REPAIR TO ROADS UNDER AGE B/R-I OF GE (WEST) MATHURA

Amount

M & L Preparing existing black top surface by brushing with wire brushers for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. complete all as specified and directed.

M&L for applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 grade @ 05 kg per 10 Sqm complete all as specified and directed.

M&L for bituminous semi dense asphaltic concrete 30 mm consolidate thickness with 5.5.% binder content paving bitumen VG-30 by weight of total mix and OPC-43 grade using as filter material laid with mechanical paver rolled and compacted with 8 to 12 tonne power roller to required camber and gradient complete all as specified and directed. Note:- (i) Bituminous concrete shall be mixed in hot mix plant, transported from plant to work site and laid/spread by means of mechanical paver finisher . (ii) Filler for bituminous concrete shall be OPC-43 grade @2% of total mix. (iii) Contractor shall quote his rate on the basis of binder as mentioned in this item. If there is any negative variation in the actual binder content used as per design mix approved by GE, the rate shall be adjusted @ Rs.53.00 per Kg of binder used. However no price adjustment shall be made if the binder content works out to more than as specified in said item. (iv) Work shall be executed as per design mix approved by GE.

Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed.

M&L for Premix bituminous, macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) with 4% binder content using paving bitumen VG-30 by weight of total mix, laid & rolled and compacted to required gradient and camber with 8 to 10 tonne power roller complete all as specified and directed.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. completea all as specified and directed.

S&F in repair solar delineator with height of 1000 mm and 48 x 100 mm diameter made from polycarbonate Top & Aluminium casting, solar powered by nanocrystal solar panel, type of battery 3 x 1.2 Volt high capacity Nimh, 2400 AH rechargable battery, view distance upto 1000mtr, LEds-10mm, 3 pieces each side and total six piece are used for high brightness of different colours back up 12 hours of continous lighting at night, colour as required Red/Amber/Green complete all as specified and directed.

M & L for preparing bituminous surfaces of road and marking 2.0mm thick centre lines, stop lines, dashes, arrows etc. and the like exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed.

M/s Singh Engineering Corporation (BID ID -3271872)

shyam construction (BID ID -3274340)

RANA CONSTRUCTION (BID ID -3274154)

Matrubhoomi Construction (BID ID -3271731)

R N AGRAWAL (BID ID -3277398)

M/s M S Sharma and Co. (BID ID -3273970)

Tarun Builders (BID ID -3273616)