm. Door shutter shall be reinforced with special polymeric reinforcements as per required specification and direction of Engineer-in- charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places. sqm

373 0.000 Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100mmx37mm with wall thickness 2mm (±0.2mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos. of plastic brackets of size 100mmx37mm, wall thickness 2mm (+0.2mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100mmx20 mm, and inserting 2 nos. tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer's specification and direction of Engineer-in-charge. sqm

374 0.000 Providing and Fixing, factory made, PVC door frame made of PVC extruded sections of size 75mmx53 mm, having wall thickness 2.0mm (±0.2mm). Both verticals sides of the frame reinforced with PVC profile of cross section size 28mm x 30mm x2mm thickness (± 0.2 mm) and 75mmx200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut jointed and fusion welded together, including providing and fixing 3 nos. of 125mm long stainless steel hinges to frame, fixing the frame with jamb with required nos. and sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineer-in-charge. metre

375 0.999 Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated sqm

section having overall dimension 115mm x 37mm with wall thickness , panels of 100 x 20 mm printed and laminated and inserting 2 nos. 6 mm dia. bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer's specification and direction of Engineer-in-Charge.

376 0.999 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150mm long brackets of 15x15mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19mm M.S. square tube of metre

19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size, complete as per manufacturer's specification and direction of Engineer-in- Charge.

377 0.000 Providing and fixing factory made 30 mm thick PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top and bottom rails. M.S. frame shall have a coat of steel primers and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge. Manufacturer’s specification and drawing

9.166.1 Plain PVC door shutters. sqm

9.166.2 Pre laminated PVC door shutters. sqm

378 0.999 Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width and 32 mm thickness, frame will be mitred and Jointed with self driven self tapping screws of size 38 mm x 4 mm and PVC solvent cement, including fixing the frame to wall with suitable dia and length anchor fastener as per manufacturer’s specification and direction of Engineer-in-charge. metre

379 0.999 Providing and fixing factory made 30 mm thick door shutter made of solid PVC foam profile. The styles and rails shall be of size 75 mmx30 mm having wall thickness 5 mm. The styles, top and bottom rails shall have one side wall thickness of 15 mm integrally extruded in the middle of the lock rail and fixed with styles with the help of PVC solvent cement and self driven self tapping screws of size 100 mmx8 mm complete as per manufacturer's specifications and direction of Engineer-in-charge:

9.168.1 Non decorative finish. sqm

9.168.2 Decorative finish (both side wood grained finish). sqm

380 0.000 Providing and fixing factory made single extruded WPC(Wood Polymer Composite) solid door/window/ceosetory windows and other frames/chowkhat comprising of virgin polymer of K value 58-60 of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S. hold fast/lugs/S.S.dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/lugs or S.S. dash fasteners shall be paid separately)

9.169.1 Single rebate (75 mm X 50 mm) RM

9.169.2 Single rebate (100 mm X50 mm) RM

9.169.3 Single or double rebate (125 mm X 65 mm) RM

381 0.999 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)30 mm thick WPC (Wood polymer composite) solid plain flush door shutter

9.170.1 24 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm

9.170.2 28 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm

9.170.3 30 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm

9.170.4 35 mm thick WPC (Wood polymer composite) solid plain flush door shutter sqm

382 0.999 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) .

9.171.1 30 mm thick WPC (Wood Polymer Composite)solid decorative type flush door shutter sqm

9.171.2 35 mm thick WPC (Wood Polymer Composite) solid decorative type flush door shutter sqm

383 0.000 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white colour and other side of board laminated with PVC foil of minimum 14 micron thickness of approved design pasted with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately)

9.172.1 18 mm thick sqm

9.172.2 25 mm thick sqm

384 0.000 Providing and fixing factory made single extruded WPC (Wood polymer composite solid plain white color board for backing of cupboards and bathrooms/ kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-in-Charge. (Note: stainless steel screws shall be paid separately)

9.173.1 6 mm thick sqm

9.173.2 12 mm thick sqm

385 0.999 Providing and fixing factory made 18 mm thick single extruded WPC (Wood Polymer Composite) solid plain white colour board Jali CNC (Computer numeric control) routed of approved design by Engineer-in -charge which are machine cut for duct/shaft covering, partitions and facades comprising of virgin polymer of K value 58-60 of approved steel primer, placed at grid made at 1.0 x 1.0 m sqm

or as per requirement at site with necessary stainless steel fasteners and SS screws etc., all complete as per direction of Engineer-In-Charge. (Note: M.S (mild steel) framework with priming coat and necessary SS fasteners and SS screws shall be paid separately.

386 0.000 Providing and fixing PVC Door Frame of size 50x47mm with a wall thickness of 5 mm (±0.2 mm) made out of single piece extruded PVC profile, with mitred cut joints and joint with 2nos of PVC bracket of size 40x20mm M.S. rectangular tube of 0.8 mm , including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8x100mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge metre

387 0.000 35 mm thick factory made Solid panel PVC Door shutter made out of single piece extruded soild PVC profiles, 5mm (±0.2mm) thick, having styles and rails (except lock rail) of size 95 mm x 35mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be

tapered (on both side), having one side thickness of 15 mm solid core in middle of rail section integrally extruded, fixing the styles and rails with the help of solvent and self driven self tapping screws of 125 mm x11 mm, including providing 5mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer's specification and direction of Engineer-in- charge

9.176.1 Non decorative finish (matt finish). sqm

9.176.2 Decorative finish (wood grained finish). sqm

388 0.999 Providing and fixing PVC rigid foam sheet 1mm thick on existing door shutters (bathroom and W.C. doors) using synthetic rubber based adhesive. sqm

389 0.000 Providing and fixing Fibre Glass Reinforced plastic (FRP) Door Frames of cross-section 90mm x 45mm having single rebate of 32mmx15mm to receive shutter of 30mm thickness .The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat .Doorframe laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fibreglass from all sides. MS stat shall be provided metre

390 0.000 Providing and fixing to existing door frames. 30 mm thick glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5mm thick FRP laminate for panels conforming to IS: 14856 including fixing to frames. sqm

391 0.999 Providing and fixing door frame FRP 30mm thick fiberglass reinforced Plastic (F.R.P.) flush door shutter in different plain and wood inish made with fire retardant grade unsaturated polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. sqm

392 0.999 Providing and fixing factory made Fibreglass Reinforced plastics (F.R.P.) chajja 4mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2nos. vertically and 1nos. horizontally 50x2mm thick M.S. flat with 12mm in built hole for grouting on the existing wall along with the 50mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746 duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gelcoat U/V coating on Top for complete resistance from the extreme of temperature, weather and sunlight. sqm

393 0.000 Providing and fixing fire resistant door frame of section 143x57 mm having built in rebate made out of 16 SWG G.I.sheet (zinc coating Sqm

not less than 120 gm/sqm) duly filled with vermuculite based of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in- charge (Dash fastener to be paid for separately).

394 0.999 Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II) tested and certified as per laboratory approved by Engineer-in-charge with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100mm wide, bottom rail 200mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). sqm

395 0.999 Providing and fixing glazing in fire resistant door shutters, fixed panels, ventilators and partitions etc., with G.I. beading of sqm

appropriate size made out of 20 SWG G.I.sheet (zinc coating not less than 120 gm/m2), fire resistant sealant, including applying a coat of approved fire resistant primer on G.I. beading etc. complete all as per direction of Engineer- in-charge. With clear fire resistant glass panes 6mm thick of approved brand, having minimum 60 minutes fire resistance.

396 0.000 Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch and Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. Nos.

397 0.999 Providing and Fixing factory made UPVC door frame made of UPVC exturded sections, of size 65 mmx55 mm with wall thickness 2.0 mm (±0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mmx30 mm having wall thickness 2 mm (±0.2mm), including providing and fixing 3 nos. of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number and size of anchor dash fastners, all complete as per manufacturer's specification and direction of Engineer-in-charge. metre

398 0.999 Providing and Fixing, UPVC factory made, white colour casement/sliding window and door made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware, EPDM gasket, 1.2 ± 0.2mm thick galvanised steel profile to be inserted in required profile, frame will be fixed to the wall with 8 mmx100 mm long fasteners, all complete as per direction of Engineer-in-charge. (Glazing, hardware hinges and fitting etc. to be paid separately.)

9.187.1 Casement Window (Outward/Inward opening) with hinge System.

9.187.1.1 Frame (50 mm x 50mm) metre

9.187.1.2 Sash (Style and Rail) (62 mm x 34 mm) metre

9.187.1.3 Mullion (intermediate Section) (66mm x 50 mm) metre

9.187.1.4 ‘T' Profile (one vertical length in between two shutters) (24mm x 34.5mm) metre

9.187.1.5 Glazing bead (12mm x 18mm) metre

9.187.2 Casement Window (With friction hinge and outward opening)

9.187.2.1 Casement Frame (67mm x 62mm) metre

9.187.2.2 Casement Window Sash/Mullion (67mm x75mm) (style, rail and intermediate section) metre

9.187.2.3 Casement Glazing bead (35mm x 18 mm) metre

9.187.3 Sliding Window (Two Track, 2/4 Shutters)

9.187.3.1 Two Track Sliding Frame (67mm x 52mm) metre

9.187.3.2 Sliding window Sash (60mm x 44mm) metre

9.187.3.3 Sliding Interlock for Window(one vertical length in each shutter)(45.5mmx28 mm) metre

9.187.3.4 Sliding Glazing bead (35 mm x 18 mm) metre

9.187.4 Sliding Door (Two Track, 2/4 Shutters)

9.187.4.1 Two Track Sliding Frame (67mm x 52mm) metre

9.187.4.2 Sliding Door Sash (80mm x 44mm) metre

9.187.4.3 Sliding Interlock for Door(one vertical length in each shutter)(45.5mmx28mm) metre

9.187.4.4 Sliding Glazing bead (35 mm x 18 mm) metre

399 0.000 Providing and fixing stainless steel (SS- 304 grade) friction hinges to the side/ top hung UPVC windows, of approved quality with necessary stainless steel screws etc. as per direction of Engineer-in-charge.

400 0.000 Providing and fixing casement handle made of zinc alloyed (white powder coated) for UPVC casement window with necessary screws etc. complete. each

401 0.999 Providing and fixing zinc alloyed (white powder coated) touch lock for UPVC sliding window with necessary screws etc. complete. each

402 0.000 Providing and fixing steel roller for UPVC sliding window with necessary screws etc. complete. each

403 0.000 Providing and fixing steel roller for UPVC sliding door with necessary screws etc. complete. each

404 0.999 Providing and fixing steel (white powder coated) crescent lock for UPVC sliding window/ door with necessary screws etc. complete. each

405 0.000 Providing and fixing factory made UPVC white colour casement/casement cum fixed glazed windows comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately) Note: For UPVC frame, sash and mullion extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

9.194.1 Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension. (Area of window upto 0.75 sqm.) sqm

9.194.2 Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window above 0.75 sqm upto 1.50 sqm). sqm

9.194.3 Casement window double panels with top fixed with S.S. friction hinges (350 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 2.50 sqm). sqm

9.194.4 Casement window single panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 0.75 sqm.) sqm

9.194.5 Casement window duble panel with S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm both sqm

having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.50 sqm.)

9.194.6 Casement cum fixed panel window having both and single casement panel, middle fixed panels and at top completely fixed ventilator with S.S. friction hinges (350 x 19 x 1.9 mm) made of (big series) frame 67 x 60 mm & sash 67 x 80 mm & mullion 67 x 80 all having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 3.00 sqm. Upto 5.00 sqm.) sqm

406 0.000 Providing and fixing factory made UPVC white colour fixed glazed windows/ ventilators comprising of UPVC multi- chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for

fixing frame to finished wall, plastic packers, plastic capsof approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

9.195.1 Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.) sqm

407 0.999 Providing and fixing made UPVC white colour casement/ casement cum fixed glazed door comprising of UPVC multi- chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer- in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

9.196.1 Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm). sqm

9.196.2 Casement door with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 ±. 0.2 mm and single glazing bead /double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm). sqm

408 0.999 Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of UPVC multi-chambered frame with in- built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

9.197.1 Two track two panels sliding window made of frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) sqm

9.197.2 Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). sqm

9.197.3 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension (Area of window above 1.75 sqm upto 2.50 sqm). sqm

9.197.4 Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/double glazing bead of appropriate dimension.(Area of window above 1.75 sqm). sqm

9.197.5 Three track three panels sliding window made of frame 116 x 45 mm & sash 46 x62mm both having wall thickness of 2.3 ±0.2 mm and single glazing bead/ double glazing bead of appropriate dimension.(Area of window above 1.75sqm) sqm

409 0.000 Providing and fixing factory made UPVC white colour sliding glazed window above 1.50 m in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Note: - For UPVC frame, sash and mullion extruede profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

9.198.1 Two track two panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 2.50 sqm upto 4.00 sqm). sqm

9.198.2 Two track four panels sliding window made of frame 67 x 50 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 4.00 sqm upto 8.00 sqm). sqm

410 0.999 Providing and fixing factory made UPVC white colour sliding glazed door comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section madAfter fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & directionof Engineer- in-Charge. (Single / double glass panes, wire mesh

and silicon sealent shall be paid separately).Note: - For UPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

9.199.1 Two track two panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 10.00 sqm). sqm

9.199.2 Two track four panels sliding door made of frame 67 x 50 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 8.00 sqm upto10.00 sqm). sqm

9.199.3 Three track three panels sliding door made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead/ double glazing bead of appropriate dimension. (Area of door above 5.00 sqm) sqm

9.199.4 Three track three panels sliding door with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of frame 116 x 45 mm & sash 46 x 82 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door above 2.00 sqm upto 5.00 sqm) sqm

411 0.999 Providing and fixing 30mm thick factory made solid panel prelaminated PVC internal door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 40mm x 20mm for styles top, lock and bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture PVC beading as gap insert below top and bottom rail joined together using solvent cement adhesive. An additional 5mm thick Prelaminated PVC strip of 20mm width is to be stuck on the interior side of the ‘C’ channel sqm

using PVC solvent cement adhesive etc. complete as per direction of Engineer-in- charge. Manufacturer’s specification and drawing. 30 mm thick pre laminated PVC door shutters.

412 0.000 Providing and fixing factory made integral PVC flush door shutter made from rigid PVC foam sheet(Single Extruded)with density not less than 600 kg/cum, conforming to IS:2380 part 14 for screw holding strength with Celluka finish surfaces on both sides at the manufacturing process itself, manufactured by an ISO:9001 -2000 certified company.

9.201.1 24 to 25 mm thick plain solid PVC flush door shutter sqm

9.201.2 28 to 30 mm thick plain solid PVC flush door shutter sqm

413 0.999 Providing and fixing factory made pre laminated solid PVC flush door shutters 28 to 30 mm thick made from co-extruded three layer rigid PVC foam sheet with density not less than 600 kg/cum, conforming to IS: 2380 part 14, for screw holding strength and outer layers laminated on both sides by laminated sheet with density not less than 1400 kg/cum, lamination shall be at the manufacturing process itself and manufactured by an ISO: 9001-2000 certified company.

9.202.1 1mm thick laminated sheet sqm

9.202.2 0.12 mm thick laminated sheet sqm

414 0.999 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) laminated type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens with well matched 3mm thick commercial 3ply veneering consisting of vertical grains, cross bands withing frame of door/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS: 2202. The rate shall be inclusive of all material and labour complete and as per specification and dirction of Engineer-in-Charge.

9.203.1 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. sqm

9.203.2 35mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. sqm

9.203.3 25mm thick (for cupboard) including 3 nos. 75mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. sqm

415 0.000 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202(Part-I) non decorative type, core of block board construction with kiln seasoned and chemically treated 2nd class hard wood battens (strips) and frame of kiln seasoned and chemically treated, finger jointed cross bands including all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50cm. Each shutter shall be factory made to the exact opening size within frame of doors/cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and confirmity with IS:2202.

9.204.1 35mm thick including 4 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary. sqm

9.204.2 30mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. sqm

9.204.3 25mm thick including 3 nos. 100mm long, ISI marked heavy weight (2.5mm thick) Stainless steel butt hinges with necessary screws. sqm

416 0.000 Deduct for not providing 2nd class teak wood batten lipping in factory made shutters i.e. item no 9.203 and 9.204. sqm

417 0.999 Providing & fixing acrylic solid surface in thickness 4/6/12 mm of approved colour made out of non-porous surfacing material homogeneously composed of ± 1/3 acrylic resin (also known as PolyMethyl Methacrylate -PMMA), and ± 2/3 NO extra shall be paid for joint adhesive, silicon or related accessories and for transportation. Item should cover 5 years, commercial warranty of product as per FCWS norms. The product should be UV protected for exterior applications & LGA hyginene tested anti bacterial for health care application areas. Area of application are Table Tops, Exterior facade cladding, health care areas like modular operation theater hospital scrubs, wash basins, partition & paneling, laboratory commercial show room, hotels, office & residential areas.

9.206.1 Acrylic Solid Surface sheet – Glacier white designer white

9.206.1.1 6 mm thick sheet sqm

9.206.1.2 12 mm thick sheet sqm

9.206.2 Acrylic Solid Surface sheet - Any Solid colours/Hospital use Medi Blue

9.206.2.1 6 mm thick sheet sqm

9.206.2.2 12 mm thick sheet sqm

9.206.3 Acrylic Solid Surface sheet - Any other

9.206.3.1 6 mm thick sheet sqm

9.206.3.2 12 mm thick sheet sqm

418 0.000 Providing and fixing of 8mm thick non asbestos multipurpose board reinforced with cellulose fibers for wall cladding will consist of following operations:1. Fixing of a layer of 6mm Moisture/fire Resistance Heavy Duty fibre cement Boards over above mentioned 6 mm heavy duty fibre cement board with the help of 25mm self drilling, self tapping Fibre Cement screws @ 300mm c/c. All external corners are to be protected with the use of suitable corner profile of GI or PVC. All above operation is to be done in order and as directed by Engineer-in-Charge.(frame work to be paid separately). sqm

419 0.000 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS: 15380(2003), eco-friendly, termite resistant, borer free, anti warping phenol formaldehyde (PF), decorative designe moulded or rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company’ gujcon, century, green shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B).

9.208.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm

9.208.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm

9.208.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. sqm

420 0.999 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), non decorative designe moulded and labor complete as per specifications and direction of engineer-in- charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B).

9.209.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm

9.209.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws sqm

9.209.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. piano hinges with screws. sqm

421 0.000 Providing and fixing IS marked factory made High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), 2 and 4 Panel designe moulded or plain construction with particle board shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B).

9.210.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm

9.210.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm

422 0.000 HDF decorative prelaminated pine wood panel door with glass / wiremash:- Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B).

9.211.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm

9.211.2 30 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm

423 0.999 Providing and fixing IS marked factory made veneer High Density Fibre (HDF) flush door shutters conformity to IS:15380(2003), eco-friendly, termite resistant borer free, anti warping phenol formaldehyde (PF), . The rate shall be inclusive of all material and labour complete as per specifications and direction of engineer-in-charge. Material supply company shall be registered by Bureau of Indian Standards, Member of Indian Green Building Council, ISO 9001, ISO 14001 (Environment management system), National small industries corporation(NSIC), SME Rating Agency of Indian Ltd.(SMERA), Dun and Bradstreet (D&B).

9.212.1 35 mm thick including 4 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm

9.212.2 32 mm thick including 3 nos 100 mm long ISI marked heavy weight (2.5 mm thick) Stainless Steel butt hinges with necessary screws. sqm

9.212.3 25 mm thick ISI marked heavy weight nickel plated bright finished M.S. Piano hinges with screws. sqm

424 0.999 Non Decorative Pine Wood Flush Door:- Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) non decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer- in-charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202

9.213.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. sqm

9.213.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. sqm

9.213.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. sqm

425 0.000 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned sheet shall be as per IS: 2046 type S of approved quality. Each shutter shall be factory made to the exact size (opening) within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in- charge.

9.214.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. sqm

9.214.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. sqm

9.214.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. sqm

426 0.999 Providing and fixing ISI marked factory made flush door shutters conforming to IS:2202 (Part I) laminated type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) and frame of kiln seasoned within frame of doors/cupboards and shall be stamped by the manufacturer to display nameof manufacturer, batch number of product and conformitywith IS:2202. The rate shall be inclusive of all material and labour complete and as per specification and direction of engineer-in-charge.

9.215.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. sqm

9.215.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. sqm

9.215.3 25mm thick (for cupboard) including 3 nos. 75 mm long ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. sqm

427 0.999 Providing and fixing ISI marked factory made flush door shutters conforming to IS: 2202 (Part I) veneer decorative type, core of block board construction with kiln seasoned and chemically treated 1st class pine wood battens (strips) s and commercial grade face veneers on both outer faces of shutters including kiln seasoned and chemically treated, finger jointed all material and labour complete as per specification and direction of engineer-in- charge. Spacing of finger joints in wood as above shall not be less than 50 cm. Each shutter shall be factory made to the exact opening size within frame of doors/ cupboards and shall be stamped by the manufacturer to display name of manufacturer, batch number of product and conformity with IS:2202.

9.216.1 35 mm thick including 4 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. sqm

9.216.2 30 mm thick including 3 nos. 100 mm long, ISI marked heavy weight (2.5mm thick) Stainless Steel butt hinges with necessary screws. sqm

9.216.3 25mm thick (for cupboard) including 3 nos. 75 mm long, ISI marked heavy weight (2.5mm thick) nickel plated bright finished M.S. piano hinges with necessary screws. sqm

428 0.000 Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides,made from rigid foam sheets (Single extruded) having density 600 Kg/cum and the exposed edges sealed with PVC edge beading of same shade and colour. The frame shall be fire retardent with necessary screw holding capacity. Frame shall be fixed to wall using Expendable Fastne with necesary stainless steel screws, all complete as per direction of Engineer-in-charge. metre

429 0.999 Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 Kg/cum and laminated on both side by laminate Sheet/PVC foil lamination. The exposed edges shall be sealed with PVC edge beading of same shade and colour. The shutter shall be fire retardent having necessary screw holding capacity.Shutter shall be fixed to frame using approved hinges with necessary stainless steel screws, all complete as per direction of Engineer-in-charge sqm

430 0.999 Fire resistant Providing and fixing fire resistant door door frame (2 hr fire rating) frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet (Zink coating not less than 120gm/m2) suitable for mounting 120 min fire Rated Glazed Door Shutters. The frame shall be filled with Mineral wool insulation provision of GI. Anchor fasters 14 nos (5 each on vertical style & 4 on horizontal style of size M10 x 80) suitable for fixing in the opening along with factory made Template for ss Ball Bearing Hinges of size 100x89x3 mm for fixing of fire rated glazer shutter. The frame shall be finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per the direction of Engineer-in-charge.(Coast of ss ball beating hinges is excluded). metre

431 0.000 Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with u clip, EPDM rubber / neoprene gasket complete.

