Installation of Musical Fountain with Beutification of Lakes in Ovala - Majiwada Constituency in Thane Municipal Corporation.

Amount

Dismantling stone masonry in lime or cement mortar including stacking the materils as directed with all leads, lifts etc.

Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete

Excavation for foundation of structure as per drawing and technical specifications including setting out, construction of shoring , brushing, removal of stumps and other deleterious matter, dressing of side and bottom and back filling with approved materi

Excavation for foundation of structure as per drawing and technical specifications including setting out, construction of shoring , brushing, removal of stumps and other deleterious matter, dressing of side and bottom and back filling with approved material etc. complete. (in marshy soil by mechanical means).

Excavation for foundation in earth, soils of all types, sand, gravel and soft murum, including removing the excavated material upto a distance of 50 m. beyond the building area and stacking or spreading as directed, dewaterin, preparing the bed for the foundation and necessary back filling, ramming, watering, including shoring and strutting as necessary complete. ( Spec.No. : Bd.A.1Page no 259/ CSR Page No.150

Excavation for foundation in Hard murum including removing the excavated material upto a distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift from 1.5 to 3.0m.) By Mechanical Means

Dewatering on BHP basis by using water pump including diversion of stream, providing cofferdams, earthern bunds etc. as may be necessary for foundation and other parts of the the works and pumping out water during and after excavation as may be required by using 3.0 BHP pump etc. complete. (prior approval of Superintending Engineer will be necessary)

Providing soling using 80 mm size granite / quartzite / gneiss / trap metal in 15 cm. layer including hand packing filling voids with sand / grit, ramming, watering complete. (Spec. No. : As directed by Engineer-in-charge /Page No. 154)

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. work in foundations like raft, strip foundations, grillage and footings of R.C.C. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks,compaction and curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying in situ / ready mix M-30 plain cement concrete of trap / granite / quartzite / gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of "V" shaped false joints to form suitable panels on the faces to approved esign with compacting by vibrating and curing complete,including plywood / steel formwork centering (excluding dewatering by means of pump) and including bailling out water and curing finishing in CM 1:3 etc. complete. as directed by engineer incharge basic rate shall be increased for height above 5.00 min follow in hmanners (a) Height upto 5M. (With Concrete Mixer) With fine agreegates of required specifications ( VSI sand finely washed etc ) i) Height up to 5 m, normal rate. ii) Height 5 to 7.50 m, add 5 percent extra over basic rate. iii) Height 7.50 to 10 m, 7.50 percent extra. iv) Over 10 m Height, add 10 percent extra for every 2.50m rise.

Providing and laying in situ M-20 cement concrete of trap / granite / quartzite / gneiss metal with 15% plum of trap stones for foundation and bedding of retaining walls and jetty etc. including necessary form work, compacting, curing, bailing out water manually intidal range etc. complete.

Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete.

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. layersincluding watering and compacting etc. complete.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing preconstructional antitermite treatment as per I.S. 6313 (Part-II) by treating the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper.

Providing and laying Cast in situ/Ready Mix cement concrete M-30 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and laying Cast in situ/Ready Mix cement concrete in M-25 of trap /granite /quartzite /gneiss metal for R.C.C. beams and as per detailed designs and drawings or as directed including steel centering, formwork, coverblocks, laying /pumping, compaction and roughening the surface if special finishish to be provided and curing etc. complete. (Excluding reinforcement and structural steel). withfully automatic microprocessor based PLC with SCADA enable dreversible Drum Typemixer/concreteBatch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand

Providing and fixing in position HCRM/CRS (Corrosion Resistant Steel) bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing Autoclaved Aerated Concrete Block masonary of conforming to IS:2185 (Part3) -1984 in extra fine jointing mortar of fixoblock of Ultra Tech or equivalent in superstructure including striking joints, raking out joint sand scaffolding etc. Complete. (The test shall be carried out conforming to IS:6441 (Part I) - 1972)

Providing and constructing masonry in Auto claved Areaclaved (Celluar) Concrete Block of aproved manufacturer confirming to IS2185 Part III 1984 of size (625 x 240 x 100) mm in extra fine jointing mortar of fixoblock of in half brickthick wall including 2 hoopironstrips 25 mm x1.6 mm at every third course, properly bend and bonded at end sscaffolding racking out joints and watering complete

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in foundation and plinth of inner walls / in plinth of external walls including bailing out water manually, striking joints on unexposed faces and watering etc.complete.

Providing uncoursed rubble masonry of trap / granite / quartzite / gneiss stones in cement mortar 1:6 in superstructure including racking out joints when plastering is to be done / striking joints when no plastering is to be done on inside watering and scaffoldingetc.complete.

Providing and casting in situ / ready mix PCC M20 grade of trap metal for coping to head walls / parapet including centering, form work, compaction and curing etc. complete. (with reversible drum type mixer/ concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc ).

