SPL REPAIR OF BUILDING NO TO 74 OR LIVING ACCN AT 114 FD WKSP COY AT 7014 EME BN AND PROVN OF HARD STANDING PARKING WITH OVERHEAD SHED FOR PARKING VEHICLES AT OFFICE COMPLEX AT 31 RR CDO UNDER GE 865 EWS LEH

Amount

Demolition of cement concrete in ground floor and pavings n'exc 15cm thick below or above ground level complete all as specified and as directed.

M&L for hard wood 2nd class factory made wooden boarded 10mm thick as in floor and skirtings planed one side & edges tonged and grooved or rebated , including backing with thermocol sheets, including dismantlng of old board, complete, all as specified and as directed by Engr-in-Charge.

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in wall panelling, shelves/boarding, including dismantlng of old board, complete, all as specified and as directed by Engr-in-Charge.

M&L for 9mm thick prelaminated particle board medium interior grade, prelaminated one side with decorated choice lamination & other side balancing white lamination fixed with screws to timber frame work as in ceiling, shelves/boarding, including dismantlng of old board, complete, all as specified and as directed by Engr-in-Charge.

M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & lining fixed with nails exc 13 sqcm and n exc 25 sqcm in section, including dismantlng, complete, aall as specified and as directed by Engr-in-Charge.

M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in section, including dismantlng, complete, all as specified and as directed by Engr-in-Charge.

M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws, including dismantlng, complete, all as specified and as directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including wall cement mortar, bedding (But not backing ) and rubbish of premises, complete, all as specified and as directed by Engr-in-Charge.

M&L Non-Skid ceramic Coloured Tiles 7 to 8mm thick(squre/rectanglar) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors over 15 mm screed bed or bedding layers in cement mortar 1:4 Set and Jointed in neat Cement Slurry and Pointed in Colour Cement to match, complete, all as specified and as directed by Engr-in-Charge.

M&L Non-Skid ceramic Coloured Tiles 7 to 8mm thick(squre/rectanglar) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors over 15 mm screed bed or bedding layers in cement mortar 1:4 Set and Jointed in neat Cement Slurry and Pointed in Colour Cement to match, complete, all as specified and as directed by Engr-in-Charge.

M&L for Glazed ceramic coloured tiles in vertical surfaces 350 x 250 x 7mm /450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement mixed with pigments to match over 10mm thick CM (1:4) in dado/skirting tiles, complete, all as specified and as directed by Engr-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc.laid bedded and pointed in any mortar, complete, all as specified and as directed by Engr-in-Charge.

M&L for 75mm thick, cement concrete 1:4:8 (using 40mm graded crushed stone aggreate) as in sub -floors, sub- bases ,floors and pavings,etc., complete, all as specified and as directed by Engr-in-Charge.

M&L for Chequred cement concrete tiles (glazed) 30cm X 30cm X 25mm thick, set ,pointed & jointed in neat cement slurry in floors polished with grey cement & pigments .Layed over 20mm thick cement screed base (1:6), complete, all as specified and as directed by Engr-in-Charge.

Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n'exc 1.5 Sqm each, complete, all as specified and as directed by Engr-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each, complete, all as specified and as directed by Engr-in-Charge.

Hacking out old broken glass (any thick ness, size, quality or description) from wooden panes or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads, complete, all as specified and as directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for angle iron or flat iron as in post and guard bars or grating, complete, all as specified and as directed by Engr-in-Charge.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) confirming to Fe-410 Gde 250 quality A including distance pieces, cleats etc, complete, all as specified and as directed by Engr-in-Charge.

M&L for 75mm thick, cement concrete 1:2:4 (using 20mm graded crushed stone aggreate) as in plinth protection finished even and smooth with out using extra cement, complete, all as specified and as directed by Engr-in-Charge.

M&L Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound Grade 'A' in plinth protection and in floor surface of hard standing, complete, all as specified and as directed by Engr-in-Charge.

M&L sheet glass 3mm thick ordinalry quality and glazing with oil putty or wooden beads in square not exc 0.50 sqm in each pane, complete, all as specified and as directed by Engr-in-Charge.

S&F repair Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, complete, all as specified and as directed by Engr-in-Charge.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section, complete, all as specified and as directed by Engr-in-Charge.

S&F 100mm long aluminium anodized, barrel tower bolt of extruded section, complete, all as specified and as directed by Engr-in-Charge.

S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized, complete, all as specified and as directed by Engr-in-Charge.

S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodized, complete, all as specified and as directed by Engr-in-Charge.

S&F 75mm long aluminium anodized, butt hinges of extruded section, complete, all as specified and as directed by Engr-in-Charge.

S&F 100mm long aluminium anodized, butt hinges of extruded section, complete, all as specified and as directed by Engr-in-Charge.

S&F in repair 250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed, complete, all as specified and as directed by Engr-in-Charge.

S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete(Glass shall be measured Seperately), complete, all as specified and as directed by Engr-in-Charge.

S&F for 40 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats, complete, all as specified and as directed by Engr-in-Charge.

S & F 1000 litres capacity rotational moulded polyethylene water storage tanks inner and out white, two layers ISI marked (Cylindrical vertical, with closed top), hoisted with threaded cap and fixed in position all as specified in SSR Part I including all accessories (ie GI nipple etc), including provn of 20/25 mm dia spout for connecting inlet, outlet, over flow and washout pipes and including dismantling water tanks and removing to store Exc 500 and n exc 1000 ltrs capacity, complete, all as specified and as directed by Engr-in-Charge.

S & F in repair 20 mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210gms./ 25mm-455gms/ 40mm- 690 gms), complete, all as specified and as directed by Engr-in-Charge.

S & F in repair 15mm bore dia Bib tap of PTMT any color high pressure screwed for iron pipe and fixed complete all as specified and as directed(min weight15mm- 90 gms/20mm-125 gms), complete, all as specified and as directed by Engr-in-Charge.

S & F in repair 15mm bore dia pillar tap standard of PTMT of any colour high pressure screwed for iron pipe and fixed to complete all as specified and as directed (minumum weight 15mm 110 gms), complete, all as specified and as directed by Engr-in-Charge.

S & F in repair 15mm bore stop valve standard of PTMT any color high pressure screwed for iron pipes and fixed at position complete all as specified and as directed. (Min wt 15mm 90 gms), complete, all as specified and as directed by Engr-in-Charge.

S & F in repairs 750 mm long, 32/ 40 mm dia., PVC plain Waste pipe for sinks / wash hand basins, complete, all as specified and as directed by Engr-in-Charge.

S & F in repairs, 32 mm CP waste coupling for sink and wash hand basin, complete, all as specified and as directed by Engr-in-Charge.

S & F in repairs Vitreous china wash basin white flat back size 550 x 400 mm excluding taps, waste,chain and plug and porcelain stopper but including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe, complete, all as specified and as directed by Engr-in-Charge.

S&F in repairs viterous China squatting pan or Orissa pattern 580 x 440 mm white with integral foot rest (excluding cistern and flush pipe) but including connection to 100mm dia trap 'P' or 'S', anti syphonage pipe etc, complete, all as specified and as directed by Engr-in-Charge.

S&F in repairs, 10 litres capacity PVC valveless syphonic action type, flushing cistern (ISI marked), low level ,white ,with inlet, ball valve, float and handle including bracket & flush pipe of polyethylene of low or high density or high density or PVC,32mm dia,for low level cistern, complete, all as specified and as directed by Engr-in-Charge.

S & F in repair CP floor gratings 150mm dia, complete, all as specified and as directed by Engr-in-Charge.

Taking up or down 25/32 mm bore stee /PPRl tubing and connections and set aside for re-use or removal to store, complete, all as specified and as directed by Engr-in-Charge.

S & F 25mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge.

S & F 32mm dia 3 layer PP-R polypropyene random copolymer concealed pipes SDR 7.4 (PN 16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete all as per manufacture instructions and as directed by Engineer in Charge.

M&L for preperation and removal of old Steel / CGI Sheet surface any description over 10cm in width or girth and applaying two coat of synthetic enamal paint, complete, all as specified and as directed by Engr-in-Charge.

S&F PVC connections 15 size with PTMT nuts (length 600mm), complete, all as specified and as directed by Engr-in-Charge.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/dense soil, complete, all as specified and as directed by Engr-in-Charge.

M&L Hardcore with broken stone of gauge n exc 63 mm, deposited, spread and levelled and layer n exc 15 cm thick, water and rolled /rammed to a true surface, complete, all as specified and as directed by Engr-in-Charge.

M & L for 100 mm thick, PCC 1:3:6 (using 20mm graded crushed stone aggregate) as in floor of hard standing finished even and smooth with out using extra cement, complete, all as specified and as directed by Engr-in-Charge.

Removing excavated soil material n, exe 50m and depositing where directedat a level n, exe 1.5 m above the starting poit, complete, all as specified and as directed by Engr-in-Charge.

Excavating in post holes (or similar holes) each n exc 0.5 cum in hard/dense soil, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface, complete, all as specified and as directed by Engr-in-Charge.

M & L for PCC (1:4:8) using 40mm graded crushed stone aggregate as in foundation,filling and mass concrete all as specified.

S&F Structural steel works as in tubular roof trusses, purlins, Rafter, vertical posts, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular pipe, channel or flat sections) including distance pieces, cleats , riveting incl bending and welding, conforming to Fe – 410W Gde E -- 250 quality A, complete, all as specified and as directed by Engr-in-Charge.

S&F framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles as necessary, gusset plates, cleats, MS Flat, MS plate, rivetting etc n.exc 10 kg each brackets, conforming to FE 290 Gde E-165, complete, all as specified and as directed by Engr-in-Charge.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of Green colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete, all as specified and as directed by Engr-in-Charge.

S & F for Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/ridge/cladding to wall, fixed with self tapping screws, complete, all as specified and as directed by Engr-in-Charge.

M & L for two coat of synthetic enamel paint over one coat of red oxide priming including preperation of new steel surfaces over 10 cm width or grith not otherwise described, complete, all as specified and as directed by Engr-in-Charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket and power point) complete fittings such as switches, ceiling rose, regulators, socket etc and removing material from site and making good disturbed surfaces of walls, floors/ceiling to match the existing surface, complete, all as specified and as directed by Engr-in-Charge.

Taking down care fully sub main wiring/service wire of any description, complete, all as specified and as directed by Engr-in-Charge.

Point wiring complete with 1.5Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead, complete, all as specified and as directed by Engr-in-Charge for the followings:-

One light/exhaust fan point controlled by one way switch

One switch socket outlet 6 Amps, 230 volts point on Same board

One switch socket outlet 6 Amps, 230 volts point on independent board

Point wiring complete with 4 Sq.mm nominal area of copper conductor multi stranded PVC insulated and unsheathed 1100 volts cable drawn through & including PVC Casing & caping with standard accessories such as elbows, tees, junctions etc. and PVC moulded terminal box with top cover of including PVC insulated unsheathed solid 1.5Sqmm copper conductor cable as continuous earth lead, complete, all as specified and as directed by Engr-in-Charge.

Supply and replacement of lamp holder insulated body with back plate, complete, all as specified and as directed by Engr-in-Charge.

Supply and replacement of Switch piano flush button single pole 6 Amps 230 volts one way, complete, all as specified and as directed by Engr-in-Charge.

Supply and replacement of switch Socket out let two in one 5 pin 6 Amps flush type.230 volts, complete, all as specified and as directed by Engr-in-Charge.

Supply and replacement of switch Socket combination out let multi purpose 5 pin 6 Amps and 16Amps 230 volts, complete, all as specified and as directed by Engr-in-Charge.

Supply and replacement of Ceiling rose, surface Bakelite three terminals, complete, all as specified and as directed by Engr-in-Charge.

Supply and fix in replacement of sheet metal enclosure for DBs double door when MCB's to be used single pole & neutral 240 Volts 8 Ways, complete, all as specified and as directed by Engr-in-Charge.

Supply and fix in replacement of MCB SPN 63 Amp 240 Volts AC ISI marked, complete, all as specified and as directed by Engr-in-Charge.

Supply and fix in replacement of MCB SP 6-32 Amps. 240 Volts 50 HZ, complete, all as specified and as directed by Engr-in-Charge.

M & L for submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC casing Caping wire size 2x6.0 sq. mm + 1x6.0 sq. mm earth wire, complete, all as specified and as directed by Engr-in-Charge.

Supply and Fixing only in Replacement LED light fitting 1X20 W, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, complete, all as specified and as directed by Engr-in-Charge.

Supply and fix in replacement LED luminaire 600mm x 600 mm, 35/36 watt,220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size, complete, all as specified and as directed by Engr-in-Charge.

Supply, fixing, connecting and testing LED security light fitting 35 watt, 230 volt, AC outdoor type with high pressure die cast aluminium housing and heat resistant complete with driver, lamp and bracket with impact and corrossion resistant incl thermal management in multiple optics complete with IP65/66 protection, complete, all as specified and as directed by Engr-in-Charge.

M&L Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the galvanised iron strip 32×6mm by means of bolts, nuts , check nuts and washers of galvanized iron and galvanised iron strip protected by provision of GI light grade pipe 40 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 5 of SSR 2009 Part-I and connecting to MCBDB’s earth test point all as specified or indicated including testing on completion, complete all as specified and as directed by the Engr-in-Charge. Note: 1.Rate quoted deemed to include GI protection pipe, funnel, excavation and earth work, in soft/loose soil with PCC type C1 in bed and pit

Supply and fix Air Circulator fan, steel body AC single Phase 230V of size 300mm sweep with blades, and frame and louvers, complete, all as specified and as directed by Engr-in-Charge.

Supply, laying and testing cable XLPE in replacement Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16.0 sq mm 2 core, complete, all as specified and as directed by Engr-in-Charge.

Excavating in trenches not exceeding 1.5 m wide and not exc. 1.5 mtr in depth and getting out in anay type soil and making good excavated surface, complete, all as specified and as directed by Engr-in-Charge.

Supply and spreading sand for cusioning of electric cable, complete, all as specified and as directed by Engr-in-Charge.

Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 with peak, size 250mm x 150mm x 40mm complete all as specified and directed by Engr-in-Charge.

Returning, filling in including spreading levelling watering and well ramming in layer not exceeding 25 cm, complete, all as specified and as directed by Engr-in-Charge.

Deduct Schedule of Credit of Rs (-) 23504.00 (Minus) as listed in Schedule 'A' (Contd). Contract Sum shall be arrived after deducting the credit amount. Note :- Tenderers will not quote against this item being a firm amount.

M/S Praveen Kumar and Sons (BID ID -3512799)

SHUBHAM ENGINEERS & BUILDERS (BID ID -3512503)

RANA ENTERPRISES (BID ID -3512711)

Mehar Enterprises (BID ID -3506720)

R B TRADERS (BID ID -3512836)

Ashfaq Construction Company (BID ID -3507137)

KAMLA CONSTRUCTION COMPANY (BID ID -3506490)