REPAIRS TO WOODEN / STEEL / PVC, ALUMINIUM JOINARY, FALSE CEILING AND WALL PANELLING IN OTM AND MD ACCN AT ORC, BOLTAN ROAD AND CAW UNDER GE (AF) HAKIMPET

Amount

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

All as per Item No.1 above but exceeding 1.5 Sqm and not exceeding 4 Sqm each, complete all as specified and directed.

Taking down shutters of any description not exceeding 1 Sqm each complete all as specified and directed .

All as per Item No. 3 above but exceeding 1.0 Sqm and not exceeding 2 Sqm each complete all as specified and directed.

M&L for Cutting holes in to brick walls built in cement mortar and making good dismantlled portion in cement concrete 1:2:4, type B1, superficial area exceeding 150 Sqcm but not exceeding 400 Sqcm, complete all as specified and directed.

S&F 2nd class hard wood plain, solid straight chowkats and frame, wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete including treating the back of chowkaths with coal tar black paint, complete all as specified and directed.

S&F Pressed steel frames of size 105X60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L for PCC 1:2:4, type B0 (using 12.50mm graded crushed granite stone aggregate) as in filling in pressed steel door frames, complete all as specified and directed.

M&L for PCC 1:2:4, type B1 (using 20mm graded crushed granite stone aggregate) as in bed blocks of hold fasts, complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube,supplying and fixing in opening as per manufacturers instructions, complete all as specified and directed.

S&F 30mm thick Factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top & bottom rails .M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions, complete all as specified and directed.

S&F 35mm thick, 2nd class hardwood glazed & skelton shutters, open rebated & prepared to receive glass, gauge, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a), complete all as specified and directed.

All as per Item No. 12 above but 30mm thick as in window, ventilator shutters.

S&F 40mm thick flush shutter solid core construction with black board core and ply wood face panels commercial type on both sides, complete all as specified and directed.

S&F 2nd class hard wood in fillets,square, rectangular in section wrought, secured with nails sectional area not exceeding 3 Sqcm fixed in repairs, complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

S&F in repairs, Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed.

M&L for Preparatioin of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat pink primer, complete all as specified and directed.

M&L for Preparatioin of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

S&F 250mm long Aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F 150mm long aluminium anodised barrel tower bolt of extruded section, complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles fabricated type anodised, complete all as specified and directed.

S&F Stainless steel butt hinges 100mm long with stainless steel hinge pin, complete all as specified and directed.

S&F 75mm long MS butt hinges, medium weight cold rolled, complete all as specified and directed.

S&F 300mm long MS ordinary rat tail rod pattern springs including roller & roller plate complete.as in repairs, complete all as specified and directed.

S&F Floor door stopper of aluminum alloy body and tongue, anodised with hard drawn steel spring of 150mm long, complete all as specified and directed.

S&F mild steel flat iron hold fast of any size and similar articles confirming Fe 290 Grade E-165, complete all as specified and directed.

S&F steel windows with side hung shutters including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window, complete all as specified and directed.

S&F steel ventilators with top hung shutter including projecting type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded including taking down the old window, complete all as specified and directed.

M&L for Preparing new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer, complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames or stone, concrete or bricks surrounds, glazed with putty or fixed with beads, complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality fixing with putty/beading in square not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

All as per item No. 32 above but figured glass, pin head type, complete all as specified and directed.

S&F Anodiesed aluminium frame for doors, windows ventilators with one or more rebets including jointing cleats for fixing etc, complete all as specified and directed.

S&F Anodised aluminium door shutter, aluminium section weighing 0.55 Kg per M including necessary jointing cleats, glazing clips rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc, complete all as specified and directed.

S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars aluminium sections weighing 0.55Kg per M including necessary jointing cleats, glazing chips, rubber packing, anodised aluminium snap beading, screws anodised aluminium fittings such a peg stays 150mm long (1No) hinges type D-21 100mm long (2 Nos) suitable handle (1No), complete all as specified and directed.

S&F Brass Mortice lock 4 leavers vertical type size 100mm, complete all as specified and directed.

All as per item No. 37 above but fixed in repairs.

S&F Aluminium (Die cast ) body door closer hydrolically regulated designation No.3 universal type suitable for door shutters of 851 to 1000mm in width and wt between 61 to 80 kgs, complete all as specified and directed.

All as per item No. 39 above but but fixed in repairs.

S&F in repair, Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed, complete all as specified and directed.

S&F Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples, complete all as specified and directed.

S&F 12mm thick prelaminated particle board interrior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with glazing clips, complete all as specified and directed.

S&F Sheet glass ordinary quality 5.5mm thick and glazing with oil putty/glazing clips of any description, complete all as specified and directed.

Taking out the rolling shutters of any size and type, including top cover guide channel, etc carrying out repairs and replacement of spares such as bearing and spring etc. required for smooth functioning as directed by Engineer-in-Charge and re-fixing the same with applying grease/ oil etc including applying one coat of synthetic enamel paint, complete all as specified and directed.

Taking down the gate of any size and type, including removing rollers from gate, greasing, overhauling, change of bearing / bushes, repair and replacement of spares etc reauied smooth function and refixed, complete all as specified and directed.

M&L for running welding in repairs thickness of metal to be welded not exceeding 6mm, complete all as specified and directed.

Demolition wall and ceiling boards ( fiber pulp insullation etc ) or insullation boards / slabs, blankets any thickness including cover fillets, complete all as specified and directed.

S&F Anodised aluminium snap grid frame work for false ceiling all as specified of grid size 605mm X 605mm, complete all as specified and directed.

S&F Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed.

S&F Hangers 6mm dia GI (Upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40X3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.

S&F 12mm thick Seamless calcium silicate ceiling made out of 1800x1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to ceiling section with 25 mm long self drilling and tapping screws to GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two equal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, complete all as specified and directed.

M&L for priming plastered and other surface of ceiling with alkali resistant priming paint, complete all as specified and directed.

M&L for applying one coat of Altec putty finish to obtain a smooth finished surface and preparation of ceiling surfaces, complete all as specified and directed.

M&L for applying two coats of distempering to ceiling with distemper oil emulsion, complete all as specified and directed.

S&F in repairs, 12mm thick Gypsum board as in ceiling fixed with screws all as manufacturers instructions and including preparation of new ceiling surfaces and applying of two coats of oil bound distemper, complete all as specified and directed.

Taking down old pelmet box of any description and any size, complete all as specified and directed.

M&L for 25mm dia Stainless Steel Curtain Rod fancy type, in repairs, complete all as specified and directed.

M&L for Brackets, Ends Cap and Holder suitable for 25mm dia Stainless Steel Curtain Rod fancy type, in repairs, complete all as specified and directed.

S&F PVC wall cabinet (430mmx330mm) with single door, complete all as specified and directed. Make: Prayag or equivalent as approved by GE.

Dismantiling boarding any description fixed in any position with screws, complete all as specified and directed.

Dismantiling wooden fillets under 40 Sqcm in section, fixed in any position, complete all as specified and as directed.

M&L for Second class soft wooden plain fillets square or rectangular in section (Exceeding 13 Sqcm & not exceeding 25 Sqcm), complete all as specified and directed.

M&L for Veneered decorative plywood of 12 mm thick, grade 1 (with BWR resin) with decorative face on one side fixed with screws to timber frame work, complete all as specified and directed.

M&L for French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats, complete all as specified and directed.

S&F external teak wood lipping, 6mm thick, fixed with nails to prelaminated particle board, complete all as specified and directed.

M&L for 18/19 mm thick Prelaminatd particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, complete all as specified and directed.

S&F MS powder coated magnet catcher 25 mm long for Cup board shutter, complete all as specified and directed.

S&F 65mm long MS butt hinges, medium weight cold rolled, complete all as specified and directed.

S&F Aluminium handles, cast type, anodised 100 mm, complete all as specified and directed.

Taking down cement plastering on concrete/masonary surfaces including racking out joints hacking for keys and scrubbing down with water, complete all as specified and directed.

M&L for Rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surface including finishing the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over with alkaliresistant priming paint, complete all as specified and directed.

SRI SAI CONSTRUCTIONS