Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹40.4 LAccepted-AOC BASTI GOVINDPURA SIMBAL MORH MAKHANPUR GOJRAN JAMMU J K 181101 | JAMMU | JAMMU AND KASHMIR | 181101 | L1 | Accepted-AOC L1 | |
| 2 | L2₹40.5 L+₹12,890.70 (0.32%)Rejected-Finance | L2 | Rejected-Finance Other Than L1 | |
| 3 | L3₹40.9 L+₹57,865 (1.43%)Rejected-Finance H NO 39 3 CHANNI HIMMAT JAMMU 180015 J K | JAMMU | JAMMU AND KASHMIR | 180015 | L3 | Rejected-Finance Other Than L1 | |
| 4 | L4₹41.0 L+₹58,195 (1.44%)Rejected-Finance | L4 | Rejected-Finance Other Than L1 | |
| 5 | L5₹41.8 L+₹1.5 L (3.65%)Rejected-Finance | L5 | Rejected-Finance Other Than L1 |
Tender Value
₹37.8 L
EMD Value
₹75,600
Closing Date
17 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE SATWARI
GE SATWARI PIN 180003
ADDN/ALTN TO SECURITY INFRA AT MEMORIAL GATE OF SATWARI GRN AT MIL STN JAMMU
2024_MES_636422_4
GEJM-81/2023-24
Open Tender
Civil Works
Item Rate
270 days
GE SATWARI
Class D Cat a(i)
9 documents required · 9 mandatory
₹500
Yes
GE Satwari
₹75,600
Yes
10 Sept 2024
1 Apr 2024
19 Apr 2024
2 Apr 2024
17 Apr 2024
5 Apr 2024
2 Apr 2024 - 5 Apr 2024
Amount
Surface excavation in any type soil n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out and Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified.
Removing excavated material exc. 250m & e exc 500m and depositing where directed at a level n exc. 1.5 m above the starting point cpmplete all as specified.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified.
M&L Cement concrete Type D2, 1:4:8 ( 40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified.
M&L Reinforced cement concrete (design mix) M25 ( 20 mm graded aggregate) in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed by Engr-in-charge.
Material and labour RCC (Design Mix) M-25, (20mm graded crushed stone aggregates) in beams, cantilevers, bressummers, lintel over 1.5m span complete all as specified and as directed by Engineer-in-Charge.
Material and labour RCC (Design Mix) M-25 (20mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts etc complete all as specified and directed by Engineer-in-Charge.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter for rough finished surfaces complete all as specified and as directed by Engineer-in-Charge.
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including sub-ports, over hangs beams etc with fair finished surface of concrete complete all as specified and as directed by Engineer-in-Charge.
Use and waste of formwork to sides of pillars, posts, struts, pier, column stanchions square, rectangular or polygonal rough finished surface of concrete complete all as specified and as directed by Engineer-in-Charge.
M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.
Ditto as above item no- 12 but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders
M&L Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, gusset plates, or flat sections) including distance pieces, cleats etcFe 410 -W (GdeE- 250) qualityA complete all as specified.
M&L Rolled/Square/round pipe sections as in main and cross beams, vertical post, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe 410 -W (Gde- E- 250) quality-A complete all as specified.
M&L Plates (plain ) channels, square cut or notched, gusset plates, base plate (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde- E- 250) quality-A complete all as specified.
S&F Mild steel bolts. (exc 20 mm and n exc 25 mm) purpose made. with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. Exc 30cm long complete all as specified.
S&F Mild steel screw bolts dia 16 mm to 20 mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long Complete all as specified.
M&L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
M&L Mild steel, plain, black sheet in wall cladding,(Thickness of sheet in 1.25mm) steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required
Pre- painted galvalume aluminum zinc coating ( AZ-150) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in curved roof covering/cladding to wall, fixed with self tapping screws as specified ® complete all as specified.
Pre-painted galvalume aluminum zinc coating (AZ-150) GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified ® complete all as specified.
M&L 20mm thick Granite (of any type) tiles machine cut, in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 10 mm thick rendering CM 1:4 complete complete all as specified.
Excavating over areas, hard/dense soil n exc 1.5 m deep and getting out complete all as specified.
M&L Cement concrete 100 mm thick, type D- 2, 1:4:8 (40mm graded aggregate) laying as floor complete all as specified.
M&L Cement concrete 100 mm thick, type B- 2, 1:2:4 (20mm graded aggregate) laying as floor complete all as specified.
M&L Preparation of new/untreated steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified.
Demolition of reinforced cement concrete of any discription ground floors and removing unserviceable material exc 100 mtr as specified.
Demolition of brick work or stone boulder masonry built in cement mortar including all quoins, arches pillars etc but excluding ashlars facings dressed stone work and precast concrete articles, complete all as specified and as directed by Engineer-in-Charge.
M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed by Engineer-in-charge.
Brick work with subclass 'B' bricks, old size bricks, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 but except bricks complete all as specified and as directed by Engineer-in-charge.
M&L Providing, cement concrete typeB1 1:2:4 ( 20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.
M&L for rendering 15 mm thick in CM 1:4 on fair face of brick work/ stone wall surfaces finished even and smooth without using extra cement all as specified. ( incl all necessary scaffolding, lifting arrangement for three story building on external surfaces).
M & L for preparation of new plastered/concrete surfaces of walls, (up to 4th sorey with necessary scaffolding) and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.
M&L 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand.
M & L at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.
M&L for 75 mm thick plain cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in sub base to floors complete, all as specified and as directed by Engr-in-Charge
Material and labour for Cement concrete tiles 30cm x 30cm and 25mm thick, machine pressed; set jointed and pointed in neat cement slurry with grey cement and in floors, and cut and polished , over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 for laying floor finishes, complete all as specified and as directed by Engr-in-Charge.
Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and as directed by Engr-in-Charge.
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in foundation filling and mas concrete complete all as specified and as directed.
Supply only chain link MS galavnised fencing, of mesh size 100mm x 100mm of 4 mm dia, complete all as specified and as directed.
Fixing only chain link fencing incuding lines wires, any mesh, size and type to any type of standards rails, straining bolts etc including provision of binding wire, complete all as specified and as directed.
S&F Galavanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails staining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured).
S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165
Supply and fixing MS Round bars 10 mm dia, fix in chain link fencing using 0.90 mm dia GI wire as strengthing bar complete all as specified. Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165)
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.
M&L glazed ceramic coloured tiles in vertical surface 300x450x7 mm thick, set and jointed in neat cement slurry and pointed white or colored cement to match the surface over and including 10 mm thick CM 1:4 all as specified.
Material and labour Non - skid Digital Ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in CM 1:4. Make : Somany,Kajaria, Sunhearrt ( sample as approved & kept in GE's sample room)
Material & labour 4mm thick PVDF aluminium composite panels consisting of a polyethylene core sand witched between two 0.4mm thick aluminium skins and coated with polyster resin of PVDF, coating, confirming to ISO-9001:2008 of any color or shade as directed by Engr-in-charge, In cladding to external wall or ceiling fixed to aluminium frame work with scews and joints to be sealed with silicon, providing and fixing scaffolding using steel supports, strut , wedges, braces, bolts, steel jalis, wooden plank etc exc. 4m & not exc. 8m height complete all as specified and as directed by Engr-in-charge. (Aluminium framework shall be measured and paid for separately).
Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows,ventilators, frame work and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottomand sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically whereverrequired including cleat angle, Aluminium snap beading for glazing/ paneling, C.P.brass/ stainless steel screws, all complete asper architectural drawings and the directionsof Engineer-in-Charge.
Material and labour Non - skid Digital Ceramic joint less Parking coloured tiles 10 to 12 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match and set in neat cement slurry and pointed with coloured/white cement to match the surface over and including 15 mm thick screed bed in CM 1:4. Make : Somany,Kajaria, Sunhearrt ( sample as approved & kept in GE's sample room)
Dismantling structural steel work including doors,gates but excluding framed truss etc
Supply and fixing LED Flood light 70 Watt 230 Volt AC Outer type with thermal management in multiple optics and equipped with IP 66 protection with impact and corrosion resistant complete with fixing arrengenment including clamps any type and size, nuts, bolts, washerand fixing on chanels, floor , poles etc and with driver and lamps all as directed
Supply and fixing LED Flood light 200 Watt 230 Volt AC Outer type with thermal management in multiple optics and equipped with IP 66 protection with impact and corrosion resistant complete with fixing arrengenment including clamps any type and size, nuts, bolts, washerand fixing on chanels, floor , poles etc and with driver and lamps all as directed
Supply and fixing LED post top latern Type 20 Watts 230 Volts Acouter type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistanct complete with drivenand lamp complete and fixing by clamp , anchor fasner and nuts, bolts with including grouting 40 mm dia pipe in wall, piler and as per site requirenment complete all as directed.
Supply and fixing LED light fitting 1 x 18Watt, 220V, AC decorative box type with driver, holder including LED Tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all fixing arrengenment all as directed by Engr in chage. Note:- The LED batten and LED tube rod shall be of same make.
Supply and fixing multi core round PVC insulated copper conductor (flexible) industrial cables PVC sheathed cables, 1100 volts conforming to IS : 694 of size 10 Sqmm, 3 core copper wire multi stranded round shape wir from junction box to light fitting inside/outside complete all as specified.
Supply and Fixing thermoplastics polystyrene/polycarbonate enclosure, shock proof, IP65( weather proof), rust proof, dust proof, water proof, internally embedded gasket with provision for all side cable entry through glands(IP-65) and/or grommets(IP-55). Size of enclosure: ( 250 x 180 x 110 ) mm With suitable connecters for /1Ph loop in loop out and branch out vibration proof connections and fixing on PCC/ steel poles with 25x3mm thick 02 Nos of clamp with nuts and bolts and washers and proper thimbling.
Supply & Fixing 25 mm dia rigid non-metallic PVC conduit medium grade ISI marked in wall/ceiling/roof /trusses / angle of boxes (junction/ terminal), tees, bends, elbows, reducers, bell mouth, tube ends and fixing by clamps with accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and as directed
Supply, installation, testing, commissioning of high mast complete motorized alongwith wiring from MCB to flood light fittings, foundation, excavation, return filling, RCC/PCC including form work, foundation bolts, nuts, washers, anchor plate and template etc as per following specifications :- (a) General specifications (i) Height of mast - 16 mtrs, (ii) Material of construction : BS EN 10025/IS 2062, (iii) Thickness of material - Top section 3mm, bottom section 4mm, (iv) Cross section of mast (number of sides)-20 sided polygon, (v) Length of individual section - Top sec : 8.35 mtrs, Bottom sec : 8.35mtrs, (vi) Diameter - Base dia : 460mm, top dia : 150mm, (vii) Types of joints - stress slip fit joints. (viii) Length of overlap-1.5 times the dia of intersection, (ix) Metal protection treatment - Hot dip galvanised as per IS 4759/IS 2629, (x) Thickness of galvanisation - average 70 microns, (xi) Size of door opening at base of mast - 1200mmx 300mm, (xii) Types of locking on door panel - Close fitting door with allen key locking with suitable reinforcement to avoid buckling at base of mast. (xiii) Lightening protection finial - GI single spike of length 1200mm, (xiv) Size of base plate - Dia : 670mm, Thickness : 30mm, (b) Dynamic loading as prevailing at site (i) Max wind speed : 180 Km/hr, (ii) Number of foundation bolts - 08 Nos, (iii) PCD of foundation bolts - 590mm,(iv) Dia of foundation bolts - M30, (v) Length of foundation bolts - 850mm (c) Lantern Carriage (i) Material of construction - 40 NB /ERW CLASS B-MS PIPE, (ii) Dia of lantern carriage ring-800mm (ID), (iii) Construction - 8 arms welded, (iv) Number of joints - 2 segments, (v) Load carrying capacity - 16 luminaries, symmerical (d) Winch : (i) Number of drums per winch- double drum, (ii) Gear Ratio - 50:1, (iii) Capacity - SWL750 Kgs, (iv) Method of operation - Motor or manual, (v) Lubrication arrangements - Self Lubricating in permanent oil bath, (vi) Type of lubricant - SAE 90/140
(e) Stainless steel wire rope (i) Grade - AISI 316, (ii) Dia of SS rope - 6mm, (iii) Construction of SS Rope - 7/19, (iv) Number of SS Ropes - 03 Nos of 6mm for lantern carriage, 02 Nos of 6mm for double drum winch, (v) Thimbles and terminals - Provided, (vi) Breaking load capacity - 2350 Kgs per SS wire rope. (f) Trailing cable (i) Type - Flexible copper 5 core 2.5 sqmm FRLSH 02 Nos, (ii) Material - EPR insulated PCP sheathed/PVC, (iii) Make - IS approved, (iv) No of circuits per mast - Two (g) Power tool (i) Model - Integral, (ii) Capacity (HP) - 1.5 HP, (iii) Number of speed - Single speed, (iv) Reversible / non reversible - Reversible, (v) Input supply - 415 Volts/240 Volts, (vi) Torque limitor - Withmechanical trippping facility. (h) Aviation light :-LED aviation light 6W luminaries integral LED light comprising of polycarbonate enclosure alongwith suitable fixing arrangements with rolled steel equal angle of 25 x 25 mm for making structure suitable for aviation obstruction light including welding, bending cold/hot drilled holes for nuts, bolts and washers of any shape or size as required base all as speficied and directed by Engr-in-Charge. Make-Bajaj /Jaquar/Wipro Note :- Cost of Excavation, return filling, PCC/RCC inclduing form work, foundation bolts, nuts, washers, anchor plate, and template, foundation drawing to be submetted by contractor as per manufacturer and as per wind speed of air drawing to be submitted complete all as specified and directed and no extra cost will be deemed to be included in the item rate and no extra will be paid to the contractor.
Supply, laying for underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, Armoured cable 16 sq mm 2 core cable confirming to IS-7098 Part-I (1988) with latest ammendments of sizes:-
Supply, laying for underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, Armoured cable 6 sq mm 2 core cable confirming to IS-7098 Part-I (1988) with latest ammendments of sizes:-
Supply, laying for underground LT cable 1100 Volts grade heavy duty electric cable XLPE insulated & PVC outer sheathing with aluminium stranded conductor, Armoured cable 16 sq mm 4 core cable confirming to IS-7098 Part-I (1988) with latest ammendments of sizes.
Supply & laying dry river sand as cable cushioning 15cm thick layer before laying and 8cm thick over cable after laying the cable in trench complete all as specifieds and directed.
Supply & laying dry bricks over cable as mechanical protection layed flat with width equal to length of brick with sub class 'B' bricks complete all as specifieds and directed.
M &L for cutting of bituminous road / floor for laying of pipe / cables not exceeding 1.5 meter wide and not exceeding 1.5 meter deep including refilling / with material and , watering well ramming / compacting and making good with PCC 1;2;4,type B-1, 100 mm thick complete all as specified and directed by Engr-in-Charge.
Material and labour for GI pipe ''light grade'' for road crossing / on wall / on pole with fixed clamps, nuts, bolts for cable protection of size 40 mm dia complete all as specifieds and directed.
Material and labour For Earthing complete with galvanized steel earth plate electrode 60cm x60cmX6 mm thick buried directly in ground to a depth not less than 3 mtr below normal ground level with top edge of earth plate at a depth not less than 2.25 mtr below ground level, earth plate surrounded by 15 cm thick packed layer of charcoal, magnicium sulphate, common salt and connected with in and including GI strip of size 32x6mm by means of stainless steel bolts, nuts, check nuts and washers connected to Transformers / panels. 40mm bore of GI pipe (light grade) from earth plate up to testing point for protection of GI strip and 20 mm bore GI pipe (medium grade) with wire mesh and funnel for watering including necessary excavation and earth work, (in any type of soil) PCC chamber (1:3:6) type C-2 with RCC cover with suitable size of handle made out of 8mm dia MS bars and angle iron 40 x 40x 3mm frame for cover complete all as shown in electrical plate No 3 of MES schedule Part I of SSR Part-I 2009 complete all as specified. RCC cover shall be painted with red paint over a primer coat and the rate include in the unit rate of item complete all as specifieds and directed.
Dismantling and taking out existing PCC poles of any type/size to deposited MES store yard all as directed byEngr-in- charge.
M/S MANJIT SINGH AND SONS
M/S ANIL MAHAJAN
M/S PARAMJEET SINGH
M/s Hansi Builders and Consultants
M/S Raman Construction Co.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .