REPAIR AND MAINT TO ROOF, CEILING, EAVES BOARD ETC AND OTHER CONNECTED B/R WORKS AT 663 ARMY AVN SHARIFABAD MIL STN UNDER AGE (I) CIF (K)

Amount

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering, complete all as specified and directed by the Engineer-in-Charge.

S&F Galvanised, corrugated mild steel sheeting, 0.63mm thick with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275 upto 8m height, complete all as specified and directed by the Engineer-in-Charge.

S&F Galvanised, plain mild steel sheeting, 0.80mm thick as in ridge, hips,valley gutters,drip and straight flashing, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and directed by the Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated profile steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by the Engineer-in-Charge.

S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of colour as approved by AGE(I), having tensile strength of 550 Mpa as in roof covering/cladding to ridges, valley gutters etc. fixed with self tapping screws, complete all as specified and as directed by the Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed by the Engineer-in-Charge.

S&F steel works as in tubular section for post, purlins etc including special shaped washer, angle cleat, hold fast, gusset plate etc. complete using ERW or induction butt welded tubes conformimg to IS 1161-1979 grade St-240 cut or notched forming holes,without any attachment including drilling,fittings,riveting and or welding or connecting with bolts ans nuts ( including rivet or nut and bolt) providing and fitting angle cleats gusset plates etc also for welding plumbing truing up and fixing complete all as specified and directed by the Engineer-in-Charge.

S&F Mild steel, plain, black sheet, 1.25mm thick as in ridges, hips, valley gutters, drip and straight flashings with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and as directed by Engineer-in-Charge.

M & L for applying two coat of synthetic enamelled paint over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 CM girth or width in camouflage pattern all as directed by the Engr in charge

Dismantaling boarding/false ceiling of any description fixed in any postion with nails, complete all as specified and as directed by the Engineer-in-Charge. .

S&F GI frame work size of grid 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from sofit at approx 900 mm centre to centre with GI cleat and steel expansion fasterner with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips acress the intermediate channel at 457mm centre to cnetre including hangers 6mm dia.GI (upto 1200mm length) adjusting level fixed tp roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm ling and expansion hold fasterner 12.5mm dia 40mm long including 4mm thick non asbestos fibre cement building boards fixed or laid/inserted to timber/GI frame work complete all as specified and directed by Engineer-in-Charge.

S&F high density WPC (wood plastic composite) louvers panel as in wall panelling 25 mm thick of any length and width fixed on wall surface including of fixing of L corner, buckle with self tapping screws or any other accessories complete all as specified and directed by Engr-In-Charge. The specification of material is as under:- (a) The length of WPC panel should have in a single piece and width lie between 203mm to 150mm. (b) Looks and feels like natural wood. (c) 100% non-toxic, non-formaldehyde, environmental friendly. (d) Water-proof;termite-proof. (e) No cracking, anti-impact with high density. (f) Anti-UV, good color fastness. (g) No glue, no need to paint and can be painted. (h) Easy installation and low maintenance. (j) Weather resistant. (k) Flame retardant. (l) Colour and make as approved by AGE (I).

S&F 2nd class soft wood boarding, 15mm thick, as in wall panelling, plain one side and edges tongued and grooved or rebated, fixed with nails in any situation including french polishing on surface of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coat upto satification of Engr-In-Charge.

Dismantling of unframed work timber fillets, rails, posts, rafters, purlins etc under 40 sqcm in section, in any position, complete all as specified.

M&L for 2nd class soft wood as in plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads of area exc 13 Sqcm and not exc 25 Sqcm, complete all as specified and directed by Engr-in charge.

M&L for 2nd class soft wood as in plain fillets, bull nosed, splayed, chamfered or rounded on one edge or face clean sawn, secured with nails or brads of area exc 3 Sqcm and not exc 6 Sqcm, complete all as specified and directed by Engr-in charge.

Note :- An amount of Rs. Rs 47,050.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S RATHER STEEL WORKS (BID ID -3309782)

M/s FAYAZ AHMAD BHAT C/O ZAHOOR AHMAD DAR (BID ID -3310023)

CLASSIC JK SUPPLIERS (BID ID -3310111)

M/S SHIMAR STAR GLACIER (BID ID -3304477)

rafiq trading co (BID ID -3304163)

M/S A Q ENTERPRISES (BID ID -3304376)