Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.5 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹32.5 L+₹2.0 L (6.53%)Rejected-Finance H NO 1346 SECTOR 13 P HISAR 125005 HARYANA | HISAR | HISAR | HARYANA | 125005 | L2 | Rejected-Finance Being other than L1 Bidder | |
| 3 | L3₹32.6 L+₹2.1 L (6.97%)Rejected-Finance HAPPY HOME FRIENDS COLONY RAMGARH CANTT RAMGARH JHARKHAND PIN 829122 | RAMGARH | JHARKHAND | 829122 | L3 | Rejected-Finance Being other than L1 Bidder | |
| 4 | L4₹34.6 L+₹4.1 L (13.4%)Rejected-Finance C 49 B RADHA GARDEN MEERUT 250001 UP | MEERUT | MEERUT | UTTAR PRADESH | 250001 | L4 | Rejected-Finance Being other than L1 Bidder | |
| 5 | L5₹39.9 L+₹9.4 L (30.8%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 Bidder |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
17 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 865 EWS
GE 865 EWS, PIN-913 865 C/o 56 APO
CERTAIN REPAIRS OF MISC BR WORKS PLINTH PROTECTION PCC WORKS AT SECTOR C AND D UNDER AGE BR I OF GE 865 EWS
2023_MES_590447_1
865/EWS(NIT-53)/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE 865 EWS
As per tender documents and as per policy in vogue
9 documents required · 9 mandatory
₹500
GE 865 EWS
₹90,000
Yes
14 Sept 2023
20 Apr 2023
24 May 2023
20 Apr 2023
17 May 2023
4 May 2023
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tile to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.
Demolition of bricks (laid flat or on edge) or interlocking tiles in floors, channels, kerbes, aprons, etc laid dry of laid dry and pointed.
Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) and Removing demolished material to a distance and depositing out site of MoD land Where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided for and removing debris outside the MoD land complete all as specified and directed by Engr-in-Charge
M&L Cement concrete 1:3:6 type C-1 using 20mm graded stone crushed aggregate in plinth protection, 75mm thick, finished even and smooth using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and as directed.
M&L for cement concrete 1:3:6 type C-2, (40mm graded crushed stone aggregate) 100 mm thick as in floors of hard standing and the like complete all as specified and as directed.
M&L for forming Contraction (Dummy) Joints 50 mm deep x 10 mm wide, filled with sealing compound grade A, complete all as specified and directed.
M&L for cement concrete 1:3:6 type C-1, (20mm graded crushed stone aggregate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc complete all as specified and as directed.
M&L for forming Contraction (Dummy) Joints 65 mm deep x 10 mm wide, filled with sealing compound grade A, complete all as specified and directed.
Vitrified ceramic tiles 10 mm thick (light shade) (square/ rectangular), first quality, polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 for laying floor tiles complete all as specified and directed.
M & L for joint free Non-Skid coloured Ceramic tiles, first quality, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes complete all as specified and directed.
M & L for joint free Non-Skid coloured Ceramic tiles, first quality, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed or bedding layer in Cement Mortar 1:6 for laying floor finishes complete all as specified and directed.
M&L for (350mm x 250mm x 7mm/450mm x 350mm x 7mm thick) coloured glazed ceramic tiles, first quality, set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments.(Note: Any disturbed surfaces shall be matched w/o any extra cost to the govt) including 10mm thck screed bed below tile for dado/skirting CM 1:4 complete all as specified and as directed.
M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as mass concrete and filling of foundation all as specified and directed.
M&L dressed granite or trap stone as in Kerb stones roughly squared stones of size 20cm x 30 cm, so that the maximum depression from a straight edge held against the dressed surface shall not exceed 6mm for top and exposed surfaces of sides and 20mm for the rest of surfaces jointed in CM 1:6 and struck finish (rate included for removal of old damaged kerb stones of any description) complete all as specified and as directed.
M&L for cement concrete 1:4:8 type D-2, (40mm graded crushed stone aggregate) 100 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc complete all as specified and as directed.
Machine pressed / vibro mechenically floated interlocking cement paver block ISI marked, any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 Grade, with topping of grey cement and pigment, laid over and including 50mm thick sand cushioning complete. Shape pattern of laying shall be approved by Engineer-in-charge.
Machine pressed / vibro mechenically floated interlocking cement paver block ISI marked, any shape and size conforming to IS 15658-2006 of 40mm thickness, M-35 Grade, with topping of grey cement and pigment, laid over and including 50mm thick sand cushioning complete. Shape pattern of laying shall be approved by Engineer-in-charge.
M&L for cement concrete 1:4:8 type D-2, (40mm graded crushed stone aggregate) 75 mm thick as in sub -floors ,sub- bases ,floors and pavings,etc complete all as specified and as directed.
M&L PCC 1:2:4, 25 mm thick type B0 (using 12.5 mm graded crushed stone aggregate) as in floor finished even and rough with out using extra cement complete all as directed by Engr-in-charge.
M&L Machine cut Kota stone slab flooring 20-25 mm thick laid over and including 20mm thick cement screed bed or bedding layer in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.
M&L for Chequred cement concrete tiles 30cm X 30cm X 20mm thick, set, pointed & jointed in neat cement slurry in floors polished with grey cement & pigments laid over and including 20mm thick cement screed base (1:6) and all as directed by Engr-in -Charge.
M&L for 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 20 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.
M&L for second class soft wood clean swan as in battens for grids of ceiling and lining, plain fillets exc 13 sqcm and n.exc 25 sqcm, square/ rectangular in section, secured with nails or brads to timber frame work including dismantlng fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in section complete all as directed.
M&L for second class soft wood clean swan as in beading for edges of ceiling, lining, wooden flooring work, plain fillets exc 6 sqcm and n.exc 13 sqcm, square/ rectangular in section , secured with nails or brads to timber frame work including dismantlng fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in section all as specified
M&L for decorative cover fillets of standard hard board 6mm thick, 40 mm wide, and fixing with screws in wall/ceiling including dismantlng fillets, rails, posts, rafters, purlins, grids for ceiling & wall panelling etc under 40 Sq.cm in section all as specified
M&L for 6mm thick venered decorated (knoty pine) ply wood (No of plys 05), grade I, with BWR resin with decorative face veneers on the face fixed with nails to timber frame work in stands, boards, partitions, shutters, as in wall and the like incluidng taking down old wall/ceiling board/ply wood complete all as specified and directed.
M&L for 6mm thick venered decorated (knoty pine) ply wood (No of plys 05), grade I, with BWR resin with decorative face veneers on the face fixed with nails to timber frame work in stands, boards, partitions, shutters, as in ceiling and the like incluidng taking down old wall/ceiling board/ply wood complete all as specified and directed.
9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in walls complete incluidng taking down old wall/ceiling board/ply wood all as specified and as directed by Engr-in-Charge.
9mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with nails to timber frame work as in ceiling complete incluidng taking down old wall/ceiling board/ply wood all as specified and as directed by Engr-in-Charge.
M&L French polishing on new wood or wood based surface of any width or girth or any description, including cleaning and preparing the surface including a coat of wood filler on new surface with two or more coats complete all as specified and as directed.
M&L for hard wood 2nd class factory made wooden boarded floors 10 mm thick and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets or as specified by manufacture including dismantling boarding / wooden flooring of any description, fixed in any positon all as specified and directed.
Taking down cement plaster of any description on brick or stone walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water remove dust, debries/rubbish etc, complete all as specified and as directed.
M&L for 15mm thick rendering on other than fair faces of brick works or stone masonary work in two layers 10 mm & 5 mm thick using water proofing compound for outer layer of 5mm thick finished even and smooth without using extra cement in cement mortar 1:4 complete all as specified and as directed Note : Liquid water proofing Admixture is deemed to be included in overall rates quoted against this item and qty of admixture shall be as per manufacturer's instructions. Make : Pidilite/Dr Fixit
M&L for 10mm thick rendering on fair faces of brick works finished even and smooth without using extra cement in cement mortar 1: 6 complete all as specified and as directed.
M&L for preperation of new concrete /plastered wall surface of any description, applying three coat of white wash complete all as specified and as directed
M&L for preperation of new concrete /plastered wall surface of any description,applying 2mm thick wall care putty and two coat of distemper oil emulsion over a coat of primer complete all as specified and as directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of cement based paint including curing before and after applying each coat complete all as specified and directed by Engr-in-charge.
Preparation of new or previously untreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed by Engineer-in-Charge.
M&L for two coats of synthetic enamel paint on new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Preparation of old wooden wall and ceiling boards surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.
Preparation of new or previously untreated surfaces of bricks, concrete walls and stone surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coat of priming paints plaster coat complete all as specified and directed by Engineer-in-Charge.
Preparation of old decorated surfaces of wood and wood based material, wall and ceiling surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-charge.
Preparation of old surfaces of walls by brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing, rubbing down and cleaning oil greasy spots etc and applying one coat of distempering with oil bound distemper white or any tinted on walls, filling gaps by putty after washing rubbing down and stopping of distermpered surfaces, complete all as specified and directed by Engr-in-charge.
Preparation of old surfaces of walls by brooming down with steel wire brushes, scrapping down smoke soot moulds moss and efflorescence salts washing, rubbing down and cleaning oil greasy spots etc and apply two coats of white wash to walls complete all as specified and directed by Engr-in-charge.
M&L for preperation of old plastered wall surface of any description and applying one coat of cement based paint including curing before and after applying each coat complete all as specified and directed by Engr-in-charge.
Dismantling chain link fencing or expanded metal or wiremesh of weight not exceeding 4.00 sqm, any type complete all as specified and as directed by the Engr-in-charge.
Dismantling wrought iron or mild steel work of any description not otherwise for complete all as spcecified and as directed.
Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles/concrete block walling complete all as specified and as directed by Engr-in-Charge.
M&L for pre cast cement concrete block masonary of 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) with soild blocks, exc.10cm in width, set and jointed in cement mortor 1:6 complete all as specified and directed.
M&L for pre cast cement concrete block masonary (except blocks) of 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) with soild blocks, using old concrete blocks obtained from the demolition, exc.10cm in width, set and jointed in cement mortor 1:6 complete all as specified and directed.
M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed.
Walling (Except stone) of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6, using old stones/boulders obtained from the demolition complete all as specified and as directed.
M & L extra over stone walling of lime or sand stone for hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc 40 mm deep, to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses complete all as specified and as directed.
Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified and directed.
Supply only mild steel Galvanised wire chain link fencing square mesh of any size made out of 4mm dia wire complete ll as specified & directed
M&L for hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
M&L for PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as mass concrete and filling of foundation all as specified and directed.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 metre and making good the disturbed grouind, in hard/dense soil, complete all as specified and directed by Engineer-in-Charge.
Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for and Removing demolished material to a distance and depositing out site of MoD land Where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed by Engineer-in-Charge.
M&L for providing precast cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate), as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar 1:6 complete with joints to match complete all as specified and as directed.
M&L for TMT mild steel bars, 10 mm dia and over, as in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia), complete all as specified and as directed by Engineer-in-charge.
Horizon Construction Company
M/S UNITED CONSTRUCTION CO.
M/S Praveen Kumar and Sons
SHUBHAM ENGINEERS & BUILDERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .