Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹29.3 LAccepted-AOC 114 BARH CHONDI TOWN BARH DISTT PATNA BIHAR PIN 803213 | PATNA | BIHAR | 803213 | L1 | Accepted-AOC Lowest amount quoted | |
| 2 | L2₹36.0 L+₹4.4 L (13.9%)Rejected-Finance 114 BARH CHONDI TOWN BARH DISTT PATNA BIHAR PIN 803213 | PATNA | BIHAR | 803213 | L2 | Rejected-Finance Second lowest amount quoted | |
| 3 | L3₹36.9 L+₹5.3 L (16.9%)Rejected-Finance | L3 | Rejected-Finance Third lowest amount quoted | |
| 4 | L4₹38.3 L+₹6.7 L (21.2%)Rejected-Finance G 124 FLAT NO 4 DILSHAD COLONY DELHI 110095 | SHAHDARA | DELHI | 110095 | L4 | Rejected-Finance Fourth lowest amount quoted | |
| 5 | L5₹39.9 L+₹8.3 L (26.4%)Rejected-Finance PLOT NO RZ B 1 59 KH NO 534 535 BLOCK B 1 NEW ROHANPURA PP NO 1416 NAJAFGARH NEW DELHI 110043 | NEW DELHI | NAJAFGARH | DELHI | 110043 | L5 | Rejected-Finance Fifth lowest amount quoted |
Tender Value
Refer Docs
EMD Value
₹90,000
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Shri Dhiraj Kumar, IDSE, EE
Garrison Engineer (East), Near COD Estate, Ranjhi, Jabalpur (MP)-482011
CERTAIN BR REPAIRS TO MD ACCN OF MANDIR LINE, CHURCH LINE, GURUDWARA LINE AND SERVANT QTRS NEAR OFFRS MESS OF CMM UNDER AGE BR-I OF GE (EAST) JABALPUR
2022_MES_532481_1
8445/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer (East) Jabalpur
D a(i)
9 documents required · 9 mandatory
₹500
Garrison Engineer (East) Jabalpur
₹90,000
Yes
1 Sept 2022
23 Jun 2022
29 Jul 2022
23 Jun 2022
27 Jul 2022
7 Jul 2022
23 Jun 2022 - 30 Jun 2022
60 days
Amount
Taking down cement plaster on brick or stone wall etc. including raking out joint, hacking for key, scrubbing down with water, etc complete all as specified and directed.
M&L 15mm thick rendering on fair faces of brick work or concrete surface in CM 1:4 mixed with WPC as per manufacturer’s instructions, but not less than 3% by weight of cement finished even and fair without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.
Supply only Integral water proofing compound all as specified and directed (ISI Mark).
M&L for rendering 15mm thick in CM (1:6), on fair faces of brick work or concrete surfaces, finished the surfaces even & smooth, without using extra cement complete all as specified and directed.
M&L for rendering 5mm thick in CM (1:3), on fair faces of ceiling surfaces, finished the surfaces even and smooth (without using extra cement), complete all as specified and directed.
M&L for rendering 10mm thick plaster in CM (1:4), on the top of chajjas, concrete surfaces, finished even and smooth (without using extra cement) and mixed with integral WPC as per manufacturer's instructions but not less than 3% by weight of cement complete all as specified and directed. Note : WPC shall be measured & Paid separately.
M&L for preparation of newly plastered surfaces or previously untreated surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed.
M & L preparation of newly plastered surfaces and applying three coats of white wash on walls all as specified and directed.
M&L for preparing newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5.Sqm but not exc 4 Sqm each.
Taking down chowkats or frames with shutters (without taking off shutters from the frames) n exc 1.5.Sqm each.
Taking down shutters of any description but exc 1 Sqm each but not exc 2 Sqm each .
M&L 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints.
M&L 35mm thick 2nd class HW (factory made) Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified.
S&F 2nd class hard wood 35mm thick glazed and skelton shutters (factory made) of open rebated and prepared to recive glass, guaze etc (without sash bar)edges of framing plain chamfered or rouunded fitted with cut and beads for sccuring glass, gauge etc size of shutters as specified in SSR Part-I section & clause 8.24(a) complete all as specified and directed.
S&F solid PVC door frames of size 50mm x 47mm made out of 5mm plain color PVC sheet reinforced with MS square tube complete all as specified & directed.
S&F factory made solid PVC moulded door shutter designer shutter 35 mm thick comprising of 30 mm thick solid particle board core in centre core, with 2, 4 or 6 raised panel design with 2 mm thick moulded prelam PVC sheet on both face all as specified and directed by Engr-in-Charge.
S&F (factory made) steel windows with side hung shutters including projecting type hinges with lugs steel handles and steel peg stays, with glazing bars, devetailed or welded complete all as specified and directed.
S&F (factory made) steel windows with side hung shutters including projection type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified.
S&F (factory made) steel ventilators with top hung shutter including hinges, steel pegstay complete all as specified and directed.
S&F in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples complete as specified and directed.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane complete all as specified.
All as per Srl item No 22 here-in-before but frosted glass on one side.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified.
S&F 100mm long butt hinges, 'medium weight', Mild steel min 3 mm thick complete of design all as directed by Engr-in-Charge.
S&F 75mm long butt hinges, 'medium weight', mild steel min 3 mm thick complete of design all as directed by Engr-in-Charge.
S& F 150 mm long extruded aluminium alloy handles, fabricated type, anodized complete all as specified.
S&F 100mm long aluminium handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge.
S&F 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge.
S&F 100mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge.
S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy all as specified.
S&F 10 mm dia MS window guard bars conforming to Fe-410-0 or Fe-310-0 and fixed independently in steel/wooden frames complete all as specified.
M&L preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.
M&L preparation of new surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide not other wise described over 10 cm width or girth over steel surfaces surfaces complete all as specified.
Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing rubish off the premised out side M.D. land all as specified.
M&L Non Skid ceramic/coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm screed bed in CM (1:6) complete all as specified and directed.
M&L Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm screed bed in CM (1:6) complete all as specified and directed.
M & L Glazed ceramic coloured tiles in vertical surfaces 350x250x7mm/ 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 15 thick rendering in CM (1:4) finished rough to receive tiles etc with shalicrete R/E (STP) water proofing compound as per manufacturer's instructions complete all as specified and directed.
S&F in repairs vitreous china squatting pan (Orissa pattern), size 580x440mm, white, with integral foot rest (excluding flushing and flush pipe) including connection to trap and flush pipe and incl trap set in lime concrete etc including making good to floor complete all as specified and directed by Engr-in-Charge. Make:- Parryware/Hindware.
S&F in repairs 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified. Make: Parryware/Hindware/ Commander
M&L in repairs 75 mm dia of outlet for PVC floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified.
M&L in repairs for PVC (SWR) multi floor trap 75 mm dia of outlet including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified all as specified.
Taking up or down 15mm bore steel tubing and connections including cleaning for refixing complete all as specified and directed.
Taking up or down 20mm bore steel tubing and connections including cleaning for refixing complete all as specified.
S&F tubes "medium grade" galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 15mm bore all as specified.
S&F tubes "medium grade" galvanised with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm bore all as specified.
Refixing old steel tubing 15 mm bore and connections in new or old position (Wall, ceiling, floor etc.)
Refixing old steel tubing 20 mm bore and connections in new or old position (Wall, ceiling, floor etc.)
S&F in repairs 15mm bore bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for bib ferrule complete all as specified and directed.
S&F in repairs 15mm bore stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed complete all as specified and directed.
S&F in repair brass chromium plated shower rose 125mm size with or with out swivel joints any size and including fixing to steel or union all as specified and directed.
S&F in repairs grating doom 100mm dia of PTMT (Minimum weight 25 grams) complete all as specified and directed.
S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified.
S&F in repair vitreous china wash basin, white flat back, size 580 x 450 mm including brackets, pillar tap, cast copper alloy, 15 mm bore capstain heads, chromium plated screwed down high pressure with long screwed shanks and fly nuts 32mm bore, PVC waste pipe, 32 mm bore chromium plated cast copper alloy waste coupling complete all as specified.
S&F in repairs Stainless steel sinks with drainage board made of 1mm thick sheet for kitchen with plugs washers and waste pipe, cast iron cantilever brackets and connecting union to pipe overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm including bedding and cement mortar or fixing cantilever brackets and connecting union to waste pipe upto 0.5 sqm each all as per specified and directed.
S&F in repairs, 25 mm dia Harrison rails stainless steel CP including fixed with brackets, stops, rollers etc complete all as specified and directed.
Demolition of concrete ground floors and pavings nexc. 15cm thickness (below or above ground level) unreinforced and removing of rubbish to a distance nexc 100m at low lying area complete all as specified.
M&L 40mm thick PCC (1:2:4) type B-1 using 20mm graded stone agg as in floors finished surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for Glass dividing strips 3mm thick and 38mm width of strip ,inserted in position conform to design complete all as specified and directed.
M&L for 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in path/plinth protection finished even and fair with out using extra cement incl expansion joint at every 3.0m interval and every corner complete all as specified and directed.
M&L for 100 mm thick PCC1:2:4 type B 2, using 40 mm graded stone aggregate as in hard standing finished even and smooth without using extra cement complete all as specified.
M&L 25 mm thick cement concrete (1:2:4) type B-0 (12.5 mm graded stone aggregate) as in sub base of floors. Finished even and fair without using extra cement complete all as specified.
M & L 100mm thick cement concrete 1:4:8 type D2 using 40 mm grded stone aggrgate as in sub base finished the surface rough to receive floor finishes complete all as specified.
Demolition of brick work built in cement mortar including all quoins, arches etc complete all as specified and directed.
M&L brick work with old size sub class “B” bricks straight or curved on plan exc 6m. mean radius built in CM (1:6) complete all as specified.
All as per Srl item No 66 here-in-before but except bricks.
S&F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified. Make : Kisan/Supreme/Finolex
S&F in repairs 110mm bore PVC (SWR) pipes bends any radious complete all as specified and directed. Make : Kisan/Supreme/Finolex
Dismantling water tanks of capacity exc 250 Ltrs and n.exc 500 Ltrs complete all as specified.
S&F 500 litrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed. Note : Tanks shall be ISI marked and having two layers. Make : Sintex/Polycon/JS Polyplast
Demolition of cement concrete of any description in any position, concrete filling in sunken floor complete all as specified.
M & L PCC 1:5:10 Type E2 with bricks course aggregate as in filling of sunken slab after laying carrying out required tests for CI pipes joints WPT.
Roughening surfaces of old concrete floor by picking, sweepping clean and washing down with water to remove dust etc complete
M&L for 15mm thick rendering to sides and bottom of sunken slab in CM 1:3 with water proofing compound, finishing the surfaces even and smooth without using extra cement. Note :- WPC shall be measured & paid seperately.
M&L 40mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate as in floors finished concrete surface even and fair complete all as specified.
S&F in repairs GI spouts 50mm bore medium grade, projecting at least 10 cm clear of the wall complete all as specified and directed.
M&L for applying two coats of hot industrial bitumen 85/25 grade @ 1.70 Kg/Sqm over vertical surfaces and floor of sunken slab after laying all CI connection branch pieces etc after covering joints with PCC 1:2:4 mixed with WPC complete all as specified.
M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application complete all as specified & applying two coats of aluminium paint on non approachable roofs complete all as specified and directed.
S&F in repairs 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. Make-Prayag/ Marc/Plumber
S&F in repairs 50mm boreHigh density poythelyne (HDPE) pipes of pressure rating 6kgf/ sq/ m in waste pipe for WHB and sinks,complete all as specified and as directed.
S&F in repairs 40mm waste coupling of PTMT (half or full threaded) . (Mini wt 32mm- 45 gms) complete all as specified.
S&F in repairs Towel Ring of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms).
S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long brackets. Make Prayag/Marc/ Parryware
S&F in repairs viterous china wash down water closet pan (pedestal pattern) white (excluding fixing bolts,flushing cistern and flush pipe) including connection to drain and to flushing pipe syphonage pipe etc. incl plastic water closet seat black, closed pattern with flat bottom & cover and mild steel chromium plated or aluminised hinges device complete all as specified. Make: Parryware/Hindware
S&F in repairs tubular towel rail, 20mm dia, D type, 60cm long brass CP complete all as specified. Make Prayag/Marc/Plumber
S&F in repairs kitchen stainless steel plate rack (min 1mm thick) (36" x30" x10") all as directed and approved complete all as specified. Make : Nirali/Prayag/Blue Star
M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth in brick walls.
M&L machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid over and including 20 mm thick screed bed in CM (1:6) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified.
All as per Srl item No 90 here-in-beforebut as in skirting/dado but over and including 10 mm thick rendering in CM (1:4).
S&F in repairs 300 mm long brass ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed.
S&Fin repairs Hasp and staple, safety type, auminium anodised with mild steel hinge pin including bolt to hinge plate of 100mm size and fixed with screws complete all as specified and directed.
Dismantling plain or corrugated steel sheeting, any gauge, thickness, incl nanital or similar pattern roof covering.
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.5mm thick of any colour (mangalore pattern and joints/lapping filled with silicon compound) any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including necessary cutting groves chasing to wall and making good with PCC 1:2:4 (20mm graded stone aggregate) & plaster in CM (1:3) complete all as directed.
S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.60mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, in ridges, hips, valley gutters, drip and straight flashings etc.fixed with self tapping screws as specified.
Dismantling wrought iron or mild steel work of any description complete all as specified.
S&F for mild steel rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality- A including necessary welding complete all as specified.
S&F mild steel flat iron as in wind tie for roof including cutting & making holes for securing bolts, confirming to Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.
Fixing only wind ties of flat iron for roof including bitumen washers and all necessary drilling, bolting or riveting, etc complete all as specified and directed.
Dismantling timber scantling 40 Sqcm and over in section in any position unframed work.
Dismantling timber scantling under 40 Sqcm in section in any position unframed work.
M&L 2nd class hardwood clean sawn timber framed and fixed as in scantlings all as specified and directed.
All as per Srl item No 103 here-in-before but fixing only.
Dismantling of wall and ceiling boards( fibre pulp insulation etc) any thickness including cover fillets all as specified and directed.
M&L suspended false ceiling system using Chicago metallic (E-grid) exposed suspended system, grid size 600 x 600mm compressing of GI powder coated main runner of dimension 39mm x 24mm x 0.8mm thick (Thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of runner 1.35 Kg for 3600mm length), cross Tee of dimension 29mm x 24mm x 0.7mm thick (Thickness comprising of GI/0.5mm+PPPCGS/0.3mm & weight of Tee 0.195Kg for 600mm length) and wall angle of dimension 22.2mm x 22.2mm x 0.65mm thick (Thickness comprising of GI/0.35mm + PPPCGS/0.30mm & weight of angle 0.700 Kg for 3050mm length) with and including 6mm thick HSPC (High Pressure Steam Cured) pre-primed, self embossed, textured designer board, water, termite & fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins with clips (wt 0.007 Kg/clip), hold down clips (wt - 0.0035 Kg/clip), with provn of light fixture complete all as per manufacturer instructions and as directed. (Make : Armstrong/Ramco).
M&L machine pressed coloured glossy finished precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade using coloured pigment laid on and including sand cushioning of 50mm thick complete all as specified.
S&F factory made solid panel Prelam PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both face prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing. Make : Rajshri/Sintex.
S&F in repairs solid PVC Wall Lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on inside walls of cupbords etc as per specifications and drawing.
S&F in repairs 18mm thick Solid PVC Sandwich Panel with lmm plain colour PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing. Note : MS work shall be measured and paid separately.
S&F in repairs 12mm thick Solid PVC Sandwich Panel with lmm plain colour PVC Sheet on both sides suitably fixed in M.S. angle frame work as per specification & drawing. Note : MS work shall be measured and paid separately.
Dismentling of Asbestos cement (corrugated or semi corrugated, etc.) sheets in roof coverings complete all as specified.
M&L 6mm thick asbestos cement, corrugated or semi-corrugated sheets in roofs, walls fixed with 'L' type or 'J' type or crank hook bolts complete all as specified.
All as per Srl item No 113 here-in-beforebut except sheet.
S&F MS TMT bar 10 mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including M.S wire (annealed) not less than 0.9 mm dia Grade Fe 500/550 complete all as specified and directed.
M&L Precast RCC 1 : 2 : 4 Type B1 ( 20 MM graded stone aggregate) as in cover slab (for manholes etc), chajjas, mangers, shelves etc. set in CM 1 : 6 complete with joints to match complete all as specified.
M&L 20 mm thick Granite (of any type) work (table rubbed and polished) in partition, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) and removing rubbish to a distance nexc 100mtr at low laying area complete all as specified.
Schedule of credit amount of Rs. 2,35,120.00 to be deducted during AOC
a k builders
M/s Ram Associates
sunil traders
M/S CHANDER MUNI
RASTOGI BUILDERS
M/S BHARTI ENTERPRISES
M/S RAJ BUILDERS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .