REPAIR OF GI CHARPOY, REPAIR AND REPAINTING TO STEEL FURNITURE, REAPIR/RECANNING /POLISHING TO CERTAIN WOODEN FURNITURE OF OMQ, SMQ, OTM ACCN AT AF STN THANE (SITE P,R) AND AF STN KHANERI HILL UNDER GE (AF) THANE

Amount

Removal of below existing unserviceable components of vario Old U/S furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components / discorded components as mentioned including tightening the joints, placing every part in-tact and painting / polishing the disturbed portion, as applicable as per drgs. (B) Work will be executed where the furniture exist in different USER Units of GE(AF) Thane including BSO's Furniture Yard as directed by Engineer-in-Charge. (THIS NOTE IS APPLICABLE TO ALL ITEMS INCLUDED IN BOQ) 1. Almirah Large Steel, Almirah Small Steel & Almirah Med Steel (FD-1031/67(M)/1032)

a) Removing Old U/S 6 Liver Lock with S & F new 6 Liver Lock with Duplicate Key as shown in drg.

b) Removing Old U/S handle with S & F new handle 150mm long as shown in drg.

c) Removing Old U/S hings with S & F new hings as shown in drg

d) Removing Old U/S Leg with S & F new Leg of Almirah Large Steel as shown in drg

e) Removing Old U/S Leg with S & F new Leg of Almirah Small Steel as shown in drg

f) Removing of Old U/S shelves of Almirah Large Steel and supply and fix new shelves of Almirah Large Steel all as shown in drg.

g) Removing of Old U/S shelves of Almirah Small Steel and supply and fix new shelves of Almirah Small Steel all as shown in drg.

h) Removing Old U/S Locking assembly with iron plate & 02 rods 10mm & lock cover & S/F new locking assembly set complete of Almirah Large Steel as per drg.

j) Removing Old U/S Locking assembly with iron plate & 02 rods 10mm & lock cover & S/F new locking assembly set complete of Almirah Small Steel as per drg.

2. Chair writinng MAP/Chair steel with Arms and co Old U/Shioh seat and Back/ Chair visitor (FD/E6/MAP/12,TP,( Godrej and Durian))

(a) Removing Old U/S Upholstry of seat and S&F new best quality upholstry of seat duly of stiched as per exsiting upholstry of chair and drg

(b) Removing Old U/S Upholstry of back and S&F new best quality upholstry of back duly of stiched as per exsiting upholstry of chair and drg

c) Removing Old U/S Handle and S&F New Handle as per drg

3. Chair Computer/ Revolving with Arms/w/o Arms (FD/E6/MAP/01/TP),( Godrej and Durian)

(a) Removing Old U/S star Base and S&F New star base as per drg

(b) Removing Old U/S castor wheel and S&F New castor wheel as per drg

(c) Removing Old U/S hydrolic gas pump and S&F new hydrolic gas pump as per drg

d) Removing Old U/S handle and S&F new handle as per drg

e) Removing Old U/S upholstry of seat with S & F new good quality of upholstry of seat matching with existing as shown in drg

f) Removing Old U/S upholstry of Back with S & F new good quality of upholstry of Back matching with existing as shown in drg

4. Charpoy GI Pipe Ply top (FD-220 ) , (FD/E6/MAP-II/01)

a) Removing of the existingh Old U/S long rail and Supply & Fixing new long rail with 32mm dia GI Pipe including both end threaded suitable for fixing elbow complete all as shown in drg as specified and directed.

b) Removing Old U/S broken short rail and fixing new short rail made out of old broken long rail obtained from 4 (a) above including both end threaded suitable for fixing elbow complete all as shown in drg as specified and directed.

c) Removing Old U/S broken Leg and fixing new leg made out of old broken long/short rail obtained from 4 (a) & (b) above including both end threaded suitable for fixing elbow complete all as shown in drg as specified and directed.

d) Removing of Old U/S Elbow 3 way and supply and fix new GI Elbow 32mm dia ISI marked.all as shown in drg as specified and directed.

e) Removing of Old U/S Checknut and supply and fix new checknut all as shown in drg as specified and directed.

f) Removing old unserviceable plywood from GI pipe & supplying and fixing 12mm thick plywood boiling water proof IS ; 710 of size 1980 x 900mm to GI pipe frame by privifing 03 Nos of black painted flat Iron of size 40mm x 6mm length equal to width of GI Charpoy bending the flat iron the shape reqd to fix it tightly to GI Charpoy with the help of nut, bolt & washer of size 62-65mm & 6mm dia by drilling holes into GI pipe alongwith any welding if required . The plywood shall be fixed on the charpoy by drilling 16 Nos holes (03 nos each long Rail & 02 Nos on each iron flat ) & fixing it with nut bolt and washer of size 62-65mm and 6mm dia & tightening the complete frame , Rest all as directed by Engr - In charge .( Ply wood Make-Green Ply/Kit ply/Century/Archidply

5. Chair verandah (FD-359/256)

(a) Removing Old U/S canning of seat of chair verancah and recanning of seat of chair verandah with new cane as per drg.

(b) Removing Old U/S canning of back of chair verandah and recanning of back of chair verandah with new can as per drg

(c) Removing of Old U/S Rubber shoe and supply and fix new rubber shoe as per drg.

6. Chair CBA Steel with Arms FD-75(M)

(a) M&L for removing Old U/S Handle from chair CBA and supply & fix new handle of 1st class teakwood to chair as per drg all as specified and directed.

(b) M&L for removing Old U/S seat made up of 1st class teak wood from chair CBA and supply and fix new seat to chair as per drg all as specified & directed

(c) M&L for removing Old U/S back made up of 1st class teak wood from chair CBA and supply and fix new back to chair as per drg all as specified & directed

(d) M&L for cleaning the steel surface of chair CBA with arms by scraping with emery papers filling the holes where ever required and shall be painted externally with two coat of synthetic enamel paint of approved shade and make.

7. Chair CB Steel without Arms FD- 75 (M)

(a) M&L for removing Old U/S seat made up of 1st class teak wood from chair CBB steel without arms and supply and fix new seat to chair as per drg all as specified & directed

(b) M&L for removing Old U/S back made up of 1st class teak wood from chair CBB without arms and supply and fix new back to chair as per drg all as specified & directed

(c ) M&L for cleaning the steel surface of chair CBA without arms by scraping with emery papers filling the holes where ever required and shall be painted externally with two coat of synthetic enamel paint of approved shade and make.

8. Bed hard steel (MAP) (FD/E6/MAP/08R)

(a) M & L for removing old broken/ unservicable Prelaminated particle board of head board of bed hard and S & F new 18mm thick plywood size 634mm x 196mm BWR Grade as per IS - 303 approved specification Make Archid ply/Century/Green Ply covered both sides with laminate sheet of approved shade by Engr-in -charge with 18mm x 4mm thick teak wood beading all round the edges of ply complete rest all as specified and shown on drg an directed by Engr -in - charge.

b) M & L for removing old broken/ unservicable Prelaminated particle board of foot board of bed hard and S & F new 18mm thick plywood size 638mm x 314mm BWR Grade as per IS 303 approved specification Make Archid ply/Century/Green Ply covered both side with laminate sheet of approved shade by Engr-in -charge with 18mm x 4mm thick teak wood beading all round the edges of ply complete rest all as specified and shown on drg an directed by Engr -in - charge.

c) M & L for removing olf broken/unserviceable Ply top of Bed hard steel and S & F new ply top of 12mm thick of size 1974mm x 850mm BWR Grade as per IS 303 approved specification of Make: Archidply/Century Ply/Green Ply with fixing in position all as shown on drg with suitable size screws & cup washercomplete all as specified and shown on drg and directed by Engr - in - charge.

d) M & L for preparation of old steel surface of bed hard by scraping /r Old U/Sting /denting and applying 2 coats of synthetic enamel paint colour black in shade of Make : Berger/Nerolac/Asian with spray gun machine complete as directed by engr- in - charge.

9 . TV TROLLEY : (FD/E6/MAP/15)

a) Removing unseviceable top and supply and fixing new top os size 750mm x600mm shall be made up of 18mm thick ply wood BWR grade of Make : Archid/Century/greenply) of with both side laminated with laminate sheet of make : Archid/Century/green ply of approved colour / shade as directed by GE / Engr -in -charge with polished 4 mm thick teak wood beading all rounfd the drg.

b) All as per item No. 9.01 here-in- before but sides of TV trolley of size 700mm x 500mm

c ) All as per item No. 9.01 here-in- before but back of TV trolley of size 700mm x 550mm

d) Removing old unserviceable castors wheel and supply qand fixing new castors wheel 50mm dia swivel types suitable for TV trolley all as shown on drg .

e) Removing old broken glass and supply and fixing two side movable 2 glass shutter of size 700mm x 275mm on almn channel fixed on front door alround . Glasses shall be of 5mm thick Make; Saint Gobin/modi Guard /swastik fixed with steel wheel of appropriate size for sliding channel irrespective of what shown on drg.

10. Locker bed side steel FD-1029 : - supplying & fixing the following parts in replacement of the old existing unserviceable parts of the locker as qpproved , shown on drg & as directed by Engr- in- charge.

a) Removing Old U/S 6 Liver Lock with S & F new 6 Liver Lock with Duplicate Key as shown in drg.

b) MS steel CP handles high quality 100mm long as per drg.

c) CP steel conduit 19/20mm dia hanging rod with brackets 16 guage as per drg.

d) Removing of Old U/S shelves of locker bed side steel and supply and fix new shelves of locker bed side steel all as shown as per drg.

11.Table 3'x2' with Drawer Steel FD-1008

(a) Removing of Old U/S Table TOP and S&F New Table TOP as per Drg

(b) Removing of Old U/S Rubber Shoe and Supply and fix new rubber shoe as per drg

(c) Removing of Old U/S Drawer and Supply and fix new Drawer as per drg

12. Charpoy MS angle with hard Top :- (FD//MAP-II/01 )

M & L for removing off broken/unserviceable Ply top of Bed hard steel and S & F new ply top of 12mm thick of size 1974mm x 850mm BWR Grade as per IS 303 approved specification of Make: Archidply/Century Ply/Green Ply with fixing in position all as shown on drg with suitable size screws & cup washercomplete all as specified and shown on drg and directed by Engr - in - charge.

b) M & L for preparation of old steel surface of bed hard by scraping /r Old U/Sting /denting and applying 2 coats of synthetic enamel paint colour black in shade of Make : Berger/Nerolac/Asian with spray gun machine complete as directed by engt- in - charge.

M&L for spot welding of broken joints etc. Vario Old U/S steel furniture not exceeding 2.5cm in length including scraping, preparing surace of welded portion by grinding and buffing to make fit for painting and applying one coats of synthetic enamel paint over a coat of red oxide primer on welded portion to match with existing painting. (FD-67,1031,1032, 106(M), 1038, 85,106, 129(M), 1038,,75(M), 84(M), 1003,1004,75,258,77(M), 1029, 257, 255, 208, FD/E6/MAP/02(R), FD/E6/MAP/05, FD-165(M), 1007, 1008, 1009,77, 1027, 90(M), 1028

14. Repainting of old painted surfaces of the following steel furniture and touching with red oxide primer where necessary prepairing surfaces and painting one coat SE paint/ powder coated paint as where required as per drg and directed by Engr-in-charge.

a).Almirah Large Steel FD-1031/67(M)

b) Almirah Small/Medium Steel FD-1032/67(M)

c) Locker Bed Side Steel FD-1029

d) Chair verandah FD-359/256

15. Table 3'X2' or 900X600mm with / without Drawer :

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Legs as per drg

c) Long rail as per drg

d) Short rail as per drg

e) Long Stiffener as per drg

f) Short stiffener as per drg

g) Drawer as per drg

h) Knob as per drg

16. Table 3'X3' wooden :- FD-1009

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Legs as per drg

c) Long rail as per drg

d) Short rail as per drg

e) Long Stiffener as per drg

17 Table Dining for 6 / 8 persons FD-239/273 FD-274

(a) Top made up of 18mm thick prelaminated MDF board exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, ISI marked of approved shade and make with 6mm thick teak wood beading all around, all as specified and directed.

(b) Legs

(c) Long rail

(d) Short rail

18. Table Writing FD-275

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Legs as per drg

c) Foot Rest as per drg

d) Stiffener as per drg

e) Sides of cabinet with 18mm thick ply wood with 1.5mm thick lamination as per drg

f) Short Rail as per drg

g) Front/Long Rail as per drg

h) Drawer as per Drg

j) Anodized Aluminium Knob as per drg

k) Cabinet Door with locking system

19. Peg Table : FD-384/277/236

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Legs as per drg

c) Short rail as per drg

d) Long rail as per drg

20. Table bed side :- FD/E6/MAP/15,FD-276

(a) M&L for removing Old U/S old top/ sides of table bed side and supply and fix new top/side made out of 18 mm thick decorative pre-laminated MDF board exterior grade of approved shade and make with 6 mm TW beading all around (size of top 450x450mm) rest all as specified & directed).

(b) M&L for removing Old U/S old back of table bed side and supply and fix new back of exisitng size made out of 12 mm thick BWR Grade plywood

(c) M&L for removing Old U/S Knob from drawers of table bedside and supply and fix new decorative CP handle 75mmof approved design and make. rest all as specified and directed.

(d) M&L for removing Old U/S 18mm MS Square pipe and S&F new MS pipe duly powder coated in Chocobrown colour and fixing necessary PVC shoe

21. Table Centre :FD-274 / 235/29

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charge.

b) Legs as per drg

c) Front/Rear Rail as per drg

d) Side Rail as per drg

22. Teapoy : FD-278, 232, 382, 343(M)

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charge.

b) Front Rail as per drg

c) Legs as per drg

d) Side Rail as per Drg

e) Stiffner as per Drg

23. Bed Plywood Top / Hard Bed : FD-246/ 247

a) Long rail as per drg

b) Short rail as per drg

c) Foot board as per drg

d) Head board as per drg

e) Stiffeners as per drg

f) Removing Old U/S/ old plytop with 12mm thick BWR (IS-303) marked plywood as per drg. Make-Greenply, Kit Ply (Vista), Century ply, Archidply

24. Chair Dinning FD-69/228/279

a)Canning as per drg

b) Front Leg as per drg

c) Back/Rear Leg as per drg

d) Leg Stiffner as per drg

e) Front/Rear/side Rail as per drg

f) Back Stiffner as per drg

25. Chair Easy FD-229/17

a)Canning including seat and back as per drg

b) Front Leg as per drg

c) Back/Rear Leg as per drg

d) Front/Rear Rail of seat frame as per drg

e) All types of rail of back frame as per drg

f) Side Rail of seat frame as per drg

g) Armrest as per drg

26.Chair Writing FD- 280/250

a)Canning as per drg

b) Front Leg as per drg

c) Back/Rear Leg as per drg

d) Leg Stiffner as per drg

e) Front/Rear/side Rail as per drg

f) Back Stiffner as per drg

g) Armrest as per drg

27. Sofa set Single/ two /Three/ four/ five seater with Arms FD-281/258/373/MAP-II/02

(a) Opening & Taking out old Unserviceable Cushion cover and Supply & Fix new Cushion cover made out of approved tapestry cloth not less than Rs 400/-per mtr of 48" wide duly stiched with fine thread all as specified and directed in respective drgs.

(b) Replacement of Old U/SFront/Rear Leg as per Drg

(c) Replacement of Old U/S Batten of seat and back as per Drg

(d) Replacement of Old U/S Arms as per Drg

(e) Replacement of Old U/S front/rear/side rail of single seater of as per Drg

(f) Replacement of Old U/S front/rear rail of 3 seater of as per Drg

(g) Taking out old Unserviceable Cushion and Supply & Fix new Cushion make Sleepwell/ Kurlon or Equivalent 40 density rest all as specified and shown on respective drgs.

(h) Replacement of Old U/S side rail of 3 seater of as per Drg

28. Chair Dining with Cushion FD/E6/MAP/10

(a) Replacement of Front leg as per drg

(b) Replacement of Rear leg as per drg

(c) Replacement of Stifner as per drg

(d) Replacement of front/rear/side Rail as per drg

(e) Replacement of seat including Tapestry cloth c Old U/Shion and ply as per drg

(f) Replacement of Rear verticle strips as per drg

29. Dressing Mirror Gents (MAP) FD/E6/MAP/16

a) Mirror as per drg, Make-Modiguard, Atul

(b) Back ply as per drg

c) Maganatic catcher as per drg

(d) Hinges as per drg

(e) Glass shelves with mtg arrengement as per drg

(f) wall mounting arrangement as per drg

30. Table Dining 1200X900MM : FD-273, 30

a) Top with 18/19mm prelaminated board Ext Gde with 6mm thick teakwood beeding of approved/existing shade as directed by Engineer-in-Charege.

b) Triangular wooden bracket 100X100X20mm thick

c) Legs as per drg

d) Long Rail as per drg

e) Short Rail as per drg

31 . M&L for french polishing of two coat to the following furniture articles all are of MES pattern viz F/DB/FD series or Similar items incl applying wax for depressed surface before polishing all as specified and shown on drgs and shade as applicable or as directed by Engineer-in-Charge.

(a) Bed Plywood Top FD-246/247

(b). Chair Dinning FD-69/228 FD/E6/MAP/10

(c). Chair Writing FD-280 /250/20

(d) Chair easy FD-229/17

(e). Locker bed side wooden FD-54,222

(f). Peg table FD-384/277/236

(g) Sofa Set 5/4seater FD-281/258

(h) Table dining 6/8 pers FD-239 /273

(j) Table 900x600mm with/without Drawer FD-88/224 /231/291 /284 / 283/41(M)

(k) Table centre FD-235/274/29

(l) Table wrtiting FD-275

32. M&L for Melamine polishing of two coat to the following furniture articles all are of MES pattern viz F/DB/FD series or Similar items incl applying wax for depressed surface before polishing all as specified and shown on drgs and shade as applicable or as directed by Engineer-in-Charge.

(a) Bed Plywood Top FD-246/247

(b). Chair Dinning FD/E6/MAP/10

(c). Chair Writing FD-280 /250/20

(d). Peg table FD-384/277/236

(e) Sofa Set 3 seater FD-281/258

(f) Sofa Set single seater FD-281/258

(g) Table dining 6/8 pers FD-239 /273

(h) Table centre FD-235/274/29

(j) Table wrtiting FD-275

(k) Teapoy FD-278, 232, 382, 343(M)

(l) Chair easy FD-229/17

(e) Sofa Set 3 seater FD-281/258

GAJANAN SALES CORPORATION (BID ID -3236741)