9.220.1 S.S. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. sqm

432 0.000 Providing and fixing non load bearing fixed frame for fire resistant glazed Partition for 120 minutes Fire Rating, made out to a profile of dimension 60mm x 70 mm of 1.6 mm thick galvanised steel sheet as per test evidence suitable for fixing fire rated glass for 120 minutes of both integrity & radiation control (EW120) & minimum 20 minutes of insulation (EI20).The profile has to be fixed to the supporting construction by means of anchor fasteners of size M10 x 80, every 150 mm from the edges and every 500 mm (approx) c/c. Linear measurement of frame shall be measured for payment. The frame shall be filled with mineral wool insulation of density min 96kg/ m³. and finished with a approved fire resistant primer or Powder coating of not less than 30 micron in desired shade as per NBC 2016, IS 16231 (Part 3):2016 and directions of Engineer - in- charge. metre

433 0.999 Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm sqm

434 0.000 Providing and fixing of ISI marked Un- insulated fire rated GI Sheet doors conforming to FD 120 classification of IS 3614 :2021 with fire rating of 120 minutes integrity. The factory manufactured door frame and shutter assembly shall be made out of minimum 1.20 mm thick GI Sheet with minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns.The door should carry a minimum 500 Hrs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021. The Door frame shall be single rebate grooved profile of size minimum 125mm x 55mm made out of 1.50mm (18gauge) minimum thick galvanized steel sheet. Frames shall be butt / mitred joint and field assembled with bolting system. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip of size 10x4mm. All provisions should be mortised & provided with necessary inbuilt reinforcement to receive appropriate hardware. Frames should be provided with back plate bracket for anchor fastener with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves (Payable in extra item) for installation of frame in finished plastered masonry wall opening. sqm

Door leaf should be minimum 60mm thick fully flush double skin door. Door leaf must be manufactured from 1.2mm (18gauge) thick galvanised steel sheet. The infill material shall be proprietary insulation material. All doors shall be factory prepared for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size 100x89x3 mm along with all suitable hardware). Vision lite size 185 *285 or 300x400 mm (max area 0.12sqm) wherever applicable should be provided with single layered clear fire rated glass panes as per guidelines laid down under IS 3614 2021 with a clipon arrangement. The glass will be provided with fire rated ceramic tape of min. 2 mm thickness with min. 15mm width all-around on either face.

435 0.000 Providing and fixing of Fully Insulated Non Metallic Wooden doors as per IS 3614:2021, for 120 min integrity & 120 min insulation. The door is made out of thoroughly seasoned hard wood. The moisture content of any material used in the construction of wooden composite fire door sets comprises of both frame and shutter shall not be more than 15% approx. in accordance with IS 287. The fire door must have earlier test evidence as per IS/ISO 3008-1. It must have successfully tested from CBRI Roorkee/ NABL accrediated lab. Door and frame shall be finished with fire retardent primer FR880. All accressesories like hardware, fire seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021. Every door must carry a label confirming to type of door & its fire rating. Door frame shall be Single rebate profile of section 120 x 60 mm made out of Hard wood - Red meranti / Ivory Coast (2nd class ) or equivalent having density of 550-600 kg/m3 approx. with factory made groove of sqm

suitable size so as to accomodate intumuscent Fire seal of size 20x4mm . An EPDM seal also to be provided in the frame to check spread of smoke. The frame must be primed with Fire retardant primer FR880. The frame to be fixed to fire exit opening with minimum 10 nos. 10 mm dia and minimum 120 mm long HDG (hot dip galavanized) headed screws with polyamide sleeves. Wooden shutter must be of minimum 50 mm of thickness finished with commercial ply on both faces. If required, the Commercial ply may be replaced with teak ply or may be pasted with 1mm thick Laminate on both faces in desired regular SF grade . The composite thickness of the core insulation will be 37mm consists of minimum 10mm thick Calcium Silicate boards and treated wool Insulation material. The calcium silicate board must have Density not more than 90kg/m3 , having thermal conductivity 0.15W/mK . The shutter should be provided with heat activated intumescent fire seal strip of size 20mm x 4 mm mounted in the suitable grooves all three sides except bottom provided on Exposed OR concealed wooden lipping .The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges along with all suitable hardware.Vision lite size 200x300 mm or 150 x 400mm(max area 0.06sqm) wherever applicable should be provided with single layered clear fire rated glass panes as per guidelines laid down under IS 3614 : 2021. Every Glass pane must carry a permanent marking of its glass manufacturer.

436 0.999 Supply and installation of termite proof, moisture/fire resistant 8mm thick cement bonded particle board confirming to IS: 14276: 1995 in wall panel on structure to form wall/partition wall on external face of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 125 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27mm and 37mm, at 1200 mm centre tocentre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre fixed the self- drilling/tapping screws/fasteners of approved make. as per the directions of Engineer-in-Charge. sqm

437 0.000 Providing and fixing 2 Hrs fire rated acoustic wooden Door of approved make, the door and whole system and criteria shall be comply with IS: 3614 – 2021, also the door shall be acoustic suitable to achieve minimum 35db sound reducing properties, the system shall comprising of door frame, shutter with hardware and other accessories & ancillary material as per approved manufacturer specification, as given in description/technical specification and as directed Engineer-In-Charge. Door Frame: The grooved Frames for Fire resistant door shall be Hardwood (Red merandi), densified and pressure treated with fire retardant chemicals in vacuum impregnation vessel as per IS: 401 and kiln seasoned to moisture level, the moisture content of any material used in the construction of wooden fire rated door, shall not be more than 15 percent, in accordance with IS 287. Wood dry density shall be above 450kgs/cum, The size of frame shall be min. 140 X 90 mm or as per approved manufacturer, with approved intumescent strip of size 20mmx4mm or as approved manufacturer to be concealed in the groove of the Frame for fire and smoke sealing, etc. Frame rebate shall be as per manufacturer standard, the frame to be fixed with anchor fastener / dash fasteners or as per approved manufacturer and as approved by EIC. Complete all as per direction of Engineer in Charge.Shutter: The thickness of shutter shall be 77-85mm (ASBESTOS sqm

FREE) with commercial ply on both faces. Acoustic Door Shutter shall be complying with fire performance - FD 120 as per IS: 3614-2021. The frame work to make shutter shall be hardwood made (Red merandi) , densified and pressure treated with fire retardant chemicals in vacuum impregnation vessel as per IS:401 and seasoned to moisture level, the moisture content of any material used in the construction of wooden fire rated door, shall not be more than 15 percent, in accordance with IS 287. Wood dry density shall be above 450kgs/cum, The shutter system shall be comprising of 2 x 12 mm thick noncombustible Calcium Silicate boards, approved in filled material with appropriate density as per IS 3614, other approved infill material as acoustic insulation filler, interlayer Rubber sheet, Fire retardant or approved plywood, internally lipped with hardwood beading and all around shutter etc. shall be as approved by EIC and as per approved manufacturer. The frame work, lipping shall be fire retardant primer/paint finish. The Intumescent seals shall 20 mm x 4 mm, the seal affixed on periphery for fire and smoke sealing in the slit on all edges of shutter except bottom. Rebate shall be as per manufacturer standard, The shall be finished with 1 mm thick approved laminate on both side, All complete as per approved manufacturer standard and as directed by EIC.

438 0.000 Supplying & Installation of Non-Woven 100% Polyester Fibre Acoustic wall Panels made from polyester short fibre. It is prepared by needle punching on multi folded polyester fabric sheets is lightweight and flexible along with excellent tension/compression stiffness. The panel can be easily cut into any desired shape pattern and V-Grove pattern (arranged by carding process). The final material consists of a three-dimensional network structure with breathable open cells. fixed with Rubber adhesive.Physical Properties sqm

Physical Properties 1. Eco-friendly 2. 100% recyclable 3. Moisture proof,Humidity Resistance 4. Flammability tested as per IS 11871 A 5. Thickness 10 mm 6. NRC: High Performance 0.60 to 0.90 7. Density 180-200kg/m3

439 0.999 Providing & Fixing PVC ceiling system profile panel with click system interlock panel size 4000mmx340mmx1mm resistance to weather perfect finish in wood grain & solid colour maintenance free Resistance to weather truly anti bacterial. with edge profile J-trim on periphery & center profile T-trim in panel joint Complete System to be fixed on G.I.framework of ceiling section at 450 mm distance with enter section suspended byroof by G.I. angle hanger in proper line & level etc complete sqm

PRODUCT SPECIFICATIONS: Meets or exceeds the standard specification of (ASTM D-4477) and its referenced documents.Impact resistance: No deformation observed. (Tested at 50 LBS)Tensile strength, MPa: >37.0 Tensile modulus, MPa: >2000 Surface distortion: None at 120F Squareness: <1/8” of square Length: Within ¼” of specification Lock control: Complies Color Change: <2 grayscales (16 hrs under 1200W/m2 UV radiation at 50 degrees)

440 0.999 Providing & Fixing Fabric Acoustic Wall Paneling System of size 1200mm.maximum in width & Length as required as per site Condition with 25mm thick stretch half / full wrap rigid vinyl tracks to be fix on existing surface with PVC insert and screws as required pattern in panel as Per required module. 25mm thick acoustic rockwool pad of 100kg density Fire Class A-1 as per EN 13501, NRC <0.70 to be fill in panel fixed by rubber adhesive. Approved fabric to be grip in stretch track by tucking tools to make panel in proper line and level with wrinkle free finish. The stretch track create V groove / Butt joint in each panel. Completeas per satisfaction by Engineer in charge. Sqm

441 0.000 Providing & Fixing Laminated wood finish 19 mm thick Acoustical Louvers wall panel system made from 17mm thick & 2440mm Length. MDF Perforated grooved Panel with 2-4mm thick grooved & 10-13mm thick Pitch. with 2mm thick backing of Polyesterfibre FR grade Acoustical Felt Panel to be fixed with Tongue and groove arrangement fixed on aluminum channel at 750mm distance perpendicular to panel with G.I. clips. Aluminum channel to be fix on G.I. Section of size 45mmx12mmx0.90 mm thick intermediate channel. 50 mm thick & 48 kg density Rockwool Fire class A-1 as per EN13501 NRC 0.88 to be fill in air gap the total acoustical paneling system finished in proper line & level. as per satisfaction by Engineer in charge. mm thick intermediate channel. 50 mm thick & 48 kg density Rockwool Fire class A-1 as per EN13501 NRC 0.88 to be fill in air gap the total acoustical paneling system finished in proper line & level. as per satisfaction by Engineer in charge. Sqm

442 0.999 Providing and fixing 18 mm thick wall paneling with commercial ply having one side veneer 4mm thick (ISI marked IS : 14842), including PU Polish including cost of required Cut-Outs, screw, priming coat, Scaffolding for all heights. complete as per direction of Engineer-in-Charge. This item shall be executed only after the prior approval of Chief engineer. Sqm

443 0.000 Providing and fixing 24 mm (18mm + 6 mm) thick commercial ply (ISI marked IS: 14842) wall paneling, having 6mm grove, over 6mm board @ 100 mm Distance on wall paneling, finished with Deco Polish as per Architectural drawing complete with necessary screws, complete as per site requirement and direction of engineer-in-charge. This item shall be executed only after the prior approval of Chief engineer. Sqm

444 0.000 Providing and fixing Door paneling 18mm thick commercial ply including 12mm commercial ply for Rebate with one side veneer 4mm thick (ISI marked IS : 14842), with PU Polish complete with necessary screws as per Architectural drawing complete with necessary screws, complete as per site requirement and direction of engineer-in- charge. This item shall be executed only after the prior approval of Chief engineer. Sqm

445 0.999 Providing and fixing wall paneling 18mm thick commercial ply with Deco Polish including cost of required Cut-Outs, screw, priming coat, Scaffolding for all heights. complete as per direction of Engineer-in- Charge.This item shall be executed only after the prior approval of Chief engineer. Sqm

446 0.000 Providing and fixing 50mm X 25 mm rafter with deco polish Rmts

447 0.000 Providing and fixing 75mm X 35mm mdf rafter with 4mm thick veneer and P.U. Polish. Rmts

448 0.999 Providing and fixing 50mm X 25 mm rafter with 4mm thick veneer and PU polish. Rmts

449 0.000 Providing and fixing 65 mm Special design charcoal Moulding. This item shall be executed only after the prior approval of Chief engineer. Rmts

450 0.000 Providing and fixing 38 mm Special design charcoal Moulding. This item shall be executed only after the prior approval of Chief engineer. Rmts

451 0.999 Providing and fixing 22 mm Special design charcoal Moulding. This item shall be executed only after the prior approval of Chief engineer. Rmts

452 0.999 Providing and fixing ISI marked Premium quality Antique Brass tower bolt (Barrel type) with necessary screws etc. complete. All complete as per direction by engineer in charge. This item shall be executed only after the prior approval of Chief engineer.

450 mm long dia 10mm each

453 0.000 Providing and fixing Premium quality Antique Brass sliding door bolts, ISI marked to required colour or shade, with nuts and screws etc. complete All complete as per direction by engineer in charge. This item shall be executed only after the prior approval of Chief engineer.

400 mm long dia 16mm each

454 0.999 Providing and fixing Premium quality Antique Brass handles with necessary screws etc. All complete as per direction by engineer in charge. This item shall be executed only after the prior approval of Chief engineer.

560 mm long dia 25mm handle each

456 0.999 Providing and fixing Premium quality Antique Brass hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight 150 K.G and door width up to 700 mm), with necessary accessories and screws etc. All complete as per direction by engineer in charge. This item shall be executed only after the prior approval of Chief engineer. each

457 0.000 Providing and fixing Premium quality Antique Brass 125 mm mortise latch with one tri bolt with three key pier and a pair of lever handles of approved quality with necessary screws etc. complete. This item shall be executed only after the prior approval of Chief engineer. each

458 0.000 Providing and fixing Premium quality Satin finished 125 mm mortise latch with one dead tri bolt and a pair of lever handles of approved quality with necessary screws etc. complete. This item shall be executed only after the prior approval of Chief engineer. each

459 0.999 GI metal door having wooden finish through sublimation printing with powder coating-providing and fixing of metal door with outer frame. Frame Size 99x59 mm suitable section for door made out from pressed formed GPSP sheet of thickness 1.2 Confirming to IS277. With honey necessary cut-outs of locks and handle etc. 42mm thick Sandwich panel door made from 0.8 mm thick GPSP Sheet duly filed with honeycomb paper core 40/12 for sound absorbing and provide more strength to door shutters and fixing with necessary stainless steel ball bearing hinges. The complete shutter & Frame (inside & outside) shall be wooden finish through sublimation printing with powder coating outer frame will be grouted on wall with Anchor fastener of suitable size and quantity as per direction of engineer-in-charge. SQM

460 0.000 Providing and fixing commercial ply conforming to IS: 1328 BWR type of approved brand for frame work of boxes, shelves, racks, Amirah, cupboard and drawer etc. including necessary nails, screws etc. Complete as per direction of Engineer-in-charge.

9 mm thick BWP grade commercial plywood Sqm

12 mm thick BWP grade commercial plywood Sqm

18 mm thick BWP grade commercial plywood Sqm

25 mm thick BWP grade commercial plywood Sqm

461 0.000 Providing and fixing Stainless steel tubular H handle bar (Grade 304) with SS screws etc .complete set as per direction of Engineer-in-Charge.

25 mm outer dia & 300 mm long Each Set

32 mm outer dia & 450 mm long Each Set

32 mm outer dia & 600 mm long Each Set

462 0.999 Add Extra for Providing and Fixing, UPVC factory made, coloured / other than white colour casement/sliding window and door (for item no. 9.187, 9.194, 9.195,9.196, 9.197, 9.198, 9.199) 30% of Respective item

463 0.999 Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with u clip, EPDM rubber / neoprene gasket complete.

9.258.1 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. sqm 1040

464 0.9 Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. kg

465 0.9 Structural steel work using M.S. flats, angles, channels I-section, H-section etc. riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. kg

466 0.0 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rail of T-iron 40x40x6mm sqm

with 40mm dia steel pulleys complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. Rate includes recess cutting in floor and making good the same wherever required.

467 0.0 Providing and fixing 1mm thick M.S. sheet sliding-shutters with frame and diagonal braces of 40x40x6mm angle iron, 3mm M.S.gusset plates at the junction and corners 25mm dia pulley,40x40x6mm angle and T-iron guide at the top and bottom respectively including applying a priming coat of approved steel primer. sqm

468 0.0 Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x5mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.

10\.1\.1;@ Using M.S. angels 40x40x6mm for diagonal braces sqm

10\.2\.2;@ Using flats 30x6mm for diagonal braces and central cross piece. sqm

469 0.9 Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to I.S. 4454- part-1 and M.S. top cover of required thickness for rolling shutters.

10\.1\.1;@ 80x1.25mm M.S. laths with 1.25 mm thick top cover. sqm

10\.2\.2;@ 80x1.20 mm M.S. laths with 1.20 mm thick top cover. sqm

10\.3\.3;@ 80x0.90 mm M.S. laths with 0.90 mm thick top cover. sqm

470 0.9 Extra for providing suitable mechanical device chain and crank operation for operating rolling shutters.

10\.1\.1;@ Exceeding 10.00 sqm and upto 16.80 sqm in the area. sqm

10\.2\.2;@ Exceeding 16.80 sqm in area. sqm

471 0.0 Extra for providing grilled rolling shutters manufactured out of 8 mm dia. M.S. bar instead of laths as per design approved by Engineer-in-Charge. (Area of grill to be measured). sqm

472 0.0 Providing and fixing ball bearing for rolling shutters. each

473 Providing and fixing factory made ISI marked glazed steel doors, windows and ventilators side /top /centre hung with beading and Z-section all members such as F7D, F4B, K11 B and K12 B and other tubular section member etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design (sectional weight of only steel members shall be measured for payment).

10\.01\.1;@ Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). kg

10\.02\.2;@ Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). kg

10\.03\.3;@ Extra for providing and fixing steel beading of size 10x10x1.6mm (box type) approved shape and section with screws instead of glazing clips and metal sash putty in steel doors, windows, ventilators and composite units. meter

474 Providing and fixing L-iron or T-iron frames for doors, windows and ventilators of mild steel L-section or T-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer.

10\.02\.2;@ Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). kg

475 Providing and fixing pressed steel door frames made of 1.6 mm thick steel profile conforming to IS: 4351 manufactured from commercial mild steel sheet including hinges, jamb, lock jamb, M.S. pressed butt hinges, with mortar guards, lock strike-plate and shock absorbers as specified filling the frame with Cement Concrete 1:3:6 at site before fixing (cost of concrete to be paid separately) fixing with adjustable lugs (200 mm long & 1.0 mm thick) and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in- charge:

10\.01\.1;@ Profile B of 1.60mm thick single rebate of size 80mmx50mm

10.12.1.1 Fixing with adjustable lugs with split end tail to each jamb. meter

10.12.1.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter

10\.02\.2;@ Profile C of 1.60mm thick single rebate of size 100mmx50mm

10.12.2.1 Fixing with adjustable lugs with split end tail to each jamb. meter

10.12.2.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter

10\.03\.3;@ Profile E of 1.60mm thick double rebate of size 115mmx50mm

10.12.3.1 Fixing with adjustable lugs with split end tail to each jamb. meter

10.12.3.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter

10\.04\.4;@ Profile B of 1.25mm thick single rebate of size 80mmx50mm

10.12.4.1 Fixing with adjustable lugs with split end tail to each jamb. meter

10.12.4.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter

10\.05\.5;@ Profile C of 1.25mm thick single rebate of size 100mmx50mm

10.12.5.1 Fixing with adjustable lugs with split end tail to each jamb. meter

10.12.5.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter

10\.06\.6;@ Profile E of 1.25mm thick double rebate of size 115mmx50mm

10.12.6.1 Fixing with adjustable lugs with split end tail to each jamb. meter

10.12.6.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). meter

476 Providing and fixing M.S. Tubular frames and shutters or frames only or shutters only for doors, windows, ventilators and cupboard with any sections, made of 1.60 mm or 1.25 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size as per drawing, including fixing of necessary butt hinges, stays and screws and applying a priming coat of approved steel primer excluding cost of all fittings such as handles, tower bolts, sliding door bolts, latches etc. and panels.

10.13.1 Fixing with 15x3 mm lugs 10 cm. long embedded in cement concrete block 15x10x10 cm of Cement Concrete 1:3:6 (1 Cement : 3 sand : 6 graded stone aggregate 20 mm nominal size). kg

10.13.2 Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately). kg

477 Steel work in built up M.S. tubular section (round, square or rectangular hollow tubes etc.) trusses/frame work etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

10.14.1 Hot finished welded type tubes kg

10.14.2 Hot finished seamless type tubes kg

10.14.3 Electric resistance or induction butt welded tubes. kg

478 10.15 Design, supply, fabrication, taransportion and erection of structural steel/mild steel built-up sections for steel building in column, rafter, truss, floor joist, wind bracings, tie beam, foundation bolts, fasteners etc. Including two coats of Epoxy paint and one coat of primer. These structural steel/built-up sections shall be manufactured using advanced CNC Plasma/Oxy Acetylene cutter and H Beam Welding line. Welding shall be in full depth on both sides of the plate adopting relevant I.S Code. kg

479 10.16 Providing and fixing M.S. fan clamp type I or II of 16mm dia M.S. bar bent to shape with hooked ends in R.C.C. slabs, beams during laying including painting the exposed portion of loop, all as per standard design complete. each

480 Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp of internal dia 140mm, 73mm height, top lid of 1.5mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3mm dia. round headed screws, one lock at the corners. Clamp shall be made of 16mm dia M.S. bar bent to shape as per standard drawing. each

481 Providing and fixing mild steel round holding down bolts with nuts and washer plates complete. kg

482 Providing and fixing bolts including nuts and washers complete. kg

483 Providing and fixing M.S. rivets of sizes in position. kg

484 Welding by gas or electric plant including transportation of plant at site etc. complete. cm

485 Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.

10.22.1 In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete. kg

10.22.2 In gratings,frames, guard bar, ladder,railings, brackets,gates and similar works. kg

486 Providing and fixing hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying a priming coat of approved steel primer.

10.23.1 M.S. tube. kg

10.23.2 E.R.W. tubes. kg

487 Providing and fixing carbon steel galvanised (minimum coating 5 micron) dash fastener of 10 mm dia double threaded 6.8 grade (yield strength 480 N/mm2), counter sunk head, comprising of 10 mm dia polyamide PA 6 grade sleeve, including drilling of hole in frame, concrete/ masonry, etc. as per direction of Engineer-in-charge.

10.24.1 10x60 mm each

10.24.2 10x80 mm each

10.24.3 10x120 mm each

10.24.4 10x140 mm each

10.24.5 10x160mm each

488 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. (For payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) kg

489 Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S. Flat 15x3mm and nuts and bolts complete.

10.26.1 Galvanised M.S. Wire gauze with 0.63mm dia wire and 1.4 mm aperture on both sides sqm

10.26.2 Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. sqm

490 Providing and fixing glass panes/ steel sheet/ fibre sheet with putty and glazing clips in steel doors, windows, clerestory windows all complete.

10.27.1 With 4.0 mm thick glass panes sqm

10.27.2 With 5.50 mm thick glass panes sqm

10.27.3 With 1mm thick mild steel sheet i/c 10x10x1.6mm box beading. sqm

10.27.4 With 2mm thick fibre reinforced polymer (FRP) sheet i/c 10x10x1.6mm box beading. sqm

10.27.5 With 1mm thick Galvanised steel sheet i/c 10x10x1.6mm box beading. sqm

10.27.6 With 4mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. sqm

10.27.7 With 6mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. sqm

10.27.8 With 8mm thick cement fibre board conforming to IS 14862:2000 of category type A grade i/c 10x10x1.6mm box beading. sqm

491 Add extra for providing and fixing froasted glass instead of float glass.

10.28.1 With 4.0 mm thick glass panes. sqm

10.28.2 With 5.5 mm thick glass panes. sqm

492 Supplying at site:

10.29.1 R.C.C. Standards post/ struts/rails/ poles of mix 1:1.5:3 (1 cement : 1.5 sand : 3 graded stone aggregate 12.5 mm nominal size) with wooden plugs or 6mm bar nibs wherever required as per direction of Engineer-in-charge including fixing (cost of earth works in excavation, concrete works in foundation to be paid separately). cum

10.29.2 Angle iron post and strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (cost of earth work in excavation and concrete work in foundation to be paid separately) kg

10.29.3 Supplying at site -Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming painting to be paid for separately). kg

493 Supplying and fixing turn buckles and straining bolts for barbed wire fencing. (Labour rate only). each set

494 Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) with GI barbed wire. metre

495 Fencing with barbed G.I. wire angle iron post placed fitted to at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately):- Payment to be made per metre cost of total length of barbed wire used. metre

496 Fixing Welded steel wire fabric fencing with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, provided with welded steel wire fabric fixed between the posts fitted and fixed with G.I. staples on wooden plugs or tied to 6 mm bar nibs with G.I. binding wire (cost of posts, painting, earth work in excavation and cement concrete to be paid for separately). (Labour rate only) . sqm

Providing and fixing G.I. or PVC coated G.I.wire chain link fabric fencing of required width and mesh size including strengthening with 2mm dia wire or nuts, bolts and washers as required complete with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10

498 (1cement :5 sand :10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer- in-charge. (Cost of post, painting earthwork & c.c. to be paid separately)

10.34.1 Made of G.I. wire. kg

10.34.2 Made of G.I. wire, PVC coated to achieve outer dia. not less than 5mm in required colour and shade. kg

499 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25x25 mm made of G.I. wire of dia. 3mm including strengthening with 2mm dia. wire or nuts, bolts and washers as required complete, with posts of specified material and of standard design placed and embedded in cement concrete blocks 45x45x60cm of mix 1:5:10 (1cement :5 sand : 10 graded stone aggregate 40mm nominal size) every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and struts embedded in cement concrete blocks 70x45x50cm of the same mix, as per the direction of Engineer-in- Charge. (cost of post painting earth work & C.C. to be paid separately) sqm

500 Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4m or 3.00m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5 mm thick) wire of high tensile strength metre

of 165 kg/ sq mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately).

501 Providing and fixing of ISI marked insulated fire rated GI Sheet doors conforming to FD 120-PI classification of IS 3614:2021 with fire rating of 120 minutes integrity and 30 minutes insulation. The factory manufactured door frame and shutter assembly shall be made out of minimum 120 GSM coating as per IS: 277. Door and frame should be finished with powder coating in standard RAL shade finish having DFT of minimum 30 microns. The door should carry a minimum 500 Hrs of salt spray test. All accessories like hardware, vision panel, fire & smoke seal etc to be supplied by Fire door manufacturer only as per the guidelines laid down in IS 3614:2021.Every door must carry a label confirming to type of door & its fire rating. The Door frame shall be single rebate grooved profile of size minimum 125 mm x 75mm made out of 1.50mm minimum thick galvanized steel sheet. Frames shall be butt / mitered joint and field assembled with bolting system. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip. Frames to have inbuilt grooved to accommodate Intumescent fire seal strip of size 10x4mm. All provisions should be mortised & provided with necessary inbuilt reinforcement to receive appropriate hardware. Frames should be provided with back plate bracket for anchor fastner with 8-10 mm dia and minimum 80 mm long HDG fasteners, with Polyamide sleeves (Payable in extra item) for installation of frame in finished plastered masonary wall opening. sqm

factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. The edges should be interlocked with a bending radius of 1.4mm. For double leaf doors integrated astragals has to be provided on the meeting stile for both active and inactive leaf. The shutters shall be mounted to the frame with SS 304 grade ball bearing type hinges of size 100x 89x3 mm along with all suitable hardware (Payable in extra item). Vision lite size 185x285 (max area up to 0.06sqm) wherever applicable should be provided with single layered clear fire rated glass panes as per guidelines laid down under IS 3614 : 2021 vide clause no. 7.2.7 table no. 2 with a clip on arrangement. The glass will be provided with fire rated ceramic tape of min. 2 mm thickness with min. 15mm width al around on either face. Every Glass pane must carry a permanent marking of its glass manufacturer.

502 Providing and fixing of factory make air tight casement windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated/ powder coated (base steel as per IS 513 of “D" quality, galvanized as per IS 277 with zinc of 120 grams/sqm) outer frame section 46x52x0.58 mm, shutter section 46x46x0.58mm, mullion section 46x70x0.58mm, beading section 18x25x0.58 mm, windows panelled without glazing (glazing shall be paid separately as per SOR rate) with EPDM (Ethyl Propylene Diamine Monomer) gasket and the sections cut to length mitre joined with corner bracket centre mullions fixed using mullion cap and with handle made of powder coating high grade aluminum with nylon receiver, corner brackets made of CRCA (Cold Rolled Close Annealed) with Zinc Phosphate, Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.

10.38.1 Openable window sqm

10.38.2 Fixed windows sqm

503 Providing and fixing of factory make single rebate openable/fixed windows made of roll formed galvanized pre- pained steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick) heavy duty pivot hinges per shutter and window fitted without glazing including 10mm square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete.Mullion caps made of glass filled nylon, frames fixed to the concrete /masonry wall by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.

10.39.1 Openable single rebate window sqm

10.39.2 Fixed single rebate window sqm

504 Providing and fixing of factory make double rebate windows made of roll formed galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self- expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150mm c/c (pitch) etc. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in- charge complete..

10.40.1 Openable double rebate window sqm

10.40.2 Fixed double rebate window sqm

505 Providing and fixing of factory make fixed louvers fabricated from roll formed sections made of galvanized pre-painted steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, colour coated/powder coated Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and sqm

506 direction of Engineer-in- charge complete. (glazing shall be paid separately as per SOR rate)

507 Providing and fixing of factory make pre painted steel sliding window 2 track-2 panel sliding window fabricated from roll formed sections made of galvanized steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. sqm

508 Providing and fixing pre painted steel sliding window 3 fabricated from Roll formed sections made of galvanized Steel with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns The above frames should be fixed to the concrete/masonry walls by means of self-expanding screws. Including filling the gap upto 5 mm depth and 5 mm width in between steel frame and adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete. sqm

509 0.9 40 mm thick Cement concrete flooring 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate) 20mm nominal size stone aggregate in panels finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.(Area of panel not to exceed 2.0 sqm) sqm

510 0.9 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. sqm

511 0.0 62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50kg of cement or as per manufactures specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. sqm

512 0.0 Cement plaster skirting 18 mm thick (upto 30 cm height) with cement mortar 1:3 (1 cement: 3 sand) finished with a floating coat of neat cement. sqm

513 0.0 Cement concrete pavement with Cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) including finishing complete. cum

514 0.9 Making chequers of approved pattern on cement concrete floors, steps, landing, pavements etc. sqm

515 0.9 40 mm thick marble chips flooring rubbed and polished to granolithic finish, under layer 34 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 6mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 1mm to 4mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm)

11\.1\.1;@ Dark shade pigment with ordinary cement. sqm

11\.2\.2;@ Light shade pigment with white cement. sqm

11\.3\.3;@ Medium shade pigment with 50% white cement and 50% ordinary cement. sqm

11\.4\.4;@ White cement without any pigment. sqm

11\.5\.5;@ Light shade pigment with ordinary cement. sqm

11\.6\.6;@ Ordinary cement without any pigment. sqm

516 0.0 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 31mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 9mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from 4mm to 7mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder : 7 marble chips) by volume including cement slurry etc. complete. (Area of panel not to exceed 2.0 sqm)

11\.1\.1;@ Dark shade pigment with Ordinary cement. sqm

11\.2\.2;@ Light shade pigment with white cement. sqm

11\.3\.3;@ Medium shade pigment with 50% white cement and 50% ordinary cement. sqm

11\.4\.4;@ White cement without any pigment. sqm

11\.5\.5;@ Light shade pigment with ordinary cement. sqm

11\.6\.6;@ Ordinary cement without any pigment. sqm

517 0.0 40 mm thick marble chips flooring, rubbed and polished to granolithic finish, under layer 28 mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5mm nominal size) and top layer 12mm

thick with white, black, chocolate, grey yellow or green marble chips of sizes from 7mm to 10mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 2:3 (2 cement marble powder mix : 3 marble chips) by volume including cement slurry etc. complete : (Area of panel not to exceed 2.0 sqm)

11\.1\.1;@ Dark shade pigment with ordinary cement. sqm

11\.2\.2;@ Light shade pigment with white cement. sqm

11\.3\.3;@ Medium shade pigment with 50% white cement and 50% ordinary cement. sqm

11\.4\.4;@ White cement without any pigment. sqm

11\.5\.5;@ Light shade pigment with ordinary cement. sqm

11\.6\.6;@ Ordinary cement without any pigment. sqm

518 Marble chips skirting (upto 30 cm height) 18 mm thick with under layer 12 mm thick in cement plaster 1:3 (1 cement : 3 sand) : rubbed and polished to granolithic finish, top layer 6 mm thick with white, black, chocolate, grey, yellow or green marble chips of sizes from smallest to 4 mm nominal size laid in cement marble powder mix 3:1 (3 cement : 1 marble powder) by weight in proportion of 4:7 (4 cement marble powder mix :7 marble chips) by volume :

11\.01\.1;@ Dark shade pigment with ordinary cement. sqm

11\.02\.2;@ Light shade pigment with white cement. sqm

11\.03\.3;@ Medium shade pigment with 50% white cement and 50% ordinary cement. sqm

11\.04\.4;@ White cement without any pigment. sqm

11\.05\.5;@ Light shade pigment with ordinary cement. sqm

11\.06\.6;@ Ordinary cement without any pigment. sqm

519 Extra for laying terrazo flooring on staircase treads not exceeding 30 cm in width including cost of forming, nosing etc. sqm

520 Providing and fixing glass strips 40 mm wide and 4 mm thick in joints of terrazo/ cement concrete floors. metre

521 18 mm thick crazy marble stone white, black or as specified marble stone flooring, including filling the gaps with light shade pigment with white cement marble powder mixture (3 parts of white cement : 1 part of marble powder) by weight in proportion of 4:7 (4 cement marble powder mix : 7 white, black or white and black marble chips of sizes from sqm

1mm to 4mm nominal size by volume), with under layer 25mm thick cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone aggregate 12.5 mm nominal size), including rubbing, polishing and cement slurry etc.complete .

522 Precast terrazo tiles 22mm thick with graded marble chips of size upto12mm, laid in floors, and landings, jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) :

11.14.1 Light shade using white cement. sqm

11.14.2 Medium shade using 50%white cement and 50% ordinary cement. sqm

11.14.3 Dark shade using ordinary cement. sqm

11.14.4 Ordinary cement without any pigment. sqm

523 Extra if terrazo tiles are laid in treads of steps not exceeding 30 cm in width. sqm

524 Precast terrazo tiles 22 mm thick with graded marble chips of sizes upto 12 mm in skirting and risers of steps not exceeding 30 cm in height on 12 mm thick cement plaster 1:3 (1 cement : 3 sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete with tiles of :

11.16.1 Light shade pigment using white cement. sqm

11.16.2 Medium shades pigment using 50% white cement and 50% ordinary cement. sqm

11.16.3 Dark shade pigment using ordinary cement. sqm

11.16.4 Ordinary cement without any pigment. sqm

525 Chequeredterrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete on 20 mm thick bed of cement mortar 1:4 (1 cement :4 sand) :

11.17.1 Light shade pigment using white cement. sqm

11.17.2 Medium shade pigment using 50% white cement, 50% ordinary cement. sqm

11.17.3 Dark shade pigment using ordinary cement. sqm

11.17.4 Ordinary cement without any pigment. sqm

526 Chequered precast cement concrete tiles any finish, any size 22 mm thick IS:13810-1993 ISI mark in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shade of tiles, 15mm thick screed bad in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.

11.18.1 Light shade pigment using white cement. sqm

11.18.2 Medium shade pigment using 50% white cement 50% Grey cement. sqm

11.18.3 Dark shade pigment using ordinary cement. sqm

11.18.4 Ordinary cement without any pigment. sqm

527 Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sandand grey cement slurry, joints treated with white cement mixed with pigment to match colour of stone including rubbing and polishing complete with : (area of slabs over 0.5 sqm)

11.19.1 Makrana white second quality. sqm

11.19.2 Raj Nagar plain. sqm

11.19.3 Agaria White/Morgarh sqm

11.19.4 Katni marble sqm

11.19.5 Black Zebra. sqm

11.19.6 Udaipur / Baroda green marble sqm

11.19.7 Pink plain marble. sqm

11.19.8 Jaisalmer Yellow sqm

528 Marble stone 18 mm thick in riser of step, skirting, dado and pillar laid on 12 mm average thick cement mortar 1:3 (1 cement: 3 sand and laid with white cement slurry) joints treated with white cement mixed with pigment to match the shade of the slab i/c rubbing and polishing complete. (area of slab over0.50sqm.)

11.20.1 Makrana white second quality. sqm

11.20.2 Raj Nagar plain. sqm

11.20.3 Agaria White/Morgarh sqm

11.20.4 Katni marble sqm

11.20.5 Black Zebra. sqm

11.20.6 Udaipur / Baroda green marble sqm

11.20.7 Pink plain marble. sqm

11.20.8 Jaisalmer Yellow sqm

529 Marble work gang saw cut (polished and machine cut) of thickness 18 mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand), including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade (To be secured to the backing by means of cramps, which shall be paid for separately). (Area of slabs over 0.50 sqm.)

11.21.1 Makrana white second quality. sqm

11.21.2 Raj Nagar plain. sqm

11.21.3 Agaria White/Morgarh sqm

11.21.4 Katni marble sqm

11.21.5 Black Zebra. sqm

11.21.6 Udaipur / Baroda green marble sqm

11.21.7 Pink plain marble. sqm

11.21.8 Jaisalmer Yellow sqm

530 Providing and fixing 18mm thick gang saw cut mirror polished (premoulded and prepolished) machine cut for kitchen platforms

,vanity counters, window sills, facias and similar locations of required size of approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish wherever required etc. complete at all levels. Samples approved by Engineer-in- Charge.

11.22.1 Raj Nagar plain/White Marble/Udaipur Green Marble /Zebra black sqm

11.22.2.1 Granite fine grained dark crystal of other colours and various patterns sqm

11.22.2.2 Granite coarse grained light black/ light red/white with crystal of other colours and various patterns Sqm

11.22.2.3 Granite grey/pink/brown with various patterns Sqm

11.22.3 Cuddpah stone sqm

531 Extra for prefinished nosing to treads of steps of marble stone. meter

532 Extra for marble stone flooring in treads of steps and risers using single length upto 2.00 metre. sqm

533 Providing and laying machine cut, mirror polished, Italian Marble stone (18 mm thick Italian Marble stone slab, Perlato, Rosso erona, Fire Red or Dark Emperadore etc.)work in flooring laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry mixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. sqm

534 Providing and fixing machine cut, mirror / eggshell polished , Marble stone work 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc. for wall lining (veneer work) including dado, skirting, risers of steps etc. thick cement mortar 1:3 (1 cement : 3 sand) laid and jointed with white cement slurry @ 3.3 kg/sqm including pointing with white cement slurry admixed with pigment of matching shade, including rubbing, curing, polishing etc. all complete as per Architectural drawings, and as directed by the Engineer-in-Charge. sqm

535 Providing and laying machine cut, mirror polished Italian Marble stone 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadoreetc flooring, in required design (Simple sqm

geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colours, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

536 11.28 Italian marble flooring in required design and patterns

11.28.1 Providing and laying machine cut, mirror polished Italian Marble stone 18 mm thick Italian Marble stone slab,Perlato, Rosso verona, Fire Red or Dark Emperadore etc flooring, in required design (Simple geometrical, abstract etc.) and in patterns in combination with Italian marble stones of different colors, shades and finished surface texture etc., in linear portions of the building, all complete as per the architectural drawings, with18 mm thick stone slab laid over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 sand) laid and jointed with white cement slurry @ 4.4 kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.

11.28.2 Premium high Quality machine, cut, mirror polished, italian marble (minimum compressive strength 1800 psi is compulsory) in required special design and in required special pattern in combination with different varietes italian marble and finished surface texture linear portion of the building all complete as per architectural drawings, with 18 mm thick stone slab with stone slab base side epoxy coating with fibre net and top side epoxy coating for increase strength and laid over 20mm (average) thick base of cement mortar 1:3 (1 cement : 3 sand ) laid and jointed with white cement slurry @ 4.4 Kg/sqm including pointing with white cement slurry admixed with pigment to match the marble shade resin and epoxy after every rubbing coat used epoxy and resin including rubbing, curing and polishing etc.(Italian marble has to be treated with epoxy resins and matching pigments to increase its strength)all complete as

537 Granite work gang saw cut (polished and machine cut) of thickness 18mm for wall lining (veneer work), backing filled with a grout of average 12 mm thick in cement mortar 1:3 (1 cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the backing by means of cramps, which shall be paid for separately).

11.29.1 Area of slab over 0.50 sqm

11.29.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm

11.29.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter sqm

11.29.1.3 Gray/Pink/Brown or equivalent with various patterns sqm

11.29.2 Area of slab upto 0.50 sqm

11.29.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm

11.29.2.2 Coarse grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm

11.29.2.3 Gray/Pink/Brown or equivalent with various patterns sqm

538 Providing and laying gang saw cut 18 mm thick, mirror polished premoulded (wherever required) and pre polished machine cut granite stonework in flooring of required size shape of approved shade, color and texture in flooring laid over 20 mm thick base of cement mortar 1:4 (1 Cement: 4 sand) including grouting the joints with white cement mixed with matching pigments epoxy touch ups etc. complete as per direction of Engineer-in- Charge.

11.30.1 Area of slab over 0.50 sqm

11.30.1.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm

11.30.1.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter sqm

11.30.1.3 Gray/Pink/Brown or equivalent with various patterns sqm

11.30.2 Area of slab upto 0.50 sqm

11.30.2.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm

11.30.2.2 Coarsegrained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm

11.30.2.3 Gray/Pink/Brown or equivalent with various patterns sqm

539 Providing and laying gang saw cut 30 mm thick, mirror polished pre moulded and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in footpath, flooring in road side plazas and similar locations, laid over 20mm thick base of cement mortar 1:4 (1cement: 4 sand) including grouting the joints with white cement mixed with matching pigment, epoxy touch ups etc. complete as per direction of Engineer-in-Charge. (area of slab more than 0.50 sqm)

11.31.1 Fine grained granite dark Black/dark Red/ White or equivalent with self design/ pattern/crystals of other colors of glitter sqm

11.31.2 Coarse grained granite light Black/light Red/ off White or equivalent with self design/ pattern/crystals of other colors of glitter sqm

11.31.3 Gray/Pink/Brown or equivalent with various patterns sqm

540 Deduct for not polishing granite flooring (item no 11.29 & 11.30) sqm

541 Add extra for polishing on granite work

542 11.33 Providing and laying Granite stone flooring in required design and patterns in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry admixed with pigment of matching shade including rubbing, curing and polishing and as directed by the Engineer-in-Charge Granite stone slab Dark Black. Dark Red, White or equivalent sqm

11.33.1 Flamed Finish Granite

11.33.2 Leather Finish Polish sqm

543 Granite stone work 18mm thick of any colour in riser of steps, skirting, dado and pillars laid on 12 mm average thick cement mortar 1:3 (1 cement:3 sand) and jointed with white cement slurry mixed with pigment to match the shade of slab. sqm

544 Providing and fixing 10x10x7.50 cm Granite stone block hand cut andchisel dressed on top, for paving in floors, drains etc. laid over 20mm thick base mortar 1:4 (1cement:4 sand) with joints 10mm wide filled with same mortar mixed with matching pigment including ruled pointing etc. complete as per direction of engineer-in charge. sqm

545 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 sand) 25 mm thick.(Area of slab to be over 0.25 sqm) sqm

546 Deduction for using 20 mm thick slab instead of 25 mm thick slab of kota stone in item no 11.35 sqm

547 Kota stone slabs in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

11.38.1 10-12 mm thick sqm

11.38.2 20 mm thick sqm

548 Kota stone slab (area less than 0.5 sqm) rough chiseled dressed average 40 mm thick flooring for parking and open area of thickness over 20 mm (average) thick base laid over and jointed with grey cement slurry complete with base of cement mortar 1:4 (1 Cement : 4 Sand) sqm

549 Providing edge moulding to 18mm thick marble stone counters, Vanities, window sills etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

11.40.1 Marble work meter

11.40.2 Granite work. meter

550 Extra for fixing marble /granite stone over and above corresponding basic item, in facia and drops of width upto 150 mm with epoxy resin based adhesive including cleaning etc. complete. meter

551 Extra for providing opening of required size and shape for wash basins/ kitchen sink in kitchen platform, vanity counters and similar location in marble/Granite/stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. each

552 Mirror polishing on marble work/Granite work/stone work wherever required to give high gloss finish complete. sqm

553 Fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1cement : 5 sand) with joints finished flush.

11.44.1 Red sand stone sqm

11.44.2 White sand stone sqm

11.44.3 Grey lime stone sqm

11.44.4 Kota stone sqm

554 40 mm thick fine dressed stone flooring over 20 mm (average) thick base of cement mortar 1:5(1cement: 5 sand) including pointing with cement mortar 1:2 (1cement:2 sand) with an admixture of pigment to match the shade of stone.

11.45.1 Red sand stone sqm

11.45.2 White sand stone sqm

555 40 mm thick machine rubbed stone flooring over 20 mm (average) thick base of cement mortar 1:5 (1 cement :5 sand) with joints 3mm thick, side buttered with cement mortar 1:2 (1 cement : 2 sand) mixed with

pigment to match the shade of stone and pointing with same mortar

11.46.1 Red sand stone sqm

11.46.2 White sand stone sqm

556 Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. meter

557 Extra for Kota stone/ sand stone in treads of steps and risers using single length upto 1.05 metre. sqm

558 Providing and laying Ceramic glazed floor tiles 300x300 mm or more (having thickness 6 to 7mm) of 1st quality conforming to IS : 15622 of approved make in any colours and shade laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 sand) including pointing the joints with white cement and matching pigment etc., complete. sqm

559 Providing and fixing Ceramic glazed wall tiles 300x450 mm or more (having thickness 6 to 7 mm) of 1st quality conforming to IS: 15622 of approved make in all Colours& shades, except burgundy, bottle green, black laid on 12mm thick bed of Cement Mortar 1:3 (1 Cement: 3 sand)preprad same day when mortar is still green jointed with grey cement slurry @3.3 kg per sqm including pointing the joints with white cement and matching pigments etc., complete. sqm

560 Providing and laying rectified Glazed Ceramic floor tiles 300x300 mm or more (having thickness 9 to 10mm) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 20mm thick cement mortar 1:4 (1 Cement : 4 sand) including grouting the joints with white cement and matching pigments etc., complete. sqm

561 Providing and laying rectified Glazed Ceramic wall tiles 300x450 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours white, ivory, grey, fume red brown laid on 12 mm thick cement mortar 1:3 (1 Cement : 3 sand) including grouting the joints with white cement and matching pigments etc., complete. sqm

562 Providing and laying Antiskid floor tiles of any sizes, 12 mm thickness with water absorption less than 0.08% and conforming to IS:15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 sand) including grouting the joints with white cement with matching pigments etc., complete. sqm

563 Deduct for not grouting the joints with white cement and matching pigment in the items of fixing of vitrified tiles. sqm

564 Deduct for not using 20mm thick cement mortar 1:4 (1 cement: 4 sand) bedding in laying of floor tiles. sqm

565 Fixing glazed/ Ceramic/Rectified/ Vitrified floor tiles with cement based high polymer modified quick-set tile adhesive (Water based) conforming to IS: 15477, in average 3mm thickness. sqm

566 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having water absorption less than 0.05% and conforming to IS: 15622 of approved make in all colours and shades for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1cement : 4 sand) in all shapes and patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. sqm

567 Providing and fixing Glass mosaic tiles at finished plain wall surface of size 20 mm x 20 mm x 4 mm in all colour, design, fixing in customize design as per direction of Engineer-in- Charge. The glass mosaic tiles to be fixed on the wall surface with the help of approved adhesive applied at the rate of 2.5 kg per sqm and grouting of the same. The rate is inclusive of all operation, material and required pattern approved by Engineer-in-Charge: sqm

568 Providing and laying 500x500x40mm thick Turf paver on 150mm thick sub grade of compacted bed of 20mm nominal size stone aggregate and base course with 50mm thick sand and filling joints with sand including spreading, well ramming, consolidating and finishing smooth etc. all complete as per direction of Engineer-in-charge. sqm

569 Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make and colour using acid and/ or alkali resisting mortar bedding and joints filled with acid and/ or alkali resisting cement as per IS : 4457 complete as per the direction of Engineer-in- Charge.

11.60.1 In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement: 4 sand)Acid and alkali resistant tile. sqm

11.60.2 In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 sand).Acid and alkali resistant tile. sqm

570 8 mm thick.stones Tile work in skirting, risers of steps and dado (upto 2 m height) over 12 mm thick bed of cement mortar 1:3 (1 cement :3 sand) and jointed with grey cement slurry @ 3.3 kg/sqm including pointing in white cement mixed with pigment of matching shade complete.

11.61.1 Marble tiles (polished) Raj Nagar. sqm

11.61.2 Granite tile of any colour /shade sqm

571 Providing and fixing cramps of required size and shape in RCC/ CC /Stone/ Brick masonry backing with cement mortar 1:2 ( 1 cement :2 sand) including drilling necessary hole in stones and embedding the cramp in the hole (fastener to be paid separately).

11.62.1 Gunmetal cramps. kg

11.62.2 Stainless steel cramps. kg

572 Providing and fixing expansion hold fasteners of wedge expansion type on C.C. / R.C.C./ Brick masonry surface backing including

drilling necessary holes and the cost of bolt etc complete.

11.63.1 Fastener with threaded dia 6 mm. each

11.63.2 Fastener with threaded dia 10 mm. each

11.63.3 Fastener with threaded dia 12 mm. each

573 Providing and fixing stone slab table rubbed on both faces edges rounded and polished of size as required and 1.8 cm thick fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth.

11.64.1 White Agaria Marble Stone. sqm

11.64.2 Granite Stone of approved shade. sqm

574 Providing and fixing removable raised/false access flooring with system and its components of approved make for different plenum height with possible height adjustment upto 50 mm, comprising of modular load bearing floor panels supported on G.I. rectangular stinger frame work and and Surface flatness within 0.75mm.The panel is to withstand a Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all complete as per the approved manufacturers specification and as per the direction of Engineer- in-charge. All specification must be printed on the side of the panel to ensure the quality of the product.

11.65.1 300 mm Finished Floor Height (FFH) sqm

11.65.2 450 mm Finished Floor Height (FFH). sqm

575 Providing and laying factory made machine pressed precast cement concrete interlocking paver block of any shape and size conforming to IS:15658- 2006 and ISI marked of 60 mm thickness, M-30 grade with grey cement and pigment all as specified. Made by block making machine with strong vibratory compaction, laid in required colour and pattern over and including 50mm thick compacted bed of stone dust, filling the joints with sand etc. all complete as per the direction of Engineer-in-Charge. sqm

576 Providing Epoxy flooring self leveling type on strong base in desired colour/design as approved by Engineer-in-Charge. Resin for epoxy is to be of floor grade type i/c appropriate hardner and filler material.

with 5 year defect liability period (This item is to be used only for operation theaters in hospitals)

11.67.1 1 mm thick sqm

11.67.2 2 mm thick sqm

11.67.3 3 mm thick sqm

577 Providing and fixing acoustic PVC (Poly Vinyl Flooring) EN (European Standard) over fiberglass mat PVC foam backing (EN 14904), total thickness is 3.25mm (EN 428/EN 427), wear layer is 0.85 mm thick (EN 429), anti-bacterial and anti-fungus surface treatment , chemical resistance test qualified (EN-423)-high resistance, thermal and underfloor heating test qualified (EN12524) - all vinyl sheets must be linked crosswise with a continuous copper strip and finally connected to earth for grounding electrostatic electrical charges. Suitable and slip resistant. Recommended to use in area like Lecturer room, Conference room, Kids area, School, colleges, Residential and all commercial official scope etc. sqm

578 Providing and fixing 2 mm thick heterogeneous PVC (poly vinyl flooring) EN (European Standard) with wear layer is 0.55mm thick of PVC, total weight is 2300 g/m2 approx. PUR (polyurethane reinforced), residual indentation approx.0.05 mm, castor wheel test qualified, dimensional stability ≤0.10%, static electrical charge .The floor finish should termite free at the room perimeter passing over a concealed cove forming and continuing up on the wall upto100mm. Recommended to use in area like Patient rooms , Doctor room Lecturer room, Kids area, School, Colleges, Residential and all commercial official scope etc. sqm

579 Providing and fixing 8mm and above thick laminated (wooden flooring) of AC4 and above grade product of approved made out of core high density fibre board (HDF), surface layer shall be high preasure laminated treated for abrasion, scratch, moisture protection, flame protection U.V resistant, layer of acrylic resin, aluminium oxide or similer layer having above properties, backing under layer on min 2 mm thickness shall provide as sound absorbent and moisture protection layer, The seamless impregenated decorative layer of specified size, design, colour and pettern, all bonded together under high temperature and pressure with eco-friendly. The material shall be applicable warranty formaldehyde free, eco- friendly and fully recyclable (eco-freindly) and matching shed and excluding quantity of skirting and profile. sqm

580 Brick on edge flooring with bricks of class designation 7.5 on a bed of 12 mm cement mortar, 1:6 (1 cement : 6 sand) including filling the joints with same mortar, with common burntclay non modular bricks

11.71.1 100 mm thick sqm

11.71.2 200mm thick sqm

581 Providing and laying factory made chamfered edge Cement Concrete paver blocks of required colour strength, thickness pattern, surface texture (smooth/rough) and size/shape, conforming to 15658-2006 IS marked made by table vibratory method using PU mould, laid in required colour and pattern over 0.30 mm with courtyards, porch with M 15 cement concrete in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer's specifications and direction of Engineer-in-Charge.60 mm thick C.C. paver block of M-35 grade

11.72.1 80 mm thick C.C. paver block of M-35 grade sqm

11.72.2 60 mm thick C.C. paver block of M-35 grade sqm

11.72.3 60 mm thick C.C. paver block of M-30 grade sqm

582 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in- Charge). cum

583 Providing and fixing at or near ground level factory made RCC pavement slab of M-30 grade of size 450x450x50 mm, including reinforcement with 6 mm dia M.S. bars 4 nos on each side(top & bottom), including setting in position in footpath to the required level and line over a bed of 20 mm average thick cement mortar 1:5 (1 cement : 5 sand), having joint thickness not more than 5mm except on curve, including filling of joints with same cement mortar and making grooves etc. complete as per direction of Engineer-in-Charge. sqm

584 Providing and fixing 16mm thick gang saw cut mirror polished premoulded and prepolished machine cut Granite of approved shade, colour and texture of Granite Door frame. in cement mortar 1:3 (1 cement :3 sand) Including rubbing, curing, moulding and polishing edges to give high glossy finish and drilling of hole for fixing stainless steel hings, aldrop, towerboltetc complete at all levels as per instruction of Engineer-in-Charge.

11.75.1 Granite Door frame for 100mm thick wall Thickness. metre

11.75.2 Granite Door frame for 200mm thick wall Thickness. metre

585 Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4 (1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete

11.76.1 Plain ivory light shade : Size 600X600mm thickness 9-10mm sqm

11.76.2 Dark shade (terracotta) : Size 600X600mm thickness 9-10mm sqm

586 Providing and laying vitrified floor tiles (without soluble salt) or printed (with soluble salt) Nano polished (Glossy finish) in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete

11. 77.1 Plain ivory light shade : Size 600X600mm thickness 9-10mm sqm

11. 77.2 Dark shade (terracotta):Size 600X600mm thickness 9-10mm sqm

587 Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, quality/ premium quality in flooring laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete

11. 78.1 In light shade glossy/ rustic /stain finished

11. 78.1.1 Size 600X600 mm thickness 9-10 mm sqm

11. 78.1.2 Size 800X800mm thickness 11-12mm sqm

11. 78.1.3 Size 800X1200 mm thickness 11-12mm sqm

11. 78.2 In dark shade glossy/ rustic /stain finished

11. 78.2.1 (a) Size 600X600 mm thickness 9-10 mm sqm

11. 78.2.2 (b) Size 800X800mm thickness 11-12mm sqm

11. 78.2.3 (c) Size 800X1200 mm thickness 11-12mm sqm

588 Providing and laying vitrified floor tiles Multi/Double charged (Minimum top layer thickness 2.0mm) Neno Polished self design, in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete

11. 79.1 In light shade glossy/ rustic /stain finished

11. 79.1.1 (a) Size 600X600 mm thickness 9-10 mm sqm

11. 79.1.2 (b) Size 800X800mm thickness 11-12mm sqm

11. 79.1.3 (c) Size 800X1200 mm thickness 11-12mm sqm

11. 79.2 In dark shade glossy/rustic/stain finished

11. 79.2.1 (a) Size 600X600 mm thickness 9-10 mm sqm

11. 79.2.2 (b) Size 800X800mm thickness 11-12mm sqm

11. 79.2.3 (c) Size 800X1200 mm thickness 11-12mm sqm

589 Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in flooring laid on 20mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete

11. 80.1 In light colour and shades as ivory, beige blanco, grey etc.

11. 80.1.1 (a) Size 300X300 mm thickness 9-10 mm sqm

11. 80.1.2 (b) Size 600X600mm thickness 9-10mm sqm

11. 80.1.3 (c) Size 600X600 mm thickness 11-12mm (to be used heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) sqm

11. 80.2 In dark colour and shade etc.

11. 80.2.1 (a) Size 300X300 mm thickness 9-10 mm sqm

11. 80.2.2 (b) Size 600X600mm thickness 9-10mm sqm

11. 80.2.3 (c) Size 600X600 mm thickness 11-12mm (to be used in heavy duty indoor areas of non residencial buildings only such as schools, hostels, libraries hospitals, institutions, offices etc.) sqm

590 Providing and laying vitrified floor-tiles Full Body Design Homogenous Body matt/rustic finish in different size with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality in skirting, riser laid on 12mm thick cement mortar 1:4(1cement :4sand) including grouting the joints with white cement and matching pigments etc. complete

11. 81.1 In light colour and shades as ivory, beige blanco, grey etc.

11. 81.1.1 (a) Size 300X300 mm thickness 9-10 mm sqm

11. 81.1.2 (b) Size 600X600mm thickness 9-10mm sqm

11. 81.2 In dark colour and shades etc.

11. 81.2.1 (a) Size 300X300 mm thickness 9-10 mm sqm

11. 81.2.2 (b) Size 600X600mm thickness 9-10mm sqm

591 Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality/ premium quality including grouting the joints with white cement and matching pigments etc. completeze 600*1200 mm thickness 9-10 mm

11. 82.1 For floor glossy/ rustic /stain/matt finished laid on 20mm thick cement mortar 1:4 (1 cement:4sand)

11. 82.1.1 Size 600X600 mm thickness 9-10 mm sqm

11. 82.1.2 Size 800X800mm thickness 9-10 mm sqm

11. 82.1.3 Size 800X1600 mm thickness 9-10 mm sqm

11. 82.1.4 Size 1000*1000 mm thickness 9-10 mm sqm

11.82.1.5 Size 600*1200 mm thickness 9-10 mm sqm

11.82.16 Size 800*1200 mm thickness 9-10 mm sqm

11.82.1.7 Size 1200*1200 mm thickness 9-10 mm sqm

11.82.1.8 Size 1200*1800 mm thickness 9-10 mm sqm

11.82.1.9 Size 1200*2400 mm thickness 9-10 mm sqm

11. 82.2 For wall stain / rustic finished laid on 12mm thick cement mortar 1:3 (1 cement:3sand) prepared same day when mortar is still green i.e.within 6 hours,

Size 300X600 mm thickness 9-10 mm sqm

592 Providing and laying digital print random design(PGVT)/(GVT) vitrified tiles in different sizes with water absorption less than 0.05% and conforming to IS:15622 of approved make in all colours& shades, 1st quality / premium in skirting, riser laid our 12mm thick cement mortar 113 including grouting the joints with white cement and matching pigments etc. complete

11. 83.1 For skirting, risers etc.glossy/rustic/stain/matt finished in all colours and shades

11. 83.1.1 Size 600X600 mm thickness 9-10 mm sqm

11. 83.1.2 Size 800X800mm thickness 11-12mm sqm

11. 83.1.3 Size 600X1200 mm thickness 11-12mm sqm

11. 83.1.4 Size 800X1200 mm thickness 11-12mm sqm

593 Granite work gang saw cut (polished machine cut) of thickness 12 mm for wall lining, skirting, risers of steps and dado (veneer work), back filling with a grout of average 12 mm thick in cement mortar 1:3 (1 Cement: 3 sand) including pointing with white cement mortar 1:2 (1 white cement: 2 marble dust) with an admixture of pigment to match the marble shade: (To be secured to the beaching by means of cramps, which shall be paid for separately).

11. 84.1 Area of tiles not less 0.18 sqm

11. 84.1.1 Fine granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter sqm

11. 84.1.2 Course granite light Black/light Red/ off White with crystals of other colors and various patterns sqm

11. 84.1.3 Gray/Pink/Brown with various patterns sqm

594 11.85 Providing and laying gang saw cut 12mm thick, mirror polished pre moulded (wherever required) and pre polished machine cut granite stone of required size and shape of approved shade, colour and texture in flooring laid over 20mm thick base of cemnt mortar 1:4(1cement:4sand) including grouting the joints with white cement mixed with matching pigments, epoxy touch ups etc. complete as per direction of Engineer-in-Charge.

11. 85.1 Area of tiles not less 0.18 sqm

11. 85.1.1 Fine grained granite dark Black/dark Red/ White with self design/ pattern/crystals of other colors of glitter sqm

11. 85.1.2 Coarse grained granite light Black/light Red/ off White with crystals of other colors and various patterns sqm

11. 85.1.3 Gray/Pink/Brown with various patterns sqm

595 11. 86 Providing and fixing artificial synthetic green long and fine yarns grass, UV/water resistant with SBR latex backing eco-friendly durable high density 100 % PP ( Poly Poplin ) anti UV fiber.denier 12000 dtex, stich rate 18 stiches per 10cm, stich density 16800 stiches/m2, tufted weight 1830g/sqm approx.

11. 86.1 Roll size will be 25.00m X 2.00m (25mm thick)- weight 150kg- per roll. sqm

11. 86.2 Roll size will be 25.00m X 2.00m (40mm thick)- weight 180kg- per roll. sqm

596 Providing and fixing laminated (engineered wooden flooring) of suitable thickness 10-14 mm of suitable grade category product of approved made out of core high density fibre board (HDF) &other component it treated for abrasion ,scratch ,moisture protection, flame protection,U.V resistant. backing with eco- friendly resins specified by the manufacturer .The material shall be applicable warranty formaldehyde free, eco friendly, highly recommended for high traffic area and fully recyclable and matching shed and excluding quantity of skirting and profile . sqm

597 Providing and fixing single layer homogeneous (solid wooden flooring) of suitable thickness 14 - 18 mm of suitable grade category product of scratch protection, moisture protection, flame protection U.V. resistant, backing under layer on min 2 mm thickness The material shall be applicable warranty formaldehyde free, eco friendly ,highly recommended for high traffic area and fully recyclable and matching shade and excluding quantity of skirting and profile. sqm

598 Providing and fixing tuffed 1/10” loop pile (carpet tile / Carpet). EN (Euorpean Standard) size 50cm x 50cm /roll Size of total thickness 5.5 mm and above with total mass of 4100g/m2approx and with polyester fleece primary backing with standard dimensional stability with impact sound / noise reduction and recommended for high traffic acoustical area. sqm

599 Providing and fixing spc (stone plastic composite) virgin pvc water resistant proof vinyl flooring with a thickness between 4 to 8mmuv coated layer with a wear layer of 0.3 to 0.80mm with a SPC core layer of 2.00 to 5.00 mm with a SOP of heat resistant, voc free, easy to cut, anti microbial protection in the form of tiles, planks helpful in environmental of profection health. sqm

600 Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone tile flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20 mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with white cement mix with matching pigment etc. complete as per direction of Engineer-in-Charge.

601 Providing and laying pre mirror polished/ pre polished fine grain machine cut sand stone slab flooring 20mm thick (hardness should not be less than 7 and water absorption should not be more than 0.3%) of required size of area more then .50 sqm and shape of approved shade, flooring in plazas open staircase and similar locations, laid over 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joint with cement mix matching pigment etc. complete as per direction of Engineer -in-Charge. sqm

602 Supply and application of vinyl flooring of 4.5 mm thick with 1.5 mm wear layer comes in oll size of (1.8mx15m) available in different color options. PVC vinyl cushion indoor flooring comes with I indentation of less than 0.5 and also have good abrasion and impact resistance. It also have better shock absorption property of more than 35 and good ball rebounce property of about 98%.

603 0.9 Providing corrugated G.S. Sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

12\.1\.1;@ 1.00mm thick with zinc coating not less than 275gm/m² sqm

12\.2\.2;@ 0.80mm thick with zinc coating not less than 275gm/m² sqm

12\.3\.3;@ 0.63 mm thick with zinc coating not less than 275gm/m² sqm

604 0.9 Straight cutting in G.S. sheet of any thickness roofing for making opening of area exceeding 40 sq. decimetre for chimney stacks, sky light etc. meter

605 0.0 Extra for circular cutting in C.G.S. sheet of any thickness roofing for making opening of area exceeding 40 square decimetre : meter

606 0.0 Providing ridges or hips of width 60 cm over all width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia. G.I. limpet and bitumen washers complete.

12\.1\.1;@ 0.80mm thick with zinc coating not less than 275gm/m² meter

12\.2\.2;@ 0.63mm thick with zinc coating not less than 275gm/m² meter

607 0.0 Providing valleys of 90cm wide overall in plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8mm dia. G.I. limpet and bitumen washers complete. 1.60 mm thick with zinc coating not less than 350gm/m² meter

608 0.9 Providing and Fixing of 40 cm over all width plain, G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts,G.I.limpet and bitumen washer complete, bent to shape and fixed in wall with cement mortar 1:3 (1cement : 3 sand).1.00mm thick with zinc coating not less than 275gm/m² meter

609 0.9 Providing and fixing 15 cm wide 45 cm over all semicircular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc. including making necessary connections with rain water pipes complete.

12\.1\.1;@ 0.80mm thick with zinc coating not less than 275gm/m² meter

12\.2\.2;@ 0.63mm thick with zinc coating not less than 275gm/m² meter

610 0.0 Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks, bolts and nuts 8 mm dia.G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required. sqm

611 0.0 Extra for straight cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated, semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter for chimney stacks, skylights etc.. meter

612 Extra for circular cutting in reinforced by organic fibres and/or inorganic synthetic fibres cement corrugated/ semi corrugated 6 mm thick sheet roofing for making openings of area exceeding 40 square decimeter. meter

613 Extra for providing and fixing wind ties of 40x 6 mm flat iron section. meter

614 Providing and fixing ridges and hips in fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing with suitable fixing accessories or self drilling fastener and EPDM washer etc. complete.

12\.01\.1;@ Corrugated serrated adjustable ridges meter

12\.02\.2;@ Plain wing adjustable ridges meter

12\.03\.3;@ Close fitting adjustable ridges meter

12\.04\.4;@ Unserrated adjustable hips meter

615 Providing and fixing fibre cement reinforced by organic fibres and/or inorganic synthetic fibres roofing accessories in all colours with polymer coated J or L hooks, bolts and nuts and or G.I. seam bolts and nuts, G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete:

12.13.1 Corrugated apron pieces meter

12.13.2 Eave's filler pieces meter

12.13.3 North light curves meter

12.13.4 ventilator curves meter

12.13.5 Barge boards meter

12.13.6 Ridge finials pair

12.13.7 Special north light curves each

12.13.8 S type louvers meter

616 Providing flat iron brackets 50x3mm size with necessary bolts, nuts washers etc. for fixing G.S. sheets gutters with purlins. meter

617 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS:277 in 240 mpa steel grade, 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self-drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. sqm

618 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating 120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self-drilling/ self- tapping screws complete :

12.16.1 Ridges plain (500 - 600mm). meter

12.16.2 Flashings/ Aprons.( Upto 600 mm) meter

12.16.3 North light curves. meter

12.16.4 Barge board (Upto 300 mm) meter

12.16.5 Crimp curve sqm

12.16.6 Gutter. (600 mm over all girth) meter

619 Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.

12.17.1 2mm thick corrugated (2.5" or 4.2" or 6") or step-down (2"or 3"or 6") as specified. sqm

12.17.2 2mm thick flat. sqm

620 Providing and Fixing of sky lights consisting of Multi cell/tight cell Polycarbonate Panel System of approved colour, 16 mm thick (minimum) having uniform in color with an integral Tight-Cell core constructed not to exceed 4mmx4mm in a cross

section, involved such as bolts nuts and screws etc. and labour for cutting bending to required profile, necessary scaffolding, hoisting in position etc. for proper completion of the work etc. complete as per specification drawings and direction of Engineer in charge. Finished surface area of roofing fixed over steel tubular structure shall be measured for payment. MS tabular frame work shall be measured separately for payment.

12.18.1 10mm thick sqm

12.18.2 16mm thick sqm

621 Providing sand stone slab 40 to 50 mm thick for roofing and laying them in cement mortar 1 : 4 (1 cement : 4 sand) over wooden karries or R.C.C. battens or structural steel sections (Karries or battens or structural steel sections to be paid separately) including pointing the ceiling joints with cement mortar 1:3 (1 cement : 3 sand ) complete :

12.19.1 Red sand stone slab sqm

12.19.2 White sand stone slab : sqm

622 Painting top of roofs with residual type petroleum bitumen of grade VG 10 of approved quality @ 17kg per 10 sqm impregnated with a coat of sand at 60 cum per 10sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil complete : sqm

623 Providing and applying two coats of High Albedo paint having minimum Solar Reflective Index (SRI) 108 (with solar reflectance and thermal emittance tested as per ASTM) C 1549 and ASTM C 1371 respectively), VOC less than 10 cc/gm. The coating thickness and the methodology of application shall be strictly as per manufacturer's specifications and as approved by engineer In charge. Surface preparation includes cleaning with metal wire brush to remove all dust, fungus etc., and washing with water all complete. The contractor shall give guarantee for the performance of SRI and also the durability of coating, all complete as per direction of Engineer-in-charge. sqm

624 Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection >0.70 and initial emittance >0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 sand) and grouting the joints with mix of white cement and marble powder in ratio of 1:1, including rubbing and polishing of sqm

the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner.

625 Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness and of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 sand) mixed with 2% integral water proofing compound laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 sand) and finished neat complete. sqm

626 Providing and fixing on roof pressed clay tile (Mangalore tile) 20 mm nominal thickness and of approved size and as per approved pattern on steel frame work complete (steel frame work to be paid separately) sqm

627 Providing and laying on roof pressed clay tile ridge (Mangalore tile) of 20mm thickness of approved pattern on steel frame work complete (steel frame work to be paid separately) sqm

628 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 sand) as per standard design : In 75x75mm deep chase meter

629 Making khurras 45x45 cm (sunk area) with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 sand : 4 graded stone each

aggregate of 20 mm nominal size) over P.V.C. sheet 1mx1mx400micron, finished with 12mm cement plaster 1:3 (1 cement : 3 sand) and a coat of neat cement rounding the edge and making and finishing the outlet complete so as to receive rain water/ spillage water on roof in a sunk area and completely rain out in a near perfect strain meter motion into rain water pipe.

630 Providing and fixing M.S. holder bat clamps of approved design to C.I. Or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10cm of Cement Concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc.

12.28.1 100 mm diameter each

12.28.2 150 mm diameter each

631 Providing and fixing ISI marked sand cast iron rain water pipes.

12.29.1 100 mm dia minimum wall thickness 5mm meter

12.29.2 150 mm dia minimum wall thickness 5mm meter

632 Providing lead caulked joints to sand cast iron rain water pipes and fittings :

12.30.1 100 mm dia. Pipe each

12.30.2 150 mm dia. Pipe each

633 Providing, fixing and embedding sand cast iron accessories for rain water pipes in the masonry surrounded with 12 mm thick cement mortar of the same mix, as that of masonry (lead caulking will be paid for separately) :

12.31.1 Sand cast iron bend :

12.31.1.1 100 mm diameter each

12.31.1.2 150 mm diameter each

12.31.2 Sand cast iron plain shoes :

12.31.2.1 100 mm diameter each

12.31.2.2 150 mm diameter each

634 Providing and fixing on wall face Rigid Unplasticised rigid PVC (upvc) Single socketed rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

12.32.1 75 mm diameter (minimum wall thickness 1.8mm) metre

12.32.2 110 mm diameter (minimum wall thickness 2.2mm) metre

635 Providing and fixing on wall face Unplasticised - UPVC moulded fittings/ accessories for Unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion.

12.33.1 Coupler

12.33.1.1 75 mm (minimum wall thickness 1.8mm) each

12.33.1.2 110 mm (minimum wall thickness 2.2mm) each

12.33.2 Single push fit Coupler :

12.33.2.1 75 mm (minimum wall thickness 1.8mm) each

12.33.2.2 110 mm (minimum wall thickness 2.2mm) each

12.33.3 Single tee with door

12.33.3.1 75x75x75 mm (minimum wall thickness 1.8mm) each

12.33.3.2 110x110x110 mm (minimum wall thickness 2.2mm) each

12.33.4 Single tee without door

12.33.4.1 75x75x75 mm (minimum wall thickness 1.8mm) each

12.33.4.2 110x110x110 mm (minimum wall thickness 2.2mm) each

12.33.5.1 75 mm bend (minimum wall thickness 1.8mm) each

12.33.5.2 110 mm bend (minimum wall thickness 2.2mm) each

12.33.6 Shoe (Plain)

12.33.6.1 75 mm Shoe (minimum wall thickness 1.8mm) each

12.33.6.2 110 mm Shoe (minimum wall thickness 2.2mm) each

636 Providing and fixing unplasticised - PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

12.34.1 75 mm (minimum wall thickness 1.8mm) each

12.34.2 110 mm (minimum wall thickness 2.2mm) each

637 Providing and fixing to the inlet mouth of rain water pipe fixing cast iron grating 15 cm diameter and weighing not less than 440 grams. each

638 Providing and fixing to the inlet mouth of rain water pipe PTMT (an Engineering Thermoplastic) grating square (Slit) 150 mm square with a height of 8 mm and weighing not less than 100 gms. each

639 Providing and fixing 100 mm/110 mm diameter and 60 cm long rain water spout in cement mortar 1:4 (1 cement : 4 sand)

12.37.1 Stone ware spout each

12.37.2 Upvc spout (Pipe dia.110 mm) each

640 Providing and fixing of self-supported mechanically seamed roofing system, made of high quality steel, having 340 MPA yield strength, pre coated galvalume sheet as per ASTM A 792 M of base metal thickness from 0.8 mm to 1.6mm (tolerance ± 0.02mm). High grade steel sheet should have 55% aluminum and 45% zinc coating by hot-dip process of minimum 25 micron The rate includes supplying, fixing, loading unloading, hire charges of all plants machineries, anchors, fasteners, washers, bolts, epoxy, paint and all wastage etc. complete. Accessories and fixtures like hangers/clamps for installation of lighting /fixtures /utility/ duct as per requirement and ventilators, skylight can also be provided at crown/ridge by making cuts into the panels which is to be paid separately. This item shall be executed only by the agency which has all required manufacturing machineries and necessary expertise.

12.38.1 Base metal thickness 0.8mm up to span 15 meter sqm

12.38.2 Base metal thickness 0.9mm , up to span 18 meter sqm

12.38.3 Base metal thickness 1.0 mm, up to span 21 meter sqm

12.38.4 Base metal thickness 1.1 mm, up to span 23 meter sqm

12.38.5 Base metal thickness 1.2mm, up to span 25meter sqm

12.38.6 Base metal thickness 1.3 mm, up to span 27 meter sqm

12.38.7 Base metal thickness 1.4mm, up to span 29meter sqm

12.38.8 Base metal thickness 1.5 mm, up to span 31 meter sqm

12.38.9 Base metal thickness 1.6 mm, up to span 33 meter sqm

641 12.38.10 Providing and fixing galvalume 1.0 mm thick clamps/hangers of size 75X140mm with saddle of 50mm dia, riveted at one side and nut and bolt at other side, to self-supported roofing system by mechanical seaming to suspend light fixture/cable stay/false ceiling/duct etc., at their location which should be planned earlier by engineer-in-charge. Clamps shall be fixed during seaming of panels. each

642 12.38.11 Providing and fixing advanced type hurricane turbo ventilator to self- supporting roof having neck dia 600mm made of aluminum having 24 nos vertical vanes made of aluminum sheet. Ventilator should be fixed on 1 to 2mm thick G.I. ring which shall be fixed on 2mm thick polycarbonate sheet. Polycarbonate sheet shall have foam tap or rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates i/c of all material, labour fittings screw, rings, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof. each

643 12.38.12 Providing and fixing of 2mm thick polycarbonate sheet to self-supported roofing system. The sheet shall have tensile strength and elongation as per ASTM D 638, refractive index as per ASTM D 592, light transmission as per ASTM D 1003 and specific gravity as per STM D 792. Polycarbonate sheet shall have foam tap or sqm

rubber gasket under and over it and fixed by 1 to 2 mm thick aluminum angle 25X25mm with self- tapping screw to panels. All joints shall be sealed by silicon. Rates include of all material, labour, fittings, screw, foam tap, aluminum angles etc. complete. Deduction shall not be made for cutting area of self-supported roof.

644 Supply, fabrication and erection of three-dimensional space frame steel structure consisting of support node, primary space frame members, space notes nodes, bolts, sleeves (nut), purlin stool, purlin etc. to support roof sheet in plain or curved shape. (Approximate zinc coating thickness 77 Microns) and shall not be less than 400 g/sqm (Approximate zinc coating thickness 56 microns). Bolts, sleeves and cones shall be electro-galvanized to ASTM B 633 Type 2, SC3. Shop drawings along with structural design analysis shall be provided by the manufacturer for approval of the engineer in charge. Rate shall include cost of design, all material, all lifts, abour, transport, storage, machines, tools and plants, wastages, erection and installation at site all necessary scaffolding etc. necessary to provide finished product but excluding cost of erection/construction of support shaft and roof sheet. kg

Providing nd fixing rooofing consist of 0.8 mm thick galvanized steel deck sheet confirming to IS 277:1992 used as permanent shuttering over which MS wire mesh 3mm laid at 100x100 mm grid including edge trim covered with concrete. This metal deck will be supported on structural steel beam with shear studs. (Structural steel like Beam, column, joists etc. & concrete of different grade as per design will be paid separately). sqm

645 11.41 Providing and fixing in position roof tile under lay using 12mm thick(minimum) Moisture/fire Resistance heavy duty fibre cement board(High Pressure Steam Cured) Type A,Category 4 conforming to IS 14862:2000, fixed on Steel frame work of 610mmx610mm or 610mmx1220mm grid by counter sunk stainless screw @ 300mm C/C all complete as per the drawings. The boards are to be fixed on the frame work in staggered manner keeping a uniform gap of 2mm.Finally, the roof tile like Shingles/Mangalorian Tiles etc may be laid on the board substrate by sealing the joints properly with filler material or sealant to ensure no leakage through joints. All completeas per drawings, specification and as per direction of Engineer-in-Charge. sqm

Note - MS Section structure and roof tile like Shingles/Mangalorian Tiles etc cost will be paid seprately.

646 12.42 Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Fibre glass wool conforming to IS: 8183 density 24kg/m3, 50mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building . sqm

647 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS : 8183, density 16kg/m3, 50mm thick, wrapped in 200G Virgin Polythene bags placed over existing false ceiling and held in position by criss-crossing GI wire. sqm

648 Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in-charge :

12.44.1 With Type N - Normal 50 mm thick sqm

12.44.2 With Type SE - Self Extinguishing type 50 mm thick. sqm

649 Providing and laying thermal insulation of roofing with 40 mm thick impervious sprayed, closed cell free Rigid Polyurethane foam over deck insulation conforming to IS - 12432 Pt. III (density of foam being 40-45 kg/cum), over a coat of polyurethane primer applied @ 6-8 sqm per litre, laying 400 G polythene sheet over PUF spray and providing a wearing course of 40 mm thick cement screed 1: 2 : 4 (1 cement : 2 sand : 4 stone aggregate 20 mm nominal size) in chequered rough finish, in panels of 2.5 mx2.5 m and embedding with 24 G wire netting and sealing the joints with polymerized mastic, all complete as per direction of Engineer-in-Charge. sqm

650 Providing and fixing thermal insulation with Resin Bonded Fibre glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick, wrapped in 200G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held in position by criss crossing GI wire etc. complete as per directions of Engineer-in- Charge. sqm

651 Providing and fixing thermal insulation of ceiling (under deck insulation) with Resin Bonded Rockwool conforming to IS: 8183, density 48 kg/ m3, 50 mm thick, wrapped in 200 G Virgin Polythene bags fixed to ceiling with metallic cleats (50x50x3 mm) @ 60 cm and wire mesh of 12.5mm x 24 gauge wire mesh, for top most ceiling of building. sqm

652 Providing and fixing thermal insulation with Resin bonded rock wool conforming to IS: 8183, density 48 kg/m3, 50 mm thick, wrapped in 200 G virgin Polythene bags placed over existing false ceiling and held in position by criss- crossing GI wire. sqm

653 Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48 kg/m3. 50 mm thick, wrapped in 200 G Virgin Polythene Bags fixed to wall with screw, rawl plug and washers and held and in position by criss cossing GI wire etc.complete as per directions of Engineer-in-Charge sqm

654 Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, jointing tapes, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with:

12.58.1 10mm thick plaster of Paris(gypsum anhydrous) sheet 10mm thick pop board

12.58.1.1 Flat surfaces sqm

12.58.1.2 Curved surfaces Sqm

12.58.1.3 Sunk or raised mouldings sqm

12.58.1.4 Extra for providing in the plaster of Paris (Gypsum anhydrous) ceiling above 5 metre height from floor level. sqm per mtr height

12.58.2 12.5 mm thick tapered edge gypsum board

12.58.2.1 Plain board conforming to IS: 2095- Part I : 2011 (Board with BIS certification marks). sqm

12.58.2.2 Fire resistant Glass Reinforced Gypsum (GRG) board conforming to IS: 2095- (Part 3) : 1996 (Board with BIS certification marks) sqm

12.58.2.3 Gypsum moisture resistant board. sqm

12.58.2.4 Fully Perforated Gypsum Plaster Board having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge and as per manufacturer's specification, with all 4 side tapered and backed by acoustical tissue with NRC value not less than 0.60. sqm

12.58.3 8 mm thick Calcium Silicate Board made with Calcareous and Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process. sqm

655 Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of mainT" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25

x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre- painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.

12.59.1 GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending sqm

12.59.2 GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. sqm

12.59.3 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a ompletely sealed unit. sqm

12.59.4 12.5 mm thick fully Perforated Gypsum Board tile made from plasterboard having glass fibre conforming to IS: 2095 part I, of size 595x595 mm, having perforation of 9.7x9.7 mm at 19.4 mm c/c with center borders of 48 mm and the side borders of 30 mm, backed with non woven tissue on the back side, having an NRC (Noise Reduction Coefficient) of 0.79, with 50 mm resin bonded glass wool backing. sqm

12.59.5 Glass fiber Acoustical Suspended Ceiling System with 16 mm thick tegular edge or micro look edge tiles of size 595x595mm.The tiles should have Humidity Resistance (RH) of 99%, NRC 0.5, Light Reflectance ≥83%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 and7) in module size of 600 x 600 x 16mm with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 38 - 41%. The Tile and Grid system used together should carry a 15 year warranty. sqm

12.59.6 8mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primedcolour tiles of size 595X595 mm. sqm

12.59.7 6mm thick non-asbestos multipurpose termite, fire & moisture resistance cement bonded particle board as per IS: 14276, white primed colour tiles of size 595X595 mm. sqm

656 Providing and fixing GI Clip in Metal Ceiling System of 600x600 mm module which includes providing and fixing ‘C’ wall angle of size 20x30x20mm made of 0.5mm thick pre painted steel along the perimeter of the room with help of nylon sleeves and wooden screwsat 300mm center to centre, suspending the main C carrier

and in direction perpendicular to it at 600mm centers with help of suspension brackets. Wherever the main C carrier and spring T have to join, C carrier and spring T connectors have to be used. All sections to be galvanized @ 120 gms/sqm (both side inclusive) Fixing with clip in/swing down tiles into spring 'T' with

12.60.1 GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and sqm

electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending.

12.60.2 GI Metal Ceiling Clip in /swing down plain Beveled edge global white color tiles of size 600x600 and 0.5mm thick with 25mm height, made of G I sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8mm dia holes and having NRC of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation. sqm

657 Providing & Fixing of Unperforated Antibacterial Metal Tile Ceiling System comprising of Tile of 600mm wide and 600mm long manufactured out of 0.7mm thick aluminium alloy 3105 with beveled edge of 4.15mm width and height of 32mm. The Tile will be manufactured on advanced equipment that includes several levelling stages in the manufacturing process by approved certified manufacturers. The Tile shall be clipped into clip in rail of 0.5mm thick G.I. in form of a grid system using a cross connector. The clip in rail shall be supported from slab by means of rigid Suspension of 4mm G.I.Road, Hold on Clamp with Clip. (Rate include all materials and labour). sqm

658 Providing and fixing board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately):

12.62.1 12mm thick insulating board

12.62.1.1 Natural colour insulating board sqm 550..00

12.62.1.2 White face insulating board sqm

12.62.1.3 Flame retardant face insulating board sqm

12.62.2 Flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 12 mm thick marked in ceiling with necessary nails etc. complete sqm

12.62.3 6 mm thick plain Multipurpose Cement board ( High Pressure steam cured ) as per IS : 14862, with suitable screws for fibre cement board in ceiling etc. complete sqm

12.62.4 6mm thick High Pressure Steam Cured non asbestos, reinforced with cellulose fibres,Moistur& fire Resistance heavy duty fibre cement board, Type A,Category 4 conforming to IS 14862:2000.(for wet areas) sqm

12.62.5 4 mm thick High Pressure Steam Cured non asbestos, pre-painted, self- embossed, designer cement boardType B, Category 3 conforming to IS 14862:2000 . of approved texture,design patterns sqm

659 Extra for Circular cutting and wastages in ceiling with: board only (frame work) Natural colour insulating 12 mm thick board paid separately. meter

660 Extra for providing and fixing ceiling to curved surfaces in narrow widths sqm

661 Providing and fixing false ceiling with 12 mm thick plain/ semi perforated or with design ceiling tiles of BWP type phenol formaldehyde synthetic resin bonded pressed particle board conforming to IS:3087, finished with a coat of aluminium primer on both sides and edges including two coats of synthetic enamel paint of approved quality on exposed face, fixed to a grid made out of anodised aluminium (with 15 micron anodic coating) The frame work shall be suspended from ceiling by level adjusting hangers of 6 mm dia M.S rod fixed to roof slab by means of ceiling cleats and dash fastener. The suspenders shall be placed 600 x 1200 mm centre to centre including fixing to the sqm

frame with C.P brass screws and applying a priming coat of zinc chromate yellow primer (aluminium frame work shall be paid separately).

662 Providing and Fixing colour coated profile sheet of minimum 1015 mm effective cover width and nominal 28.5 mm deep ribs with subtle sqm

square fluting in the five pan at nominal 203 mm centre-to-centre. The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every 1 meter c/c for confirming genuinity of the material. The sheet shall be fixed using self- drilling /self-tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape

663 Extra for providing 3 mm thick translucent white acrylic plastic sheets of approved quality in false ceiling instead of 12 mm thick plain or design particle board ceiling tiles. sqm

664 Providing and fixing expanded polystyrene (thermacol) false ceiling (frame work to be paid separately) :

12.68.1 With Type N - Normal 50 mm thick sqm

12.68.2 With Type SE - Self Extinguishing type 50 mm thick sqm

655 12.69 Providing and fixing false ceiling with fabric fixing with nail etc. (frame work and beading to be paid separately).

12.69.1 costing upto 70/- per metre, sqm

12.69.2 Rs 70- 150 per meter sqm

12.69.3 Upto 200 per meter sqm

666 Providing and fixing perforated Aluminium panel ceiling of white/ natural satin colour supplied by approved manufacturers consisting of panel of standard size with bevel edge, panel length up to 6 m, coil Coated on a Continuous Paint Line suitable for Interior application, double baked and roll formed from enamelled corrosion resistance aluminium alloy AA 5050 (Al. Mg) for higher strength and good roll forming characteristics. Panel carrier shall be suspended by means of G.I. threaded rod having 6 mm diameter at a distance of 1.5 mtr. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc.

12.70.1 With panels of size 300mm wide X30mm deep X 0.7mm thick and panel carrier of size 40.5mm wide X 62mm deep X 0.9mm thick sqm

12.70.2 With panels of size 150mm wide X 15.5 mm deep X 0.5mm thick and panel carrier of size 32mm wide X 39mm deep X 0.95mm thick sqm

12.70.3 With panels of size 84mm wideX16mm deep X 0.5mm thick and panel carrier of size 62mm wide X 29mm deep X 0.95mm thick sqm

667 Providing and fixing un-perforated Aluminium Panel ceiling Supplied by approved manufacturers of standard white/ natural satin shade consisting of panel 30 mm/80mm/130mm/180mm wide X 15 mm deep X 0.5mm /0.6mm thick respectively, with square edges having panel length up to 6 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 5050 (Al.Mg) for higher strength and good roll forming characteristics. The Carrier shall be suspended by means of G.I. suspension rod 4mm diameter, and a Galvanised suspension spring clip at a distance of 1.7mtrs centre to centre. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The Measurements shall be wall to wall without any deductions for lights, diffusers, columns etc. sqm

668 Providing and fixing U Baffle Aluminium panel ceiling of different colors and finish supplied by approved manufacturers, consisting of panel size 50 mm width X 100 mm deep using 0.6 mm thick, panel length upto 4 mtr, Coil Coated on a Continuous Paint Line, Double baked and roll formed from enamelled corrosion resistance Aluminium alloy AA 3005 (Al.Mg) for higher strength and good roll forming characteristics. Actual distance of threaded rod/carrier might vary and to be calculated based on the actual drawing and site condition. The measurements shall be wall to wall without any deductions for lights, diffuses, columns etc.As an option, ceiling area above U Baffle can be painted by the contractor in black colour or any other colour as per the architect for better aesthetics before fixing this system.

12.72.1 Standard White / Natural Satin Shade sqm

12.72.2 Wooden Finish sqm

669 Supply & Fixing of perforated G.I false ceiling tile or plank using torsion spring fixing system supplied by approved manufacturer comprising of tile of 600 mm wide and 600 mm long manufactured out of 0.5 mm thick or plank of 600mm wide and 1200 mm long manufactured out of 0.6mm thick galvanised steel perforated with 2 mm dia. at a distance of 5mm centre to centre. Non-woven felt made of glass- reinforced fibre glued over the perforation at the back side of panels to provide noise reduction co efficient up to 0.7 NRc. “Tee” sections, 3.6m long, with factory punched flanges to receive torsion spring assembly. Main Tee on centre spacing to match panel length. Cross runners 24 mm deep, inverted “Tee” sections designed to interlock in to web of main tee section on designated spacing. Cross tee length to match panel length. Cross tees are spaced at a spacing of 600 mm on centre maximum. The measurements shall be wall to wall without any deductions for lights, diffusers, columns etc.

12.73.1 Tile of 600 mm wide ,600 mm long and 0.5 mm thick sqm

12.73.2 Plank of 600mm wide ,1200 mm long and 0.6mm thick sqm

670 Providing and fixing of composite perforated Gypsum board with Glass wool Fiber panel of Size 595x595x25 mm with 10mm square Perforation tiles false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “ “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. sqm

671 Providing and fixing of Composite perforated MDF board with Glass wool Fiber panel of Size 595x595x18 mm 10mm Square Perforation tiles (Square /Tegular Edge) false ceiling in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. sqm

672 Providing and fixing of Perforated Gypsum board with Acoustical Glass Fiber Tissue faced panel of Size 595x595x12.5mm, Square 10mm Perforation tiles (Square Edge) false ceiling panels in true horizontal level suspended on interlocking metal grid of hot dipped galvanized steel section (Galvanized @ 120 gms/sqm both sides inclusive) consisting of main “T” runners to be suspended from ceiling using GI slotted plates of size 27x37x25x1.6 mm fixed to ceiling with 12.50 mm dia and 40 mm long dash fasteners, 4 mm GI adjustable rods with galvanized butterfly level clips of size 85x30x0.80 mm spaced @ 1200mm centre to centre along with main T, bottom exposed width of 24mm of all T-sections shall be pre- painted with polyester paint all complete at all heights as per specifications and drawings and as directed by Engineer-in-Charge. sqm

673 Providing and fixing false ceiling at all heights with 15 mm thick integral densified tegular edged non- cementitious light sqm

weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, ) i.e.50 mm long, 8 mm outer diameter M- 6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per pecifications, drawing and as per directions of the Engineer-in-Charge.

674 Providing and fixing false ceiling at all heights with 15 mm thick integral densified micro look edged non- cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.80 grams per sqm) i.e. 50 mm long, 12 mm outer diameter M-6 dash fasteners with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. sqm

675 Providing and fixing false ceiling at all heights with 15 mm thick integral densified mirolook edge with BIO SAFE coating as per ISO 7251:2005, ISO 20743:2007 and ISO 21527-1:2008, making the tiles resistant to bacterial growth in case of any external bacterial contact made onto the surface of tiles, non-cementitious light weight calcium silicate false ceiling tile reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm with the help of Z cleat of 27x37x27x2 mm, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. sqm

676 Providing and fixing in position wall panelling at all heights with 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles., non-cementitious, reinforced with fibre and natural filler, having NRC (Noise Reduction Coefficient) of 0.10-0.20 for plain and designer 0.15-0.40 for pinhole texture and NRC 0.45-0.65 for fully perforated tiles as per IS 8225:1987, sound attenuation STA-32db. of 0.75 (minimum) as per IS 8225:1987, Light Reflectance of 85% (minimum), non-combustible as per BS:476 (part-4), 50-52% recycled content including fly ash, The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fibre joint tape roll 50mm wide (90 metre) roll and two coats of primer suitable for panelling as per manufacturer's specification as per direction of engineer-in-charge all complete. With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles. sqm

677 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4)- 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross- T of size 15x32 mm of length 600mm to form grid module of size 600 x 600mm, suspended from ceiling using galvanised mild steel items(galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M- 6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster ofsize 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge.

12.81.1 With semi perforated 12mm thick micro tegular edged GRG false ceiling tiles. sqm

12.81.2 With fully perforated 10mm thick square edged GRG false ceiling tiles for sound proof and acoustic. sqm

678 Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped 387alvanized steel sections (387alvanized387 @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre tocentre, and cross “T” of size 24x28mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mmpanel to from grid of size 600x600 mm, resting on periphery walls/ partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 sqm

mm made of 0.40 mm thick (minimum) sheet with the help of rawlplugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges 388alvani silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required.Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm longdash fasteners, 4 mm G.I. adjustable rods with 388alvanized steel levelclips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mmof all Tsections shall be pre- paintedwith polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer- in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/ opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity

679 Providing and fixing upvc plank, Plank size (340 X 2700 ) mm as per approved shade, the panel shall be laser catted end of plank fixing j-trim fixed and corner edge of ceiling fixed u pvc clip same colour and providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 125 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to sqm

the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts,other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular,j trim end clip includes in this item any other item not be paid sepratly complete in all respect as per the directions of Engineer-in-Charge

680 Providing & Fixing PVC ceilingsystem profile panel with click system interlock panel size 4000mmx340mmx1mm resistance to weather perfect finish in wood grain & solid colour maintenance free Resistance to weather truly anti bacterial. with edge profile J-trim on periphery & center profile T-trim in panel joint Complete System to be fixed on G.I. framework of ceiling section at 450 mm distance with enter section suspended by roof by G.I. angle hanger in proper line & level etc complete PRODUCT PECIFICATIONS:Meets or exceeds the standard specification of (ASTM D-4477) and its referenced documents. Impact resistance: No deformation observed. (Tested at 50 LBS) Tensile strength, MPa: >37.0 Tensile modulus, MPa: >2000 Surface distortion: None at 120F Squareness: <1/8” of square Length: Within ¼” of specification Lock control: Complies Color Change: <2 grayscales (16 hrs under 1200W/m2 UV radiation at 50 degrees)12.84 Sqm

681 Providing & Fixing of Mineral Fibre 1200x300mm (Nominal Size) tiles Acoustical Suspended Ceiling System with 16mm thick Beveled Tegular Edge Tiles and 15mm Bolt Slot Exposed Grid. The tiles shall have fissured visual with acoustical punctures, Humidity Resistance (RH) of 99%, NRC 0.6 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C- 423 standard, CAC of 35db as per ASTM E1414, Light Reflectance 87% as per ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of class 0/1 as per BS 476 Part 0/7 and Class A as per ASTM E84 with 16mm Beveled Tegular edge and 8mm drop in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of 32%. The tile shall have certifications from GRIHA/ green pro etc and SUSPENSION The tile shall be laid on grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour with metered ends & “bird's mouth” notches to provide mitred cruciform junctions colour global white (Matching to tile color). Grid shall have double stroke rotary stitching on all T sections Sqm

i.e. the Main Runner & 1200 mm Cross Tees with a The deflection loading of the system shall be 7.9 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 9.5 kg/m. The end details of the cross tee shall be made of pre hardened steel clip fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee

to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull-out strength of mare than 100kg. The T Sections shall be made of 90 gsm as per IS 277 (2003) pre-painted steel with baked polyester paint of OT {Jemlfng capability. ,lj\|STALLATlON To comprise main runner spaced at 1200mm securely fixed to the structural soffit using suspen9ion system (specifications below) at 1200mm maximum. The First/ Last suspension system at the end of each main runner shall not be greater than 450mm from the adjacent wall along with the first and tha last main beam shall be at less than 600mm from the wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 1200mm to form 1200 x 1200 mm module. Cut cross tees longef than 600mm require independent support. 1200 x 300mm module to be formed by fittinB 1200mm long flush fi\ting cross tees (with no mitre cut on cross tees) centrally between the 1200 mm cross tees(Miter cut at every 300 mm). Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum. Installation shall be carried out as per Manufacturer recommended procedure.SUSPENSION SYSTEM accessories supplied by Manufacturer consisting of M6 Anchor Fasteners with hanger hole, pre-straightened hanger wire of dia - 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum loading strength of 1 10 kgs. (Optionally, adjustable hook dips made of 0.7mm thick Grade 1 C55 galvanized spring eteel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners).

682 Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System with minimum 14 to 15 mm thick Bevelled Tegular Edge Tiles and 15mm Face Exposed Grid. The tiles shall have Assured visual with acoustical punctures , Humidity Resistance (RH) of 95%, NRC 0.5 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C-423 standard, CAC of 30db as per ASTM E1414, Light Reflectance 85% as per ASTM E- 1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour G)obal White, Fire Performance of class 0/1 as per BS 476 Part 6/7 and Class A as per ASTM E84 with 15mm Bevelled Tegular edge and 8mm drop in module size of 600 x 6OOmm. It shall be suitable for Green Building application, with Recycled content of 30%. The tile shall have certifications from GRIHA/ GreenPro etc. SUSPENSION: Sqm

Tne end details of the cross tee shall be made of pre hardened steel and fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of hot dipped galvanized steel of 90 gsm as per IS 277 (2003) and pre-painted steel with baked polyester paint with OT bending capability. All border cross tee/main beam shall be levelled using perimeter fill. INSTALLATION: Tocomprise main runner spaced at 1 200mm secure\y fixed to the structural soffit using suspenGion system (specifications above) at 1200mm maximum. The First/Last suspension system at the end of each main runner shall not be greater than 45Omm from the adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall. Flush fitting 120Omm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm re9uire independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross teen centra\Iy between the 1200 mm cross tees. Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum. Installation shall be canied out as per Manufacturer recommended procedure. SUSPENSION SYSTEM accessories supplied by Manufacturer consisting of M6 Anchor Fasteners with hanger hole, jsre-straightened hanger wire of dia - 2.5 mm of 1.80 m length having a tensiie strength of 344-413 MPa and a minimum loading strength of 1 10 kgs. (Optionally, adjustable hook dips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 2Omm and 4 mm aquiiine wire to be used for level adjustment during installation purpose in main runners).

683 Providing & Fixing of Mineral Fibre Acoustical Suspended Ceiling System with Bevelled Tegular Edge Tiles of 16mm thickness and 15mm Bolt Slot face exposed grid. The tiles shall have sand texture visual with acoustical punchers , Humidity Resistance (RH) of 99%, NRC 0.5 (Average value of Absorption Co-efficient readings taken at 250 Hz, 500 Hz, 1000 Hz and 2000 Hz) as per ASTM C423 standard, CAC of 33db as per ASTM E1414, Light Reflectance ≥85% as per ASTM E-1477, Thermal Conductivity k = 0.052 - 0.057 W/mK, Colour Global White, Fire Performance of class 0/1 as per BS 476 Part 6/7 and Class A as per ASTM E84 with 16mm bevelled Tegular edge and 8mm drop in module size of 600 x 600mm. It shall be suitable for Green Building application, with Recycled content of 40%. The tile shall have certifications from GRIHA / Green Pro. Etc. SUSPENSION: The tile shall be laid on profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour with mitred ends & “bird’s mouth” notches to provide mitred cruciform junctions colour global white (Matching to tile color). Grid shall have double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 38mm (all sections). The deflection loading of the system shall be 7.9 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) with a deflection loading of 9.5 kg/m. The end details of the cross tee shall be made of pre hardened steel clip fixed to the ends of the cross tee to provide double locking between “cross tee to cross tee” Sqm

The tile shall be laid on 15 mm wide T - section flanges colour global white (matching to tile color) having roll formed double stroke rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees witha web height of 38mm (all sections). The deflection loading of the system shall be 12.5 kg/m2 (as per standard installation layout mentioned below) and main beam tested as per ASTM C635 (Deflection limit less than L/360) witha deflection loading of 15kg/m. and “cross tee to main beam”. All main beam to main beam and cross tee to cross tee connection shall have a pull out strength of more than 100kg. The T Sections shall be made of 90 gsm as per IS 277 (2003) pre-painted steel with baked polyester paint of 0T bending capability. INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using suspension system (specifications below) at 1200mm maximum.

The First/Last suspension system at the end of each main runner shall not be greater than 450mm from the adjacent wall along with the first and the last main beam shall be at less than 600mm from the wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls using screws at 450mm centre to centre maximum. Installation shall be carried out as per Manufacturer recommended procedure. SUSPENSION SYSTEM accessories supplied by Manufacturer consisting of M6 Anchor Fasteners with hanger hole, pre-straightened hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344- 413 MPa and a minimum loading strength of 110 kgs. (Optionally, adjustable hook clips made of 0.7mm thick Grade 1 C55 galvanized spring steel of dimension 100 x 20mm and 4 mm aquiline wire to be used for level adjustment during installation purpose in main runners).

684 0.9 12 mm cement plaster of mix :

13\.1\.1;@ 1:4 (1 cement : 4 sand) sqm

13\.2\.2;@ 1:6 (1 cement : 6 sand) sqm

685 0.9 15 mm cement plaster on the rough side of single or half brick wall of mix

13\.1\.1;@ 1:4 (1 cement : 4 sand) sqm

13\.2\.2;@ 1:6 (1 cement : 6 sand) sqm

686 0.0 20 mm cement plaster of mix :

13\.1\.1;@ 1:4 (1 cement : 4 sand) sqm

13\.2\.2;@ 1:6 (1 cement : 6 sand) sqm

687 0.0 12 mm cement plaster finished with a floating coat of neat cement of mix :

13\.1\.1;@ 1:3 (1 cement : 3 sand) sqm

13\.2\.2;@ 1:4 (1 cement : 4 sand) sqm

688 0.0 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix

13\.1\.1;@ 1:3 (1 cement : 3 sand) sqm

13\.2\.2;@ 1:4 (1 cement : 4 sand) sqm

689 0.9 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) finished with a top layer 6mm thick cement plaster 1:4 (1 cement : 4 sand). sqm

690 0.9 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 sand) and a top layer 6mm thick cement plaster 1:3 (1 cement : 3 sand) finished rough with sponge. sqm

691 0.0 6 mm cement plaster of mix : 1:3 (1 cement : 3 sand) sqm

692 0.0 6 mm cement plaster 1:3 (1 cement : 3 sand) finished with a floating coat of neat cement and thick coat of Lime wash on top of walls when dry for bearing of R.C.C. slabs and beams. sqm

693 Neat cement punning sqm

694 Rough cast plaster upto 10m height above ground level with a mixture of sand and gravel or crushed stone from 6mm to 10mm nominal size dashed over and including the fresh plaster in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. Finished with ordinary cement. sqm

695 Pebble dash plaster upto 10m height above ground level with a mixture of washed pebble or crushed stone 6mm to 12.5mm nominal size dashed over and including fresh plaster in two layers under layer 12mm cement plaster 1:4 (1 cement: 4 sand) and top layer 10mm cement plaster with cement mortar 1:3 (1 cement: 3 sand) mixed with 10% finely grounded hydrated lime by volume of cement. sqm

696 Providing sand faced plaster upto 10meter hight above ground level concrete or brick masonry surfaces in two coats, base coat of 13 mm thick in cement mortar 1:4 (1 cement: 4 sand), clearing the surface by combing it and finishing coat of 8 mm. thick in cement mortar 1:3 (1 cement: 3 sand) and taking out surface grains by mechanical arrangement or applying second coat by mechanical means including cost of all material, labour, and T and P including all lead, lift and scaffolding etc. complete. sqm

697 Extra for providing and mixing water proofing material in cement plaster work in proportion recommended by the manufacturers. per 50 kg cement used in the mix

698 Extra for plastering

13.15.1 Exterior walls of height more than 10 m from ground for every additional height of 3 m or part thereof sqm

13.15.2 Interior walls of height more than 6 m from floor level for every additional height of 3 m or part thereof sqm

699 Extra for plastering on circular work not exceeding 6 m in radius:

13.16.1 In one coat sqm

13.16.2 In two coats sqm

700 Extra for plastering done on moulding cornices or architraves including neat finish to line and level:

13.17.1 In one coat sqm

13.17.2 In two coats sqm

701 Extra for plastering Spherical, Groined ceiling, Flewing soffits.

13.18.1 Spherical ceiling sqm

13.18.2 Groined ceiling sqm

13.18.3 Flewing soffits sqm

702 Washed stone grit plaster on exterior walls of height upto 10 M. above ground level in two layers, under layer 12mm cement plaster 1:4 (1 cement : 4 sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement : 1/2 sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone sqm

chippings,complete as per specification and direction of Engineer- in- charge (Payment for providing grooves shall be made separately).

