Construction of Community Hall Building at Chinthamani in ward No. 89

Amount

Earth work excavation in all kinds of soils except hard rock requiring blasting, inclusive of shoring, strutting and baling out water wherever necessary refilling the sides of foundation with excavated earth in layers of 15cm thick well rammed and consolidated depositing the surplus earth within compound in places as shown by the deptl.officers, clearing and leveling the site with initial lead of 10M and lift of 2M etc.Comp.SI.No.62-rate for 10m3 MDU-CORP-BUILDING DATA-P-20-SL No:1

Supplying and filling in foundation and basement with Quarry Dust in layers of 15cum thick well rammed and consolidated including watering complying with std. specification etc.

Cement concrete 1:4:8 (one cement four sand and eight aggregates) Using 40mm gauge hard broken granite jelly for foundation inc. consolidation and dewatering for foundation wherever necessary etc.complete. MDU-CORP-BUILDING DATA-P-21-SL No:10

Brick work in CM 1:5 (One cement and five sand) using country bricks of size 8 3/4"X4 1/2"X2" including curing etc., complete For Foundation and Basement. MDU-CORP-BUILDING DATA-P-36-SL No:27

Brick work in CM 1:5 (One cement and five sand) using country bricks of size 8 3/4"X4 1/2"X2" including curing etc., complete complying with standard specification For Super Structure in GF. MDU-CORP-BUILDING DATA-P-36-SL No:27

Brick work in CM 1:5 (One cement and five sand) using country bricks of size 8 3/4"X4 1/2"X2" including curing etc., complete complying with standard specification For Super Structure in FF. MDU-CORP-BUILDING DATA-P-36-SL No:27

Brick Work in CM 1:3 (One Cement three Sand) using 2nd class bricks in super structure in G.F 8 3/4" x 4 1/4"x2"

Supplying and erecting shuttering with necessary supports for plain surface such as RCC boxing side slab, and similar,RCC Slab with all cross bracings etc., complete in all floors of any height (The retrieved materials should be taken back by the contractor). The payment for centering shall be given after the concrete is laid. (Vertical Portion Only) using steel plates10m2.

Supplying and erecting shuttering with necessary supports for plith beam with all cross brancings etc..,complete(Rcc coloumn footing plinth beam and lintel sides)

Supplying and erecting shuttering with necessary supports for plain surface such as RCC boxing side slab, and similar,RCC Slab with all cross bracings etc., complete in all floors of any height (The retrieved materials should be taken back by the contractor). The payment for centering shall be given after the concrete is laid. (Lintel & Sunshade) using steel plates10m2. Bottom Only

Reinforced cement concrete 1:1 1/2 :3 (One cement One and half sand and three aggregate) using 20mm machine broken gauge bard granite jelly for RCC worksthe rate excluding the cost of reinforcement grills,centering and shuttering etc., complete in G.F.

Supplying fabricating and placing in position of MS grills for reinforcement rate inc. the cost of steel for all works (the rate to include cost of binding wire also). Below 16mm Dia MDU-CORP-BUILDING DATA-P-34-SL No:22

Plastering with CM1:5(one cement and five sand) 12mm thick10m2. MDU-CORP-BUILDING DATA-P-41-SL No:43

Plastering with cm 1:3 (one cement three sand) 10mm thick MDU-CORP-BUILD-DATA-P-39-Sl-36

Plastering with CM1:3(one cement and five sand) 20mm thick10m2. MDU-CORP-BUILD-DATA-P-39-Sl-40

Paving the floor with Double Charged Vitrified Tiles 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work

Fabrication supply and fixing of fully paneled double leaf steel door made of 40x40x6mm MS angle for outer frame and shutter made out of 35x35x6mm MS angle with necessary stiffness 32x6mm and flats at 30cm interval and necessary cross diagonal MS flats. The shutter frame should be fully covered by 18G GR sheet and provided with required locking arrangements and one coat of red oxide paint and primer etc… (TWAD-P-87)

Fabrication supply and fixing of Fully paneled double leaf steel window made of 40x40x6mm MS angle for outer frame and shutter made out of 35x35x6mm MS angle with necessary stiffness 32x6mm and flats at 30cm interval and necessary cross diagonal MS flats. The shutter frame should be fully covered by 18G GR sheet and provided with required locking arrangements and one coat of red oxide paint and primer etc… (TWAD-P-87)

Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being '32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc., complete.-1 m 3 MDU-CORP-BUILDING DATA-P-41-SL No:46

Finishing the top of roof with one course of machine pressed tiles of size 200 mm x 200 mm x 20 mm of approved quality in Cement Mortar 1:3 (One Cement add three sand) 12 mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete MDU-CORP-BUILD-DATA-P-42-Sl-47

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m S.I.333 MDU-CORP-BUILDING DATA-P-54-SL No:75

Painting two coats with ready mixed Cement Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m MDU-CORP-BUILD-DATA-P-57-Sl-87

Labour charges for over head wiring from EB pole to pumproom by fixing 32mm dia GI pipe to the required height over roof slab of pumproom and as directed by EB authorities including fixing M.S. clamp set, U.Kondi, 7/20 GI wire, 7/20 PVC insulated copper wire reels, T.W. meter board, aerial board, earth plate GI Bolt of nuts, PVC Hose fuse wiring etc. complete

Supply and run of 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in 25mm dia GI pipe (Class 'B') suitably bent at both ends with necessary angle iron upright and end supports for mains

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp

Supply and fixing of single box type 18Watts 4'Feet LED flu Fitting complete with wall or ceiling with flu. Tube with PVC unsheated leads from terminals to the fitting. TWAD-DATA-P- 173 -SL No:

Supply and delivery and fixing of G.I. Pipes and specials as per IS Specification. 110mm PVC. Pipe

32 mm PVC. Pipe

32 mm GI. Pipe

25 mm PVC. Pipe

110mm PVC Coupler

110mm PVC Elbow

32mm PVC Coupler

32mm PVC Elbow

32mm PVC Tee

32mm x 25mm Reducer

25mm PVC Coupler

25mm PVC Elbow

25mm x 20mm Tee

1/2'' CP Tap

Providing water closet 580mm size Orissa type Indian make with (P) trap including fixing a pair of foot rests over a bed of brick jelly concrete in LM 1:2 using 40mm broken brick jelly 100 mm thick and top plastered with C.M. 1:3 (one cement and three sand) 20mm thick etc. complete. Colour

Supplying and fixing in position european water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brickjelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. .

Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications (D) MDU Build Data 2021-22 Pg - 62

Supply, delivery & fixing of HDPF tank of 1000 lit Capacity as per ISI 2701/1996.

Providing Rain Water Harvesting arrangements in corporation building by inserting of 150mm PVC slotted casing pipe, including earth work excavation for 900mm precost cement Ring 5nos filling with One, three, Fifth Rings are 40mm metal and Two and Fourth Rings are Sand providing necessary pipe line arrangements eith std specification etc, complete MDU-CORP- Data Page No:92-SL-148

Supply & Delivery of Circular Inspection Chamber including frame with cover (PP with FRP) with load bearing capacity of 1.5 Tons any where in Tamilnadu made as per EN 13598-1:2020 from 100% virgin Polypropylene (PP) material with antirodent grade having internal diameter of 450mm, to be used in buried drains and sewers for gravity system including testing as per relevant standards. It shall be used for receiving / connecting PVC, uPVC, HDPE pipes or DWC/CI/CLAY/RCC, etc. by using of appropriate transition adaptors. Chamber shall have a base confirming EN BS 13598-1 :2020 of suitable size and riser shaft with suitable height . Chambers shall have either straight channel 110mm and 160mm or two extra inlets of 110mm and 160mm at 90°/270° right and left. All chambers shall come with a prefabricated integrated base with appropriate benching with 450 mm internal dia, with 1-inlet/1-outlet 500 mm depth

Add GST 18%

K MURUGANANTHAM (BID ID -1225691)