SPECIAL REPAIRS TO BLDG NO P-86 AT DEPOT BN MEG AND C AND P-96 AT MT SQUARE UNDER GE (NORTH) BENGALURU

Amount

Dismantling of Single Layer Mangalore pattern roofing tiling including ridges bedded in cement mortar etc complete all as specified and as directed

Dismantling of Battern for tiles, shingles etc of any size including tilting fillets spaced exc 15 cm etc complete all as specified and as directed

Dismantling timber scantlings 40 sq. cm and over in section, in any position as in framed work etc complete all as specified and as directed

Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.

Demoltion of Cement Concrete (Un-reinforced) of any description and in any position not otherwise specifically provided for etc complete all as specified and as directed

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and as directed

Dismantling of stone slabs and tiles of any description or thickness in floors, approaches, dado/Partitions etc complete all as specified and as directed

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises etc complete all as specified and as directed

Demolition of brick work /stone masonry/PCC block masonry built in cement mortar of any description all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) area not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc including making good the disturbed surface to match adjoining surfaces all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) area exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc including making good the disturbed surface to match adjoining surfaces all as specified and directed.

Taking down shutters of any description area n exc 1.00 Sqm each etc complete all as specified and as directed

Dismantling of timber scantlings in unframed work fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section description complete all as specified and directed.

Taking down steel tubing & connections including accessories of 15mm dia bore complete all as specified and as directed

Taking down steel tubing & connections including accessories of 20mm dia bore complete all as specified and as directed

Taking down steel tubing & connections including accessories of 25mm dia bore complete all as specified and as directed

Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed

Dismantling of cast iron or reinforced concrete or PVC (SWR) drain pipe up to 150 mm dia including fittings, jointed in cement mortar and taking out from trenches/floor/wall etc complete all as specified and directed

Dismantling water tanks exc 500ltr but not exc 1000 ltr etc complete all as specified and as directed

M&L for Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc including box section etc complete all as specified and as directed

S&F Hollow /Solid steel section for structural use in beams, column, rafter purlins or other connecting plates including necessary welding, riveting, nut bolts as per IS-4923 etc complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick, 150AZ, of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws etc complete all as specified and as directed

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA, 150AZ, as in roof covering/cladding ridges under valley to wall, fixed with self tapping screws etc complete all as specified and as directed

M&L for Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in 100 mm thick sub base for path and flooring etc all as specified and as directed

M&L for Plain cement concrete (1:4:8) type D- 2 using 40mm graded stone aggregate as in 75 mm thick sub base to flooing etc complete all as specified and as directed

M&L for Plain cement concrete type (1:2:4) B-0 using 12.5 mm graded stone aggregates as in 25 mm thick as in sub base to flooring etc complete all as specified and as directed

M&L for screed bed 15mm thick in cement mortar (1:6) for laying floor finishes complete all as specified and as directed.

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M & L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete all as specified and as directed

M&L for rendering 10 mm thick in cement mortar (1:3) on fair faces of brick work or concrete surface as backing coat to dado/skirting etc complete all as specified and as directed

M&L Glazed ceramic coloured tiles 300X450X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match etc complete all as specified and and as directed

M&L for PCC (1:3:6) type C-1 using 20 mm graded stone aggregates as in 75 mm thick plinth protection finished even and smooth without using extra cement including joints filling with sealing compound Grade "A" complete all as specified and directed.

M & L for Vitrified Ceramic tiles 8 to 10 mm thick coluored tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cement mortar ( 1:6) including dismantling floor etc complete all as specified and as directed

M & L for Vitrified Ceramic tiles 8 to 10 mm thick coluored tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting / dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick screed bed in cement mortar ( 1:4) including dismantling wall tiling etc complete all as specified and as directed

M&L for Granite stone slab 18 to 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.including grinding the edges half round and polishing including etc complete all as specified and directed.

M&L for Sand filling under floors or in foundations including watering and consolidation complate all as specified and directed .

M&L for Machine pressed precast cement concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and as directed .

M & L for Glazed ceramic coloured tiles 350 X 250 X 7mm / 450 X350 X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match including backing coat 10 mm thick in cement mortar (1:4) including dismantling wall tiling etc complete all as specified and as directed

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, walls, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed

M&L for Mild steel TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips all as specified and as directed

M&L for Pre-cast Cement concrete (1:3:6 ) Type C-1 using 20 mm graded stone aggregates as in solid block masonary exc 10cm in width and setting in cement mortar (1:6) all as specified and directed.

M&L for Precast cement concrete (1:2:4) Type B-1 using 20 mm graded stone aggregates as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar (1:6) etc complete etc complete all as specified and as directed

M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for flat rough finished surfaces complete all as specified and directed.

M&L for Reinforced Cement Concrete, Nominal mix, (1:1.5:3) type A-1 using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed.

M&L for Reinforced Cement Concrete, Nominal mix, (1:2:4) type B-1 using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and directed.

S&F Factory made Pressed steel door frame of size 125 X 60 mm, made of 1.25 mm thick M S sheet, with one or more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

S&F Factory made Pressed steel door frame of size 105 X 60 mm, made of 1.25 mm thick M S sheet with one or more rebate includings necessary fixing lugs, hinges, locks strike plate etc complete all as specified and as directed

M&L for Plain cement concrete (1:3:6) type C-0 using 12.5mm graded stone aggregate as in hold fast block and filling under pressed steel frame etc complete all as specified and as directed

M&L for Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 gde E-165 etc complete all as specified and as directed

S&F Flush door shutter 35mm thick solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed

M & L for Glazed and skeleton shutters, factory made second class hardwood 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitered beads for securing glass,\etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and as directed

S&F in repairs Block boards 18/19mm thick, grade 1 quality, exterior grade, commercial type, Water proof, termite proof, fixed with screws to timber frame-work as in cub board shutter, shelves etc complete all as specified and as directed

M&L for Decorative laminate type 1, 0.90 mm thick of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer instructions, fixed to door/cub board shutter including teak wood beading 3mm thick and 18 mm wide including painting to match the existing colour etc complete all as specified and as directed

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening as per specification complete as sepecified and directed.

S&F Factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.

S & F in repairs Prelaminated particle board 18/19mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work,fixed in kitchen Cabinet or cupboards all as specified.

M&L for Plain fillets square, rectangular or triangular in section clean sawn , secured with nails or brads of second class hard wood fixed to cupboard shutter not exc 3 sqcm cross section area all as specified and directed.

M&L for Plain fillets square, rectangular or triangular in section clean sawn , secured with nails or brads of second class hard wood fixed to cupboard shutter exc 6 sqcm but not exc 13 sqcm cross section area all as specified and directed.

S & F in repairs cupboard knob 40 mm dia fixed with nut, screw and washer of brass, polished complete all as specified and as directed.

S & F in repairs Continuous (piano) hinges, 30 mm width of flap (when open), mild steel, bright finish or electro galvanised etc complete all as specified and as directed

S&F Aluminium frame for doors, windows, ventilators duly Powder Coated (minimum thickness of powder coating 50 micron) with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed

S&F Aluminium window and ventilator shutters duly powder Coated (minimum thickness of powder coating 50 micron), Sliding type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and as directed

S&F Powder coated aluminium ventilators with louvers and glazing including frame, over all size of ventilator 600X 450mm, complete with following specification all as specified & directed :- . (a) Aluminium frames of size 63.5x38.1x1.5mm (b) 4.80mm thick frosted sheet glass Note :- All ventilators/louvers member including fitting & fixture shall be deem to be included in quoted rate. Opening size of ventilators/louvers shall be measured for payment.

Supply and fix Aluminium anodised (powder coated) Three track sliding window frame with shutters with 2 nos glazed and one wire gauzed shutter, (Frame shall be 92x 31.75 x1.5mm, shutter section shall not be less than0.55kg/RM) including all necessary joining cleats, hold fast, rubber gasket, snap beading and locking arrangements fixed with screws to wall etc. with glazing 5 mm thick tinted glass using rubber gasket and stainless steel wire cloth of 0.36 mm dia & average width of aperture 1.40mm with staple or suitable fillets wire mesh fitted with screws and washers etc complete all as specified and as directed :-

S&F Sheet glass ordinary quality 4mm thick and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed

S&F Figured glass 4mm thick, pin head type and glazing with oil putty in squares n exc 0.5 sq.m in each pane etc omplete all as specified and as directed

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire staple etc complete all as secified and as directed

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F Butt hinges 100 mm size, medium weight, stainless steel and fixed etc complete all as specified and as directed

S&F Aluminium handle 150 mm size, cast type, anodised etc complete all as specified and as directed

S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 150 mm, fixed in floor etc complete all as specified and as directed

S&F Hasp and staple 100 mm size, Aluminium made, safety type, mild steel hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and as directed

S&F in repairs stainless steel decorative curtain rod of 25 mm dia bore with wood finishes (weight not less 400 gms per running meter) incl fancy finale caps cap etc complete all as specified and as directed

S&F in repair Bracket for curtain rod of 25 mm dia made out of stainless steel flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed

S&F Aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed

S&F in repair Sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm, bowl size 410mm x 330mm x 160mm,etc complete all as specified and as directed

S&F in repairs European Water Closet (Pedestal pattern) vitreous china Ivory colour, with suitable size closing seat cover, of size 560X 530X 380mm with S Trap including connection to out going pipe, flushing pipe complete all as specified and as directed.

S&F in repair vitreous china wash hand basin, flat back size 550x400 Ivory colour including 32 mm dia brass chromium plated waste fitting, PVC waste pipe 610 mm long and PVC connection 450 mm long 15mm dia with PTMT nuts complete all as specified and as directed

S&F in repairs PVC duo flushing cistern 10 Ltr capacity white, low level with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc including PVC connection 450 mm long 15mm dia with PTMT nuts complete all as specified and as directed.

S&F in repairs Bib cock long body with flange, fancy type, cast copper alloy chromium plated with capstan head screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed

S&F in repair Bib taps, Fancy type, brass Chromium plated with capstan head, screwed down, screwed for iron pipe 15mm dia bore or for brass ferrule etc complete all as specified and as directed

S&F in repair wall mixer with L Bend (with provision of hand shower) brass chromium plated for mixing hot and cold water screwed down for iron pipe 15mm dai bore and fixed complete all as specified and directed.

S & F in repairs central hole basin mixer without pop up, brass chromium plated, (9" spout) fixed to 15mm dia bore pipes all as specified and as directed. (Make : Prayag cat no 9350 or equlavent make specified in P S herein after)

S&F in repairs Angular stop cock with flange, fancy type, chromium plated cast copper alloy screwed down high pressure with crutch fixed for 15 mm dia bore pipe complete all as specified and as directed

S & F PVC connection 15 mm dia 450mm long with PTMT nuts all as specified and as directed.

S&F in repair Corner Glass Shelf 300mm with Brass Bracket etc complete all as specified and as directed. (Make : Prayag cat no BEA-44 or equlavent make specified in P S herein after)

S&F in repairs soap dish holder with glass, brass chromium plated etc complete all as specified and as directed

S&F in repairs overhead round rain shower 200mm without arm, brass chromium plated fixed to 15mm dia pipe etc complete all as specified and as directed

S&F in repairs Hand shower (Health faucet) (ABS Body) with 8 mm dia, 1.20 mtr long flexible tube & wall hook etc complete all as specified and as directed

S&F in repairs Jet spray suitable for EWC / Ango Indian EWC, brass chromium plated including fitting etc complete all as specified and as directed.

S & F in repairs Sink mixer with regular spout, wall mounted, brass chromium plated fixed to 15mm dia bore pipe all as specified and as directed.

S&F in repairs 112mm overhead shower ABS with stainless steel Arm (225mm) & flange including fixing to steel pipe 15mm dia bore or union complete all as specified and as directed. (Make : Prayag cat No BS-67 or equivalent make as specified in P S herein after)

S & F in repairs Bib Cock 2 way, double handle with CP flange fixed to iron pipe 15mm dia all as specified and as directed.

S&F in repairs Health faucet, brass body chromium plated with 1mtr stainless steel braided tube & wall hook complete all as specified and as directed

S&F in repairs Soap dish chromium plated brass fixed to wall complete all as specified and as directed. (Make : Prayag cat Part No BA-45 or equivlaent makes as specified ion P S herein after).

S&F in repairs Bathroom Cabinet Mirror of moulded PVC of size 431.80mm x 355.60mm including fixing to wall all as directed.

S&F in repairs Stainless steel plate rack of size 990.60mm x 914.40mm made of 0.63mm thick stailess steel sheet including fixing to wall etc complete all as specified and as directed

S&F in repairs stainless steel Grab bar Towel rail 450 mm long including fixing arrangement etc complete all as specified and as directed.

S&F in repairs Towel ring brass chromium plated including fixing arrangement etc complete all as specified and as directed. (Make : Prayag cat no BA-41 or equlavent make specified in P S herein after)

S&F in repairs Peg set of six, brass chromium plated fixed on wall as per manufacturers instruction all as specified and as directed. (Cat No BEA 30 of Prayag or equivalent make of CA)

S & F CPVC pipe 20mm outer dia, SDR 11 & Plain CPVC SDR 11 fittings concealed in walls / ceiling or laying in floors etc complete all as specified. (Note : Quoted rate deemed to be included the cutting wall for concealing pipe)

S & F CPVC pipe 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors etc complete all as specified & directed.

S & F CPVC pipes 16mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors including cutting holes for concealing the pipes in stone / brick masonry complete all as specified & directed.

S&F Rotational moulded Polyethelene water storage tank 1000ltrs capacity, three layered conforming to IS-12701(1989) cylindrical vertical type, closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I etc completge all as specified and as directed

S & F Ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe 25 mm dia of bore complete all as specified and as directed. (Minimum weight for 25mm-455gms) .

S & F in repairs Gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe 25 mm dia bore including taking down old gate valve all as specified and as directed.

S&F PVC connection 600mm long 15mm dia with PTMT nuts complete all as specified & directed.

S&F in repairs PVC (SWR) Multi floor trap 75 mm dia outlet, plain with grating including jointing with solvent cement etc complete all as specified and as directed

S&F PVC (SWR) pipes 110 mm dia bore single socketed in any length with rubber ring joint laid in trenches or in floor etc complete all as specified and directed

S&F PVC (SWR) pipes 110 mm dia bore single socketed in any length with rubber ring joint fixed on walls etc complete all as specified and directed

S&F PVC (SWR) pipes 75 mm dia bore single socketed in any length with rubber ring joint laid in trenches or in floors etc complete all as specified and directed

S&F PVC, SWR pipes 75 mm dia bore single socketed in any length with rubber ring joint fixed on walls etc complete all as specified and directed

S&F PVC bends (any radius) of 110mm dia all as specified and directed

S&F 110 mm dia PVC (SWR) bends (any radius) with acess door etc complete all as specified and as directed

S&F PVC bends (any radius) of 75mm dia all as specified and directed

S&F 75mm PVC (SWR) bends (any radius) with acess door etc complete all as specified and as directed

S&F PVC vent cowls of 110mm dia all as specified and directed

S&F 75 mm dia bore PVC (SWR) vent cowls all as specified and directed

S&F in repairs for Grating doom 100 mm dia of PTMT complete all as specified and directed. (Minimum weight 25 gms)

M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surface finsihed even and smooth without using extra cement etc complete all as specified and as directed

M&L for rendering 15 mm thick cement mortar (1:4) on fair faces of brick work or concrete surface finsihed even and smooth without using extra cement mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates as in copings, Chajja kerbs, roof padding/staging of water tank etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

Supply only water proofing compound (Liquid), ISI marked complete all as specified and as directed.

M&L for complete removal of existing treatment of wall surface usingwire brush and sand paper complete all as specified and as directed.

M&L for Preparation the new or old surface and applying 1mm thick wall care putty finished to smooth surface etc. complete all as specified and as directed.

M&L for Preparing new treated suface of walls and applying two coats distemper acrylic emulsion over a coat of self primer complete all as specified and as directed

M&L for Preparing old treated suface of walls and applying two coats distemper acrylic emulsion complete all as specified and as directed

M&L for preparing newely plastered surface of wall and applying two coat of cement base paint over a coat of alkali resistant primer etc complete all as specified and as directed

M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed

M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed

M&L Preparing new or Old Previously untreated plastered surface of wall and Applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including filling the cracks etc with crack filling material as per manufacturers instructions complete all as specified and as directed.

M&L for Preparation of old treated / painted wooden surfaces of any description, over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and as directed

M&L for Preparation of new wooden surfaces of any description, over 10 cm in width or girth and applying two coats of synthetic enamel paint ove one coat of pink primer etc complete all as specified and as directed

S&F False ceiling with grid suspended system of size 600X600mm standard section consisting of main runner 29X24.70X0.80mm, cross Tee 29X24.70X0.80mm and wall angle 22.2 X22.2X0.65, ceiling suspended with 3mm dia GI wire hanger fixed with steel dash fastener, butter fly clips, hold down clips etc (Main corner, cross tee& wall angle of MS galvanized with PPPCGS) including 4 mm thick HPSC self textured design pre primered non asbestons fibre cement building boards fixed to false ceiling etc complete all as specified and as directed

Dismantling of wall and ceiling boards any thickness of any description including cover fillets complete all as specified and directed.

S&F in position suspended false ceiling using E- grid suspended ceiling grid system of grid size 600x600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross Tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24mm x 3mm using 4mm thick high pressure stream cured classic variant E-board, designer pattern (ISI marked, IS No 14862-2000) fibre cement E board to be placed in the grid suspended by 4mm GI wire hangers from the purlins of the roof with butter fly clips, complete all as specified and directed.

M&L for cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick, exterior grade, coloured glossy finish rubber pressed, set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc including painting with same colour of the back ground complete all as specified and as directed.

M & L for Point Wiring with 1.5 Sqmm single core PVC insulated unsheathed FRLS copper cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit with accessories surface type type run on walls/ ceiling including MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly for the following all as specified and as directed:-

One light / fan point controlled by one switch

One 3 pin socket out let 5 Amps on independent board

One 3 pin socket out let 5 Amps on same board

One Bell / Buzzer Point controlled by bell push

M & L for Point Wiring with 2.5 Sqmm single core PVC insulated unsheathed FRLS cable 1100 volts grade multi stranded with copper conductor conforming to IS 694 drawn through and including non-metalic rigid PVC conduit with accessories surface type run on walls/ ceiling including MS terminal boxes fabricated with 1.6 mm thick MS sheet surface mounted/ concealed on walls with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch socket outlets, fan regulators etc., including provision of 2.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.

Note for Item No 143 & 144 :- (i) The earth wire for the points in the same circuit can be looped from point to point. (ii) Earth wire shall be taken inside the conduit. (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring. (iv) Cost of a circuit of any length of cable from DB to any switch/ socket board to be included in point wiring. (v) Cost of cutting chases for conduits and making good to walls, in case of recessed or concealed conduit wiring will be included in point wiring.

S&F in repair LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fittings all as specified and directed. (Make: Bajaj Cat No. BCLAB 20 W LED P S or equivalent Makes specified in P S herein after)

S&F in repair LED batten suitable for indoor applications 10 Watts, 2 feet with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fittings all as specified and directed. ( Make: Bajaj, Cat No. BCLSB 10 W WH or equivalent Makes specified in P S herein after)

S&F in repair decorative, wall mounting ,champagne gold finish fixture with plastic body suitable for 9 watt LED lamp B22 base all as specified and directed.

S&F Ceiling fans with complete accessories, 230Volts, SP 1200 mm Sweep with BEE 5 Star rating complete with all accessories and fixing the fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm, etc all as specified and as directed.

S&F in repair Switch piano flush type single pole one way 5Amps all as specified and as directed.

S&F in repair of Ding Dong bell AC 230 volts single pole all as specified and as directed.

S&F in repair of bell push, flush type 5Amps, 230volts all as specified and as directed .

S&Fin repair of stepped type electronic fan regulator flush Switch/socket type, 230volts all as specified and as directed

S&F in repair Switch socket combination 2 in 1 , 5 Amps flush type, 230volts all as specified and as directed

S&F in repair of switch socket combination 2 in 1, 3 pin 5 and 15 Amps flush type universal all as specified and as directed

S&F in repairs MCB SPN 240 volts 32/40 Amps, C curves complete all as specified and as directed

S&F in replacement MCB single pole 240 volts 10/16/20/32 Amps, C curves complete all as specified and as directed

S&F in replacement of MCB distribution board SPN 12 way, double door type, 240 volts with 200 Amps rated busbar as specified and as directed.

S&F Storage type water heater 25 Ltrs capacity, BEE 5 star rated complete including steel wired pipe for hot/cold water connection for inlet and out let water etc complete all as specified and directed at site .

S&F in replacement of MCB Distribution board TPN 4 way, double door type, 240 volts with 200 Amps rated busbar as specified and as directed.

S&F in replacement of MCB TPN 415 volts 10 KA , 63 Amps, C curves complete all as specified and as directed

Excavation in trenches in hard/dense soil not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of cables/errection of pole etc complete all as specified and as directed.

Returning, filling in trenches including spreading leveling watering and well ramming in layers with soil not exc 25 cm thick in each layer complete as specified and as directed

Removing excavated soil to a distance not exc 50m and deposited at a level n. exc1.5 mtr above the starting point complete all as specified and as directed

M & L for sand cushioning with a layer of river sand 23 cm thick under and above the cable all as per Para 19.75 of SSR Part-I complete all as specified and as directed

Supply & laying sub class 'B' burnt bricks for cable protection all as per Para 19.75 of SSR Part-I and removing old broken bricks complete as specified as directed

Supply & laying XLPE insulated screened PVC bedded galvanised steel strip or wire armored,electric power cable 4 Core x 25 Sqmm (heavy duty) 1100 Volts grade with stranded aluminium conductor connected with suitable lugs including taking out the existing unserviceable cable all as specified and as directed

S&F in repairs ceiling rose, surface bakelite type, 65 x 50 mm, 2 to 3 terminals all as specified and as directed

M & L for sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 6 Sqmm along with 6 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with suitable size of PVC casing caping all as specified and as directed. (Note : Three run 6sqmm cable and one run PVC casing & caping altogether measured as one unit)

M&L for earthing with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I and as specified or indicated and testing on completion including necessary earth work and excavation in any type of soil, PCC (1:3:6) type C1 chamber, pre cast RCC (1:2:4) type B1 slab 40mm thick with 8 mm dia TMT bars reinforced at 10 cm centre to centre both ways, funnel with G I medium grade watering pipe, G I protection pipe, wire mesh, lugs, including test point complete all as specified and as directed.

Supply and fixing LED bldg security light fitting 30 Watts with pressure die cast housing along with prismatic polycarbonate difuser with IP 66 protection including taking out old fittings complete all as specified and as directed. ( Make:- Bajaj, Cat No.:- ENXT P 30L WH PO PC SD MT or equivalent Makes specified in P S herein after)

S&F G I Bracket made out of GI tubing medium grade 25 mm bore , approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm , nuts, bolts, washers etc and including applying two coats of aluminum paint over a coat of red oxide primer including removing the old existing GI bracket from bldg complete all as specified and directed.

Supply and fix Exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete including necessary core cutting in block masonary wall for installation etc complete all as specified and directed.

S&F in repair PVC Fresh air fan of 200/225mm sweep 1200/1400 RPM with louver including necessary core cutting in block masonary wall for installation all as specified and directed.

Taking up / down un-serviceable cracked HDPE pipes from treches/wall all as specified & directed:-

50 mm dia

25 mm dia

S&F Galvanised Iron water tubing medium grade with all fitting laid in trenches/fixed on wall of following sizes

50 mm dia

25 mm dia

M&L for Gun metal, globe or gate valves, with iron wheel head.screwed both ends for iron pipe 50 mm dia and fixed after taking out old /rusted valve all as specified and directed.

M&L for Gun metal,globe or gate valves,with iron wheel head screwed both ends for iron pipe 25 mm dia and fixed after taking out old /rusted valve all as specified and directed.

Sreyas Enterprises (BID ID -3442989)

Ashraya Nirman (BID ID -3446712)

PRIYADARSHINI CONSTRUCTIONS (BID ID -3444445)

K. VENKATESH NAIDU (BID ID -3452542)

Sathya Sri Construction (BID ID -3446502)

PRAGATHI BUILDERS (BID ID -3451110)