11.0 mtr. RCC span Bridge Mola Nalla Km.1st RD.400-450. Latitude 32.635385 Longitude 75.651867 High Level Bridge Kathua Upgradation Maintenance- Recomm. Safety Audit

Amount

Earthwork in excavation by mechanical means (Hydraulic excavator) in trenches for foundation, drains, pipes etc. (not exceeding 1.5m in width) and for shafts, wells, cesspits and the like not exceeding 10sqm on Plan, including dressing of sides and ramming of bottoms, including getting out the excavated earth and disposal of surplus excavated earth as directed, including all leads and lift. a) All Kind of soil.

Demolishing RCC work by manually / mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters leas as per direction Engineer-in-charge.

Providing and laying cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:4:8 (1 cement:4 coarse sand:8 graded stone aggregate 40mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Providing and laying cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: a) 1:3:6 (1 cement:3 coarse sand:6 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Reinforced cement concrete work in beams, suspended floor, roofs having slope upto 15˚, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with: a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttreses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centring shuttering, finishing and reinforcement. a) 1:1.5:3 (1 cement:1.5 coarse sand:3 graded stone aggregate 20mm nominal size) (including all leads and lifts carriages of material by MT/HL)

Steel Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. a) Cold twisted bars.

Centring and shuttering including strutting, propping etc.and removal of form work for :

a) Foundation, footings, bases of columns etc. for mass concrete.

b) Columns, pillars, piers, abutments, posts and struts

c) Lintel, beams, plinth beams, girders, bressumers and cantilevers

Hand packing stones in wire crates of B.A. wire 4mm & mesh of size 10cm x 10 cm including cost of stones & wire crates. The wire crates length should not exceed 6.00 mtr (including all leads and lifts carriages of material by MT/HL)

Dumping stones in horizontal i.e. on level including cost of stones (including all leads and lifts carriages of material by MT/HL)

12mm cement plaster in 1:3 mix. finished with a floating coat of neat cement.(including all leads and lifts carriages of material by MT/HL)

Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work).

Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanizd iron / steel work.

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. a) Two or more coat on new work

Finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface etc complete. a) On concrete work.

Providing and fixing post delineators made of ABS round body fitted with 2 Nos. 100mm dia high reflective and refectors and mounted on M.S. pipe of 65mm dia duly powder coated with anti rust and anti theft steel to be installed as per direction of Engineer-in-charge.

Carriage of the following materials by Mechanical Transport from source to site of work incl. loading, unloading and stacking complete :- a) Sand from Billawar crusher for an average lead of 27.00 Km. by M.T b) Stone aggregate 40mm nominal size & above from Billawar crusher for an average lead of 27.00 Km. by M.T c) Stone aggregate (Crusher bajree) below 20mm nominal size from Billawar crusher for an average lead of 27.00 Km. by M.T d) Stones / boulders from local nallah for an av. Lead of 3.00 km. by M.T.

SANJEEV SHARMA

Kuldeep Kumar

BISHAN DASS VAID