703 Forming groove of uniform size 20 or 15 mm wide and 15 mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge : meter

704 Extra for washed grit plaster on exterior/interior walls of height more than 10m from ground/floor level for every additional height of 3 m or part thereof. sqm

705 Extra for washed stone grit plaster on circular work not exceeding 6m in radius (in two coats). sqm

706 Forming groove of uniform size from 12x12mm and upto 25x15mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. meter

707 Extra for using white cement in place of ordinary cement in the top layer of the item of washed stone grit plaster. sqm

708 Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part -1 and II) 1976, applied on hacked/ uneven background such as bare brick/ block/ RCC work on walls and ceiling at all floors and locations,excluding in wall which may come in contact with dampness finished in smooth line and level etc. complete. sqm

709 Extra for addition of synthetic Polyester triangular fibre of length 6mm, effective diameter 10-40 microns and specific gravity of 1.34 to 1.40 in cement plaster/mortar by using 125gms. Of synthetic Polyester triangular fibre for 50 Kgs. cement used in cement mortar as per directions of Engineer-in-Charge. per bag of 50 kg cement

710 Providing and fixing mesh in vertical and horizontal junction of RCC and brick/AAC work including scaffolding and all lead and lift etc. complete

13.27.1 G.I. chicken mesh as per ISI specification and in the required width with 50mm long Bombay nails before plastering upt 10 meter height. Sqm

13.27.2 Providing and fixing fibre mesh of 145 GSM weight in required width with cement mortar before plastering upto 10m height. Sqm 45.00

711 12 mm thick plain cement mortar bands in cement mortar 1:4 (1 cement : 4 sand) :

13.28.1 Flush Band cm per m

13.28.2 Sunk Band cm per m

13.28.3 Raised Band cm per m

13.28.4 Moulded Band cm per m

712 18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 sand):

13. 29.1 Flush Band cm per m

13. 29.2 Sunk Band cm per m

13. 29.3 Raised Band cm per m

13. 29.4 Moulded Band cm per m

713 18 mm thick moulded cement mortar band in two coats under layer 12mm thick with cement mortar 1:5 (1 cement : 5 sand) top layer 6mm thick with cement mortar 1:4(1 cement : 4 sand). cm per m

714 Pointing on brick work or brick flooring with cement mortar 1:3(1cement:3 sand) :

13.31.1 Flush / Ruled/ Struck or weathered pointing. sqm

13.31.2 Raised and cut pointing sqm

13.31.3 Sunk pointing sqm

715 Pointing on stone work with cement mortar 1:3 (1 cement: 3 sand).

13.32.1 Flush/ Ruled pointing sqm

13.32.2 Raised and cut pointing sqm

716 Raised and cut pointing on stone work in white cement mortar 1:3 (1 white cement : 3 marble dust) sqm

717 Pointing on stone slab ceiling with cement mortar 1:2 (1 cement : 2 sand): Flush/ Ruled pointing sqm

718 Extra for pointing on walls on the outside/inside at height more than 10 metre from ground/floor level for every additional height of 3 m or part there of. sqm

719 Providing and fixing broken glass in cement mortar 1.3 including cost of mortar, over compound walls. sqm

720 Providing and fixing writing board green writing with chalk (regular modified polyster coated steel surface). of sizes.

13.37.1 size 1200mmx1800mm each

13.37.2 size 1200mmx2400mm each

13.37.3 size 1200mmx3000mm each

721 Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete sqm

722 Plaster of paris punning

13.39.1 Providing and applying plaster of paris punning of 10 mm average thickness over plastered surface to prepare the surface even and smooth complete. sqm

13.39.2 Extra for making 12mm flute grove with6 mm depth to prepare the surface even and smooth complete. metre

723 Extra for lining out plaster to imitate stone or concrete blocks walling. sqm

724 Providing and applying white cement based putty of average thickness 1 mm, of approved brand over the plastered wall surface to prepare the surface even and smooth i/c all cost of material, labour and scaffold etc in all position complete. Note : Putty shall be applied only on the internal walls, for application on the exterior walls prior permission of APD/Chief Engineer will be required. sqm

725 Providing and applying special putty in two coats based materials varnish, Belgium chalk, turpentine oil, white paint, safeda including sand papering for making the surface smooth for applying any or vinyl paints including all cost of material and labouretc complete. sqm

726 White washing with lime to give an even shade: New work (three or more coats) sqm

727 Colour washing such as green, blue or buff to give an even shade: New work (two or more coats) with a base coat of white washing with lime. sqm

728 Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound) content less than 50 grams/ltr of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coat on new work. sqm

729 Wall painting by any mechanical or manual means with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work sqm

730 Distempering by any mechanical or manual means with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

13.47.1 One coat. sqm

13.47.2 Two coats. sqm

731 Wall painting by any mechanical or manual means with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.

13.48.1 One coat. sqm

13.48.2 Two coats. sqm

732 Wall painting by any mechanical or manual means with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre. of approved brand and manufacture, including applying additional coats wherever required to achieve even shade. sqm

733 Finishing walls by any mechanical or manual means with water proofing cement paint of required shade: New work (Two or more coats applied @ 3.84 kg/10 sqm). sqm

734 Finishing walls by only mechanical or manual means with textured exterior paint of required shade: New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm. sqm

735 Finishing walls by any mechanical or manual means with Acrylic Smooth exterior paint (Economy Exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface sqm

736 Finishing walls by any mechanical or manual means with Premium Acrylic Smooth exterior paint (Premium exterior) of required shade including all scaffolding. New work (Two or more coat applied @1.67ltr/10sqm over and including one coat undiluted exterior waterproofing coating @ 2.39 litre/10 sqm with crack bridging ability of upto 0.5mm on horizontal surfaces with an elongation of 150% and water proofing of upto 3 bars on vertical surface) sqm

737 Finishing walls by any mechanical or manual means with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :

13.54.1 Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture sqm

13.54.2 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture. sqm

13.54.3 Two or more coats applied on walls @ 1.25 ltr/10 sqm. Over and including one coat of Special primer applied @ 0.75 ltr / 10 sqm. sqm

738 Painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces:

13.55.1 One coat sqm

13.55.2 Two coats sqm

739 Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.

13.56.1 On steel work sqm

13.56.2 On concrete work sqm

740 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution. sqm

741 Applying a coat of mordant solution on G.S. sheet :

13.58.1 With a solution of 38 gms of copper acetate in a litre of soft water sqm

13.58.2 With a solution made of 13 gms of hydrochloric acid in a solution of 13 gms each of copper chloride, copper nitrate and ammonium chloride dissolved in a litre of soft water. sqm

742 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint approved brand and manufacture over and including a priming of ready mixed zinc chromate yellow primer on new work :

13.59.1 75 mm diameter pipes meter

13.59.2 100 mm diameter pipes meter

13.59.3 150 mm diameter pipes meter

743 Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work.

13.60.1 75 mm diameter pipes meter

13.60.2 100 mm diameter pipes meter

13.60.3 150 mm diameter pipes meter

744 Painting with oil type wood preservative of approved brand and manufacture: New work (two or more coats) sqm

745 Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5 sqm per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant. sqm

746 Coal tarring two coats on new work using 0.16 and 0.12 litre coal tar per sqm in the first coat and second coat respectively. sqm

747 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work. sqm

748 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. sqm

749 Painting with synthetic enamel paint, having VOC (Volatile Organic Compound) content less than 150 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour.

13.66.1 One coat. sqm

13.66.2 Two coats. sqm

750 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content.

13.67.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre. sqm

13.67.2 With ready mixed red oxide zinc chromatic on steel/ iron works having VOC content less than 250 grams/litre. sqm

13.67.3 With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. sqm

751 Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work. sqm

752 Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work. sqm

753 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: Two or more coats on new work. sqm

754 Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work sqm

755 Varnishing with varnish of approved brand and manufacture:

13.72.1 Two or more coats of glue sizing with copal varnish over an under coat of flatting varnish. sqm

13.72.2 Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. sqm

756 French spirit polishing: Two or more coats on new works including a coat of wood filler. sqm

757 Polishing on wood work with ready mixed wax polish of approved brand and manufacture: New work. sqm

758 Lacqer polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying lacqer polish with air compressor. Two or more coats on new works including a coat of wood filler. sqm

759 Mealamine polishing on door windows by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying mealamine polish with air compressor. Two or more coats on new works including a coat of wood filler. sqm

760 Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture. sqm

761 Lettering with black Japan paint of approved brand and manufacture. per letter per cm height

762 Providing and applying flakes textured homogeneous wall finishing system consisting of a two component system of dry flakes (9.5kgs per/pack) made of a special grade of heat treated China clay with rigid homopolymer coated with fade resistant pigments and a 100% acrylic polymer Bonding agent (5kgs/pack) applied thickness of the coating being between 0.8-1.2mm, to be applied in single coat, on a cured, smooth level plaster surface without keying, as per the shades/ combinations approved, as per manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per direction/ supervision of the engineers-in-charge inclusive of one coat of primer on the base at all heights etc all complete. sqm

763 Providing and applying Granules homogeneous wall finishing system consisting of a two component system of dry granules (25 kgs/pack) made of 92% silica particles coated with fade resistant pigments and a 100% acrylic Polymer Bonding agent (5 kgs/pack) with the applied thickness of coating as required to be applied in single coat, on a cured. Smooth level plaster surface without keying as per the shades/combinations approved. As per the manufacturers directions for usage, to be applied by approved applicator of manufacturer, as per the directions/supervision of engineers in charge, all complete inclusive of primer on the base.

13.80.1 0.8-1.2mm thickness sqm

13.80.2 2.0-2.5mm thickness sqm

763 Providing and Applying Roto Wall finishing system being a dispersion of inorganic fillers, calcite, pure silica, quartz and broad spectrum fungicides stabilized by an acrylic co-polymer, to be applied by means of customized trowels (one for incorporating material on base and spreading and other for finishing) in single coat with a coating thickness of 2.0-2-2.5mm on a cured smooth level plaster without keying, by the approved applicator of manufacturer, of the approved shade as per directions for usage all inclusive including primer coat on the base. sqm

764 Providing and plastering over AAC masonary wall with polymer modified cement based readymix factory controlled mortar with self curing, eco- friendly, wet premix in a mechanical mixer in thickness as specified below, and covering area of 2.04 kg per sqm/mm thickness. The Bulk density of ready mix plaster may vary from 1300 to 1600 Kg/cum, Water powder ratio (as per manufacture’s direction) may vary from 18-22 % by weight or as specified by the manufacturer and compressive strength may vary from 8-9 Mpa.

13.82.1 6 mm thick plaster for internal walls sqm

13.82.2 8 mm thick plaster for external walls exposed to weather. sqm

765 Providing and fixing including Designing and UV printing on aluminium composite material (ACM) sheet in different sizes with 720DPI (Dot per inch)

13.83.1 ACP sheet 2mm thick sqm

13.83.2 ACP sheet 3mm thick sqm

13.83.3 ACP sheet 4mm thick sqm

766 Providing and fixing including designing and UV printing on pvc foam sheet of different size with 720 DPI (Dot per inch)

13.84.1 PVC foam sheet 3.0 mm thick sqm

13.84.2 PVC foam sheet 5.0 mm thick sqm

13.84.3 PVC foam sheet 8.0 mm thick sqm

767 Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. sqm

768 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board (XPS) of required size over outer wall surface, complying with ASTM C 578 - type VI, having thermal conductivity of 0.0289 W/mK as per ASTM and Fire retardant property as per DIN 4102, Part 1. XPS insulation of thickness 50mm shall be placed over brushed, algae free and levelled external wall by connecting the ship-laps joints and fixed by the washer and Self-Tapping Screw of suitable length at each corner and at distance 75mm from the edge and bitumen shall be applied over the joints and G.I. Expanded Mesh (Barfi Jali) shall be fixed over XPS board by a Self- Tapping Screw of suitable length at the centre of the board and 15mm PCC shall be applied over the board (paint of suitable choice can be used), all as per the directions of Engineer-in-Charge. sqm

769 Providing and fixing 50 mm thick extruded polystyrene rigid insulation board of required size between cavity wall, complying with ISO 4898:2008 & ASTM C 578-08b - type VI, having thermal conductivity of 0.0289 W/m K as per ASTM C 578 (measured as per IS 3346), compressive strength of > 350 kPa listed as per ASTM D 1621, density of 34-36 kg/cum as per ASTM D 1622, water absorption < 1% by volume as per ASTM D 2842, oxygen index of 24.1 to 28.1 listed as per ASTM D 2863, cell size 0.4 mm of dia (max) as per ASTM D 3576. Fire retardant property as per DIN 4102, Part 1 of class B2 and as per ASTM E84 class A, fixed with suitable water based adhesive and fastener, complete in all respect as per the directions of Engineer-in-Charge. sqm

770 Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) sqm

771 Scrapping/sand papering of existing surface with the help of mechanized sanding machine (having mechanical vaccum machine with bag for dust collection to make surface even and smooth) as per direction of Engineer-in- Charge. sqm

772 Providing and applying 1 coat of Triple booster primer-resist dampness, efflorescence, alkali & at the same time improve top coat coverage by 15-20% @1.0 lt/ 10 sqm, which confirms certfication of IS 109/1968. It can be applied by Brush/ Spray Machine and the work shall be carried out as per secification& the direction of the Engineer-in-Charge. sqm

773 Finishing walls with water based anti- germ paint of with VOC < 50 g/l, that kills disease causing germs, teflon based washability and Anti fungal properties in two or more coats @ 1.08 ltr / 10 sqm over priming coat of interior primer applied @ 1.08 ltr / 10 sqm of required shade including removing of all dust complete as per direction of Engineer- in-Charge and submission of challans of materials on enquiry. sqm

774 Providing and applying in two coats of 250 micron thick each layer of epoxy coating on prepared surface (cost includes preparing the plastered surface smooth ready to receive epoxy coating) for operation theater walls in desired colour as per direction of Engineer-in-Charge sqm

775 Indian ethnic art painting such as tribal Art Pithora or warli/Gond or Bhil Painting on any wall surface ( interior or exterior) by using textured/smooth exterior/interior paint of approved brand or Manufacturer including preparation of surface and cost of all material labour and scaffolding etc. complete as per direction of Engineer-in-charge. sqm

776 Exposed Concrete is composed of a mix natural and mix elements portland cement, hardest earthen material, special additives, natural grains and special polymers to create external beauty, aesthetic value and heritage effects of concrete. thickness 4mm to 6mm.(payment for providing grooves shall be made separately)First coat:- Base coat Apply of Cementous ready mix coarse dark grey color material for making of groove, applied on smooth plaster surface with the thickness of 0.75mm to 1.5mm by trowel Second coat:-Apply of Cementous ready mix fine material, applied on plaster surface with the thickness of 2mm to 3mm by trowel. with or with out groves as per requirement and with 6mm groves (if grooves requires) with masking top of dark grey colour as per approved sample, for the complete satisfaction of architect/Engineer in charge. Third coat :- Protective clear top coat sealer (water based) applied by roller/sponge. sqm

777 Applying two coats of sealer (special silicate water based water repellent protector) with spray gun and allowing sufficient drying time for 1st coat and 2nd coat is allowed to dry for 8 to 12 hrs on exterior stone façade and stone jali.At an approximate coverage of 50 to 70 Sq.f./Ltr. sqm

778 Providing and applying plaster of Paris punning of 12 mm average thickness over plastered surface including 12mm flute grove with 6 mm depth to prepare the surface even and smooth complete. sqm

779 0.999 Extra rate in internal plastering work for every additional floors above ground floor (due to lifting of material, ,scaffolding and labour etc. complete)Note:- Applicable to item No. 13.1 to item No. 13.10 sqm

780 0.999 Providing and fixing of roller blinds / vertical blinds of washable fabric duly fixed with powder coated aluminum channel and clamps having nylon rope for manual operation of approved colour and company as per director by Engineer-In-Charge. Sqm

781 0.000 Providing and fixing of Wallpaper of approved design, colour, pattern, as per direction of Engineer-In-Charge including all material, labour, fixing and installation.

13.105.1 Standard pattern and design wallpaper Sqm

13.105.2 3D pattern and design wallpaper Sqm

13.105.3 Customize design wallpaper Sqm

782 0.9 Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq. metres and under including cutting the patch in proper shape, raking out sqm

joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50metres lead : With cement mortar 1:4 (1 cement : 4 sand).

783 0.9 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete including disposal of rubbish to the dumping ground within 50 meters lead :

14.2.1 Door chowkhats each

14.2.2 Window chowkhats each

14.2.3 Clerestory window chowkhats each

784 0.0 Fixing chowkhat in existing opening in brick / RCC wall with dash fasteners/ chemical fastener of appropriate size (3nos on each vertical member of door chowkhat and 2 nos. on each vertical member of window chowkhats) including cost of dash fasteners/ chemical fastener. each

785 0.0 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete to match existing surface i/c disposal of mulba/ rubbish as directed by Engineer- in-charge. For door/ window/ clerestory window. sqm

786 0.0 Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:

14.5.1 Float glass panes of thickness 4 mm sqm

14.5.2 Float glass panes of thickness 5.5 mm sqm

787 0.9 Renewing glass panes with now wooden fillets wherever necessary:

14.6.1 Float glass panes of thickness 4 mm sqm

14.6.2 Float glass panes of thickness 5.5 mm sqm

789 0.9 Renewing glass panes and refixing existing wooden fillets:

14.7.1 Float glass panes of thickness 4 mm sqm

14.7.2 Float glass panes of thickness 5.5 mm sqm

790 0.0 Supplying and fixing new wooden fillets wherever necessary:

14.8.1 2nd class teak wood fillets meter

14.8.2 Haldu/Bija/Kail wood fillets. meter

791 0.0 Renewal of old putty of glass panes (length). meter

792 Refixing old glass panes with putty and nails. sqm

793 Fixing old glass panes with wooden fillets (excluding cost of fillets). sqm

794 Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete. each

795 Replacing sand stone slabs in roofing laid in cement mortar 1:4 (1 cement : 4 sand) including necessary repairs and cement pointing with same mortar complete including disposal of rubbish to dumping ground within 50 metres of lead :

14.13.1 Red/ white sand stone slabs 30 to 50 mm thick. sqm

796 Renewing wooden battens in roofs, including making good the holes in wall and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead :

14.14.1 Sal wood battens. cum 80

797 Renewing wooden beams in roofs including making good the holes in walls and painting with oil type wood preservative of approved brand and manufacture complete including removal of rubbish to the dumping ground within 50 metres lead :

14.15.1 Not exceeding 4.00 metres in length.

14.15.1.1 Sal wood beams cum

14.15.1.2 Haldu/Bija/Kail wood fillets. cum

14.15.2 Above 4.00 metres and upto 5.00 metres length.

14.15.2.1 Sal wood beams cum

14.15.2.2 Haldu/Bija/Kail wood fillets. cum

798 Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground within 50 metres lead. sqm

799 Taking out wind ties from roof including cutting out rusted bolts, nuts etc. and removing materials to any distance within compound and stacking. kg

800 Fixing of old wind tie with new fittings including painting two or more coats with anticorrosive bitumastic paint of approved brand and manufacturer over and including priming coat of ready mixed zinc chromate yellow primer of approved brand. meter

801 Renewing bottom rail and/or top runner of collapsible gate including making good all damages and applying priming coat of zinc chromate yellow primer of approved brand and manufacturer. kg

802 Renewing Wrought iron or M.S. Wheel or roller of steel door or gate and fitting and fixing the same with necessary clamps, nuts and bolts/welding and erection etc. complete.

14.20.1 Wheel 50 mm dia. and below. per wheel

14.20.2 Wheel above 50 mm dia. per wheel

803 Providing and fixing 25 mm thick shutters for cupboard etc. :

14.21.1 Panelled or panelled and glazed shutters :

14.21.1.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. sqm

14.21.1.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. sqm

14.21.2 Glazed shutters :

14.21.2.1 Superior class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. sqm

14.21.2.2 Ist class teak wood including nickel plated bright finished M.S. piano hinges with necessary screws. sqm

804 Providing and fixing plain jaffri door and window shutters including bright or/and black enamelled M.S. butt hinges with necessary screws 35x10mm laths placed 35mm apart (frames to be paid separately) including fixing 50x12mm beading complete with:

14.22.1 Second class teak wood. sqm

14.22.2 Hard wood, finger jointed sqm

805 Providing and fixing curtain rods of 1.25mm thick brass plates with two brass brackets fixed with brass screws and wooden plugs etc. wherever necessary complete.

14.23.1 20 mm diameter. meter

14.23.2 25 mm diameter. meter

806 Providing and fixing M.S. round or square bars with M.S. flats at required spacing in wooden frames of windows and clerestory windows. kg

807 Providing joists (karries) including hoisting fixing in position and applying wood preservative on unexposed surface etc. complete with:

14.25.1 Sal wood. cum

14.25.2 Haldu/Bija/Kail wood. cum

808 White washing with lime old work to give an even shade :

14.26.1 two or more coats sqm

14.26.2 one or more coats sqm

809 Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. sqm

810 Distempering with dry distemper of approved brand and manufacture (one or more coats) and of required shade on old work to give an even shade. sqm

811 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: Old work (one or more coats). sqm

812 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. sqm

813 Painting on G.S. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Old work (one or more coats). sqm

814 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture on old work :

14.32.1 75 mm diameter pipes meter

14.32.2 100 mm diameter pipes meter

14.32.3 150 mm diameter pipes meter

815 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with aluminium paint of approved brand and manufacture on old work :

14.33.1 75 mm diameter pipes meter

14.33.2 100 mm diameter pipes meter

14.33.3 150 mm diameter pipes meter

816 Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work :

14.34.1 75 mm diameter pipes meter

14.34.2 100 mm diameter pipes meter

14.34.3 150 mm diameter pipes meter

817 Painting with oil type wood preservative of approved brand and manufacture: Old work (one or more coats) sqm

818 Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work. sqm

819 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. sqm

820 Painting with aluminium paint of approved brand and manufacture to give an even shade: One or more coats on old work. sqm

821 Painting with acid proof paint of approved brand and manufacture of required colour to give an even shade: One or more coats on old work. sqm

822 Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade: One or more coats on old work. sqm

823 French spirit polishing: One or more coats on old work. sqm

824 Mealamine polishing on wood work by preparing the surface applying putty base course. Prepare the surface smooth by sand papering and then applying Mealamine polish with air compressor. One or more coats on old work. sqm

825 Lacquer polishing on wood work by preparing the surface applying putty base course. prepare the surface smooth by sand papering and then applying Lacquer polish with air compressor

14.43.1 One or more coats on old work. sqm

826 Polishing on wood work with readymade wax polish of approved brand and manufacture :

14.44.1 Old work sqm

827 Re-lettering with black Japan paint of approved brand and manufacture. per letter per cm height

828 Painting (one or more coats) with black Japan paint of approved brand and manufacture to give an even shade. sqm

829 Providing and fixing C.P. brass chain and rubber plug complete for sink or wash basin :

14.47.1 32 mm dia each

14.47.2 40 mm dia each

830 Distempering with 1st quality acrylic washable distemper (ready mixed) of approved manufacturer and of required shade and colour complete. As per manufacturer's specification. One or more coats on old work. sqm

831 Finishing walls with water proofing cement paint of required shade :

14.49.1 Old work (one or more coats applied @ 2.20 kg/10 sqm) over priming coat of primer applied @ 0.80 liters/10 sqm complete including cost of Priming coat. sqm

14.49.2 Old work (one or more coats @ 2.20 kg/10 sqm) complete. sqm

832 Finishing walls with textured exterior paint of required shade :

14.50.1 Old work (Two or more coats on existing cement paint surface applied @ 3.28 ltr/10 sqm. sqm

14.50.2 Old work (One or more coats) applied @ 1.82 ltr/10 sqm. sqm

833 Finishing walls with Acrylic Smooth exterior paint of required shade :

14.51.1 Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). sqm

14.51.2 Old work (One or more coat applied @ 0.90 ltr/10 sqm). sqm

834 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade

14.52.1 Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. sqm

14.52.2 Old work (one or more coats applied @ 0.83 ltr/10 sqm). sqm

835 Finishing walls with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications :

14.53.1 One or more coats applied on walls @ 0.85 ltr/10 sqm. sqm

14.53.2 Painting wood work with Deluxe Multi Surface Paint of required shade. One or more coat applied @0.70 ltr/10 sqm sqm

14.53.3 Painting Steel work with Deluxe Multi Surface Paint to give an even shade. One or more coat applied @0.70 ltr/10 sqm. sqm

836 Varnishing with varnish of approved brand and manufacture:

14.54.1 One or more coats with copal varnish. sqm

14.54.2 One or more coats with spar varnish. sqm

837 Melamine polishing on wood work (one or more coat). Old work sqm

838 Varnishing with flatting varnish of approved brand and manufacture one or more coats on old work. sqm

839 Floor painting with floor enamel paint of approved brand and manufacture of required colour to give an even shade. One or more coat on old work. sqm

840 40 mm thick stone flooring over 20 mm (average)thick base of cement mortar 1:5 (1 cement : 5 sand) including pointing with cement mortar 1:2 (1 cement : 2 sand) with an admixture of pigment to match the shade of stone. Red sand stone / White sand stone) stone to be supplied by the department.

14.58.1 Rough chiseled dressed stone sqm

14.58.2 Fine dressed stone sqm

841 Coursed rubble masonry (second sort) with hard stone in Cement mortar 1:6 (1 cement : 6 sand) (Stone shall be supplied by the department) cum

842 Laying old cement concrete interlocking paver blocks of any design/shape laid in required line, level, curvature, colour and pattern over and including 50mm thick compacted bed of sand, filling the joints with sand etc. all complete as per the direction of Engineer-in-charge. (Old CC paver blocks shall be supplied by the department free of cost). sqm

843 Laying at or near ground level old kerb stones of all types in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 sand) including making joints with or without grooves (thickness of joints, except at sharp curve, shall not be more than 5mm) including making drainage opening wherever required etc. complete as per direction of Engineer-in- charge. (Length of finished kerb edging shall be measured for payment). (Old kerb stones shall be supplied by the department free of cost). meter

844 Colour washing with lime to give an even shade:

14.62.1 (one or more coats) sqm

14.62.2 (two or more coats) sqm

845 Conducting adequate no's. of scanning to detect the steel reinforcement in existing RCC elements by using ground/ Wall penetrating radar system to avoid the cutting of Main bars during drilling for inserting bolts etc. complete. sqm

846 Chipping, Removing, Carefully loose plaster and Concrete work by low impact Hammer, Breaker without damaging the structure as Instructed by Engineer-in-Charge. sqm

847 Rebaring ofTM bars bydrilling hole &embedding bars of different diameter using epoxy grouting compound including all tools and tackles complete

14.70.1 8 mm dia bar 10 mm dia hole Per 100 mm

14.70.2 10 mm dia bar 12 mm dia hole Per 100 mm

14.70.3 12 mm dia bar 16 mm dia hole Per 100 mm

14.70.4 16 mm dia bar 20 mm dia hole Per 100 mm

14.70.5 20 mm dia bar 25 mm dia hole Per 100 mm

14.70.6 25 mm dia bar 32 mm dia hole Per 100 mm

14.70.7 32 mm dia bar 40 mm dia hole Per 100 mm

848 Providing and fixing chromium plated brass butt hinges with necessary chromium plated brass screws etc. complete.

14.71.1 125x70x4 mm (ordinary type) each

14.71.2 100x70x4 mm (ordinary type) each

14.71.3 75x65x4 mm (heavy type) each

14.71.4 75x40x2.5 mm (ordinary type) each

14.71.5 50x40x2.5 mm (ordinary type) each

849 Providing and fixing 85x42 mm chromium plated brass pull bolt lock with necessary chromium plated brass screws, nuts, bolts and washers etc. complete. each

850 Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. sqm

851 Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of f tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in- Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) litre

852 Cleaning and desilting of gully trap chamber, including removal of rubbish mixed with earth etc. and disposal of same, all as per the direction of Engineer- incharge. each

853 Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge

14.76.1 75mm average thikness sqm

14.76.2 50mm average thikness sqm

14.76.3 25mm averge thikness sqm

854 Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.

14.77.1 Bars upto 12 mm diameter metre

14.77.2 Bars above 12 mm diameter metre

855 Drilling suitable holes in reinforced or plain cement concrete with power driven drill machine to a minimum depth of 100mm upto 200mm in RCC beams, lintels, columns and slabs to introduce steel bars for sunshades/balconies including fixing the steel bars in position using epoxy resin anchor grout of approved make but excluding the cost of reinforcement, all complete as per direction of Engineer-In-Charge.

14.78.1 Upto and including 12mm dia metre

856 Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer-In-charge complete in all respect.

14.79.1 SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved sqm

14.79.2 Epoxy bonding adhesive having coverage 2.20 sqm/kg ofapproved make sqm

857 Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment underthis item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2)

12 mm average thickness sqm

25 mm average thickness in 2 layers. sqm

50 mm average thickness in 3 layers. sqm

858 Providing and injecting approved grout in proportion recommended by the manufacturer into cracks/honey-comb area of concrete/masonry by suitable gun/ pump at required pressure including cutting of nipples after curing etc. complete as per directions of Engineer-in-Charge. (The payment shall be made on the basis of actual weight of approved grout injected.)

14.83.1 Stirrer mixed Acrylic Polymer of approved make @ 2% of weight of cement used) modified Cement slurry made with non shrink compound in concrete/RCC work kg

14.83.2 Stirrer mixed SBR Polymer (of approved make) modified Cement slurry made with Shrinkage Compensating Cement in concrete/RCC work. kg

14.83.3 Epoxy injection grout in concrete/RCC work of approved make kg

859 Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge. sqm

860 Providing and fixing hard drawn steel wire fabric of size 75 x25 mm mesh or other suitable size wire mesh to be fixed & firmly anchored to the concrete surface by means of "L" shaped mild steel shear key welded with existing reinforcement including the cost of materials, labour, tool & plants sqm

as approved by Engineer-incharge.

861 0.9 Demolishing lime concrete manually/by mechanical means and disposal of material within 50 metres lead as per direction of Engineer-in-Charge. cum

862 0.9 Demolishing cement concrete manually/by mechanical means including disposal of material within 50 metres lead as per direction of Engineer-in- Charge.

15.2.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix). cum

15.2.2 Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix). cum

863 0.0 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge. cum

864 0.0 Extra for cutting reinforcement bars manually/ by mechanical means in R.C.C. work (Payment shall be made on the cross sectional area of R.C.C. work) as per direction of Engineer-in- Charge. sqm

865 0.0 Extra for scrapping, cleaning and straightening reinforcement from R.C.C. work. kg

866 0.9 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge.

15.6.1 In lime mortar with old mughal bricks. cum

15.6.2 In lime mortar. cum

15.6.3 In cement mortar. cum

867 Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured) :

15.7.1 From brick work in lime mortar. 1000 nos

15.7.2 From brick work in cement mortar. 1000 nos

868 Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- Charge:

15.8.1 In lime mortar. cum

15.8.2 In cement mortar. cum

869 Dismantling dressed stone work ashlar face stone work, marble work or precast concrete work manually/ by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge:

15.9.1 In lime mortar. cum

15.9.2 In cement mortar. cum

870 Removing mortar from and cleaning stones and concrete articles (net quantity of stacks of cleaned materials will be measured) :

15.10.1 In lime mortar. cum

15.10.2 In cement mortar. cum

871 Dismantling tile/ Kota stone/ Marble / Granite work in floors/walls and roofs laid in cement mortar including stacking material within 50 metres lead.or thickness of tiles 10 mm to 25 mm.

15.11.1 For thickness of tiles 10 mm to 25 mm. sqm

15.11.2 For thickness of tiles above 25 mm and upto 40 mm. sqm

872 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. sqm

873 Taking out existing CC interlocking paver blocks from footpath/ central verge, including removal of rubbish etc., disposal of unserviceable material to the dumping ground for which payment shall be made separately and stacking of serviceable material within 50 metre lead as per direction of Engineer-in-Charge. sqm

874 Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :

15.14.1 Of area 3 sq. metres and below. each

15.14.2 Of area beyond 3 sq. metres. each

875 Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead:

15.15.1 Of area 3 sq. metres and below. each

15.15.2 Of area beyond 3 sq. metres. each

876 Dismantling wood work in frames, trusses, purlins and rafters upto 10 metres span and 5 metres height including stacking the material within 50 metres lead:

15.16.1 Of sectional area below 40 square centimetres. metre

15.16.2 Of sectional area 40 square centimetres and above. cum

877 Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional span of one metre or part thereof beyond 10 metres :

15.17.1 Of sectional area below 40 square centimetres. metre per metre span

15.17.2 Of sectional area 40 square centimetres and above. cum per metre span

879 Extra for dismantling trusses, rafters, purlins etc. of wood work for every additional height of one metre or part thereof beyond 5 metres :

15.18.2 Of sectional area below 40 square centimetres. mtr/ mtr span

15.18.1 Of sectional area 40 square centimetres and above. mtr/ mtr span

880 Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in:

15.19.1 R.S. Joists kg

15.19.2 Channels, angles, tees and flats kg

881 Dismantling steel work in built up sections with span upto 10 meter and hieght 5 meter in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50metres lead. kg

882 Dismantling steel work manually/ by mechanical means in built up sections with span upto 10 meter and hieght 5 meter without dismembering and stacking within 50 metres lead as per direction of Engineer-in-Charge. kg

883 Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional span of one metre or part thereof beyond 10 metres kg per metre span

884 Extra for dismantling trusses, rafters, purlins etc. of steel work for every additional height of one metre or part thereof beyond 5 metres. kg per metre height

885 Extra for marking of structural steel work required to be re- erected. kg

886 Removal of old Tarfelt i/c disposal as directed by Engineer in charge. per sqm

887 Demolishing brick tile covering in terracing including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. sqm

888 Dismantling roofing including ridges, hips valleys and gutters etc., and stacking the material within 50 metres lead of:

15.27.1 G.S. Sheet sqm

15.27.2 Asbestos/ Non asbestors sheet sqm

889 Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately) including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. cum

890 Dismantling tiled roofing with battens boarding etc. complete including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. sqm

891 Dismantling wooden ballies in posts and struts including stacking within 50 metres lead. metre

892 Dismantling and stacking within 50 metres lead, fencing posts or struts including all earth work and dismantling of concrete etc. in base of :

15.31.1 T’ or ‘L’ iron or pipe each

15.31.2 R.C.C. each

893 Cutting ballies or wooden posts of fencing at the point of projection above the concrete or ground and stacking the same within 50 metres lead. each

894 Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead. kg

895 Dismantling wooden trellis work excluding frames but including stacking the serviceable material within 50 metres lead. sqm

896 Dismantling expanded metal or I.R.C. fabrics with necessary battens and beading including stacking the serviceable material within 50 metres lead. sqm

897 Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 metres lead :

15.36.1 Upto 10 mm thick sqm

15.36.2 Thickness above 10 mm upto 25 mm sqm

15.36.3 Thickness above 25 mm upto 40 mm sqm

898 Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 metres lead:

15.37.1 Thickness upto 40 mm sqm

15.37.2 Thickness above 40 mm upto 75 mm sqm

899 Dismantling cement asbestos or other hard board ceiling or partition walls including stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. sqm

900 Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :

15.39.1 75 to 80 mm dia pipe. metre

15.39.2 100 mm dia pipe metre

15.39.3 150 mm dia pipe metre

901 Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-Charge :

15.40.1 15 mm to 40 mm nominal bore metre

15.40.2 Above 40 mm nominal bore metre

902 Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means, breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes and lead at site within 50 metre lead as per direction of Engineer-in-Charge: metre

15.41.1 Upto 150 mm diameter metre

15.41.2 Above 150 mm dia upto 300 mm dia. metre

15.41.3 Above 300 mm diameter metre

903 Taking out C.I. cover with frame from R.C.C. top slab of manholes of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. each

904 Taking out C.I. cover with frame from R.C.C. top slab of inspection chambers of various sizes including demolishing of R.C.C. work manually/ by mechanical means and stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead as per direction of Engineer-in- Charge. each

905 Dismantling of road gully chamber of various sizes including C.I. grating with frame including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead including refilling the each

906 Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. each

907 Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres

15.46.1 Upto 150 mm diameter each

15.46.2 Above 150 mm diameter each

908 Dismantling of spindle fire hydrant including stacking of useful materials within 50 metres lead. each

909 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. sqm

910 Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus sqm

material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-Charge.

911 Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps:

15.50.1 100 mm diameter metre

15.50.2 150 mm diameter metre

15.50.3 200 mm diameter metre

15.50.4 250 mm diameter metre

15.50.5 300 mm diameter metre

15.50.6 350 mm diameter metre

15.50.7 400 mm diameter metre

15.50.8 440 mm diameter metre

912 Dismantling of manhole including R.C.C. top slab, C.I. cover with frame including stacking of useful materials near the site and disposal of unserviceable materials into municipal dumps within 50 m lead :Rectangular manhole 90x80 cm and 45 cm deep

15.51.1 Rectangular manhole 90x80 cm and 45 cm deep each

15.51.2 Rectangular manhole 120x90 cm and 90 cm deep. each

15.51.3 Rectangular arch type manhole 140x90cm and 2.45m deep. each

15.51.4 Circular manhole 122 cm diameter and 1.68 m deep each

913 Extra for depth of manholes dismantled:

15.52.1 Rectangular manhole 90x80 cm and beyond 45 cm depth. metre

15.52.2 Rectangular manhole 120x90 cm and beyond 90 cm depth. metre

15.52.3 Rectangular arch type manhole 140x90 cm and beyond 2.45m deep (upto 4.25 m depth). metre

15.52.4 Circular manhole 122 cm diameter and beyond 1.68 m deep (upto 2.29 m depth). metre

914 Taking out existing kerb stones of all types from footpath/ central verge, including removal of mortar etc., disposal of unserviceable material to the dumping ground and stacking of serviceable material within 50 metre lead as per direction of Engineer-in- Charge. metre

915 Demolishing dry brick pitching in floors, drains etc. including stacking of serviceable material and disposal of unserviceable material within 50 metres lead : cum

916 Demolishing mud phaska in terracing and disposal of material within 50 metres lead. cum

917 Dismantling jack arch roofing and floors including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. Sqm

918 Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge. cum

919 Dismantling manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in- charge :Bituminous road. 15.58

15.58.1 Water bound macadam road sqm

15.58.2 Bituminous road sqm

920 Dismantling steel cylinder R.C. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within 50 metres lead as per direction of Engineer-in-charge :

15.59.1 Up to 600 mm diameter per metre

15.59.2 Above 600 mm diameter per metre

921 Dismantling asbestos cement pressure pipes including excavation and refilling trenches after taking out the pipes manually/ by mechanical means and stacking the pipes within 50 metres lead as per direction of Engineer-in-charge

15.60.1 Up to 150 mm diameter per metre

15.60.2 Above 150 mm diameter per metre

922 Dismantling of R.C.C. spun vent shaft including excavating the cement concrete pit completely, taking out the shaft, refilling the excavated gap, stacking the useful materials near the site and disposal of unserviceable each

materials within 50 metres lead.

923 Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead:

15.62.1 120 x 120 cm (outside to outside) each

15.62.2 210 x 120 cm (outside to outside) each

924 Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material up to a lead of 1 kilometre, as per direction of Engineer-in- charge. cum

925 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. cum

926 0.0 Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100mm sand cast Iron P or S trap, UPVC P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :

17.1.1 White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. each

17.1.2 Stainless Steel AISI-304(18/8) Orissa pattern W.C. pan of size 585x480 mm with flush pipe and integrated type foot rests. each

927 0.9 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid each

17.2.2 W.C. pan with ISI marked black solid plastic seat and lid each

17.2.3 Providing and fixing AISI-304 (18/8) European type WC instead of white vitreous china pedestal type water closet. each

928 0.0 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern and C.P. flush bend with fittings and C.I.brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

17.3.1 W.C. pan with ISI marked white solid plastic seat and lid. each

17.3.2 W.C. pan with ISI marked black solid plastic seat and lid. each

929 0.9 (mailto:[email protected]塹ᴻ䡿ⲯ嶂藄挧ꮥ) each

level flushing cistern with fitting and brackets, 40mm flush bend, 20mm over flow pipe, with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required White vitreous china dual purpose WC pan with white solid plastic seat and lid with 10 liter low level flushing cistern i/c C.P. flush bend.

930 0.0 Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/6 litre (adjustable to 4 litre/8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. each

931 0.0 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265 mm sizes

respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

17.6.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern. each

17.6.2 Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern. each

17.6.3 Range of three urinal basins with10 litre white P.V.C.automaticflushing cistern. each

17.6.4 Range of four urinal basins with 10litre white P.V.C.automatic flushing cistern. each

932 0.9 Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and cutting and making good the walls and floors wherever required.

17.7.1 Single half stall urinal with 5 litre P.V.C. automatic flushing cistern. each

17.7.2 Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern. each

17.7.3 Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern. each

17.7.4 Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern. each

933 0.0 Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I. / PVC flush pipe for back and front flush with standard spreader pipes with fittings, G.I clamps and C.P. brass coupling complete including painting of fittings and cutting and making good the walls and floors etc. wherever required :

17.8.1 Single squatting plate with 5 litre P.V.C. automatic flushing cistern. each

17.8.2 Range of two squatting plates with 5 litre P.V.C. automatic flushing cistern. each

17.8.3 Range of three squatting plates with 10 litre P.V.C. automatic flushing cistern. each

17.8.4 Range of four squatting plates with 10 litre P.V.C. automatic flushing cistern. each

934 0.9 Providing and fixing white vitreous china water less urinal of size 600x330x315 mm having antibacterial /germs free ceramic surface, fixed with cartridge having debris catcher and hygiene seal. each

935 Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre and post flushing with water ( 250 ml and 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-Charge. each

936 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require :

17.11.1 White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps. each

17.11.2 White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap. each

17.11.3 White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps. each

17.11.4 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap. each

17.11.5 White Vitreous China Angle back wash basin size 600x480 mm with single 15 mm C.P. brass pillar tap. each

17.11.6 White Vitreous China Angle back wash basin size 400x400 mm with single 15 mm C.P. brass pillar tap. each

17.11.7 White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap. each

17.11.8 White Vitreous China Surgeon type wash basin of size 660x460 mm with a pair of 15 mm C.P. brass pillar taps with elbow operated lever ISI marked. each

17.11.9 White Vitreous China Surgeon type wash basin of size 660x460 mm with single 15 mm C.P. brass pillar taps with elbow operated levers ISI marked. each

17.11.10 Oval shape wash basin over counter /under counter with 15 mm C.P brass pillar tap (Counter to be paid sepratly). each

17.11.11 Stainless Steel AISI-304(18/8) Round basin 405x355 mm with single 15 mm C.P. brass pillar tap each

17.11.12 Stainless Steel AISI-304(18/8) Wash basin 530x345 mm with single 15 mm C.P. brass pillar tap. each

937 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. each

938 Providing and fixing kitchen sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P. brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required : White glazed fire clay kitchen sink of size 600x450x250 mm. each

939 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :

17.14.1 Kitchen sink with drain board

17.14.1.1 510x1040 mm bowl depth 250mm. each

17.14.1.2 510x1040 mm bowl depth 225mm. each

17.14.1.3 510x1040 mm bowl depth 200mm. each

17.14.1.4 510x1040 mm bowl depth 178mm. each

17.14.2 Kitchen sink without drain board

17.14.2.1 610x510 mm bowl depth 200 mm. each

17.14.2.2 610x460 mm bowl depth 200 mm. each

17.14.2.3 470x420 mm bowl depth 178 mm. each

940 Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug 40mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete including painting of fittings and brackets, cutting and making good the wall wherever required :

17.15.1 Size450x300x150mm each

17.15.2 Size600x450x200mm each

941 Providing and fixing White glazed fire clay draining board of size 600x450x25mm with C.I. brackets including painting of brackets, cutting and making good the walls wherever required. each

942 Providing and fixing white vitreous china water closet squatting pan (Indian type)

17.17.1 Long pattern W.C. pan of size 580 mm each

17.17.2 Orissa pattern W.C. pan of size 580x440 mm each

943 Extra for using coloured W.C. pan instead of white W.C. pan Orissa pattern W.C. pan 580x440 mm each

944 Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. each

945 Extra for using coloured pedestal type W.C pan (European type) with low level cistern of same colour instead of white vitreous china W.C pan and cistern. each

946 Providing and fixing a pair of white vitreous china foot rests of standard pattern for squatting pan water closet:

17.21.1 250x130x30 mm pair

17.21.2 250x125x25 mm pair

947 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete. 10 litre capacity

17.22.1 White each

17.22.2 coloured each

948 Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete.10 litre (full flush capacity)

17.23.1 White each

17.23.2 Coloured each

949 Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :

17.24.1 White each

17.24.2 Black each

17.24.3 Coloured (other than black and white) each