REPARIS AND POLISHING OF CERTAIN WOODEN FURNITURE AND SOFA SETS INCLUDING TRADE PATTERN FURNITURE AT OFFRs MD ACCN UNIT LINES AND STORE YARD OF BSO (SOUTH) UNDER GE (SOUTH) BANGALORE

Amount

BED PLYWOOD TOP WITH MNF SET (Applicable to item No 01 to 05): (Drg No. FD- 246) Removing the existing unserviceable broken wooden long rail and supply of first class hard wood (Teak wood) new long rail of size 35mmx90mmx1980 mm including 35 mm x 5mm flat iron of mild steel bent to right angles as shown on drg and all as specified and directed.

Removing the existing unserviceable broken wooden head board including legs and supply and fix 900x400mm new head board including teak wood legs of size 60mmx60mmx400mm as shown on drg and all as specified and directed.

Removing the existing unserviceable /broken foot board including legs and supply and fix 900x300mm new foot board including teak wood legs of size 60mmx60mmx30mm as shown on drg and all as specified and directed.

Removing the existing unserviceable /broken wooden stiffeners (supporting pieces) and supply and fix first class hard wooden stiffeners of size 40cmx60cm as shown on drg and all as specified and directed.

Removing the existing unserviceable plywood and supply and fix 900mmx1800mm x 12mm thick plywood commercial BWR grade bearing ISI marked as shown on drg and all as specified and directed.

SIDE BOARD (Applicable to item Nos 06 to 14): (Drg No. FD- 241) Removing the existing unserviceable top and supply and fix new top made out of 18mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination not less than 1.5mm thick of sizes 1220mmx455mm etc as shown on drg and all as specified and directed.

Removing the existing unserviceable side and supply and fix new side made out of 18mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination not less than 1.5mm thick of sizes 760mmx455mm etc as shown on drg and all as specified and directed. Note:- Each side shall be measured as single units.

Removing the existing unserviceable back of side board and supply and fix new back with 6mm thick plywood, grade BWR, type BB with no. of ply 5, ISI marked of sizes 1220mmx700mm as shown on drg and all as specified and directed.

Removing the existing unserviceable bottom of drawer and supply and fix new 12mm thick plywood, grade BWR, type BB with no. of ply 7 of size 380mmx450mm as shown on drg and all as specified and directed.

Removing the existing unserviceable drawer and supply and fix new drawer of size 380mmx450mmx155mm, made out of teak wood plank 12 mm thick for sides and back and 18mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for front and 6mm thick plywood for bottom of drawer, including fittings such as knobs etc as shown on drg and all as specified and directed. Note:- Each drawer will be measured as single unit.

Removing the existing unserviceable shutter and supply and fix new shutter of size 600mmx390mm made out of 18mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, including hinges, knobs and lock as shown on drg and all as specified and directed. Note:- Each shutter will be measured as single unit.

Removing the existing unserviceable bottom of side board and supply and fix new bottom of sizes 455mmx1228mm, made out of 18mm thick plywood, grade BWR, type BB as shown on drg and all as specified and directed.

Removing the existing unserviceable leg frame and supply and fix new teak wood leg frame with legs, sizes 1140mmx 380mm etc as shown on drg and all as specified and directed.

Removing the existing unserviceable broken wooden legs and supply and fix new teak wood leg, size 45mmx45mmx125mm etc as shown on drg and all as specified and directed. Note:- Each leg will be measured as single unit.

TABLE WRITING (Applicable to item Nos 15 to 20): (Drg No. FD- 249, FD-33 & FD-275) Removing the existing unserviceable broken top and supply and fix new top made out of 18mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick teak wood edging, size 1145mmx600mm as shown on drg and all as specified and directed.

Removing the existing unserviceable/ damaged cupboard shutter and supply and fix new shutter made out of 18 mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, size 400mmx700mm, including piano hinges and brass lock as shown on drg and all as specified and directed.

Removing the existing unserviceable drawer and supply and fix new drawer size 300mmx600mmx75mm, made out of teak wood plank 12 mm thick for sides and back and 18mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for front and 6mm thick plywood for bottom of drawer (Plywood, grade BWR, type BB with no. of ply 5) including fittings such as knobs etc as shown on drg and all as specified and directed. Note:- Each drawer will be measured as single unit.

Removing the existing unserviceable back and supply and fix new back size 1145mmx700mm, made out of 6mm thick Plywood grade BWR, type BB, no. of ply 5, with two coats of synthetic enamel paint over a coat of primer as shown on drg and all as specified and directed.

Removing the existing unserviceable side and supply and fix new side size 600mmx700mm, made out of prelaminated particle board, 18mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination as shown on drg and all as specified and directed. Note:- Each side will be measured as single unit.

Removing the existing unserviceable leg and supply and fix new teak wood leg size 35mmx55mmx717mm etc as shown on drg and all as specified and directed.

TABLE DINING 6 PERSONS 1500mm x 900mm (Applicable to item Nos 21 to 24): (Drg No. FD- 273 & FD-239) Removing the existing unserviceable damaged top and supply and fix with a new prelaminated particle board 18mm with 6 mm thick teak wood edging all round of size 1500mmx900mm as shown on drg and all as specified and directed.

Removing the existing unserviceable damaged front and back rails & supply and fix new teak wood front and back rails of size 25mmx100mmx1500mm as shown on drg and all as specified and directed.

Removing the existing unserviceable damaged leg and supply and fix new teak wood leg of size 75mmx40mmx760mm as shown on drg and all as specified and directed.

Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 25mmx100mmx900mm as shown on drg and all as specified and directed.

TABLE DINING 8 PERSONS 1800mm x 900mm (Applicable to item Nos 25 to 28): (Drg No. FD- 273 & FD-239) Removing the existing unserviceable damaged top and supply and fix new top with a new prelaminated particle board 18mm with 6 mm thick teak wood edging all round of size 1800mmx900mm as shown on drg and all as specified and directed.

Removing the existing unserviceable damaged front and back rails & supply and fix new teak wood front of size 15mmx100mmx1800mm and back rails as shown on drg and all as specified and directed.

Removing the existing unserviceable damaged leg and supply and fix new teak wood leg of size 75mmx40mmx700mm as shown on drg and all as specified and directed.

Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 25mmx100mmx900mm as shown on drg and all as specified and directed.

TABLE PEG (Applicable to item Nos 29 to 32): (Drg No. FD- 384, FD-25 & FD-236) Removing the existing unserviceable top and supply and fix new top of size 450x300 mm made out of 18mm thick pre-laminated particle board and 4mm thick teak wood edging round the top of table as shown on drg and all as specified and directed.

Removing the existing unserviceable bottom rail and supply and fix new teak wood bottom rail of size 20x 40x300mm as shown on drg and all as specified and directed.

Removing the existing unserviceable front/back rail and supply and fix new teak wood front/back rail of size 20x 40x450mm as shown on drg and all as specified and directed.

Removing the existing unserviceable leg and supply and fix new teak wood leg of size 30x50x380 mm as shown on drg and all as specified and directed.

TABLE CENTRE (Applicable to item Nos 33 to 36): (Drg No. FD- 274, FD-29 & FD-235) Removing the existing unserviceable top and supply and fix new top of size 900mm x 450mm made out of 18mm thick pre laminated particle board and provided 4mm thick teak wood beading alround of table top as shown on drg and all as specified and directed.

Removing the existing unserviceable leg and supply and fix new teak wood leg of size 30mmx60mmx400mm as shown on drg and all as specified and directed.

Removing the existing unserviceable long rail and supply and fix new teak wood long rail of size 30mmx60mmx900mm as shown on drg and all as specified and directed.

Removing the existing unserviceable short rail and supply and fix new teak wood short rail of size 30mmx60mmx450mm as shown on drg and all as specified and directed.

TABLE DRESSING WITH MIRROR LADIES (Applicable to item Nos 37 to 44): (Drg No. FD- 32 & FD-251) Removing the existing unserviceable drawers and supply and fix new drawers of size 300mmx380mm & 315mmx115mm made out of teak wood plank 12mm thick for sides/ back and 18 mm thick pre-laminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for front and 6 mm thick plywood, grade BWR, type BB with no. of ply 5 for bottom of drawers, including fittings such as knobs etc Removing the existing unserviceable long rail and supply and fix new teak wood long rail of size 30mmx60mmx900mm as shown on drg and all as specified and directed. Note:- Each drawer shall be measured as single unit.

Removing the existing broken glass shutters and supply and fix new glass shutters of size 300mmx390mm as shown on drg and all as specified and directed. Note:- Each glass shutter will be measured as single unit.

Removing the existing unserviceable aluminium channel and supply and fix new aluminium channel of width 10mm thick suitable for the drawer of size 530mm long as shown on drg and all as specified and directed.

Removing the existing unserviceable plywood portion from back of mirror and supply and fix new back with frame of size 395mmx1230mm made out of 6 mm thick plywood, grade BWR, type BB with no of ply 5 as shown on drg and all as specified and directed.

Removing the existing unserviceable mirror and supply and fix new mirror of size 365mmx1220mm, 5 mm thick as shown on drg and all as specified and directed.

Removing the existing unserviceable 12mm ply wood from back and supply and fix new back of size 395mmx900mm of table dressing ladies made out of 12 mm thick plywood commercial quality as shown on drg and all as specified and directed.

Removing the existing unserviceable frame with legs and supply and fix new teak wood frame with 4 legs of size 235mmx40mmx25mm & 650mmx40mmx25mm as shown on drg and all as specified and directed.

Removing the existing unserviceable leg and supply and fix new leg made out of teak wood of size 155x45x45mm, 4 nos as shown on drg and all as specified and directed. Note:- Each leg shall be measured as single unit.

TABLE DRESSING WITH MIRROR GENTS (Applicable to item Nos 45 to 49): (Drg No. FD- 31 & FD-230) Removing the existing unserviceable top of table dressing Gents and supply and fix new top of size 900mmx300mm made out of 18 mm thick pre laminated particle board as shown on drg and all as specified and directed.

Removing the existing unserviceable bottom of table dressing Gents and suplply and fix new bottom of size 900mmx300mm made out of 18 mm thick plywood commercial quality all as shown on drgs.

Removing the existing unserviceable side partition and supply and fix new side partition of size 300mmx135mm made out of 18mm thick pre-laminated particle board as shown on drg and all as specified and directed. Note :- Each side or partition shall be measured as single unit.

Removing the existing unserviceable drawers of size 4x280mmx130mm of table dressing Gents and supply and fix new drawers made out of teak wood plank 12mm thick for sides and back and 18 mm thick pre-laminated particle board for front and 6 mm thick plywood for bottom of drawers with fitting such as knobs etc as shown on drg and all as specified and directed. Note : Each drawer shall be measured as single unit.

Removing the existing unserviceable mirror and supply and fix new mirror of size 390mmx760mm, 5mm thick with back and frame all as specified and as shown on drgs including with teak wood support as shown on drg and all as specified and directed.

TABLE 900X600 WITH DRAWER (Applicable to item Nos 50 to 53): (Drg No. FD- 283, FD-41 & FD-224) Removing the existing unserviceable table top and supply and fix new top of size 900mmx600mm of prelaminated particle board 18mm of size interior grade with 4mm thick teak wood edging all round as shown on drg and all as specified and directed.

Removing the existing unserviceable/damaged front and back rails and supply and fix new teak wood front and back rails of size 25mmx130mmx740mm as shown on drg and all as specified and directed.

Removing the existing unserviceable damaged leg and supply and fix new teak wood leg of size 60mm to 40mm(bottom) with a height of 735mm as shown on drg and all as specified and directed.

Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 25mmx130mmx440mm as shown on drg and all as specified and directed.

TEAPOY (Applicable to item Nos 54 to 57): (Drg No. FD- 278, FD-34, FD-232 & FD-382) Removing the existing unserviceable top and supply and fix new top of size 600mmx450mm made out of 18mm thick pre-laminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with 4mm thick teak wood edging all around the top of teapoy as shown on drg and all as specified and directed.

Removing the existing unserviceable leg and supply and fix new teak wood leg of size 515mmx45mmx45mm as shown on drg and all as specified and directed.

Removing the existing unserviceable front rail and supply and fix new teak wood front rail of size 450mmx50mmx20mm as shown on drg and all as specified and directed.

Removing the existing unserviceable side rail and supply and fix new teak wood side rail of size 390mmx50mmx20mm as shown on drg and all as specified and directed.

TABLE BED SIDE (Applicable to item Nos 58 to 62): (Drg No. FD/E6/MAP/15(R )) Removing the unserviceable top from table bed side and supply and fixing new top made out of 18mm thick prelaminated particle board with edging fixed to frame as shown on drg and all as specified and directed.

Removing the unserviceable side from table bed side and supply and fixing new side made out of 18mm thick prelaminated particle board fixed to frame with suitable size of screws as shown on drg and all as specified and directed.

Removing the unserviceable back ply from table bed side and supply and fixing new back made out of 18mm thick plywood fixed to frame with suitable size of screws as shown on drg and all as specified and directed.

Removing the unserviceable drawers from table bed side and supply and fixing new drawer made out of 18mm thick prelaminated particle board as shown on drg and all as specified and directed.

Removing the unserviceable handle from table bed side and supply and fixing new handle of size 100mm long MS as shown on drg and all as specified and directed.

Book case: (Drg No. FD-237) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/abbrassive cloth throughly smooth and clean off and applying one coat of french polishing to required finish complete all as specified and as directed.

Side Board: (Drg No. FD-241) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table 900x600 with Drawer: (Drg No. FD-41, FD-283 & FD-224) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table bed side: (Drg No. FD-28, FD-276 & FD-243) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table Dressing Gents: (Drg No. FD-31 & FD-230) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table Dressing Ladies: (Drg No. FD-32 & FD-251) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Bed plywood top: (Drg No. FD-246) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Binsoiled linen large: (Drg No. FD-70) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Chair dining: (Drg No. FD-16 & FD-279) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish complete all as specified and as directed.

Chair dining Map : (Drg No. FD/MAP II/04) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish complete all as specified and as directed.

Chair Easy: (Drg No. FD-17 & FD-229) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Chair writing: (Drg No. FD-20 & FD-280) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Hat stand with mirror : (Drg No. FD-233) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Peg table: (Drg No. FD-384, FD-25 & FD-236) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Sofa Set 4 Seater: (Drg No. FD-258) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying ono coat of french polish to required finish complete all as specified and as directed.

Sofa Set 5 Seater: (Drg No. FD-281) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Stool Dressing: (Drg No. FD-27) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table 900x600 W/o Drawer: (Drg No. FD-284 & FD-42) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table Centre: (Drg No. FD-29, FD-274 & FD-235) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table dining 6 persons: (Drg No. FD-273 & FD-239) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table dining 8 persons: (Drg No. FD-273 & FD-239) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Table office officer wooden: (Drg No. DB-4199) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish complete all as specified and as directed.

Table writing: (Drg No. FD-249, FD-33 & FD-275) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

Teapoy: (Drg No. FD-278, FD-34, FD-232 & FD-382) Preparing the wooden surfaces by scraping and filling bore holes with putty and rubbing by sand paper/ abbrasive cloth throughly smooth and clean off and applying one coat of french polish to required finish complete all as specified and as directed.

SOFA SET (Applicable to item Nos 87 to 95): (Drg No. FD-281) Removing the existing unserviceable tapestry cloth, cushion and replacing with new tapestry cloth as per sample with foam cushion of size 560mmx530mm, 40 density, 100mm thick, including inner cloth as shown on drg and all as specified and directed. Note :- Each cushion for seat or back will be measured as single unit.

Removing the existing unserviceable leg from Sofa and supply and fix new teak wood leg of size 35mmx75mmx510mm as shown on drg and all as specified and directed.

Removing the existing unserviceable arm rest from sofa and supply and fix new teak wooden arm rest as shown on drg and all as specified and directed.

Removing the existing unserviceable side rail from sofa and supply and fix new teak wood side rail of size 35mmx100mmx690mm as shown on drg and all as specified and directed.

Removing the existing unserviceable bearer from sofa long pieces and supply and fix new teak wood bearer of size 590mmx50mmx22mm as shown on drg and all as specified and directed.

Removing the existing unserviceable bearer from sofa short pieces and supply and fix new teak wood bearer of size 440mmx50mmx22mm as shown on drg and all as specified and directed.

Removing the existing unserviceable battens from sofa and supply and fix new teak wood battens of size 570mmx50mmx22mm as shown on drg and all as specified and directed.

Removing the existing unserviceable front rail from sofa long pieces and supply and fix new teak wood front rail as shown on drg and all as specified and directed.

Removing the existing unserviceable front rail from sofa short pieces and supply and fix new teak wood front rail of size 22mmx102mmx1740mm as shown on drg and all as specified and directed.

SOFA SET (Applicable to item Nos 96 to 103): (Drg No. FD-258) Removing the existing unserviceable tapestry cloth, cushion and replacing with new tapestry cloth with foam cushion 40 density, 50 mm thick as shown on drg and all as specified and directed. Note:- Each cushion for seat or back will be measured as single unit. Tapestry cloth to be provided as per sample.

Removing unserviceable plywood 12 mm from seat of sofa set and fix new plywood 12 mm ISI marked BWR grade of size 670mm x 690mm for chairs as shown on drg and all as specified and directed.

Removing unserviceable Plywood 12 mm from seat of sofa set and fix new plywood 12 mm ISI marked BWR grade of size 1740mmx 690mm for chairs as shown on drg and all as specified and directed.

Removing the existing unserviceable front leg from Sofa and supply and fix new teak wood leg of size 30mm x 75mm x 510mm as shown on drg and all as specified and directed.

Removing the existing unserviceable back leg from Sofa and supply and fix new teak wood leg of size 30mm x 75mm x 760mm as shown on drg and all as specified and directed.

Removing the existing unserviceable wooden front bearer from Sofa and supply and fix new teak wood front bearer of size 20mm x 50mm x 1740mm as shown on drg and all as specified and directed.

Removing the existing unserviceable side rail from Sofa and supply and fix new teak wood side rail of size 30mm x 102mm x 690mm as shown on drg and all as specified and directed.

Removing the existing unserviceable back support rail from sofa and supply and fix new teak wood back support rail of size 20mm x 102mm x 1740mm as shown on drg and all as specified and directed.

SOFA SET: Removing the existing unserviceable fabric, cushion and replacing with new fabric with foam cushion 40 density, 50 mm thick as shown on drg and all as specified and directed. Note:- Each cushion for seat or back will be measured as single unit. Fabric to be provided as per sample.

PRIYADARSHINI CONSTRUCTIONS

Global Furnisherts

REENA INDUSTRIES