Loading…
Loading…
Tender Value
₹52.1 L
EMD Value
₹1.0 L
Closing Date
17 Aug 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
65 days
Expenditure
Capital (Works)
Above/Below/Par
SIGNAL
15 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i) Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii) Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii) One similar work costing not less than the amount equal to 60% of advertised value of the tender.
Work experience certificate from private individual shall not be considered. However, in addition to work experience certificates issued by any Govt. Organisation, work experience certificate issued by Public listed company having average annual turnover of Rs 500 crore and above in last 3 financial years excluding the current financial year, listed on National Stock Exchange or Bombay Stock Exchange, incorporated/registered at least 5 years prior to the date of opening of tender, shall also be considered provided the work experience certificate has been issued by a person authorized by the Public listed company to issue such certificates. In case tenderer submits work experience certificate issued by public listed company, the tenderer shall also submit along with work experience certificate, the relevant copy of work order, bill of quantities, bill wise details of payment received duly certified by Chartered Accountant, TDS certificates for all payments received and copy of final/last bill paid by company in support of above work experience certificate.
Defination of Similar Work :- Any kind of Signaling works of indoor or outdoor with supply of signaling materials.
42 conditions · 5 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
GST Registration details should be attached
Tenderers will examine the various provisions of The Central Goods and Services Tax Act, 2017(CGST)/ Integrated Goods and Services Tax Act, 2017(IGST)/ Union Territory Goods and Services Tax Act, 2017(UTGST)/ respective state's State Goods and Services Tax Act (SGST) also, as notified by Central/State Govt & as amended from time to time and applicable taxes before bidding. Tenderers will ensure that full benefit of Input Tax Credit (ITC) likely to be availed by them is duly considered while quoting rates.
The successful tenderer who is liable to be registered under GST/IGST/ UTGST/SGST Act shall submit GSTIN along with other details required under CGST/IGST/ UTGST/ SGST Act to railway immediately after the award of contract, without which no payment shall be released to the contractor. The contractor shall be responsible for deposition of applicable GST to the concerned authority.
In case the successful tenderer is not liable to be registered under GST/IGST/UTGST/ SGST Act, the railway shall deduct the applicable GST from his/their bills under reverse charge mechanism (RCM) and deposit the same to the concerned authority.
Every tenderer shall state in the tender his postal address fully and clearly. Any communication sent in time to the tenderer by post at the said address shall be deemed to have reached the tender duly and in time. Important documents shall be sent by Registered post.
The provision of Construction and Demolition Waste Management Rule 2016 issued by Ministry of Environment Forest and Climate Change dated 29.03.2016 and published in the Gazette of India, Part - II, Section -3, Subsection (ii) are binding upon the Contractor. Contractor shall implement these provisions at worksites, for which no extra payment will be payable.
Before submitting a tender, the tenderer will be deemed to have satisfied himself by actual inspection of the site and locality of the works, that all conditions liable to be encountered during the execution of the works are taken into account and that the rates he enters in the tender forms are adequate and all inclusive to accord with the provisions in Clause-37 of the Standard General Conditions of Contract for the completion of works to the entire satisfaction of the Engineer
The Railway reserves the right to verify all statements, information and documents submitted by the bidder in his tender offer, and the bidder shall, when so required by the Railway, make available all such information, evidence and documents as may be necessary for such verification. Any such verification or lack of such verification, by the railway shall not relieve the bidder of its obligations or liabilities hereunder nor will it affect any rights of the railway there under.
The following documents should be submitted by the tenderer on issue of LOA and before signing Contract Agreement:-.
The documents pertaining to Deployment of Qualified Engineers at Work Sites by the Contractor.
EPF & ESI Registration certificate should be submitted before signing of Contract Agreement.
Price variation clause (PVC) shall be applicable only in tender having advertised value above Rs. 2 crore provided further that, in the tender document PVC is applicable.
All the Terms and Conditions in this contract is as per Indian Railways Standard General Conditions of Contract updated with correction slips issued up to date of inviting tender or as otherwise specified in the tender documents
If the tenderer(s) expire(s) after the submission of his / their tender or after the acceptance of his / their offer, the Railway shall deem such tender cancelled. If a partner of a firm expires after the submission of their tender or after the acceptance of their tender, the Railway shall deem such tender as cancelled, unless the firm retains its character.
Contractor is to abide by the provisions of Payment of Wages act & Minimum Wages act in terms of clause 54 and 55 of Indian Railways General Condition of Contract. In order to ensure the same, an application has been developed and hosted on website 'www.shramikkalyan.indianrailways. gov. in'. Contractor shall register his firm/company etc. and upload requisite details of labour and their payment in this portal. These details shall be available in public domain. The Registration / updation of Portal shall be done as under:-
Contractor shall apply for onetime registration of his company/firm etc. in the Shramikkalyan portal with requisite details subsequent to issue of Letter of Acceptance. Engineer shall approve the contractor's registration in the portal within 7 days of receipt of such request.
Contractor once approved by any Engineer, can create password with login ID(PAN No.) for subsequent use of portal for all Letter of Acceptances (LoAs) issued in his favour.
The contractor once registered on the portal, shall provide details of his Letter of Acceptances (LoAs) / Contract Agreements on shramikkalyan portal within 15 days of issue of any LoA for approval of concerned Engineer. Engineer shall update (if required) and approve the details of LoA filled by contractor within 7 days of receipt of such request.
After approval of LoA by Engineer, contractor shall fill the salient details of contract labours engaged in the contract and ensure updating of each wage payment to them on shramikkalyan portal on monthly basis.
It shall be mandatory upon the contractor to ensure correct and prompt uploading of all salient details of engaged contractual labour & payments made thereof after each wage period.
While processing payment of any 'On Account Bill' or 'Final Bill' or release of 'Advances' or 'Performance Guarantee / Security deposit', contractor shall submit a certificate to the Engineer or Engineer's representatives that "I have uploaded the correct details of contract labours engaged in connection with this contract and payments made to them during the wage period in Railway's Shramikkalyan portal at 'www.shramikkalyan. indianrailways.gov.in' till Month, Year."
Associate signalling works in connection with BG Through turnout renewal (without sleepers) (Total-137 sets) in GHY- LMG and BG Through turnout renewal (with sleepers) (Total- 32 sets) in LMG- JMI section (Grand Total- 169 sets) under the jurisdiction of Sr.DEN/I/LMG.
SNT-24-LMG-2026-27
SNT-24-LMG-2026-27
Open
Works - General
365 Days
Hojai, Assam
₹0
₹1.0 L
17 Aug 2026
24 Jul 2026
3 Aug 2026
46 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 10,43,086.7 | ||
| — | 20.00 | — | — | ||
| Track Feed Resistance - Porceilin base 30 ohm as per Drg No.SA-20161-66/M. | — | — | — | 5,597 | |
| — | 10.00 | — | — | ||
| Relay ACI, Plug-in-type, Style QTA2, Neutral Track, 9 ohms, 2F/1B , conforming to BRS: 939A & 966 (Appendix F2) IRS:S 34 & IRS:S 23 as applicable (interlocking pin code FGHKX). | — | — | — | 43,731.6 | |
| — | 10.00 | — | — | ||
| TCT Annular Rail Drill Diameter 7.14mm • Made using High Quality Ultrafine particle Tungsten Carbide raw material having superior bending strength and impact tenacity • Special cutter edge geometry for steel rail ensures the cutting force is small and cutting Speed is fast, resulting in the cutter regaining good strength & sharpness during drilling. Make- Broachcutter or similar | — | — | — | 21,990 | |
| — | 2.00 | — | — | ||
| TCT Annular Rail Drill Diameter 14mm X Length 25mm • Made using High Quality Ultrafine particle Tungsten Carbide raw material having superior bending strength and impact tenacity • Special cutter edge geometry for steel rail ensures the cutting force is small and cutting Speed is fast, resulting in the cutter regaining good strength & sharpness during drilling. Make- Broachcutter or similar | — | — | — | 16,461.18 | |
| — | 2.00 | — | — | ||
| Pilot Pin - Diameter 6.35mm X Length 77mm Necessary for locating centre punch, opening flow of coolant and ejecting the slug after the drilling is completed | — | — | — | 1,377.76 | |
| — | 30.00 | — | — | ||
| Supply of Drill bit 7.2 mm (9/32") dia make- JK or superior. | — | — | — | 7,261.5 | |
| — | 30.00 | — | — | ||
| Supply of Hydrometer Thimson or similar superior quality. | — | — | — | 6,255 | |
| — | 5.00 | — | — | ||
| Automatic change over system of Track Feed battery Charger model No. BE-TFBC ultra electronics make or similar as per TS | — | — | — | 34,612.25 | |
| — | 1.00 | — | — | ||
| Track drill bonding machine cycle chain type. | — | — | — | 12,397.77 | |
| — | 50.00 | — | — | ||
| Supply of insulating varnish paint for painting over glued joints as per TS | — | — | — | 49,950 | |
| — | 200.00 | — | — | ||
| G.I. wire soft 8 SWG (4 mm dia) as per IS-279/72 or latest amendment suitable for track circuit rail bonding. | — | — | — | 19,678 | |
| — | 2500.00 | — | — | ||
| Pin channel single groove 7.2 mm dia (9/32") suitable for 4 mm dia bond wires. | — | — | — | 13,400 | |
| — | 200.00 | — | — | ||
| Insulated 8 SWG GI wire soft suitable for track jumper as per IS:280/78 or latest | — | — | — | 26,672 | |
| — | 20.00 | — | — | ||
| Track lead junction Box as per Drg. No.RST-11509 made of FRP materials conforming to RDSO/SPN/151/97 or latest complete with terminal blocks & links along with FRP Stump for mounting FRP assembly made of FRP Angle 30 x 30 x 4 mm - 1 mtr long (2 Nos) & 12 inch long (1 No.) along with Hardware as per TS. | — | — | — | 30,246.2 | |
| — | 2.00 | — | — | ||
| Under ground Railway Signalling cable 12 core x 1.5 sq. mm Copper Conductor PVC insulated Armoured Unscreened, Under Ground cable to spec. no. IRS:S-63/2014 (Rev.4) or latest | — | — | — | 4,69,640 | |
| — | 12.00 | — | — | ||
| Outsourcing of Unskilled ManPower for assisting JE/SSE in execution of work per TS | — | — | — | 2,83,816.44 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Tender Document
ATTACHMENT
BankGuaranteee-
ATTACHMENT
TenderDocumentSNT-24-LMG-2026-27TTR169Nos.pdf
ATTACHMENT
Acceptanceofe-BankGuaranteee-BGinWorksContracts.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .