Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹3.7 Craccepted-aoc | ₹3.7 Cr | accepted-aoc |
Tender Value
₹3.9 Cr
EMD Value
₹5.9 L
Closing Date
5 Dec 2025, 10:00 pmClosed
Public Works Department
D N SRIDHAR
CONSTRUCTION OF RETAINING WALL TO THE ONGOING NEW MODEL COURT BUILDING AT CHIKKAMAGALURU
PWD/2025-26/BD/WORK_INDENT27788
PWD/2025-26/BD/WORK_INDENT27788
Open
Buildings
Two Tender Document System(Two Cover)
PWD Division Office Chikkamagaluru
9 documents required · 9 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
To qualify for Award of this contract, each Tenderer in its name should have in the last five years i.e.2020-21, 2021-22, 2022-23, 2023-24 & 2024-25 3.2(b)satisfactorily completed as prime contractor, at least one similar work such as Construction of Bridge/Retaining wall work of value not less than Rs.196.08 lakhs.
The Tenderer should have executed in any one financial year (in the last five years i.e. 2020-21, 2021-22, 2022-23. 2023-24 & 2024-25 3.2(c) the following minimum quantities of work 1. Earthwork excavation /embankment/sub grade -8063.00 m3 2.PCC/RCC - 2165.00 m3 3. TMT Steel -133.47 MT work done Certificate issued by the competent Authority of rank not below the rank of Executive Engineer.
Owning the following key and critical equipment for this work TO BE OWN 1. Tippers-02Nos, 2. Excavator/JCB-01 No, 3.Concrete Mixer -02 Nos, 4. Centering materials and formwork-250 m2, 5. Water Tanker-01 No For OWN/HIRE/LEASE 1. Tippers- 02Nos 2. Excavator/JCB-01 No 3. Concrete Mixer -02 Nos 4. Centering materials and formwork-250 m2, 5. Water Tanker-01 No
A copy of Valid KPWD registration certificate (Class II and above)Certificate issued by the competent authority
Statement indicating the (A) Existing commitments and ongoing works for the next 6 months , (B)Details of works for which tenders are already submitted . The statements should furnished as per statement 1.5 (A),(B) of Section 3 of Qualification information in Standard Bid document.
To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21, 2021-22, 2022-23, 2023-24 & 2024-25 3.2(a) achieved in at least two financial years a minimum financial turnover of Rs. 784.31 Lakhs, (in all classes of Civil Engineering Construction works only) Balance sheet & Profit & Loss Account indicating contract receipts issued by the competent accountant / Authority with UDIN number
Each tenderer should further demonstrate liquid assets and / or availability of Credit facilities of not less than Rs.117.65Lakhs (Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc.
EMD for Rs. 100000.00 shall be paid through KARNATAKA PUBLIC procurement PORTAL (KPPP) and the Balance of Rs.4,88,233.00 by Bank Guarantee issued by Nationalised/Scheduled Bank or demand draft/bankers cheque/specified small savings instruments online/ or offline modes of e-payment. bidder should upload the scanned Copy of such original document issued by Nationalised/Scheduled Bank IN KPPP. The bidder has to submit the uploaded original Bank guarantee or other documents which described above before entering the agreement if awarded.
₹5,000
₹5.9 L
5 Dec 2025
20 Nov 2025
6 Dec 2025
2 Dec 2025
1 Dec 2025
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...
Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (R...
Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/basalt crushed graded coarse aggregates and fine aggr...
Provision of an Reinforced cement concrete crash barrier at the bridge deck & approaches to bridge structure, constructed withReinforced cement concrete with TMT reinforcement conforming to MORT&H spe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Mechanical Means -
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...
Supply of ISI mark 175mm nominal bore,plain and steel casing pipe grade of steel Fe 410 of wall thickness conforming to IS 4270-2001 and latest ammendments, electrical resistance welded steel tubes, m...
Providing and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and ...
Providing and laying in position cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tyin...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
27788 Bid doc KW 4.doc
Tender Document • 4.48 MB
GST DECLARATION CERTIFICATE.docx
Others - GST DECLARATION CERTIFICATE • 0.01 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .