Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹35.2 LAccepted-AOC HIG 05 SECTOR G LDA COLONY KANPUR ROAD LUCKNOW 226012 | LUCKNOW | LUCKNOW | UTTAR PRADESH | 226012 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹36.3 L+₹39,940 (1.11%)Rejected-Finance 93 SARASWATI PURAM COLONY SG PGI LUCKNOW UP 226 014 | LUCKNOW | LUCKNOW | UP | 226014 | L2 | Rejected-Finance Being Higher Bidder | |
| 3 | L3₹37.3 L+₹1.4 L (3.89%)Rejected-Finance | L3 | Rejected-Finance Being Higher Bidder | |
| 4 | L4₹38.4 L+₹2.5 L (6.98%)Rejected-Finance C O BIPIN KUMAR VILL SATNAPUR POST BAHADURGANJ DISTT GHAZIPUR UP 275201 | BAHADURGANJ | GHAZIPUR | UTTAR PRADESH | 275201 | L4 | Rejected-Finance Being Higher Bidder | |
| 5 | L5₹39.4 L+₹3.5 L (9.76%)Rejected-Finance | L5 | Rejected-Finance Being Higher Bidder |
Tender Value
₹44 L
EMD Value
₹88,000
Closing Date
2 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE E/M Lucknow
Garrison Engineer E/M, 36 LBS Marg, Lucknow Cantt, Lucknow (U.P.) PIN 226002
SPECIAL REPAIR TO BLDG NO 108 AND 109 (JCOs SINGLE LIVING ACCN) ALONGWITH ATTACHED BATHROOM/TOILETS OF CH (CC) UNDER GE E/M LUCKNOW
2022_MES_522647_1
GE/EM/LKO/HOSP/T-26 OF 2022-2023
Open Tender
Miscellaneous Works
Item Rate
180 days
Lucknow
As per NIT
8 documents required · 8 mandatory
₹500
GE E/M Lucknow
₹88,000
Yes
18 Jun 2022
7 May 2022
4 Jun 2022
7 May 2022
2 Jun 2022
21 May 2022
60 days
Amount
Taking down chowkhats with shutters(without taking off) of any description exc 1.5 Sqm but nexc 4 Sqm each complete all as specified and directed.
Taking down chowkhats with shutters(without taking off) of any description nexc 1.5 Sqm complete all as specified and directed.
Taking down shutter of any description not exc. 01 sqm each and removing from site complete all as specified and directed.
Taking down shutter of any description exc. 1 sqm but n.exc 2 sqm each and removing from site complete all as specified and directed.
S&F steel windows with side hung shutters including hinges with steel handle, and steel peg stay, complete with and including both glazing and gauge shutters to receive glass and wire mesh, dovtailed or welded complete all as per Drawing No: TD-607 Sheet 1/2 & 2/2 of CE Lucknow Zone. Size of window will be as per existing opening and complete all as specified and directed.
S&F Steel windows or ventilators, fixed type, with glazing bars complete all as specified and directed.
S&F plain solid, strainght chowkhats & frames of 2nd class HW Hollock wrought, framed rebated on the solid,rounded or chamfered, put together with glue & pinned at joints including preparation of back of chowkat & treated with coal tar complete all as specified and directed.
S & F second class hard wood factory made, 30 mm gauged and skeleton shutter factory made with sash bars divided into squres/rectangle open rebated and prepared to receive gauge etc with top, bottom and lock rail , styles, edges of framing champhered or rounded, fitted with cut a and mitered beads for securing glass, etc size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24(a) and fitted to chowkhats, complete all as specified and directed.
S&F flush shutter 30 mm th solid core construction with block board core & ply wood face panels, commercial type on both side, complete all as specified and directed.
S&F 25 mm thick flush shutter (for cup board) solid core construction with block board case & plywood face panels with commercial face on both sides including lipping on edge complete all as specified and directed.
S & F solid door frame of size 50mmx47mm made out of 5mm thick PVC sheet prelaminated on single side and plain on other side, reinforced with MS square tube including painting of edges to match with prelaminated sheet, fixed in opening as per specification & drawing, complete all as specified and directed.
S & F for factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struk, complete all as specified and directed.
S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire & average width of aperture 1.18mm & fixed with tinned tacks or galvanized wire staples complete all as specified and directed.
M&L for 4mm thick sheet glass ordinary quality and glazing fixed with wooden beads in squares not exc. 0.5 Sqm in each panel complete all as specified and directed.
M&L for 3mm thick figured glass pin head type and glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all as specified and directed.
M&L plain cement concrete type B1 ( 1:2:4) using 20 mm graded stone aggregate as in lintels upto 1.5m clear span, cills,steps; seismic and other similar band, copings, covings bed plates, and like including weathering slightly rounded or chamfered angles, complete all as specified and directed.
S&F mild steel work as in hold fasts and similar articles conforming to Fe-410-0 or Fe-310-0, complete all as specified and directed.
S&F Chimney bars (straight or camber); bearing bars; tongues or water bars for window frames; window guard bars, plain, let in and fixed independently in wooden frames, L or T section supports for shelves etc. and similar articles conforming to Fe-290 Gde E-165, complete all as specified and directed.
M&L for preparation of new steel surface over 10cm width or grith & applying two coats of synthetic enamel paint of 1st quality over a coat of red oxide primer complete all as specified and directed.
M&L for preparation of new wooden surface over 10cm width or grith & applying two coats of synthetic enamel paint of 1st quality over a coat of pink primer complete all as specified and directed.
S & F aluminium anodized barrel tower bolt of extruded section, 150 mm long complete all as specified and directed.
S&F for 100 mm size butt hinges extruded brass with mild steel pin, bright polished type B11 medium weight, cold rolled, complete all as specified and directed.
S & F continuous (Piano) hinges, width of flaps (when open ) 30mm, mild steel bright finish or electro galvanised, ISI Marked, complete all as specified and directed.
S&F aluminium handle 125 mm size,cast type, anodised complete all as specified and directed.
S&F for 250 mm Aluminium alloy anodised,sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.
S&F 150 mm size mild steel Doule action spring hinge, with steel wire spring, stove enamelled black, complete all as specified and directed.
S & F in repair 20 mm dia fancy type drapery curtain rod made of mild steel duly PVC sleeved complete all as specified and directed.
S & F in repair Powder coated brackets for fixing curtain rod of any dia and fixed complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) & removing & rubbish off the premises complete all as specified and directed.
M&L for non skid ceramic tiles of 7-8 mm (square or rectangular) area of each tile exceeding 0.06 sqm but n.exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick cement mortar 1:3, complete all as specified and directed.
M&L for glazed colour joint free ceramic tiles of size 350x250x7mm/ 450x300x7mm thick any tint, on vertical surfaces set and jointed in neat cement slurry and pointed in white / coloured cement to match over and including 10 mm thick cement mortar 1:3 complete all as specified and directed.
Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 20 mm thick screeding in CM 1:6, complete all as specified and directed.
Demolition of concrete (unreinforced)in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified and directed.
M&L for Cement concrete type B0 1:2:4 (Using 12.5mm graded stone aggregates) as in foundations, sub base, levelling course, filling and mass concrete, complete all as specified and directed.
M& L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding edges and polishing over and including 20 mm thick screeding in CM 1:6 complete all as specified and directed.
M& L for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, strips in floor, cooking platforms and like in over and including 20mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of makrana white, complete all as specified and directed.
M & L kota stone slab 20-25mm thick in riser of steps, skirting. Dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10 mm thick cement mortar 1:3 complete all as specified and directed.
Taking down cement plaster on brick wall, racking out joints hacking for key scrubbing down with water complete all as specified and directed.
Demolition of brick work or stone / boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and pre cast concrete articles complete all as specified and directed.
M&L fly ash bricks, old size as per IS 1489 (Part I)-2002 buit in CM 1:6 straight or curved on plan exc. 6 M mean radius complete all as specified and directed.
M&L for rendering 10 mm thick on brick work/ concrete surfaces in cement mortar 1:6 on fair faces finished fair & even, complete all as specified and directed.
M&L for 15 mm thick rendering in CM 1:4 on fair faces of brick work surface finished even and fair without using extra cement, complete all as specified and directed. (Note : Integral WPC shall be measured and paid seprately )
M & L for 5 mm thick rendering on concrete surfaces such as sides of roof beams, soffits of roof slab etc in CM 1:3 , finished fair & smooth w/o using extra cement, complete all as specified and directed.
Supply only integral WPC of approved quality, complete all as specified and directed.
Preparation of newly plastered surfaces and applying two coat of oil bound disemper over one coat of oil base primer all as specified on walls surface.Incl a coat of 2mm wall care putty, complete all as specified and directed. Note :- Work to be carried out through roller/air less spray machine (mechanical means)
M&L applying two coats of Apex ( Asian Paint) / Weather coat (Berger) over newly plastered surface including preparation of wall surface over and including 2mm thick wall care putty complete all as specified and directed. Note :- Work to be carried out through roller/air less spray machine (mechanical means)
M & L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
M & L for complete removal existing treatment and applying non metalic plastic emulsion paint with designer roller over a base coat of plastic paint over a coat of 2mm wall care putty complete all as specified and directed. (Note :- Shade & Design as directed by Engineer in charge).
M&L for 100 mm thick PCC 1:4:8 type D2 (using 40 mm graded stone agrregate) as in sub base floor etc complete all as specified and directed.
M&L 75 mm thick cement concrete 1:3:6 type C2 (using 40 mm graded stone aggregate) as plinth protection/path and the like complete all as specified and directed.
M&L for exterior grade outdoor coloured floor tiles (heavy duty) of tactileseries of size 300x300x10mm of Make Johnson endura or equivalent make bedded over and including 20mm thick screed bed in CM 1:6 and jointed in cement mortar to match the colour of floor complete all as specified and directed.
S & F for virteous china wash down water closet pan (pedesatal patter) white (excluding fixing bolts, flushing cistern and flush pipe, complete all as specified and directed.
Excavating in trenches in soft/loose soil n exc 1.5 m wide and n exc 1.5 m depth and getting out for foundation, complete all as specified and directed.
M&L 150 mm bore Salt - glazed stone ware drain pipes, ('A' grade) laid in trenches and jointed complete all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for all forming branch channel (1/2) round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching, 150mm dia pipe, complete all as specified and directed.
M&L Plain cement Concrete ( 1:4:8) type D2 bed to 150 mm bore drain pipes including packing under , and haunching against the sides of pipes after they are laid and tested in complete all as specified and directed.
Returning filling in including spreading levelling, watering and well ramming in layers n exc 25 cm in soft/loose soil, complete all as specified and directed.
Removing excavated materials n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified and directed.
Taking down existing PVC water tank capacity exc 250 & n.exc 500 ltr and S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt I. capacity of tank 500 litres complete all as specified and directed.
S&F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 20 mm bore pipe, screwed for iron pipe and fixed. .(Minimum weight 20mm-210gms) complete all as specified and directed.
S & F 20mm dia gun metal or gate valve with ironwheel head screwed both for iron pipe and fixed, complete all as specified and directed.
Cutting Chases, pining in, making good to facing where where required and pointing in cement martor 1:3 to ends or edges of landing , steps cills, sunshades, sheleves, lentels etc cutting chases for concealed water tubing or concealed wiring etc making good, cutting exceeding 10 cm but nexc 20 cm girth in brick walls, complete all as specified and directed.
Taking up or down steel tubing and connections 15 mm bore, complete all as specified and directed.
Taking up or down steel tubing and connections 20 mm bore, complete all as specified and directed.
Taking up or down steel tubing and connections 25 mm bore, complete all as specified and directed.
S&F tubes 15 mm bore "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor complete all as specified and directed.
S&F tubes 20 mm bore "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor complete all as specified and directed.
S&F tubes 25 mm bore "medium grade" with all fittings & fixed complete to wall and ceilings or laid in floor complete all as specified and directed.
S & F in repair stop valve chromium plated fancy type with long shank and cup (concealed type) 15mm dia cast copper alloy screw down pipe pressure with crutch or butterfly handle scrwed both ends for iron pipe or union, complete all as specified and directed.
S&F in repair for bib taps for 15 mm bore pipe cast copper alloy chromium plate with crutch or butterfly handle,screwed down, screwed for iron pipe and fixed, complete all as specified and directed.
S & F in repair 15mm dia pillar taps cast copper alloy chromium plated ,screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts screwed for iron pipe (bore of pipe 15mm), complete all as specified and directed.
S&F in repair CP Angle stop cock ( one way) long thread with wall flange , fancy type screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified and directed.
S&F in repairs Brass chromium plated shower rose without swivel joints , any size, including fixing to steel pipe or union complete all as specified and directed.
S & F in repair PVC valveless, syphonic action type 10 ltrs flushing cistern low level white with inlet, ball valve float and handle incl brackets complete all as specified and directed.
S&F PVC connection for 15 mm bore pipe (Length 450 mm approx), complete all as specified and directed.
S & F for corner sheet glass shelf of 4.8mm thick fixed with Stainless steel clamps and other necessary fittings suitable for holding in wall corner with minimum 200 mm length in front circular shape, complete all as specified and directed.
S & F for sheet glass shelf of 4.8mm thick fixed with Stainless steel clamps and other necessary fittings suitable for holding in wall of minimum size 300x150mm, complete all as specified and directed.
S&F CP brass tubular towel rail 20 mm dia and 600 mm long including brackets complete all as specified and directed.
S&F in repair angle valve two way cast copper alloy, fancy type, chromium plated with cup (concealed type) (bore of pipe 15 mm) complete all as specified and directed.
S&F in repair for Vitreous Cliina wash basin, wliile, flat back, size 580x450irun excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.
Supply and fix for 32mm Waste coupling of PTMT (half or full threaded), (Minimum weight 32mm-45gms/40mm-60 gms), complete all as specified and directed.
M&L for complete removal existing treatment and distempering walls with two coats of distemper oil emulsion white or tinted over a coat primer on wall sufaces over and including 2mm thick wall care putty complete all as specified and directed. Note :- Work to be carried out through roller/air less spray machine (mechanical means)
M&L for two coat of exterior emulsion paint over putty of avg thk 2mm on old decorated surfaces of any decription over 10 cm width or girth complete all as specified and directed. Note :- Work to be carried out through roller/air less spray machine (mechanical means)
Taking down pipes (any size) incl all fittings, complete all as specified and directed.
S &F 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints,fixed to walls, complete all as specified and directed.
All as per item No 86 above but dia of 75mm
S & F 110mm bore PVC(SWR) junction single (single Tee) equal or unequal with access door, complete all as specified and directed.
All as per item No 88 above but dia of 75mm
S&F 110mm bore PVC (SWR) vent cowl, complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend of any radius, complete all as specified and directed.
All as per item No 91 above but dia of 75mm
S & F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of dia of 110mm, complete all as specified and directed. (Note: Earth work measured and paid seperately)
All as per item No 93 above but dia of 75mm
All as per item No 93 above but dia of 50mm
M & L in repair for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.
M & L in repair for 75mm PVC (SWR) multi floor trap with grating including jointing with solvent cement, complete all as specified and directed.
Demolition of existing roof treatment of any type, complete all as specified and directed.
Demolition of cement concrete of any description and in any position including removal of WC/bath & sanitary fittings etc in sunken portion area, removing demolished material completely and old waste pipt from sunken portion and cleaning the side/bottom surface of sunken floor with wire brush, complete all as specified and directed.
M & L for moistering the prepared surface for proper dispersion and penetration and applying two component cementitious elastomeric water proofing coating damp block 2K manufactured by M/S Asian paints Ltd to form wterproffing membrane in two coats @ 1.4Kg/sqm to built 1mm thickness as per manufacture specifications of i.e first coat 0.7 Kg/sqm and while 1st coat is still green, second coat shall be applied with a suitable and stiff brush 0.7 kg/sqm. Treatment shall be carried out to entire horizontal surface and upto the heitht of tile level on vertical walls. Subsequently curing to be done on the vertical and ponding for 48 hours on the horizontal surface according to the good procticce and as per ddirection given by EIC for checking for leakage proffing, and filling of sunken floor with PCC 1:5:10 complete all as specified and directed. Note:- Treatment shall be done through authorised representative of manufacturere and atleast 3 years sunken water proofing warrantly by manufactures.
M & L 15mm thick screed plaster on RCC slab CM 1:4 with using water proofing compound @ 3% by weight of cement, complete all as specified and directed. (Note :- WPC to be measured and paid separately)
M & L for water proofing treatment on roof surfaces in the following manner:- (a) The surfaces shall be painted with hot bitumen grade 30/40 confirming to IS-73 @ 1.20 kg/sqm over a coat of bituminous primer conforming to IS-3384 @ 0.30 ltr/sqm. (b) supply & lay 3 mm thick APP water proofing membrane reinforced with non woven polyster matt laid using butane torch by torch on application with a side lap of 10 cm & 15 cm end lap weinghing not less than 3.5 kg/sqm. (c) Applying two coats of aluminium painting over APP membrane.
Taking down carefully aluminium/Copper conductor point wiring (light, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately)and making good disturbed surfaces of walls, floors, etc. to match with the existing good disturbed surfaces of walls, floors etc. match with the existing complete all as specified and directed.
M&L point wiring for one light/fan point controlled by one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC concealed conduits and conduit accessories/fittings, pressed steel terminal switch boxes, 3 mm thick Bakelite sheet top cover (ISI Marked) fitted with Chromium plate brass screws washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly and make wall surfce as existing same colour complete all as specified and directed.
M&L point wiring for one socket outlet point 5 amps on independent board controlled by one, one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC concealed conduits and conduit accessories/fittings, pressed steel terminal switch boxes, 3 mm thick Bakelite sheet top cover (ISI Marked) fitted with Chromium plate brass screws washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dolly complete all as specified and directed.
All as per item No 105 above but one socket outlet point on same baord with other switches with 1.5 sq mm single core multistranded PVC insulated FRLS cable including 1.5 sq mm single core multi stranded copper cable used as continuous earth wire.
M&L point wiring for 15 amps socket point controlled by one, one way switch using 2.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated FRLS unsheathed cables in and including PVC concealed conduit and conduit fittings including pressed steel terminal switch boxes and 3 mm thick plate for fixing of switches/sockets and fitted with Chromium plated brass screws & washers and1.5 Sq mm nominal cross sectional area multi stranded copper conductor, PVC insulated unsheathed earth wire and connected to earth dolly complete all as specified and directed.
S&F Polycarbonate switch piano flush type, SP,5/6 Amps, one way complete all as specified and directed.
S&F Polycarbonate switch piano flush type, SP, 16/20 Amps, one way complete all as specified and directed.
S&F Polycarbonate socket out let 2 in 1 socket 5 pin, (6 Amps) flush type controlled by one switch, complete all as specified and directed.
S&F Polycarbonate socket out let 6 pin, 20 Amps complete all as specified and directed.
M&L ceiling rose, Pilot 3 Plate ceiling rose 6A, complete all as specified and directed.
S&F Ceiling fan regulator electronic type deluxe 240 , 5 step , Volts ISI Marked specified make complete all as specified and directed.
S&F epoxy powder coated distribution box Double door type SPN 8 way,with 200 amps rated bus bar, 240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal double door complete all as specified and directed.
S&F epoxy powder coated distribution box Double door type SPN 12 way, with 200 amps rated bus bar,240 Volts for MCBs, grouted flush to walls complete with IP 43 and metal door complete all as specified and directed.
S&F MCBs MCB SP, 6 to 32 Amps B /C seires , 240 Volts to be housed in DBs Proper and suitable size cable lugs to be fixed with MCBs are including in unit rate of each complete all as specified and directed.
S&F MCBs MCB SPN/Isolator single pole and neutral link, 40 Amps , 240 Volts to be housed in DBs Proper and suitable size cable lugs to be fixed with MCBs are including in unit rate of each complete all as specified and directed.
S & F Single pole enclosure box suitable for MCB SP of capicity 6 to 32 Amps B/C type complete all as specified and directed.
M&L for concealed sub main wiring comprising two single core, 4 Sq mm nominal cross sectional area multi on same copper conductor cable, PVC insulated FRLS Grade unsheathed 1100 Volts grade drawing in and over PVC conduits and conduit fittings complete (concealed type) including S&F 4 Sq mm nominal cross sectional area n green coloure on same copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Cutting chases and making good of disturbed surfaces shall deem to be including in the unit rate quoted by tendered).(Note :- Extra length of cables/wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)
M&L for concealed sub main wiring comprising two single core, 10 Sq mm nominal cross sectional area multi on same copper conductor cable, PVC insulated FRLS grade unsheathed 1100 Volts grade drawing in and over PVC conduits and conduit fittings complete (concealed type) including S&F 10 Sq mm nominal cross sectional area on same copper conductor cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed. (Cutting chases and making good of disturbed surfaces shall deem to be including in the unit rate quoted by tenderer). (Note :- Extra length of cables/wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly)
M&L earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick, buried directly in to ground (earth pit) not less than 2.25 meters deep below GL with top edge of earth plate not less than 1.50 m below ground level, connected to GI lead wire of 4 mm dia. (7.50 m long) by means of nuts, bolts and washers, check nuts of GI and protected by the GI pipe light grade 1.5 mm nominal bore (7.50 m Long) for earth plead wire, watering pipe light grade of 20 mm nominal bore, 0.63 mm thick CI funnel, wire mesh etc complete including necessary earth work and excavation in any type of soil, PCC 1:2:4 type B1 earth pit and Precast RCC cover 50 mm thick dully reinforced with 6 mm dia, MS round bars @ 100 mm C/C both ways, earth testing point, making good to floor complete all as specified and directed.
M&L Distribution Board TPN with and including of DPX MCCB 35 KA 160 Amps MCCB FP, as incomer and SP/TPN MCBs as outgoing , 4 way with metal double door as in replacement, complete all as specified and directed. Note :- FP MCCBs 35 KA 160 Amps 1 No and 24 Nos MCB SP 32 Amps 230 Volts and Blanking plate shall be measured and paid under this this item
Supply and fixing in repair flexible copper cable three core 0.75 sqm suitable for connection for electric fititing and fixture complete all as specified and directed.
Supply and fixing in repair flexible copper cable three core 1.5 sqm suitable for connection for electric fititing and fixture complete all as specified and directed.
Supply and fixing of Recess LED llight fittings of size 2X2 24 watt LED made of CRCA powder quoted finish with Fully Covered by PMMA Acrylic Lumio Diffuser, LED Used shall be SMD type and fixture including cutting and making false ceiling of any pattern/mtrl proper fixing of light in falce ceiling , electrical connection up to 15 feet height of various ward and dept complete all as specified and directed.
S & F LED TUBE light fittings with battern of capicity 10 watt (2 feet) complete all as specified and directed.
S & F Lamp holder battern/anguler type , PVC/polycarbonate type with cord grip cap suitable for pendant fittings, complete all as specified and directed.
Taking down old unserviceable FTL T/L rod any watt and Supply and fixing LED tube light 18/20 watt 4 feet retro complete all as specified and directed.
Taking down old unserviceable FTL battern and S& F new barttern fiting sitable for LED tube rod 20 watt pre wired including connection complete all as specified and directed.
M/S Reliance Construction
m/s raghubar dayal
M/s Bipin Construction
M/S SWATI CONSTRUCTION
NEW BHARAT ENGINEERING AND CONSTRUCTION CO
M R CONSTRUCTION
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .