MAINTENANCE AND REPAIR TO JOINERY WALL CEILING PLASTER TILING CHAJJAS ETC INCLUDING INTERNAL WATER SUPPLY LINES SOIL WASTE VENT PIPES ETC AT NAVAL OFFICERS MESS VARUNA COMPLEX AND PALAM BAGH IN THE AOR OF AGE BR NAVY UNDER GE NEW DELHI

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Brickwork with old size sub-class `B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brickwork with old size sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water, etc. complete all as specified and directed.

M&L 10mm thick ready mix plaster on brickwork or concrete surfaces of ceiling finished even & smooth. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge.

M&L 15mm thick ready mix plaster on brickwork or concrete surfaces of wall (internal and external surfaces) in two layers (thickness of each layer not more than 10 mm) finished even & smooth. The first layer shall be prepared as per manufacturer instructions, relevant IS code and Engineering practices. The complete work of this item shall be executed only by a skilled labour of the trade complete all as specified and directed by Engr-in-Charge.

M&L for Polymer modified cementious bonding coat, prepared and applied on the concrete/ masonry surfaces with 1 part of Styrene Butadiene Rubber latex emulsion (SBR latex) with 4 parts of water and 6 parts of cement by weight. Coverage of SBR latex - 0.25Ltr / sqm for one coat complete all as specified and directed.

M&L for preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper on walls over a coat of primer and over and including 2 mm thick wall care putty complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion paint over one coat of primer and over and including one coat of 2 mm thick wall care putty complete all as specified and directed.

M&L for Racking out of hair line cracked joints and repair/filling with crack filler silicon on walls complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for vitrified ceramic dark coloured tiles10 mm thick (square /rectangular) area of each tiles not exceeding 0.36 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over and including 15 mm thick Screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

M&L for vitrified ceramic light coloured tiles10 mm thick (square /rectangular) area of each tiles not exceeding 0.09 sqm, in skirtings or vertical surfaces etc. set and jointed in neat cement slurry and pointed with white or coloured cement laid over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

M&L for glazed ceramic coloured digital tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over and including 10 mm thick rendering or bedding layer of cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar.

M&L for Granite (of any type) 20mm thick machine cut, bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, moulding and polishing complete all as specified and directed.

M&L for 20 mm thick granite (of any type) machine cut as in vertical surfaces and like, jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding, moulding and polishing laid over and including 15 mm thick rendering in CM 1:4 complete all as specified.

M&L for Machine cut kota stone slab flooring 20-25mm thick, bedded with and including 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine pressed precast concrete interlocking pavers block, any shape and size, conforming to IS-15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment laid over 40mm thick sand cushioning complete all as specified and directed. (Note : Sand shall be measured and paid separately)

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for cement concrete 75 mm thick in PCC 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in sub base of floors finished fair and even complete all as specified and directed.

M&L for 50 mm thick 1:3:6 type C-2 using 20 mm graded stone aggregates as in plinth protection laid in panels surfaces finished even & fair without using extra cement complete all as specified and directed.

Supplying and laying in repairs 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified and directed.

Supplying and laying in repairs 25 mm dia CPVC pipes SDR 11 and fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified.

S&F in repairs 20 mm dia Brass Elbow complete all as specified and directed.

S&F in repairs 20 mm dia Brass Elbow (3/4 x 1/2) complete all as specified and directed.

S&F in repairs Union 20 mm complete all as specified and directed.

S&F in repairs 20 mm dia Brass Tee complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and directed.

S&F 15mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed.

S&F 20mm bore of medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed.

S&F in repairs corner glass shelf of size 300x300 mm made of transparent toughened glass 5 mm thick and chromium plated double railing on front side and chromium plated knobs on both sides fixed in position complete all as specified and directed.

Taking down Aluminium shutters of any description exc. 1 sqm but not exceeding 2 sqm each and refixing the same in the same opening after tightening and replacing of unserviceable screws, cleat, rubber packing, aluminium beading, butt hinges, etc. complete all as specified and directed. (Note: Rubber beading, snap beading, etc. measured and paid separately)

Taking down Aluminium shutters of any description not exc. 1 sqm each and refixing the same in the same opening after tightening and replacing of unserviceable screws, cleat, rubber packing, aluminium beading, butt hinges, etc. complete all as specified and directed. (Note: Rubber beading, snap beading, etc. measured and paid separately)

Hacking out old broken glass any thickness, size quality or description from steel or wooden frame fixed, glazed with putty or fixed with beads and S&F 3 mm thick frosted glass in squares not exc 0.5 sqm in each pane, fixed with oil putty or beads complete all as specified and directed.

Hacking out old broken glass any thickness, size quality or description from steel or wooden frame fixed, glazed with putty or fixed with beads and S&F 4 mm thick plain sheet glass in square not exc 0.5 sqm in each pane, fixed with putty or beads complete all as directed.

S&F in repairs stainless steel wire cloth 0.56 mm nominal dia of wire and an average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple, etc. complete all as specified and directed.

Supply only anodized aluminium snap beading suitable for door/ window shutters complete all as specified and directed.

Supply only rubber packing suitable for glazing of aluminium door and window shutters complete all as specified and directed.

Securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured)

Securing glass of any description in existing metal frames glazed with putty/ beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured)

M&L for running welding in repairs exc 2.5 cm length but n.exc 5 cm (thickness of metal to be welded n.exc 6 mm) complete all as directed.

M&L complete removal of existing treatment from old surfaces of wall and applying two coats of Plastic emulsion paint over a coat of primer and over and incl 2 mm thick wall care putty with roller finish on walls complete all as specified and directed.

M&L for one coat of synthetic enamel paint in any approved pattern and colour including preparation of old painted surfaces of concrete/plaster surfaces exceeding 10cm width or girth not otherwise provided complete all as specified and directed.

Taking down old false ceiling of any description including frame work in any condition all as specified an directed.

M&L for 12 mm thick Gypsum board false ceiling fixed with counter sunk screws on and including Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre /intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre., including two coats of plastic emulsion paint (approved colour) over a coat of primer on exposed surfaces of ceiling boards including taking down old false ceiling complete all as specified and directed.

S&F in repairs mineral fibre ceiling boards 16mm thick 600 x 600 mm size including grid 25x25x1.6mm thick GI powder coated angles 25 x35x1.6mm size ‘T’ section fixed with suspenders from ceiling etc including removal of existing complete all as specified and as directed.

S&F pre-laminated PVC rigid foam sheet wall panelling of 5mm thick stuck on inner frame work of 35 mm wide strips of 5mm thick rigid foam sheet . The strips should have a groove of 6 mm width and 2 mm depth for sinking the head of screw used to fix the strip to the wall and should be placed vertically at head equal intervals of 600 mm C/C. The PVC Strip to be fixed with 65 mm long MS Screw though the groove in the strip by using PVC fastener complete all as specified and as directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) exc 1.5 sq m but n.exc 4sqm each complete all as specified and as directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and as directed.

S&F Solid panel PVC internal door frame (prelam) of size 50mm x 47mm made out of 5mm one side prelam colour PVC sheet reinforced with M.S. tube, supplying & fixing in opening as per specification & drawing .The door frame shall be fixed to the wall using 65/100mm long SS Screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member & minimum 2 Nos complete all as specified and directed.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2 mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing .

S&F 35mm thick 2nd class HW rail and style, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified.

S&F 35 mm thick II class hard wood (door) plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on the both faces. The size of rail as per IS: 1003 (Pt I) kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, supplied and fitted to chowkhats complete all as specified.

M&L Fe-410-W(Gde-E-250) quality-B for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed..

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each and refixing after easing & adjusting in same opening complete all as specified and as directed.

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as directed

S&F in repairs MS sliding door 250 mm long bolt type stove enamelled black with bright bolt not less than 12 mm dia with and incl a minimum of 6 bolts and nuts, four on bolt plate and two on staple and fixed complete all as directed.

S&F in repairs butt hinges 100mm medium weight, cold rolled, mild steel fixed with welding or screws on position complete all as directed

S&F in repairs aluminium handles cast type anodised 150mm complete all as directed

S&F in repairs 200mm aluminium anodised barrel tower bolts of extruded section complete all as directed

S&F in repairs drapery rod 25 mm dia stainless steel of grade 304 with side caps etc fixed in position with stainless steel brackets complete all as specified.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

S&F Stainless steel butt hinges100mm fixed with SS screws complete all as directed

S&F aluminium handles cast type anodised 150mm complete all as directed

S&F 200mm aluminium anodised barrel tower bolts of extruded section complete all as directed

S&F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed.

M&L preparation of new wood or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L preparation of new steel and iron surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F in repairs glazed aluminium powder coated two track sliding window (area of each window not exceeding 1.50 sqm ) with 18mmm thick shutters extruded aluminium section as mentioned below and glazed with 4 mm thick glass fixed with rubber beading/gasket and aluminiun powder coated beading all around and lock type handle of size 75mm etc complete all as specified and directed:- (a)Outer frame with rectangular tube 63.50X38.1X1.7mm thick , window Chowkhat bottom section with size -61.85X31.75X1.05mm thick, top and sides with section size-61.85X31.75X1mm thick (b) Shutter top and bottom rail - size 50 x18.80 x 1.50 mm thick , shutter inter lock with section size-40X18/28 X1.60mm thick and Shutter handle section - size 40X18 X1.70mm thick.

Supply and Fixed Aluminium powder coated decorative grill with 6.3mm thick aluminum section and 100X100mm openings , weighing not less than 1.75Kg/Sqm and anodized aluminium 'U' shape channel frame work all around the grill and fixed with steel screws complete all as specified and directed.

S&F in repairs aluminium powder coated door using aluminum sections, Door chowkhat with section size- 101.6mm x44.45mm x 2.00mm and Door shutter : vertical style with sections size- ( 85mmx44.45mm x 2.70 mm thick), top rail section size- 85X44.45X2.0 thick), lock rail section size- 100X44.50X2.0thick and bottom rail section size 101.60 x 44.50x2.50 thick incl 5 mm thick glass on top panel and Partly/fully fixed with 12mm thick prelaminated particle board fixed with aluminium snap beading and rubber gasket, each shutter will be fitted with 01 No tower bolt 200mm, 02 Nos handle D type 200 mm long and one hydraulic floor spring & mortice lock complete all as specified and as directed.

S&F in repair Aluminium Powder coated ventilator made of aluminium section weighing 0.55 kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, 5 mm frosted glass aluminium snap beading screws, (top portion will be openable shutter with stainless steel wire mess and bottom portion shall be fixed glass) complete all as specified and as directed.

S&F in repairs glazed and gauzed three track aluminium powder coated sliding window as mentioned below and glazed with 5 mm thick glass fixed with rubber beading/gasket and GI fly proofing and aluminium powder coated beading all around and lock type handle of size 75mm etc complete all as specified and directed:- (a) outer Frame with rectangular section -14035, frame bottom with section 20957 and frame top and sides with section-20958 (b) Shutter : top and side with section-20606 , interlocking with section-20605 and bottom with section-20604

S&F locking arrangement for glass door to wall for glass doors of thickness 8mm to 12mm with stainless steel locking arrangement to lock the door from both sides including necessary cutting if required in toughened glass complete all as specified and as directed.

S&F stainless steel door handle 450 mm long (hole to hole) for toughened glass door including necessary holes in glass complete all as specified and as directed.

M&L for Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed in repairs.

S&F in repair D type handle Stainless steel (SS 304) size 25mm x 325 mm for glass door shutter complete all as specified and as directed.

S&F in repair 5 mm thick window/ door glass in panels of aluminum window/doors of panel size not exceeding 1 sqm each any shape and size including heat absorbing film and rubber beading as per site requirement complete all as specified and as directed.

M&L for taking down of existing 8 mm to 12 mm thick toughened glass door (shutter ) with hydraulic floor spring and top pivot and re-fixing the same with set of new SS hydraulic floor spring & top pivot sufficient to operate for the glass doors with weight of 120-150 Kg Complete all as specified and directed

S&F in repairs cast iron oval access door fixed with rubber gasket and suitable nuts for 100/75 mm bore cast iron pipes fitting as branch pieces/ door bends etc fixed in position complete upto four storey building block including necessary steel scaffolding complete all as specified and directed.(ISI marked)

Excavation in trenches in soft/ loose soil not exceeding 1.5 m wide n.exc 1.5m depth for foundation etc for shaft, wells, cesspits, manholes, pier holes etc. n.exc 10sqm on plan and n.exc 1.5m depth and getting out in soft loose soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft or loose soil complete all as specified and as directed.

Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar including cement concrete bedding and haunching for 150 bore pipe complete all as specified and as directed.

All as per item no. 90.00 here-in-before but 200mm bore pipe.

S&F Salt glazed stone ware drain pipes, grade A, laid in trenches and jointed as specified 150mm internal dia of pipe complete all as specified.

S&F Salt glazed stone ware drain pipes, grade A, laid in trenches and jointed as specified 200mm internal dia of pipe complete all as specified.

M&L for Concrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 150mm bore of pipe complete all as specified and directed.

M&L for Concrete bed to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested in cement concrete1:3:6 type C-2 for 200 mm bore of pipe complete all as specified and directed.

M&L for cleaning and de-silting of sewage lines upto and including 300mm internal diameter of any depth upto three meter depth. The cleaning shall be carried out with super succer machine. The sludge deposited in the sewage line shall be fully cleaned and disposed off the same outside the MoD land at any distance and without any additional cost on the same day when it was taken out. The job shall be carried out with safety precaution equipments and with strict supervision complete all as specified and as directed.

Cleaning of manholes by removing the sludge from manhole (by pump or motor) any depth n. exc. 3.00 m and dispose off the sludge outside defence land complete all as specified and as directed.

Cleaning to blockage of floor traps, WC and Wash hand basin complete all as specified and as directed.

Dismantling water tanks and removing away from site capacity of tank 500 litres complete all as specified and as directed.

All as per item no. 99.00 here-in-before but capacity of tank 1000 litres

S&F Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position, 500 litres capacity complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position, 1000 litres capacity complete all as specified and directed.

Cleaning and removing all silt and dirt etc from tanks and form mouths of circulating pipes, etc. for 1000 Ltrs capacity of tanks complete all as specified and as directed.

Cleaning and removing all silt and dirt etc from tanks and from mouths of circulating pipes, etc. for 500 Ltrs capacity of tanks complete all as specified and as directed.

S&F in repairs water tank cover for water tank of capacity 500ltr fixed with brackets and screws complete all as specified and as directed.

S&F in repairs water tank cover for water tank of capacity 1000 ltr fixed with brackets and screws complete all as specified and as directed.

S&F in repairs ball valve of PTMT with aluminium rod and high density plastic ball for 20 mm dia iron pipe complete all as directed. (Minimum weight 20mm-210gms)

S&F in repairs ball valve of PTMT with aluminium rod and high density plastic ball for 15 mm dia iron pipe complete all as directed. (Minimum weight 15mm-142gms)

S&F in repairs china water closet Orissa Pan 580 X440mm long pan, Ist quality, ISI marked, with integral foot rests, cast iron 'S' trap including provn of cement concrete bedding including connections and fixing flushing cistern/pipe and making good disturbed portion to match existing surfaces complete all as specified and directed.

S&F in repairs vitreous china white wash hand basin flat back of size 550x400mm, ISI marked, Ist quality, including CI/MS brackets including cutting for and pinning in brackets complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white, including fixing of bolts to floor and fixing of seat cover, flushing cistern, flush pipe and PVC connection pipe etc complete all as specified and directed.

S&F in repairs brass chromium plated health faucet for water closet including PVC connecting pipe 1.0 m long with check nut and washers complete all as specified and as directed.

Supply and fix in repair plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised device complete all as specified and as directed.

S&F in repairs factory made manholes covers with MS flat all around the cover and including re-inforcement with cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) of any thickness and size laid with cement mortar 1:6 in position complete all as specified and directed.

S&F in repairs 15 mm dia brass chromium plated pillar tap fancy type, with capstan head screwed for 15 mm bore of pipe complete all as directed

S&F in repair 15mm bore brass CP mixer fancy type, three way type, for mixing hot and cold water screwed down for 15mm bore iron pipes complete all as specified and as directed.

S&F in repairs PVC connection 15 mm bore 450 mm long with 2 Nos PTMT nuts with washer complete all as specified and as directed.

S&F in repair brass chromium plated shower rose 125mm size with or without swivel joints including fixing to steel pipe complete all as directed

S&F in repairs 32 mm bore PVC waste pipe for WHB complete all as specified and as directed.

S&F in repairs 40 mm bore PVC waste pipe for urinals/sink complete all as specified and as directed.

S&F in repairs waste fittings brass chromium plated 32 mm dia for wash hand basin with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repairs waste fittings brass chromium plated 40 mm bore for stainless steel sink/urinals with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, incl PVC waste pipe and CP waste fitting overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and as directed.

S&F in repairs Stainless steel plate rack made of stainless steel 1mm thick 900mmx 600mmx300mm complete all as specified and as directed.

S&F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee, union etc for 15 mm bore pipe (ISI marked) complete all as specified and as directed. (Note:- Refixing of old GI tubing upto 1.5 m included in rates)

S&F in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee, union etc for 20 mm bore pipe (ISI marked) complete all as specified and as directed. (Note:- Refixing of old GI tubing upto 1.5 m included in rates)

S&F in repairs PVC valveless, syphonic action type, flushing cistern of capacity 10 litres, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repairs PVC handle for low level flushing cistern complete all as specified and as directed.

Petty repair/adjustment to washer, Syphon, Syphon washer etc, for high or low level flushing cistern and making functional complete all as specified and as directed.

S&F in repairs CP grating 100 mm dia round fixed on floor/Nahani trap fixed with white cement including necessary cutting etc complete all as specified and as directed.

S&F in repairs Wash Hand Basin of size 550mmX425mm counter top white including 32mm bore dia CP waste coupling, complete all as specified and as directed.

Taking down rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. complete all as specified and as directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls as in rain water pipes of four storied buildings complete all as specified and as directed.

S&F PVC (SWR) bends 110mm bore any radius for rain water pipes of four storied buildings complete all as specified and as directed.

M&L for 20mm dia CP finish brass alloy towel rail, 600mm long fixed in repairs complete all as specified and as directed.

S&F in repairs chromium plated cast copper alloy angle valve fancy type with capastan head screwed down ends for high pressure for 15 mm bore iron pipe complete all as specified and as directed.

S&F in repairs 15 mm dia brass chromium plated Bib tap fancy type with capstan head screwed down for iron pipe complete all as specified and as directed.

S&F in repair 15mm bore dia Stainless Steel finish 2 way Bib Cock quarter turn including cover plate complete all as specified and as directed.

S&F in repairs 15 mm dia cast copper alloy stop valve screwed down for high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

S&F in repairs 20mm bore gun metal globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and as directed.

S&F in repairs 25mm bore gun metal globe or gate valve with iron wheel, screwed both ends for iron pipes complete all as specified and as directed.

S&F 150mm PTMT Bath asset Grating square hole/without hole fixed in position over Rain Water Pipe/nahani trap with cement slurry complete all as specified and as directed.

S&F in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe complete all as specified and as directed. (Minimum weight 15mm-90gms)

S&F in repair 15mm bore Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as directed. (Minimum weight 15mm-90gms)

M&L for Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment along external walls where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed.

M&L Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron, complete all as specified and directed.

M&L for Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors, complete all as specified and directed.

M&L for Non-skid jointless coloured ceramic tiles 7-8mm thick area of each tile exc 0.18 Sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

Note 1 :- The work described in these items shall be executed in buildings up to (G+3 floor) hence the contractor shall make scaffolding arrangements, trestles, ladders, etc. and hessian clothes for protection & all other safety precautions up to 04 storey of buildings and the cost for the same is deemed to be included in the quoted unit rates. Note 2 :- Day to day Complaint received from Users of NOM Varuna and Palam bagh should be resolve on same day. Note 3 :- Removing building materials /old waste unwanted existing material of any description or any type etc. to a distance of 5km or beyond outside MOD Land and the cost for the same is deemed to be included in the quoted unit rates.

SANJEEV ENTERPRISES

M/S SONU ENTERPRISES

A N BUILDERS

MRITUNJYA ASSOCIATES