Electrical Works on Ranjeet Singh Flyover and Safdarjung Flyover, Delhi

Name of Work : Electrical Works on Ranjeet Singh Flyover and Safdarjung Flyover, Delhi.

S. No. Description of Items Qty Unit Rate Amount

A Installation of Flag Masts on Ranjeet Singh Flyover

Supply and installation of 9.5 meter tall round conical flag pole in one section, hot dip galvanized

with flag rod, Clamp suitable for fixing 2 number LED light fixture, concealed junction box

complete with 1 number SP 6 ampere MCB, neutral link, 3x 1.5 sq mm copper flexible cable from

junction box to LED fixtures complete. Flag mast structure shall be designed considering wind

velocity as per IS 875.The structural design of flag mast is included in the item.

Supply of foundation bolts with nuts & washer complete for 9.5 mtrs round conical flag pole as

Supply of Indian national flag of size 6 ft X 9 ft made out of silk polyester fabric with reinforced

MR3 super- strong nylon webbing on all 3 sides suitable for mounting flag as per drawing attached 30 each 5,015.00 1,50,450.00

complete as required.

Painting of 9.5 meter tall round conical pole with marine paint including etch primer suitable for

hot dip galvanized surface complete as required.

Erection of the 9.5 meter tall round conical flag pole with the help of suitable capacity hydraulic

crane on fly over with special tools & safety equipments including installation of flag, fiber dome,

supply & erection of anti climbing arrangement for flag pole with MS clamp for flag pole, complete

Construction of suitable foundation with M 25 RCC concrete / construction of suitable

arrangements for mounting of flag pole made of high strength fabricated steel duly hot dipped

galavanised along with suitable fasteners on existing flyover pavement for 9.5 meter conical round

pole complete as required

Construction of suitable foundation with M 25 RCC concrete on existing fly over pavement for 9.5

meter conical round pole complete as required

Supply & installation of 12 W LED flood light on flag pole suitable for input voltage 220-240 with

CCT 3000-4000 K, IP65 protection, die cast aluminum housing

Dismantling of overhead power supply and interpole cables, providing new underground power supply and LILO cable between streetlight poles and allied

works at Ranjit Singh Flyover

Digitally signed by AMIT

SINGH 20:15:50 IST

S. No. Description of Items Qty Unit Rate Amount

Dismantling of existing LT power supply cable form streetlight Feeder Pillar to first poles, existing

MR9 overhead cable between streetlight poles, disconnection of tap-off/LILO connections for 70 job 14,328.74 10,03,011.80

streetlights at each pole, removal of associated installation/fixing accessories, etc.

Supply, laying under the ground/below flyover deck in existing pipe or on existing cable tray,

MR10 Termination, Testing and Commissioning LT, XLPE insulated, Aluminium armoured Power supply

cable of following size, complete in all respects;

4c x 35 sq mm from existing streetlight feeder pillar (installed at the median of flyover) to the first

streetlight pole

b 4c x 25 sq mm as LILO cable between streetlight poles 1000 RM 885.00 8,85,000.00

Provision of suitable arrangement for LILO of power supply cable and connection for individual

internal cable for each streetlight fitting comprising of the following:

1 No. LILO 4 way terminal block, suitable to receive up to hole type cable lugs for aluminium cable

size up 50sqmm.

b 2 nos. 6A DP MCBs mounted on DIN channel for controlling each streetlight individually.

Insulated sheet of suitable size and thickness, mounted inside the opening of pole for mounting the

terminal block and MCBs, as above c/w hardware.

Provision of 3c x 2.5sqmm copper flexible, FRLS, XLPE insulated cable inside the streetlight pole,

MR12 from MCB (mounted inside the pole) to individual streetlight, including termination at both ends, 34 jobs 3,540.00 1,20,360.00

complete in all respect.

Provision of other miscellaneous material/accessories/missing items and associated works, as

MR13 required to complete the work in all respects, as per the prudent engineering practices and to 1 lot 9,44,000.00 9,44,000.00

make the installation fully functional.

MR14 Transportation and handing over of dismantled cable, etc. from site to designated NDMC stores. 1 job 59,000.00 59,000.00

C Under deck dynamic illumination of Ranjeet Singh Flyover

SITC of DMX Controller with minumum 2 Universe Addresses designed for author, configure, and

control intricate LED light shows in multiple zones,Unlimited Scenes , Input Power- 100 to 240 VAC,

Suitable for 50/60 Hz, Cable (2) RJ45 ports , IEC and UL certified soft copy of Catalogues with

Relevant BIS R Number

Digitally signed by AMIT

SINGH 20:15:50 IST

S. No. Description of Items Qty Unit Rate Amount

SITC of LED RGB and Neutral White 1000 - 1200 mm Linear Wall Washer luminaire for Facade

lighting with Extruded Aluminium housing, of Minimum 50 watt , Minimum 1800 Lumens ,

DMX/Ethernet based control.The beam angle of the fitting shall be narrow ( 30- 35 Deg ) . CRI > 80

MR16 for white Light , SDCM < 4 . Luminaire shall be complete with driver and capable of operating at 12 nos 44,250.00 5,31,000.00

line voltage from120 to 277 V AC,. Fixture shall be suitable to operate at ambient temperature

range of-10°Cto+50°C and shall be IP66 . Soft Copy of Catalogues with Relevant BIS R Number

SITC of exterior IP68 LED RGB/RGBW Flexible light strip of 5 mtr standard length with 10-12 Watt

per meter which can be compatible with the DMX / Ethernet controller. System lumens of

minimum 450 lumens/meter and System Lumen Efficacy > 30lm/w .Luminaire light beam spread -

MR17 110° , The Strip should have IP 68 protection and is offered IP rated connector to join the LED Strips 80 nos 29,500.00 23,60,000.00

in continuity. The luminaire must be offered with Aluminum channel for mounting the strip lights.

The product should be complete with all accessories and Driver . Soft Copy of Catalogues with

Relevant BIS R Number

SITC of RDM-6Wall Splitter,should be able to provide 6-output DMX/RDM splitter with DMX/RDM

pass-through supporting bi-directional communications for discovery, addressing and DMX control

of Ethernet/DMX products.This unit takes the incoming DMX/RDM signal and splits the signal into

six separate output channels allowing for expanding the number of devices controlled from 32 to

6x32. The output terminals are electronically isolated from the input & RDM-through port and

share a common ground reference. All six output ports have an independent output driver to boost

the DMX/RDM signal. Surface or DIN-rail mountable,Isolated DMX/RDM Input/Outputs,Automatic

switching between DMX and RDM mode for auto-discovery, Environment-IP20, Interior

applications,Finish/Color-Polycarbonate, Certification: CE Certified.

SITC of RGB and Neutral white LED Round Architectural floodlight luminaire with Die-cast

aluminium, powder-coated finish, High Power LEDs system wattage not exceeding 36 Watt with

minimum system lumens of 1500 lumens with all channel on,CRI >80 for White light.Luminaire

MR19 should be capable of producing dynamic color changing light by DMX/Ethernet based control. 48 nos 45,430.00 21,80,640.00

Luminaire has a choice of architectural floodlighting optics with beam angles of 30-40 deg , SDCM

< 4 for White Light . Operating Temp - 50 Deg C . Operating voltage - 120-277 V AC . IP66,

Mechanical Impact IK08. Soft Copy of Catalogues with BIS R Number

Digitally signed by AMIT

SINGH 20:15:50 IST

S. No. Description of Items Qty Unit Rate Amount

SITC of RGB and Neutral white LED Round Architectural floodlight luminaire with Die-cast

aluminium, powder-coated finish, High Power LEDs system wattage not exceeding 90 Watt with

minimum system lumens of 3600 lumens with all channel on,CRI >80 for White light. Luminaire

MR20 should be capable of producing dynamic color changing light by DMX/Ethernet based control. 48 nos 62,540.00 30,01,920.00

Luminaire has a choice of architectural floodlighting optics with beam angles of 30-40 deg , SDCM

< 4 for White Light . Operating Temp - 50 Deg C . Operating voltage - 120-277 V AC, IP66,

Mechanical Impact IK08. Soft Copy of Catalogues with BIS R Number

SITC of XLPE / PVC insulated PVC sheated Heavy Duty Round/ strip Electrical cables as per detail

MR21 given below for working Voltage 1.1 kV comply with the IS : 7098 part 1 and IS : 1554 Part 1 as - -

a 3 C X 2.5 sq. mm Cu Unarmooured 2000 RM 188.80 3,77,600.00

b Cat 6 data Cable Armoured 1500 RM 147.50 2,21,250.00

MR22 SITC and laying of 25 mm HDPE/UPVC/PVC (as per Site Conditions) pipe for Data cable 1500 RM 171.10 2,56,650.00

SITC of feeder Pillar in powder coated CRCA 14/16 SWG sheet, outdoor type, three phase, 415 V

consisted of suitable rating contactor, 24 hrs time switch, auto/manual selector switch, ON/ OFF

push buttons, indicator lamps, control wiring, for automatic operation & overcurrent, short circuit,

MR23 earth fault protection of street lights, provided iron frame / CC foundation complete having 25 KW 1 nos 2,95,000.00 2,95,000.00

Servo satbilizer having the provision for incoming 250 Amp 4P MCCB and 4 outoings of 100 Amp 4P

MCCB having timer and all necessary preotection like surge protection device.

Installation of Decorative Poles with Heritage Post Tops on carriage way of Safdarjung Flyover

Digitally signed by AMIT

SINGH 20:15:50 IST

S. No. Description of Items Qty Unit Rate Amount

SITC of 4m Ht - Decorative Pole with PU Paint and 6 Watt Dome Shaped LED Direct View Node. The

MR24 Pole should be complete with 2 Nos of Decorative Post Tops in 3000K with IP66 protection. The 30 nos 2,18,300.00 65,49,000.00

Decorative Pole to be installed on the location of the Central Verge Median

E Over deck crash barrier dynamic illumination of Safdarjung Flyover

Supply, Installation, Testing and Commissioning of 1000mm rigid architectural RGBNW LED Linear

light with housing material of Extruded aluminum with die-cast aluminum end caps,

Electrostatically applied polyester powder coating fiish, system wattage not exceeding 36W and

system lumen output of not less than 1100 lumens and SDCM ≤4. Fixture shall be available with

25°X40° (±10%) beam angle. Fixture shall operate in a temperature range of -40°C to 50°C. The

fixture shall be 24V DC with non-intergral driver. Lifetime should be at least 50,000 burning hours

at L70 @ 35deg with total IP66 protection. Fixture shall equipped with mechanical impact of

minimum IK06 and complet with all the accessories and non- integral driver.

SITC of 3rd Party 75mmx75mm box section hand rail with 45 deg cutout to install fixture in the

hand rail (As per approved Design) with epoxy Paint complete with Clamps

MR27 300 Watt Potted Ip67 driver complete with all accessories for the above fittings 90 nos 4,720.00 4,24,800.00

SITC of XLPE / PVC insulated PVC sheated Heavy Duty Round/ strip Electrical cables as per detail

MR21 given below for working Voltage 1.1 kV comply with the IS : 7098 part 1 and IS : 1554 Part 1 as

a 3 C X 2.5 sq. mm Cu Unarmooured 2200 RM 188.80 4,15,360.00

b Cat 6 data Cable Armoured 1599.92 RM 147.50 2,35,988.20

MR22 SITC and laying of 25 mm HDPE/UPVC/PVC (as per Site Conditions) pipe for Data cable 1600 RM 171.10 2,73,760.00

SITC of feeder Pillar in powder coated CRCA 14/16 SWG sheet, outdoor type, three phase, 415 V

consisted of suitable rating contactor, 24 hrs time switch, auto/manual selector switch, ON/ OFF

push buttons, indicator lamps, control wiring, for automatic operation & overcurrent, short circuit,

MR23 earth fault protection of street lights, provided iron frame / CC foundation complete having 25 KW 1 nos 2,95,000.00 2,95,000.00

Servo satbilizer having the provision for incoming 250 Amp 4P MCCB and 4 outoings of 100 Amp 4P

MCCB having timer and all necessary preotection like surge protection device.

Total Amount 4,62,60,325.00

Total Amount 4,62,60,325.00

Digitally signed by AMIT

SINGH 20:15:50 IST