Up-gradation District Hospital at Aalo (60 Bedded) in West Siang District

Amount

Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.

Providing & laying cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 stone aggregate 40mm nominal size) excluding cost of centering & shuttering. a) Foundations and plinth

Providing and laying damp proof course 50 mm thick with cement concrete 1: 2 : 4 (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size).

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications E) RCC Grade M25 Using concrete Mixer

Reinforcement of RCC work including bending, binding and placing in position complete. (Fe-500) a) Cold twisted bars.

Centring and shuttering including strutting, propping etc and removal of form work for :

a) Foundation, footings, bases of columns etc. and mass concrete.

b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

c) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).

d) Lintels, beams, girders, bressumers and cantilevers etc.

e) Column, pillars, posts and struts etc.

f) Stairs (excluding landings) except spiral stair cases.

Brick work with best available local bricks in foundations and plinth in cement mortar 1:5 (1 cement : 5 fine sand).

Extra for brick work with best available local bricks in superstructure above plinth level up to floor two level.

Half brick masonry (with best available local bricks) in cement mortar 1:4 (1 cement : 4 coarse sand) in foundation and plinth.

Extra for half brick masonry in superstructure above plinth level and up to floor two level.

Providing and fixing factory made uPVC white colour casement/ Casement cum fixed glazed door comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealent shall be paid separately). Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm).

Float glass panes . 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).

Providing, fitting and fixing anodised aluminium hollow section of approved brand (Indal section 9210) of size 63.50mm x 38.10mm x 2.5mm thick for aluminium frame partition wall, with a maximum spacing of frame 1.20m for horizontal/vertical member including aluminium cleat 32mm x 50mm x 4mm thick and fixing of pre-laminated board/ Nepal board/ Bhutan board with tapper cleat 20mm x 15mm x 1.2mm thick as directed by the department at all levels. (i) 6mm clear glass

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).

Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. 125 mm

Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete.

Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately).

Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete

Metaflex makes HPL Skin Insulated Clean Room Door Double Leaf with 44 mm Door panel thickness and 8mm HPL with pressure injected High Grade 36mm PU(density 45kg/m3) as Door Blade core material, Door Wall Frame 2.5mm Thick AI 6063 Anodized Aluminium with 2.0mm Thick GI Reinforcement, Rubber Gasket Non Particle Shredding Type Seal, Double Insulated Glass Vison panel 300x300mm, Ball Bearing Hinges, Door Closer on active leaf, Door Lock and SS 304 Door Handle D-Type for smooth passage. Size : 1500x2100mm

Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 60 minutes of fire resistance both integrity & radiation control (EW60) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm.

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm)

Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)

Float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm).

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer welded and bolted including special shaped washers etc complete (welding to be paid separately).

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing and fixing MS fan clamp type I of 16 mm dia MS bar bent to shape with hooked ends in RCC slabs during laying including painting the exposed portion of loop all as per standard design complete.

Providing and laying vitrified floor tiles in different sizes (Thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved make, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 coarse sand ), including grouting the joints with white cement and matching pigments etc., complete. a) Size of tiles 1000 x 1000 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. a) Size of tiles 1000 x 1000 mm

White glazed tiles 5mm.thick in flooring, skirting, risers of step and dado in 12 mm thick cement plaster 1 : 3(1 cement: 3 coarse sand) painted with white cement slurry.

Chequered terrazzo tiles 22 mm thick with marble chips of sizes upto 6mm in floors on 25 mm thick bed mortar 1 : 3 (1 cement : 3 coarse sand) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete: a) Light shades using white cement

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone shingle 20 mm nominal size) finished with a floating coat of neat cement. b) 40 mm thick

Providing and fixing Eclipse premium 2mm thk Vinyl Flooring including welding & coving

Providing and laying six courses water proofing treatment with bitumen felt over roofs consisting of first, third and fifth courses of blown or/and residual bitumen applied hot @ 1.45,1.20 & 1.45 Kg. per Sq.m. of area respectively, second & fourth courses of roofing felt type-3 grade-I (hessian base finished bitumen felt) and sixth and final course of stone grit 6 mm and down size or pea size gravel spread at 6 Cu.dm. per Sq.m. including preparation of surface excluding grading complete.

Providing corrugated Dyna sheet (Tata Brand) roofing fixed with appropriate Steenless steel screw with machine driver & as per the specification of manufacturer complete,excluding the cost of purlines, rafter & trusses. a) 0.45 mm thick Dyna sheet

Providing ridges or hips 60 cm overall in plain Dyna roof (Tata Brand) sheet fixed with J or L hooks, bolts and nuts 8 mm dia. limpet washers complete. a) 0.45 mm thick Dyna sheet

Providing and fixing Durashine zinc-Aluminium alloy coated (TATA Bluescope building product) sheet ridges fixed with necessary fasteners and lapping method as described by the manufacturer inclusive of cutting hoisting and fixing complete, excluding the cost of purlins, rafters and trusses.

Providing and fixing suspended false ceiling which consists of metal frames works with GI bottom protected maintee and cross tee making grids of size 600 x 600 mm with support of J butterfly hooks with GI 10 SWG / 5 mm thick wire including laying of Gypsum ceiling tiles made of M/s Gypsum India limited 595 mm x 595 mm x 8 mm thick the work including two coats of top coats.

Applying water proofing coating black of ceiling tiles made of M/s Gypsum Ltd make for ceiling.

Applying Gypsum board finishing corner 4" for ceiling

Supplying, fitting, fixing and painting where necessary (one coat primer and two coats of paint) M/F Suspended Ceiling which includes G.I. perimeter channels of size 0.55mm thick (having one flange of 20mm and another flange of 30mm and a web of 27mm) along with perimeter of ceiling, screw fixed to brick wall/ partition with the help of nylon sleeves and screws, at 610mm c/c. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with two equal flanges of 15mm each) from the soffit at 1220mm c/c with ceiling angle of width 25mmx10mmx0.55mm thick fixed to soffit with G.I.cleat and steel expansion fasteners. 12.5mm thick Ceiling section of 0.55mm thickness having knurled web of 51.5mm and two equal flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clip and in direction perpendicular to the intermediate channel at 457mm c/c, 9.5mm/ 12.5mm tapered edge Gypboard (conforming to IS:2095-1982) is then screw fixed to ceiling section with 25mm long drywall screws at 230mm c/c. Screw fixing is done mechanically either with screw driver or drilling machine with suitable attachment. Finally, the boards are to be jointed and finished so as to have a flush look which includes filling and finishing the tapered and square edges of the boards with jointing compound, joint paper tape and two coats of drywall topcoat suitable for Gypboard complete at all levels as specified and directed. (For light fittings, providing opening for doors, window, ventilators etc, cut out made with frame of perimeter channel supported suitably to be measured and paid separately where necessary).

12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).

15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall.

6 mm cement plaster to ceiling 1 : 3 (1 cement : 3 fine sand).

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.

Wall painting (two or coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade.

Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.

Painting two or more coats (excluding priming coat) with superior ready mixed paint for steel work of approved brand and manufacture in all shades on new work to give an even shade.

Making plinth protection with 2nd class bricks on edge in cement mortar 1 : 6 (1 cement : 6 fine sand) over 7.50 cm bed of dry bricks aggregate 40 mm nominal size rammed consolidated and grouted with fine sand and the top of bricks pointed with cement mortar 1 : 2 (1 cement : 2 fine sand).

Providing and fixing of leak proof,fire retardant and Uv resistant skylighting galzing with Lexan polycarbonate sheet fixed with specially designed Domal management system confirming to IS:737 alloy & temper 6063 - T6 with a UTS of 180 to 200 mpa and weight of 1.03 kg/mtr. approx with EPDM rubber gasket of specific gravity as per ISO 2781,age resistant as per ASTM - D573 hardness as per 2240 & tensile strength as per ASTM 412 including the silicon sealent GE Bayer Weathersil NY as per drawing and directed by the Engineer in charge. (b) Polycarbonate Sheet (Multiwall) (iii) 10 mm thick

Supply of Bed-cum-passenger lift (20 PAX) 1350 Kgs AC,400/440 volts,3 phase,50 cycles travel distance 16 Mtrs.,0.75 mtr. Per second speed,micro processor based driver, Inside dimention 1300 X 2300 X 2200 (mm(W) X mm(D) Landing Entrance 4, Positation of machnary in machine room LED light & circular fan auto off, Car Ceiling stainless steel Car Flooring 20 mm recess sliding door,battery operated emergency light and alarm ball, call register single etc.as required. As per IS 14665 standerd,battery operated automatic rescue device(ARD) shall be provided on lift to take the lift to the nearest possible landing in case of power failure. In case of lift equipped with backup generator with AMF (automatic mains failure) panel,

Providing and supplying of LG TV 43" LED 4KTV

Under Ground Reservour - Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.

Extra for every additional lift of 1.50 m or part thereof for earth work in all soils including shingles, small size boulders upto 30 cm size but excluding saturated soil and rock.

Providing & laying cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 stone aggregate 40mm nominal size) excluding cost of centering & shuttering. a) Foundations and plinth

Plain/Reinforced cement concrete in open foundation complete as per drawing and technical specifications E) RCC Grade M25 Using concrete Mixer

Reinforcement of RCC work including bending, binding and placing in position complete. a) Cold twisted bars.

Centring and shuttering including strutting, propping etc and removal of form work for :

a) Foundation, footings, bases of columns etc. and mass concrete.

b) Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

c) Column, pillars, posts and struts etc.

d) Lintels, beams, girders, bressumers and cantilevers etc.

e) Suspended floors, roofs, landings shelves and their supports, balconies and chajjas (3.5 m height).

f) Stairs (excluding landings) except spiral stair cases.

Brick work with best available local bricks in foundations and plinth in cement mortar 1:4 (1 cement : 4 fine sand).

Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement. a) 50 mm thick

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm).

Float glass panes 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm).

12 mm cement plaster 1 : 4 (1 cement : 4 fine sand)

15 mm cement plaster 1 : 4 (1 cement : 4 fine sand) on the rough side of single or half brick wall.

6 mm cement plaster to ceiling 1 : 3 (1 cement : 3 fine sand).

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Distempering (two or more coats) with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer of approved brand and manufacture to give an even shade.

Finishing walls with water proofing cement paint of approved brand and manufacture and required shade on new work (three or more coats) to give an even shade.

Vitreous china foot rests 250x125x25 mm

SH- Approach road - Earth work in excavation in foundation and trenches in soils containing 50% or more of shingle or small size boulders upto 30 cm size, lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers when required, into plinth, sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated soil as directed within a lead of 50m.

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge

SH- PHE System - EXTERNAL DRAINAGE SYSTEM - Construction of cement concrete drain 15 cm wide and 15 cm deep, to be layed in 1: 400 slope , in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips or shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering and all exposed surfaces with 12 mm thick cement mortar 1 : 3 (1 cement : 3 coarse sand) including shuttering complete

Construction of cement concrete drain 30 cm wide and 23 cm deep in cement concrete 1 : 3 : 6 (1 cement : 3 sand : 6 hard graded stone chips/shingle 40 mm and down gauge) 8 cm thick on sides and bottom and plastering on all exposed surfaces with 12 mm thick cement mortar1 : 3 (1 cement : 3 fine sand) including shuttering complete.

Constructing brick masonry manhole & Catch Basin with 2nd class bricks in cement mortar 1 : 5 (1 cement :5 fine sand) RCC top slab with 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone single 20 mm nominal size), foundation concrete 1 : 4 : 8 mix (1 cement : 4 coarse sand : 8 stone aggregate 40 mm nominal size) inside plastering 12 mm thick with cement mortar 1 : 3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4 stone aggregate 20 mm nominal size) neatly finished complete as per standard design. a) Inside size 90 x 80 cm and 45 cm deep including CI cover with frame (light duty) 455 x 610 mm internal dimensions total weight of cover and frame to be not less than 38 Kg (weight of cover and frame to be not less than 38 kg, (weight of cover 23 Kg and weight of frame 15 Kg).

Providing laying and jointing glazed stone ware pipe grade 'A' with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete.

a) 150 mm dia SW pipes

b) 200 mm dia SW pipes

Providing and Layng light duty non-pressure NP2 Class RCC pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 Cement : 2 fine sand) including testing c) 250 mm dia R.C.C pipes joints etc complete.

Providing and laying cement concrete 1 : 5 : 10 (1 cement : 5 lime sand : 10 graded stone aggregate 40 mm nominal size) all around SW Pipe including bed concrete 15 cm thick as per standard design.

a) 150 mm dia SW pipes

b) 200 mm dia SW pipes

Sump Pump Delivery Line- Upvc SWR Type B and 80 mm dia pipe along with fittings and supports complete

Construction of Brick Masonery chamber and Oil and Grease Trap as specified in Drawing ( 600 X 600 mm)

Providing and fixing on wall face C.I. rain water pipe including filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1 : 2 ( 1 cement : 2 fine sand). a) 150 mm diameter pipe

Providing and fixing GI pipes complete with GI fittings and clamps including cutting and making good the walls (internal work) for Hot and Cold water supply system

a) 15 mm nominal bore

b) 20 mm nominal bore

c) 25 mm nominal bore

d) 32 mm nominal bore

Providing and fixing GI pipes complete with GI fittings including trenching and refilling etc (external work).

a) 20 mm nominal bore

b) 25 mm nominal bore

c) 32 mm nominal bore

e) 40 mm nominal bore

f) 50 mm nominal bore

g) 65 mm nominal bore

h) 80 mm nominal bore

Providing & fixing 9 mm thick thermal insulation elastomeric flexible material having hermetic blistered closed cell structure of expanded synthetic rubber over pipes/ fitting as per manufacturer's specifications etc.complete.

Providing and fixing PVC connection pipe with brass union. A) 45 cm length a) 15 mm nominal bore

Providing and fixing brass bib cock of approved quality. a)15 mm nominal bore

Providing and fixing brass stop cock of approved quality. a) 15 mm nominal bore

Providing and fixing Gun metal Gate valve with CI wheel of approved quality ( Screwed end)

b) 50 mm nominal bore

c) 65 mm nominal bore

Providing and fixing CP brass shower rose with 15 mm or 20 mm dia inlet. a) 100 mm dia

Providing and fixing CP brass (for shower)hot and cold mixer for shower, single lever , exposed , with necessary joints, wall flange etc comple

Providing and filling sand all round GI pipes in external work. a) 25 mm dia pipe

Providing and fixing Gun metal Gate valve with CI wheel of approved quality ( Screwed end)

a) 20 mm dia pipe

b) 25 mm dia pipe

c) 32 mm dia pipe

d) 40 mm dia pipe

e) 50 mm dia pipe

Providing and fixing Brass Automatic Air release valve screw type of approved quality complete. a) 20 mm dia pipe

Providing and fixing Butterfly Valve PN 1.0 (with SG Iron Disk & Slim seal standard lever operated type, Nitrile/EPDM rubber linning and flange ) of approved quality complete.

a) 65 mm dia pipe

b) 80 mm dia pipe

Providing and fixing non-return valve of approved quality

a) 40 mm dia pipe

b) 50 mm dia pipe

c) 65 mm dia pipe

d) 80 mm dia pipe

Providing and fixing of Y-Strainer, Flanged type, PN 1.0 with SS mesh and suitable flange of approved quality

a) 65 mm dia pipe

b) 80 mm dia pipe

Providing and Fixing of Floor mounted Drinking water dispenser of approved make and quality

Providing and Fixing of tripple layer POLYTHENE water tank of 10 KL capacity approved make and quality. With cover and locking arranngement

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing 600x450 mm bevelled edge mirror or superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with CP brass screws and washers.

Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleats with CP brass screws (heavy quality). a) 750 x 20 mm size

Providing and fixing kitchen sink including making all connection excluding cost of fittings. a) White glazed fire clay sink size 600x450x150 mm

Providing and fixing kitchen Lab Sink including making all connection excluding cost of fittings.

Providing and fixing UPVC SWR Type B ( As per IS 13592) soil, waste and vent pipes along with all necessary fittings and supports

a) 50 mm dia NB

b) 65 mm dia NB

c) 75 mm dia NB

d) 100 mm dia NB

Providing and fixing sand UPVC SWR Type B basin waste pipes as per IS 13592 along with all necessary fittings and supports 32 mm dia

Providing and fixing of P trap of following sizes with SS gratings with a minimum water seal of 50 mm , complete with inbuilt cockroach trap

a) 100 mm inlet & 75 mm outlet

b) 125 mm inlet &100 mm outlet

Providing and fixing of Clean out Plug with suitable insert key for PVC pipe with a threaded socket as necessary

a) 100 mm dia

b) 75 mm dia

Providing and fixing of rainwater collection Khurrah with leaf trap , grating made out of UPVC with flange 150 mm dia

Providing and fixing white vitreous china pedestal type (European type WC pan) water closet with seat and lid with CP brass hinges and rubber buffers, 12.5 Litres white vitreous china low-level flushing cistern with fittings and brackets 40 mm white porcelain a) WC pan with white plastic seat and lid, Flush Tank

Providing and fixing white vitreous china flat back type lipped front urinal basin of 430x260x350 mm and 340x430x265 mm sizes respectively with CI automatic flushing cistern with fittings, RS or CI brackets standard size galvanized steel flush pipe and spreaders with brass unions and GI clamps complete including painting of cistern and fittings, cutting and making good the walls and floors where required. a) One urinal basin with 5 Litres CI automatic flushing cistern

Providing and fixing of CP Brass waste for wash basin and sink ( bottle trap)-40 MM

Providing and fixing of health faucet for EWC approved make with necessary CP flex hose 1000 mm long and nozzle with supports and complete

Providing and fixing ss scrub sink 2 -Bay size manufactured from 1 mm thick SS 304 18G grade nickel steel with top quality polish , 1 no 40mm dia Cp waste coupling with flexible hose pipe connection upto floor trap , elbow operated sink mixer with swing spout table mounted type and necessary wall flange etc complete

Providing and fixing CP brass towel rail complete with CP brass brackets fixed to wooden cleats with CP brass screws (heavy quality).750 X 20 mm size

Providing and fixing toilet paper holder OF CP Brass

Providing and fixing soap dish holder CP Brass

Providing and fixing ELbow operated bob cock for kitchen, Lab Sink, Du / Sluice & Scrub including making all connection excluding cost of fittings.

AIR TO WATER HEAT PUMPS FOR GENERATING HOT WATER: Supply, Erection, Testing & Commissioning of Micro Processor Controlled Modular Air to Water Scroll Heat pump delivering actual capacity as per the following parameters duly installed at site(modules shall operate in master slave combination with automatic run time equalization between the modules. ) The Heat Pump should be complete with Single/multiple hermatic scroll compressors , Condensors, Heat Exchangers, Electronic Expansion Valve,Primary circulation pump, braze plate type (SS316) primary heat exchanger, anitvibration rubber mounts with factory assembled with Electrical panel mounted on the heat pump including the disconnect switch suitable for 50 Hz, 3 Phase, 415 volts, AC supply. The vibration isolators shall be shipped alongwith heat pump from your works. Heat Pump should be capable of generating Hot Water upto 55ºC.

Supply of MS / SS Hot water mixing tank with glass wool insulation, working processor 4 bar/ testing pressure 6 bar Moc-MS. HOTWATER MIXING TANK Cap 1500 Ltr fitted with air/ steam release valve and drain valve

Associated Electrical Pannel and accessories including cabling, MCB and RCCBs as required glands, supports, earthing, termination ete.

PUMPS AND ASSOCIATED ITEMS-WATER SUPPLY AND SEWARAGE: Procurement, supply, erection & commissioning of electrically operated clear water multistage vertical lifting pumpsets (IE3 Rating & Suitable for aluminium cabling) self priming type complete with mechanical seals,protection sensors overload/undervoltage tripping/ {oil leakage if required)/ electronic (magnetic) level sensing unit & dry run cut off. The pumps should be with C.I. housing, bronze or S.S. impeller,to be housed in Pump room with minimum one size higher port valves for discharge & suction lines. The pump discharge pipe is to be provided with glycerine filled diaphragm pressure gauge with shatterproof glass & bleed valve . All accessories viz. expansion bellow, pressure gauge, switch, pet cock & all other materials for fixing should be included in the offer. Electrical control panel should be included in the offer as separate item given below.

Head : 48 M , Flowrate : 15 GPM

Head : 45 M , Flowrate : 35 GPM

SUBMERSIBLE WASTER WATER TRANSFER PUMP: Procurement, supply, erection & commissioning of electrically operated submersible wastewater transfer pump (IE3 Rating & Suitable for aluminium cabling) complete with mechanical seals,protection sensors overload/undervoltage tripping/ {oil leakage if required)/ electronic (magnetic) level sensing unit & dry run cut off. The pumps should be with bronze or S.S. impeller,to be housed inside sumps as indicated in drawing.Minimum Partcle size upto 50 mm and head 20 M. All accessories for fixing along with delivery hose should be included in the offer. Electrical control panel should be included in the offer. Head : 20 M Flowrate : 15 Cum/Hr, Delivery pipe size 80 mm

SUBMERSIBLE BOREWELL PUMP: Borewell Multi-stage submersible pump of capacity 30 GPM, with 6" bore suction, Delivery Head 150 M , rated capacity as specified by manufacturer against given flowrate and immersion depth upto 100 m along with all necessary Housings, Casings, Panels, valves, strainers, fittings, tees, elbows and accessories. (IE3 Rating & Suitable for aluminium cabling)

TERRACE BOOSTER PUMP WITH PRESSURE VESSEL : Procurement, supply, erection & commissioning of electrically operated Inline water Pressure booster pump ( (IE3 Rating & Suitable for aluminium cabling)) suitable to be integrated with Pressure Vessel and Hydraulic Pressure drop sensor, complete with Pressure vessel ( Pressure Vessel Type: Single Diaphram type, with SS water Connection and PP liner and including complete with mechanical seals, Air Valves, level sensing unit etc. and size as per manufacturer specification). Pump shall be provided with seals,protection sensors overload/undervoltage tripping/ {oil leakage if required)/ electronic (magnetic) level sensing unit & dry run cut off. The pump discharge pipe is to be provided with glycerine filled diaphragm pressure gauge with shatterproof glass & bleed valve . Electrical control panel should be included in the offer as integrated item .

Flowrate : 65 GPM or 15 Cum/Hr , Head : 36 M , 2. 4 KW For DWS

Flowrate : 45 GPM or 10 Cum/Hr , Head : 36 M , 1.7 KW For FWS

Pressure Vessel Capacity : Minimum 50 L , Vertical Type,10 BAR

HOT WATER RECIRCULATION PUMP: Procurement, supply, erection & commissioning of electrically operated inline hot water recirculation pumpset (IE3 Rating & Suitable for aluminium cabling), self priming type complete with mechanical seals,protection sensors overload/undervoltage tripping/ {oil leakage if required)/ electronic (magnetic) level sensing unit & dry run cut off. The pumps should be with C.I. housing, bronze or S.S. impeller,to be housed in attic floor with same size port valves for discharge & suction lines. All accessories viz. expansion bellow, pressure gauge, switch, pet cock & all other materials for fixing should be included in the offer. Electrical control panel should be included in the offer as separate item given below. Head : 45 M Flowrate : 20 LPM , Port Size 25 mm

SUBMERSIBLE IRRIGATION PUMP - Multi-stage submersible pump of capacity 10 GPM, having 2 hrs duty with 32 mm delivery port , Delivery Head 50 M , rated capacity 0.40 KW against given flowrate all necessary Housings, Casings, Panels, valves, strainers, fittings, tees, elbows. Lifting Chain block and accessories. (IE3 Rating & Suitable for aluminium cabling)

30 KLD CAPACITY PACKAGED SEWAGE CUM EFFLUENT TREATMENT PLANT - Supplying, installation, testing & commissioning of 30 KLD Sewage Cum Effluent Treatment Plant for the following Specification

DOMESTIC WATER TREATMENT PLANT- Supplying, installation, testing & commissioning of Water Treatment Plant ( capable to deliver 4 cum/ hr Day water at desired quality ( less than 350 PPM) as per codesof practice ) . IRON REMOVAL FILTER -Supply Erection , testing, Commissioning of approved make Iron Removal Filter filter of FRP make with Epoxy Coated with necessary equipment complete with Frontal piping, valves, suitable supports for mounting, pressure guage, orifice plate etc..,complete as per the detailed specification for the efficient working of system. Pressure Vessel to be designed as per IS 2825 unfired preesure vessel with necessary corrossion allowance along with necessary pumps, fittings, pipes, valves, Supports and accessories

ACTIVATED CARBON FILTER - Supply Erection , testing, Commissioning of approved make ACF of FRP construction with necessary equipment complete with Frontal piping, valves, suitable supports for mounting, pressure guage, orifice plate etc..,complete . Pressure Vessel to be designed as per IS 2825 unfired preesure vessel with necessary corrossion allowance. To be supplied along with necessary pumps, fittings, pipes, valves, Supports and accessories . Filter Diameter : Min 600 mm. Height: 1800mm, . Filter media: Activated charcoal ( carbon) in Flow: 5 M3/hr and up to 30 M3/Day with 6 Hrs Operation, Min Working Pressure:3.5 Kg/cm2. Back Wash : once in a day

MULTI GRADE FILTERS - Supply Erection , testing, Commissioning of approved make ACF of FRP construction necessary equipment complete with Frontal piping, valves, suitable supports for mounting, pressure guage, orifice plate etc..,complete. Pressure Vessel to be designed as per IS 2825 unfired preesure vessel with necessary corrossion allowance. To be supplied along with necessary pumps, fittings, pipes, valves, Supports and accessories . Min Filter Diameter : 800 mm. Height: 1800mm, Shell thick ness : 6 mm, Disk thick ness- 8 mm. Filter media: Filtering sand, gravels and pebbles . Min Flow: 5 M3/hr and up to 30 M3/Day with 6 Hrs Operation

PUMPS , VALVES AND ACCESSORIES - Supplying , testing, Commissioning of All necessary Pumps, Valves and Accessories along with mechanical seals,protection sensors load/undervoltage tripping/ {oil leakage if required)/ electronic (magnetic) with dry run cut off. The pumps should be with bronze or S.S. impeller,to be housed inside designated WTP area Make : Xylem/Kirloskar / Approved Equivalent Flowrate and Head as per Manufacturer Specifications

CHLORINATOR - Supplying of chlorine dosing system consisting of one HDPE tank of 50 litres capacity with a positive displacement diaphragm dosing pump having variable flowrate. The motor shall be suitable for operation at 240 V/Single phase/50 Hz. Supply. Make : E-Dose / Approved Equivalent

FEED PUMP Supplying, installing, testing and commissioning vertical online/horizontal centrifugal pumping set with mechanical seal, C.I. Housing, C.I. volute and SS impeller & SS shaft connected to a TEFC induction motor of suitable HP for 415 volts, 3 phase, 50 cycles A.C. supply with 150 mm dia pressure gauge with gunmetal isolation cock, vibration eliminating pads, base plate wiring upto panel and equipment for water level controller to start and stop the pump automatically at predecided levels of the water in the tank with provision of protection for dry run etc. complete in all respect with provision of protection for dry run etc. complete in all respect . The shop drawing or the pumps along with its characteristics curves, model and technical data etc. are to be submitted for approval before purchase of pump). WTP Filter feed pump(1 W+ 1 SB) Head 20 M, Capacity : 120 LPM ( Kirloskar/Wilo)

Electrical Panel and accessories (Vendor to submit complete design P&ID,Plan & Section , Calculations in PDF form and output water quality to consultant for approval)

PRIMARY RO PLANT - Supply ,Testing and Commissioning of R.O. Plant capable to deliver Output water at TDS < 150 PPM and along with necessary dozing system to set the TDS value as per requirement (Output water TDS adjustable atleast upto 70 PPM) . Plant should be POWDER coated M.S. skid complete with i) Required Numbers and grade of membrane (vendor to design and get approval from consultant) ii) 2 element housing. iii) SS 316 Impeller - High Pressure Pump iv) Control Panelv) Pr. Gauge, Flow meter, TDS meter & All other Equipments The Rate Should Include Complete items inclusive of Necessary 2 KL PVC Storage Tanks, Valves, Pipings, Pumps, Strainers, Supports and her accessories . Rate to include piping cost to blend reject from secondary RO back to TWT ( Suction Tank). Backwash once a day. Vendor to consider pre filter reqirement , if any, based on water test at their own cost. Vendor to submit design details, p&ID and plan /section drawings along with membrane calculations for approval. Vendor to submit technical datasheet including membrane details.

WALL MOUNTED SECONDARY RO UNITS - Supply ,Testing and Commissioning of upto 100 LPH Walls mounted portable R.O. Unit capable to deliver Output water at TDS < 5 PPM and along with necessary pipings and connection to equipment wash bay and CSSD as required.

SH: RCC Sewage Drain (External Work) - Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring an shuttering in: a) Foundations and plinth

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. a) RCC Grade M25

Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and technical specifications.

12 mm cement plaster 1 : 4 (1 cement : 4 fine sand).

Centring and shuttering including strutting, propping etc and removal of form work for : b )Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

SH: CC Drain (External Work) - Earth work in excavation in foundation and trenches etc. in all kinds of soil (excluding soil containing 50% or more of shingle or small size boulders upto 30 cm size, saturated soil and rock), lift upto 1.50 m and stacking the excavated soil not more than 3 m clear from the edge of the excavation and returning the stacked soil in 15 cm layers, when required, into plinth sides of foundation etc consolidating each deposited layer by ramming and watering and then disposing of all surplus soil as directed within a lead of 50m.

Providing and laying cement concrete 1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) excluding the cost of centring an shuttering in: a) Foundations and plinth

12 mm cement plaster 1 : 4(1 cement : 4 fine sand).

Centring and shuttering including strutting, propping etc and removal of form work for : b )Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.