Fabrication and erection of canopies above different structures Silo Plant, Lingaraj OCP like counterweights of different conveyors, cable trenches of SS 1, 2 and 3, stair case near LSP room etc. by supply, fabrication and erection of different iron

Amount

Structural steel work, which includes both fabrication & erection by supply of necessary iron & steel materials, riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position etc. and applying a priming coat of approved steel primer all complete as required as per the direction of EIC.

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be rupplied in single length upto 12 metre or as desired by Engineer- in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required as per the direction of EIC.

Total impact of GST plus Labour Cess [@ 1 % (BOCW Cess to be deducted from the RA bill as per the value of the work progress)] for the purpose of CTC

ADILAKSHMI ENGINEERING