Construction of Public Park at Munjhadan Mahend, Crate Works, Construction of Lavatory and drinking water facility, Construction of Trail Path, Providing and Fixing of Barbed Wire Fencing and Chain Link Fencing, Planting for Nagar-Van. Lidder Forest.

Amount

A) Construction of Public Park (Nund Reshi Van) for Nagar-Van

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:

Providing and laying of dry stone soling packed tightly incl ramming watering and filling of interstices incl all carriages complete job.

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) incl all carriage complete job

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for :

Park Boundary wall

Carriage of different materials By Mechanical Transport including loading, unloading and stacking

Sand, stone aggregate below 40 mm nominal size avg lead of 30 kms

Sand avg lead 30 kms

Providing and fixing of M.S Iron sheet 3 mm of required pattern for Sign Board fixed in Angle Iron posts ,7.5 feet height , (50x50x6 mm) frame and flat iron 50x6 mm including all necessary fittings,including primimg coat including Mechanical Carriage (Sign Board) 3'x5' Text to be Written as Per Directions of Engineer In-charge.

Providing and fixing of Wooden(water resistant wood) required pattern for Sign Board fixed in robina posts with minimum girth of 14" ,7.5 feet height , including all necessary fittings,including touch wood two coats minimum including Mechanical Carriage (Sign Board) with size of 2.5'x6 x2" Text to be engraved and black colored as Per Directions of Engineer In-charge

Providing of MS Steel Flat Iron Garden Benches 3 seater Including Primer Coat and Steel Oak Wooden Paint including all carriages of to the site.

B) Crate Works Soil Conservation

Supply of Black Annealed Wire Crate made out of 4.00 mm Wire (Wire as per IS: 280) machine woven both ends bent of 100x100 mm mesh size including strengthing with 2mm wire as per required qunatity and as per directions of Engineer-in-charge. including all carriages up to site of work.

Supply of Stones for Constructing vertical bunds with sloping faces, by boulder filling (dry, hand packed tightly); including cost of stones but excluding cost of wirecrates

C) Construction of Lavatory and drinking water facility for Nagar-Van

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:

Providing and laying of dry stone soling packed tightly incl ramming watering and filling of interstices incl all carriage complete job

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) incl all carriage complete job

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement.M20 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mmnominal size)

Lintel Beam,RCC Slab

Raft U/G, septic tank slab, soak pit

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete

Centering and shuttering including strutting, propping etc. and removal of form for :

a) Foundation/ Footing Upto Plinth Level

b) Lintel Beam

c) RCC Slab d) Septic Tank e) Soak Pit

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m.

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete 25mm thick with 12.5 mm nominal size stone aggregate.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and 12 binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more.@ 100Kg/cum of RCC 1:1.5:3

Brick work with F.S.P bricks of class designaion 75 in foundation & plinth, superstructure upto floor V level in cement mortor (1 cement :6 coarse sand).

Dry random rubble masonry with hard stone in foundation and plinth:Without bond stone incl.all carriages complete a) Soak Pit

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): 9.1.5 Second class kail wood

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. First Class kail wood

Providing and fixing of Glass Panes 4 mm thick glass pane (weighing not less than 10 kg/sqm)

Providing and fixing 35 mm thick wire gauze shutters using galavanised M.S wire gauze of average width for aperture 1.4 mm in both directions with wire of dia 0.63 mm for doors ,windows and clerestory windows including ISI marked bright finished or /and black enamelled M.S butt hinges with necessary screws. [first class kail wood].35mm THICKNESS

12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand)

Ceiling Plaster

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by themanufacturer) with water absorption less than 0.08% and conforming to lS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. Size of tile 500x500 mm

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.75litre/10sqm of approved brand and manufacture

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.Two coats (a) interior walls and ceilings (a) exterior Walls

SANITRAY & WATER SUPPLY

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device(handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required : White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.

Providing and fixing wash basin with C.I. brackets,including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm

Providing and fixing of mirror of superior quality with all fittings and fixtures complete.

Cutting holes up to 30x30cm in walls i/c making good the same with common burnt clay FPS non modular bricks

Cutting holes up to 15X15 cm in RCC floors and roofs for passing drain pipes etc. and repairing the hole after insrtion of drain pipe etc. with cement concrete 1:2:4 ,20mm nominal size , i/c finishing complete so as to make it leak proof.

Providing and Fixing PPR pipe lines of approved quality and brand in walls including cost of cutting of chases and filling in the same with (1:3) mix mortar incl cost of all fittings tee/elbows/unions/ sockets etc wherever required of following nominal sizes

25mm dia

20mm dia

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms

Health fucet

Providing and fixing ball valve (brass) of approved quality, with all fittings and fixtures complete.

25 mm dia. nominal bore

20 mm dia. nominal bore

Providing and fixing gun metal gate value C.I wheel of approved quality (Screwed end )25mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in- charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour. weighing not less than 105 gms.

Providing and fixing Polyvinyl Chloride (PVC) pipes, incl all PVC plain fittings This includes jointing of pipes ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. :External work

75 mm nominal dia .Pipes. Vent pipe

75 mm nominal inner dia .Pipes.

100mm nominal inner dia .Pipes.

Providing and Fixing of Connection items: Elbow,Union, Reducer, etc Complete as per the requirement as per direction of engineer in charge.

Providing and fixing Polyvinyl Chloride (PVC) fittings for pvc pipes

P-Trap

100mm door tee

100 mm bend with door

100 mm bends

100 mm TEE

100 mm Connector

75mm Flow Trap with jali

75mm Door Tee

75mm bend with door

75mm Bend

75mm Connector

75mm Tee

Reducer 100mm x 75mm

Vent Cap 75mm

Supply, installation, testing and commissioning of following electrical equipment / items as per technical specifications and directions of Engineer-in-Charge as required.

Lighting points (1.5mm sq. wire).

Lighting Circuits with (2.5mm sq. wire).

Heating Points with SS combine (4mm wire ,15 Amp).

Iron D Box of standrad make,2 way.

MCB DP 32- Amp

Service Line (7/16 wire)

Exhuasters

Concelead LED Bulbs.

Providing, installing and commisioning of RO water purifier with alloy stainless steel having 50 litres capacity,300 GDP Booster Pump 2 nos in 50 LPH RO Membranes 75 GPD 4 nos WAVE Manufacture.

Carriage of different materials By Mechanical Transport including loading, unloading and stacking

a) Bricks avg lead of 45 kms

b)stone aggregate below 40 mm nominal size avg lead of 30 kms

c) Sand 30 km

D) Construction of Trail Path for Nagar-Van

E/W in excavation in foundation trenches or drains (not exceeding 1.5 mts in width as well as 10 sqmts on plan) including dressing of sides & ramming of bottoms, lift up to 1.5mts & lead of 50 mts including getting out the excavated soil and disposal of surplus excavated soil as directed.

Providing & laying dry stone SOLING/PITCHING including ramming, dressing etc complete for the trial path including all carriages upto the site.

Providing & laying of Stone Dust in the voids of drystone soling of trial path including all carriages upto the site.

E) Construction of Main Gate for Nagar-Van

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres:

a)Columns

Providing and laying of dry stone soling packed tightly incl ramming watering and filling of interstices incl all carriage complete job

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering- All work upto plinth level.1:4:8 (1 cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) incl all carriage complete job

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement.M20 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mmnominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for :

a) Foundation/ Footing

b) Columns

Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 m height, backing filled with a grout of average 12 mm thick cement mortar 1:3 ( 1cement: 3 coarse sand) including pointing in white cement mortar 1:2 ( 1 White cement: 2 stone dust) withan admixture of pigment matching the stone shade and curing complete : (To be secured to the backing by means of cramps which shall be paid for separately): Red sand stone - exposed face fine dressed with rough backing 70mm thick

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and 12 binding all complete Thermo-Mechanically Treated bars of grade Fe-500D or more.@ 110Kg/cum of RCC 1:1.5:3

Steel work welded in built up sections/framed work for MAIN GATE, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. To be designed according to the provided design by the engineer in charge

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building, for all heights and all levels wooden walnut colour

Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Text to be written in English/Urdu/Hindi Language and Forest Logo as per the direction Engineer In-charge.

Carriage of different materials By Mechanical Transport including loading, unloading and stacking

a)Sand, stone aggregate below 40 mm nominal size avg lead of 30 kms

F) Providing & Fixing of Barbed Wire Fencing With Angle Iron Posts in Cement Concrete Blocks

E/W in excavation in foundation trenches or drains (not exceeding 1.5 mts in width as well as 10 sqmts on plan) including dressing of sides & ramming of bottoms, lift up to 1.5mts & lead of 50 mts including getting out the excavated soil and disposal of surplus excavated soil as directed.

Providing & laying dry stone solling including ramming, dressing etc complete in foundations and under floors,including carriage & head load

Providing & laying cement concrete 1:3:6 mix using 1 cement : 3 coarse sand : 6 graded stone aggregate 20 nominal size of specificied grade excl cost of centering and shuttering. All works up to plinth Level.

Centering and shuttering including strutting, propping etc and removal of form work for.

Providing and fixing of Angle Iron Posts made of MS Angles including cutting, hoisting, fixing in position and applying a priming coat of approved red oxide steel primer including all carriages from approved source up to site of work complete

Providing and fixing of MS Gate consisting of 50x50x6mm vertical angle 7.5 feet height and frame ,flats 50x6mm including all necessary fittings, applying a priming coat of approved red oxide steel primer and paint including mechanical carriage.Size 4 'x6'

Providing and fixing of M.S Iron sheet 3 mm of required pattern for Sign Board fixed in Angle Iron posts ,7.5 feet height , (50x50x6 mm) frame and flat iron 50x6 mm including all necessary fittings,including primimg coat including Mechanical Carriage (Sign Board) 3'x5'

Providing & Fixing of Black annealed Barbed Wire dia 2.00 mm having barbs at a distance of 75mm,plus-minus 12mm conforming to relevant ISI specification (IS:278 & 280) product code BABW, including all carriages from approved source up to site of work complete 6 STRAND

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade (two or more coats on new steel work) Vertical Posts,and writing logo with paint on board and Gate painting

Carriage of different materials By Mechanical Transport including loading, unloading and stacking

Sand and Bajri average 25-30 Kmts lead

Carriage of materials by head Load from dumping siteupto site of work of work

Sand and bajri average 2 kms

Cement and steel

G) Providing and Fixing of Chain Link Fencing for Nagar-Van

Earth work in exacavation by manual means in trenches for foundations, drains, pipes,cables etc (not exceeding 1.5m in width) and for shafts, wells,cesspits and the like not exceeding 10 sqm on plan,including dressing of sides and ramming of bottoms lift upto 1.5m,including getting out excavated earth and disposal of surplus excavated earth as directed

Providing and laying of dry stone soiling hand packed including ramming,watering and dressing complete and mechanical carriage ,head load etc

Providing and laying of cement concrete of specified grade excl cost of centering and shuttering 1:2:4 (1 Cement, 2 Coarse Sand, 4 graded stone aggregate 20 mm nominal size) crushed

Centering and shuttering including strutting,propping etc and removal of form work for walls,pilaters,plinths,string courses etc

Providing & fixing of Angle Iron Posts made of MS Angles including cutting, hoisting, fixing in position and applying a priming coat of approved red oxide steel primier including wastage and overlap , mechanical carriage from approved source up to dumping site.

Providing & fixing of Black annealed Wire Crate made out of 4.00 mm Wire (Wire as per IS: 280) machine woven both ends bent of 50x50 mm mesh size including strengthing with nuts, bolts and washers as per required qunatity & size and as per directions of Engineer-in-charge. (Chain Link fencing).

Providing and fixing of MS Gate consisting of 50x50x6mm vertical angle 7.5 feet height and frame ,flats 50x6mm including all necessary fittings, applying a priming coat of approved red oxide steel primer and paint including mechanical carriage.Size 4 'x6'

Providing and fixing of M.S Iron sheet 3 mm of required pattern for Sign Board fixed in Angle Iron posts ,7.5 feet height , (50x50x6 mm) frame and flat iron 50x6 mm including all necessary fittings,including primimg coat including Mechanical Carriage (Sign Board) 3'x5'

Applying priming coat With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works

Painting with ready mixed synthetic enamel paint of approved brand and manafacture in all shades to given an even shade. (two or more coats on new steel work).

Carriage of different materials By Mechanical Transport including loading, unloading and stacking

Sand average 50 Kmts lead

Bajri average 50 Kmts lead

Carriage of materials by head Load from dumping site upto site of work

Sand average 1000 Mts lead

Bagri average 1000 Mts lead

Cement and steel 1000 Mts lead

H) Planting for Nagar-Van

Polybag raised sapling of Conifer (Deodar/Kail/Fir) saplings along the contours as well as on flat surface in trenches having trench size (90x45x45)cm.

Planting of broad leaved fruit bearing plants in pits of size (45x45x45)cm including carriage of plants from different Nurseries of Lidder Forest Division Bijbehara.

Planting of broad leaved fruit bearing plants in trenches of size (90x45x45)cm including carriage of plants from different Nurseries of Lidder Forest Division Bijbehara.

Naked root saplings of Conifer (Deodar/Kail/Fir) saplings in staggered pits of size 45 x 45 x 45 cm along the contours as well as flat surface including carriage of plants from different Nurseries of Lidder Forest Division Bijbehara.

Performing of dibbling by manual means using a pointed hand tool for making desired holes in the ground including the cost of atleast two healthy seeds and carriage upto the working site.

Abdul Majeed Hafiz

ABDUL MAJEED WAGAY

farooq ahmad mandoo

ARSHID HUSSAIN SOFI