Upgradation of park at sector 8 Upper roop nagar in ward no. 62

Providing and Fixing Stainless steel benches of 304 grade SS welded contt fully assembled with embeded type feet 3 seater capacity as per the design approved by the Engineer in charge including the cost of embeding thefeet in concrete base after making necessary troughs. the concrete base shall be of mix M10 laid over levelling cource of M5. The cost includes the Carriage of all the materials required for the complete job.:

Providing and fixing designing of Leg Press of size 2000 x 550 x 1600 mm fabricated with man post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia of equipment’s etc. all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated. All pipes are welded with joints as necessary and dressed off removing sharp edges and burns. Zinc primer paint to be applied at all welding point prior to finishing. Pedals and base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self-lubricated. All open end of pipe to be closed by GI/LLDPE caps for safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer in charge regarding material, shape of equipment colour on metal, seat and base cover plate and fixing of equipment’s etc. ( Complete Job)

Providing and fixing Air Walker of Air swing in pair of size 1100 x 550 x 1480 mm. Fabricated with man post of 114 mm dia and 2.5 mm thick and rest of the pipe 40 mm dia all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated. All pipes are welded with joints as necessary and dressed off removing sharp edges and burns. Zinc primer paint to be applied at all welding point prior to finishing. Pedals and base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self-lubricated. All open end of pipe to be closed by GI/LLDPE caps for safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer in charge regarding material, shape of equipment colour on metal, seat and base cover plate and fixing of equipment’s etc. ( Complete Job)

Providing and fixing of Twister Triple bar of specified size 1400 x 1400 x 1350 mm fabricated with man post of 114 mm and 2.5 mm thick. All pipes are welded with joints as necessary and dressed off removing sharp edges and burns. Zinc primer paint to be applied at all welding point prior to finishing. Pedals and base plate cover shall be made of plastic with rounded edges to prevent any impact of injury and UV resistant. Bearing used shall be maintenance free, duly oil sealed and self-lubricated. All open end of pipe to be closed by GI/LLDPE caps for safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer in charge regarding material, shape of equipment colour on metal, seat and base cover plate and fixing of equipment’s etc. ( Complete Job)

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: All kinds of soil :

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Chequerred precast cement concrete tiles 22mm thick in footpath on 20 mm thick bed of cement mortar 1:4 as per the Direwctions of Engineer -In- Charge.

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.

Providing and fixing 0.5 H.P Electric Motor with (2'-6' x2.6 x2.6) feet Sized Motor Room , Complete job including all Pipes , Ball Valves etc as per the Direwctions of Engineer -In- Charge.