Providing and laying Cast in situ / Ready Mix cement concrete in M20 of trap / granite / quartzite / gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, form work, laying pumping, compacting, roughening the mif special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer / concrete Batch mix plant (Pan mixer) etc.complete.Withfine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete in M15 of trap / granite / quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting,roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and casting in situ / ready mix PCC M20 grade of trap metal for coping to head walls / parapet including centering, formwork, compaction and curing etc. complete. (with reversible drum type mixer / concrete batch mix plant (pan mixer) with SCADA with fine agreegates of required specifications (Natural sand / VSI sand finely washed etc )

Providing and constructing gabain structures for erosion control, river training works and protection works with wire crates of size 2.0m x 1.0m x 0.30m each divided into 1 m compartments by-cross netting, made from 4 mm galvanized steel wire @ 32Kilogramper 10 One Square Metre having minimum tensile strength of 300Mpa conforming to IS:280 and galvanizing coating conforming to IS 4826, wovan into mesh with double twist, mesh size not exceeding 100 x 100mm, filled with boulders with least dimension of 200mm, all loose ends to be securely tied with 4mm galvanized steel wire etc. complete.

Providing and laying Needle Punched and mechanically bonded non woven Geotextile of Type III indigenously manufactured from high quality Propylene staple fibers (continuous filament will not be accepted) on the prepared subgrade for Seperation.( For use this item SE/CE permission is obligatory.)

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing internal cement plaster 20mm. Thick in Single coats in cement mortar 1:3 with out neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.

Providing internal cement plaster 12mm. Thick in Single coats in cement mortar 1:3 with out neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. complete.

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 without neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete

Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:3 without neeru finish to concrete surface in all positions including scaffolding and curing etc. Complete

Providing and applying gypsum plaster (with Gypsum materia l) with finishing with gypsum material in 10 to 13 milli meter thickness to previously plastered surface /or on newly brick surface (Excluding rough cast plaster) in all position including preparing and Finishing the surface scaffolding etc.complete.

Providing and fixing heavy duty inter locking concrete Rubber mould glossy paving blocks of 80 mm thickness of having a strength of 400 Kilogram / Sq.cm. of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including skirting joints and cleaning etc. complete. (using 100% crushed sand)

Providing and applying priming coat on concrete / masonary / Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.

Back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material)

Providing and applying Royale Luxury Emulsion of approved make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. wall primer with brush by adding mineral turpentine oil by 8 to 10% or water by 15 to 20% allowing to dry for 6 to 8 hours After applying acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45% or 65 to 70% by roller. (With prior approval of S.E.)

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases (NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 Kilogram / 15l). plaster crack should be filled by Acrylic base Crack seal / Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise on site technical reports from the concerned company technologist.

Providing waterproofing in W.C. and bath including brick bat coba in all position including providing and laying 12mm bedding in cement mortor 1:3 on vergin concrete slab with waterproofing compound @ 1kg/per bag of cement laying brick bat coba of required thickness in cm 1:5 with waterproofing compound 1 kg/bag of cement grouting and finishing the top layer with 20mm thick brick bedding in cm mortor 1:3 with waterproofing compound 1 kg/per bag of cement and testing the treated portion for 48 hours by pond test and covering ten years' guarantee on requisite stamp paper including curing etc. complete.

Providing waterproof plaster in W.C. and bath 20 mm thick for dado in cement mortar 1:3 with neat finishing, floating using waterproofing compound at the rate of 1 kg. per bag of cement of approved make and manufacturer and curing (and filling joints of Nahani trap and any outlet by properly) etc. complete.

Providing cement based waterproofing treatment to terraces (Indian water proofing or alike) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved waterproofing compound and laying the brick bats on bottom layer in C.M. 1:5 admixed with approved waterproofing compound filling upto half depth of brick bats, curing this layer for 3days, applying cement slurry over this layer joints of brick bats with C.M. 1:3 admixed with approved waterproofing compound and finally top finishing with average 20mm. thick layers of same mortar added with jute fiber at 1 Kilogram per bag including finishing the surface smooth with cement slurry admixed with approved waterproofing compound. Marking finished surface with false squares of 300 mm x 300 mm. making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper of Rs.500/- including ponding test etc. complete.

Providing and laying jointless Polydee-LM, a highly flexible elastometric coating for RCC / cementitious surface for terrace waterproofing on B.B. Coba / R.C.C, after application of TP-42 Primer on perfectly clean surface (free from loose dust and foreign matter) application of 1st coat of Polydee-LM @ 700 gms / One Square Metre and applying 2nd coat of Polydee-LM @ 700 gms / One Square Metre and finishing the same with sprinkling the AG-10 granules on the wet coating. (After finishing covering the treatment with 25 mm cement plaster for protection with fibrillated 6mm Plyplast fibre @ 125 gms / One Square Metre to be paid in separate item.) covering 7 years guarantee on Court Fee Stamp Paper of Rs. 100/- etc. complete.

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm of 8 to10 mm thicknes sand confirming to IS.15622 -2006 (GroupBla) of approved make, shade and pattern for flooring in required position laid on a bed of 1:4 cement mortar including neat cement float, filling joints, curing and cleaning etc. complete.

Providing and laying vitrified rustic matt stone finish tiles having size 590 mm to 605 mm x 590 mm to 605 mm to 8 to10mm thickness and confirming to IS.15622 -2006 (GroupBla) of approved make, shade and pattern for dado and skirting in required position fixed in 1:4 cement mortar including neat cement float, filling joints, curing and cleaning. etc. complete.

Providing and fixing machine cut mirror polished 18 mm to 20 mm thick telephone black granite / Amba White / Catbarybrown / RBI red / Ocean Brown granite stone partition with full moulding the edges etc. complete . Both side polish

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Catbary brown / RBI red / Ocean Brown granite stone for tread sand risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

Providing and laying telephone black /Amba White / Cadburybrown / Rubyred / Ocean Brown granite stone of 18 to 20 mm thick for door frame / dado / window boxing etc. On C.M. 1:6 including filling joints with polymer base filler no sing / moulding the sharp edges wherever necessary, curing, etc. complete.

Providing and fixing machine cut machine polished 18 mm to 20 mm thick telephone black / Amba White / Catbary brown / RBI red / Ocean Brown granite stone for tread sand risers of steps and staircases of approved colour and shade with full moulding and three grooved line for the treads on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing polishing and cleaning etc. complete.

Providing and fixing 40 mm diameter and 1.5 mm thick Stainless steel hand railing in S.S.304 Grade including fabricating, fixtures, errecting, necessary welding, grinding, finishing, buffing to stainless steel pipe etc. complete

Providing and fixing machine cut machine roughed 18 mm to 20 mm thick telephone black / Amba White / Catbary brown / RBI red / Ocean Brown granite stone for pathway flooring of approved colour and shades on bed of 1:4 Cement mortar including float filling joints with neat cement slurry curing and cleaning etc. complete.

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawings approved face veneers 3 mm thick on both faces or as directed, all necessary beads, mouldings and lipping, wrought iron hold fasts, chromium plated fixture sand fastenings, with brass mortise lock, chromium plated handles on both sides, and finishing with French Polish etc. complete.

Providing and fixing frame with / without ventilator of size as specified with Country cut teakwood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete

Providing and fixing CCTW beading of size 40 mm x 20 mm to the door frame including chamfering finishing with 3 coats of oil painting etc. complete

Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/Running metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram /Running metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilo gram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilo gram /Running metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram / Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box.Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two tracks with rectangular pipe having overall dimension 63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram/Running metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm at weight 0.695 Kilogram/Running metre. Top and side track section 61.85 x 31.75 x 1.30 mm at weight 0.659 Kilogram/Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/Running metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mm thick plain glass with all required screws and nuts etc, complete. With colour Anodising with box.

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete

Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram /One Square Metre as per drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting complete.

Providingand fixing mild steel grill gate with angle iron frame 65 mm x 65 mm x 10 mm with iron bars at 150 mm C/C and diagonal flats as per the detailed drawing including hinges, pivot block locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 Kilogram/Smt.

Providing and constructing Brick Masonry inspection trap Chamber 90cm x 45cm including 1:4:8 C.C foundation, 1:2:4 C.C.channels/half round glazed stoneware pipe channel, salt glazed stone-ware intercepting trap with rodding pipe set in 1:4:8 cement concrete block, brick masonry plastering inside and Outside, fixed in cement concrete with R.C.C. Cover medium duty 140 Kilogram. etc complete

Providing and fixing 15 cm x 10 cm salt glazed stone ware gully trap in cement concrete 1:4:8 outside the building including cast iron grating in the sink, connecting glazed stone ware pipe, brick masonry chamber with cast iron lid and cast iron grating for the gully trap.

Providing and laying for 150 mm dia salt glazed stone ware pipe including fittings Such as bends, tees, single junction, double junctions laying, jointing (including excavation and refilling the trenches) complete.

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

Providing and fixing orissa type colour glazed earthenware 625 x 450 mm. w.c. pan including trap, C.I. soil and vent pipe upto the outside face of wall including 100 mm. dia. C.I. plug, bend, 15 mm. thick 10 litre PVC flushing cistern with all necessary pipe connection etc. complete.

Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fitting sand flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall

Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 63 x 45 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete.

Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32 mm size of approved make includings oil pipe, vent pipe upto outside face of wall, 100 mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete.

Providing and fixing 15 mm dia. Screw down bib /stop tap of brass including necessary socket union nut complete.

Providing and fixing 450mm x 550mm size superior type Belgium mirror with 16mm dia. nickel plated towel rod etc. complete.

Providing and fixing orissa type colour glazed earthenware 625 x 450 mm. w.c. pan including trap, C.I. soil and vent pipe upto the outside face of wall including 100 mm. dia. C.I. plug, bend, 15 mm. thick 10 litre PVC flushing cistern with all necessary pipe connection etc. complete.

Providing and fixing White Glazed Earthenware full stall type Urinal with P.V.C. flushing cistern of 5 liters capacity with fitting, inlet pipes and stop tap, brackets for fixing the cistern, 32 mm dia. P.V.C flush pipe with fitting sand flushing arrangement including lead soil pipe, lead trap, soil pipe connectionup to the outside face of the wall

Providing and fixing White glazed with bottle trap earthenware Wash Hand Basin of 63 x 45 cm size including cold water piller taps, brackets, rubber plugs and brass chain, stop tap, chromium plate bottle trap and necessary pipe connections including UPAC waste pipe and trap upto the outside face of the wall, making good the damaged surface, testing etc. complete.

Providing and fixing European type wall-hung white water closet of approved make with push valve concealed type with cover plate 32 mm size of approved make includings oil pipe, vent pipe upto outside face of wall, 100 mm dia. G.I. plug bend inlet pipe all fittings, cuttingand making good walls, floors etc. complete.

Providing and fixing 15 mm dia. Screw down bib /stop tap of brass including necessary socket union nut complete.

Providing and fixing 20 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.

Providing and fixing 25 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.

Providing and fixing screw down 15 mm dia. Wheeled stop tap of brass including necessary sockets/union nut complete

Providing and fixing screw down for 20 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing screw down for 25 mm dia. Wheeled stop tap of brass including necessary sockets /union nut complete.

Providing and fixing screw down for 32 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing screw down for 40 mm dia. wheeled stop tap of brass including necessary sockets/union nut complete.

Providing and fixing screw down for 50 mm dia. Wheeled stop tap of brass including necessary sockets/ union nut complete.

Alluminium foldable ladder for store Providing & Fixing Foldable Alluminum Ladder 1500 mm. Ht.

Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet, outlet over flow pipe inclusive of all tanks capacity between 200 to 1000 liters

Providing and fixing push cock (Self closing tap) symet type of 15mm dia.including necessary socket, testing etc. complete.

Providing and fixing 10 cm PVC nahani trap with grating etc. complete.

Providing and fixing on walls/ ceiling/ floor 15 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ceiling/floor 20 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 25 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 32 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls /ceiling/ floor 40 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 50 mm dia. uPVC pipe with necessary fittings, remaking good the demolished portion etc. complete.

Providing and fixing 75 mm dia stabiliser pipe /P.V.C. soil vent /waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Providing and fixing 100 mm dia stabiliser pipe/ P.V.C. soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, clamps etc. complete

Providing and fixing P.V.C. Rain water pipes of 160mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to I.S. 13592-1992 including proper rainwater receiving recess with P.V.C. plug, bend, necessary fittings, such as, offsets, shoes, inluding fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm from face of wall a fixing with clips of approved quality and number ,filing the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonry blocks, including necessary scaffolding and maintenance for 3 yrs for any leakages or dislocations of pipes. All the P.V.C. fittings and additional 2 piece socket clips shall be got approved from engineer in charge etc. complete.

Providing and fixing 50mm diameter water meter with non-return valve including strainer,sockets/ union nut and including water meter box making locking arrangement and lock. [without chamber]

Providing and fixing chromium plated towel rod 16 mm dia and 75 cm. in length including all accessories complete.

Providing and fixing in position UPVC ultra violet stabilized 110 mm outer diameter cowl dome confirming to I.S.-4985 including making joints with solvent cement etc. complete

Providing and laying weep holes of 100 mm diameter PVC pipes as per drawing for abutment returns, return walls etc. Complete.

Providing and fixing 90 cm x 60 cm Granite plate engraving 10 cm. Height letter, figures including painting the lefters/figures with approved colour and shade complete

Providing cast in situ / ready mix M20 grade cement concrete for head walls of CD work / retaining walls etc. including necessary form work, compaction, finishing and curing etc. complete. (with reversible drum type mixer / concrete batch mix plant (pan mixer) with SCADA

Providing and laying of filter media with granular materials / stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of MoRTH specifications to a thickness of not less than 600 mm with smaller size to wards the soil and bigger size to wards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition as per drawing and technical specifications etc. complete.

Providing and fixing bituminous pad 25 mm thick for expansion joints in retaining wall, compound wall etc. complete.

Providing and laying Needle Punched and mechanically bonded non woven Geotextile of Type III indigenously manufactured from high quality Propylene staple fibers (continuous filament will not be accepted) on the prepared sub grade for Seperation. (For use this item SE / CE permission is obligatory.)

Providing and Constructing gabion structure 1 Meter high or required section made up of soft mechanically woven hexagonal shaped G.I. wire confirming to IS 16014:2012 having zinc plus PVC coating of over all diameter of 3.7 mm and tying lacing wire of 3.2 mm with edge wire confirming to overall diameter 4.4 mm edges being mechanically selvedge including placing in position, fitting neatly with trap stone rubble (15 to 23 cm) all loose ends to be securely tied (Excluding transportation) etc. complete.(InDryconditionandfor under water installation extra cost to be considered)

Providing dry rubble stone pitching 23 cm (about 9) thick including all material, quarry spalls, labour etc. complete.

Providing uncoursed rubble trap / quartzite / gneiss stone masonary in cement mortar 1:5 for piers, abutments, wings, returns, head-walls, parapet etc. including bailing out of water, striking joints of the non exposed faces, pointing the exposed faces with cement mortar 1:3, scaffolding, watering to masonary and etc. complete.

Transpotation of Excavated surplus material like soil, murum etc. upto lead of 20KM

Conveying debris beyond lid of 20KM

Providing & Fixing FRP Pargola (Size 8.1 mt X C 3.3 mt X 0.4 mt in wood Finish) with 4 Coloumns of size 2.8 mt X 0.45 mt X 0.45 mt) with necessary finishing work etc. complete

3D painting - Designing, Conceptualization & painting of 3D artistic on any surface at all height and location as directed. The paint should be used for the artistic painting is high quality acrylic paint. painting should be coated with weather proof warnish.

Providing and erecting chain link fencing 1.6 M. height with G.I. chain link of size 50 x 50 mm, 8 gauge thick and fixed 75 mm above ground level on vertical M.S. Angles of 40 x 40 x 6 mm size, includind excavating pits for foundation and embedded in C.C. block of 1:4:8 mix of size 450 x 450 x 670 mm. at 1.75 M. c/c with iron bar 16 mm dia as hold fast including welding link with angle frame at 30 cm c/c with nuts and bolts and horizontal M.S. Angles at top and bottom of 25 x 25 x 5 mm size and vertical M.S. flat 35 x 5 mm and 25 x 5 mm horizontal including cross support of 40 x 40 x 6 mm angles both side at every corner or bend embedded in concrete blocks of 1:4:8 of size 450 x 450 x 670 mm including 3 coats of oil painting etc. complete.

Designing, Providing & Installation of Wall mural related to freedom fighter, outside the jail wall as shown in the picture below . The material for this sculpture is Fibre/FRP . The Length of the mural should be minimum 15m with minimum height of 3 m, Size of the mural shall be in proportionate to the height of the sculpture. Thickness of FRP material should be 5-10mm. Including all cost of design, Making models (if any), making mural, inspection charges, Transportation, Fixing at site, Construction of Foundation in RCC- M20 Grade Concrete including Reinforcement(TMT/FE 500), Pedestal including all material required for fixing the mural, coating the pedestal with Coaltar Epoxy Coating, all Filling material upto the base of mural, polishing and painting of the mural, as directed by Engineer in Charge. (Variation in size off mural shall be +-10% in Length, Width and Height shall be permitted.) Inclusive all taxes Exclulding of GST .etc. Complete.

Providing an dfixing 90 cm x 60 cm Granite plate engraving 10 cm. Height letter, figures including painting the lefters/figures with approved colour and shade complete

Providing and fixing of retro-reflectorised informatory sign board rectangular / Square in shape having area greater than 0.9 One Square Meterr made out of 4 mm aluminum sheet bonded with white retro reflective sheet ing of Class__ (Type IV High inten sity micro-prismatic grade sheeting-HIP) having pressure sensitive / heat activated adhesive reto reflectives pecified back ground, border and back side retoreflctive symbols, letters, numerals, arrow as per IRC:67-2012 Table No 8.3, supported with back support frame 25 mm x 25 mm x 3mm, duly painted on back side with two coats of grey stove enamel paint and supported on two no. mild steel angle iron post 75 mm x 75 mm x 6 mm, 3.5 mt long firmly fixed to the ground by means of properly designed foundation with M 25 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing The angle iron post shall be duly painted with one coat of epoxy primer and two coats of epoxy finish paints having alternate black and white bands of 25 cm width including GI fixures and transportation etc. complete. The nut bolts of board with angle iron post / supporting structure after fixing at site has to be electrically welded. Class B (Type IV Highintensity micro-prismatic grade sheeting-HIP) sheeting shall have 7 years written warranty from the manufacturer and authorised distributor / convert or issued for field performance including the screen print edare a sand cut-out sheeting and cut-out durable transparent overlay film and this warranty certificate in original should be submitted to the Engineer in charge by the contractor/supplier.

Providing and fixing informatory sign boards in square or rectangular shape of any size for over head gantries or alike made out of 3 mm aluminum composite panel bonded with IRC Specified colour of retro reflective sheeting of Type XI Diamond Grade Sheeting (DG3) With ECF (Electronic Cutable Film) Lettring having pressure sensitive / heat activated adhesive, IRC Specified colour retro reflective cut out border & messages having pressure sensitive adhesive having border & messages in IRC Specified colour back ground including M.S. angle iron frame and bracing of size 35 mm X 35 mm X 5 mm and duly painted with flat oil paint including G.I. fixtures etc. and fixing the boards (The work to be executed with prior approval of Superintending Engineer.)

Providing detailed layout plan of area in scale1:500 including carrying out contour survey and detailed Engineering plane table Survey with the help of 24 Alidade .The dolomite area measurement of the plot and structures ,trees ,overhead line and underground service amenities with in the area, with triangular method and giving detailes of the structures, such as total area, type of building and distance from all corners taking trial pit 0.5 x 0.5 x 2.00 m.-2 Nos. per acre and collection of record from city survey / D.I.L.R. authorities and authentication.The plan shall be traced on 75 micron polyster film and shall be submitted along with three Amoniaprints. The contour levels shall be marked at 0.5 Meter intervals.Note:-The items includes-1)Traversingworkwiththeodoliteandsteeltape .2)LevellingGridWorkoftheterrain. 3)DetailedEngineeringSurveyandcontouringworkoftheterrain. 4)Plottingwork. 5)Collection of Record. a)upto1Acre

BASIC TEST OF CEMENT Standard Consistancy, Fineness, Specific Gravity, Setting Time ( Initial & Final ), Compressive Strength, Soundness.

BASIC TEST OF AGGREGATE. - a) Water Absorption, Specific Gravity,Impact Value, Crushing Value.

BASIC TEST OF AGGREGATE. - b) Sieve Analysis.

BASIC TEST OF AGGREGATE. - c) Abrasion Value.

BASIC TEST OF AGGREGATE. - d) Flakiness Index & Elongation Index.

BASIC TEST OF AGGREGATE. - e) Stripping Value. (for Bituminous Work)

BASIC TEST OF AGGREGATE. - f) Soundness

FINE AGGREGATE. - a) Fineness Modulus ( Sieve Analysis ),Silt & Clay Content

FINE AGGREGATE. - b) Chloride & Sulphate Content.

FINE AGGREGATE. - c) Silt Factor.

CONCRETE - a) Compressive Strength OF C.C. Cube (Set of 3 cubes)

CONCRETE - b) Concrete mix design by Accelerated curing method. (By Accelerated curing method)

WATER PH Value, Sulphate & Chloride Content.

STEEL BAR TESTING - a) Upto 16 mm (Set of 3 Bars)

STEEL BAR TESTING - b) Above 16 mm (Set of 3 Bars) (Tensile strength, %, Elongation, Yield Stress,Weight-Per Meter, Bend / Rebend Test, Proof Stress.)

SOIL / MURUM Plate Load Bearing Test.(Excluding Transportation)

Excavation for foundation in earth, soil of all types, sand, grave lands of murum, including removing the excavated material upto adistance of 50m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming, watering including shoring and strutting etc.complete.(Liftupto 1.5 m.) By Mechanical Means

GARDEN SOIL :- Supplying on site garden soil well sieved 90% to pass through I.S. sieve of 10mm size Free from stones rubbish like dried grass roots and other such materials.The soil should be fresh be measured by measuring box (Farma) Item includes royalty charges, octroi, corporation Tax Transporting, loading – unloading etc

Farm yard manure :- Supplying on site well decayed, well dried, well powedered, withought clods and free from stones, dried grass and other rubbish material,. The colour of the manure generally be black. the manure will be measuring by measure box. (farma) item includes Transporting, loading -unloading etc (lead charges per 40km. are considered.

Preparing Instant Lawn : Excavating the ground to a required depth of 30cms removing & conveying unwanted stuff to a required distance as directed. filling fresh garden soil / silt & manure in excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil and manure thoroughly will levelling, watering on previous night. Planting required variety of lawn grass as directed and maintaining till well established by watering weeding clopping rolling etc. complete

Preparing Shrubbery :- Excavating the round to required depth of 30cms, removing and conveying unwanted stuff to a required excavated area in 3:1 proportion to a height of 30cms. Mixing garden soil & manure toughly well, leveling , watering on previous As derected by Engineer-Incharge.

Planting large flowering / shady trees :- Digging pit with size 0.9m x 0.9m x 0.9m removing and conveying unwanted stuff to a required distance as directed. Filling the pit with approved excavated material upto a height of 0.30m and remaining height of 0.60m with fresh garden soil & manure in 3:1 proportion Mixing soil & manure thoroughly well. leveling as directed, watering previous night, planting on to two year old healthy trees sapling as per specifications. Maintaining till well established by watering weeding, stirring of soil replacing of casualties etc. complete.

Annual Maintainance for Garden beside Kasarwadavli Lake 1st Year

Annual Maintainance for Garden beside Kasarwadavli Lake 2nd Year

Annual Maintainance for Garden beside Kasarwadavli Lake 3rd Year

Annual Maintainance for Garden beside Kasarwadavli Lake 4th Year

Supply & installation of Video Projector complete with requisite lens for multimedia show. 20000 lumens. High aperature, Full HD WUXGA (1920 x 1200) resolution with 4k enhancement to produce ultra-bright images up to 20000 hours of virtually maintenance free operation. Long throw zoom lens WUXGA 5.27 to 7.41 throw ratio lens shift vertical -60 percent to +60 percent Horizontal -18 percent to +18 percent. Make : Panasonic / Epson

Supply & fixing of Centre Jet with maximum height of 15 Meters with provision for 'slow' rise and fall. Orifice : 25 MM, Material of Construction : Brass Make : Premierworld or equivalent

Supply & fixing of Chasing Jets in linear array with maximum height of 13 Meters Material of Construction : Brass Make : Premierworld or equivalent

Supply & fixing of Chasing Jets in circular array with maximum height of 13 Meters Material of Construction : Brass Make : Premierworld or equivalent

Supply & fixing of Arch Jets with maximum height of 08 Meters, Orifice dia. : 16 MM Material of Construction : Brass Make : Premierworld or equivalent

Supply & fixing of single oscillating Jets with maximum height of 08 Meters Material of Construction : Brass Make : Premierworld

Supply & fixing of Auxilory Jets with maximum height of 10 Meters, Orifice dia 16 MM Material of Construction : Brass Make : Premierworld or equivalent or equivalent

Supply & fixing Peacock Tail, a cluster of 11 Jets with maximum height of 05 Meters Material of Construction : Brass Make : Premierworld or equivalent

Supply & fixing of Vario Jets with maximum height of 09 Meters DN50 Material of Construction : Stainless Steel Make : Premierworld or equivalent

Supply & fixing of 2 D MDN with maximum jet height of 10 Meters. Orifice dia. : 14 MM Make : Premierworld or equivalent

Supply & fixing of Sunburst Jet formed by 15 nozzles of Orifice dia. : 6.4 MM on Bronze header with maximum jet height of 06 Meters. Make : Premierworld or equivalent

Supply & fixing of Centre fed Water Screen of size 09 M x 27 M in Bronze and Stainless Steel construction. Make : Premierworld or equivalent

Supply & fixing of Water Flower, a cluster of 09 Jets with maximum height of 07 Meters, Orifice dia : 8 MM Material of Construction : Brass Make : Premierworld or equivalent

Supply & installation of 25 HP borewell submersible pump with wide area suction strainer, with Stainless Steel mesh cover. Make : Texmo / KSB

Supply & installation of 5 HP mono submersible pump with wide area suction strainer with Stainless Steel mesh cover. Make : Kirloskar / Texmo / KSB

Supply & installation of 3 HP mono submersible pump with wide area suction strainer with Stainless Steel mesh cover. Make : Kirloskar / Texmo / KSB

Supply & installation of 2 HP mono submersible pump with wide area suction strainer with Stainless Steel mesh cover. Make : Kirloskar / Texmo / KSB

Supply & installation of Base frame structure for 5 HP mono submersible pump with necessary HDPR floats

Supply & installation of Base frame structure for 3 HP & 2 HP mono submersible pumps with necessary HDPR floats

Supply & installation of Gate valves with requisite fittings 25 MM. Material of construction : Gun Metal. Make : HM / Vijay

Supply & installation of Gate valves with requisite fittings 32 MM. Material of construction : Gun Metal. Make : HM / Vijay

Supply & installation of Gate valves with requisite fittings 40 MM. Material of construction : Gun Metal. Make : HM / Vijay

Supply & installation of Gate valves with requisite fittings 50 MM. Material of construction : Gun Metal. Make : HM / Vijay

Supply & installation of Check valves with requisite fittings. Material of construction : C.I. Make : Leader / L&T / Zoloto / Audco

Supply & fixing of Galvanised header 65 NB x 3 Meters long with four outlets

Supply & fixing of Galvanised Manifold with necessary HDPE Floats

Supply & installation of Aluminium Ring of diameter 14.5 Meters

Supply & installation of Galvanised structural frame for water screen with necessary HDPE floats

Supply & installation of weatherproof enclosure of FRP or equivalent material for Projector & Lasers. The enclosure of appropriate size for Projector and Laser shall be installed inside lake on floating platform at desired distance from main platform. All the joints of enclosure shall be properly sealed. The enclosure shall be provided with lockable opening. The floating platform shall be firmly anchored with the help of steel ropes and anchoring weights (concrete blocks) to maintain desired distance.

Supply & installation of GI floating frame with HDPE (High Density Polyehylene) floats. Interlocking cubes shall be modular in construction and can be interlocked to form a floating / fixed with water depth flexibility structure. Floats shall be maintenance free, durable and environment friendly.

Supply & providing structural linkages with additional floats to interconnect all floating apparatuses. These shall be linked together with the help of flexible structural linkages. The linkages shall be connected by hinged joints of different sizes / types as per requirement (for 98 meter span)

Supply & fixing anchoring material like Steel wire rope and concrete blocks. The rope shall be GI shipping wire rope, 8 mm dia. Steel core (IWRC). The rectangular cement concrete blocks of required weight shall be casted uniformly with Steel rope holding arrangement in the center. Concrete block shall be at water body base. Length of wire rope shall be 1.5 times the maximum depth of water and inbetween appropriate counter weight shall be provided. The arrangement shall be such that it will be floating properly without movement irrespective of water level. (for 98 meter span)

Supply & fixing 300 MM wide perforated GI cable tray with floating structure and HDPE floats. The suitable sizes GI pipes shall be provided for grouting in lake. The frame shall be fabricated from suitable size angles. The jointing of individual member of tray shall be done with flats. The floating GI tray shall be connected to firm support with hinged joints. (for 98 meter span)

Supply & installation of 1.5 HP mono submersible pump with wide area suction strainer. Make : Kirloskar / Texmo / KSB

Supply & providing structural linkages for 40 to 65 meter span with additional floats to interconnect all floating apparatuses. These shall be linked together with the help of flexible structural linkages. The linkages shall be connected by hinged joints of different sizes / types as per requirement

Supply & fixing anchoring material like Steel wire rope and concrete blocks. The rope shall be GI shipping wire rope, 8 mm dia. Steel core (IWRC). The rectangular cement concrete blocks of required weight shall be casted uniformly with Steel rope holding arrangement in the center. Concrete block shall be at water body base. Length of wire rope shall be 1.5 times the maximum depth of water and inbetween appropriate counter weight shall be provided. The arrangement shall be such that it will be floating properly without movement irrespective of water level.(for 63 meter span)

Supply & fixing 300 MM wide perforated GI cable tray with floating structure and HDPE floats. The suitable sizes GI pipes shall be provided for grouting in lake. The frame shall be fabricated from suitable size angles. The jointing of individual member of tray shall be done with flats. The floating GI tray shall be connected to firm support with hinged joints. (for 63 meter span)

Supply & fixing anchoring material like Steel wire rope and concrete blocks. The rope shall be GI shipping wire rope, 8 mm dia. Steel core (IWRC). The rectangular cement concrete blocks of required weight shall be casted uniformly with Steel rope holding arrangement in the center. Concrete block shall be at water body base. Length of wire rope shall be 1.5 times the maximum depth of water and inbetween appropriate counter weight shall be provided. The arrangement shall be such that it will be floating properly without movement irrespective of water level.(for 47 meter span)

Supply & fixing 300 MM wide perforated GI cable tray with floating structure and HDPE floats. The suitable sizes GI pipes shall be provided for grouting in lake. The frame shall be fabricated from suitable size angles. The jointing of individual member of tray shall be done with flats. The floating GI tray shall be connected to firm support with hinged joints. (for 47 meter span)

Supply & fixing of LED Lights (RGB) - 54 Watts, 24 Volts with IP 68 protection in Polymer construction. LED waterproof luminairs with array of high output of LEDs housed in compact enclosure. Provided with toughened Glass with Elastomeris seal. Special Plastic cable gland compact socket head fasteners and mounting bracket all shall be of Stainless Steel.

Supply & fixing of Laser (RGB), 5 Watt (WHITE) with Pangolin Beyond Essential FB4. With 60 Kbps scanner and 60 degree angle, in compact case with forced air cooling.

Supply & fixing of Laser (RGB), 5 Watt with Pangolin Beyond Essential FB4. With 60 Kbps scanner and 60 degree angle, in compact case with forced air cooling.

Supply & fixing of Solenoid valves for underwater applicationwith 24 Volts coil. Material of construction : Stainless Steel.

Supply & providing Variable Frequency Drive 7.5 HP. Make : Lenze / ABB / Delta / Fuji

Supply & providing Variable Frequency Drive 5 HP. Make : Lenze / ABB / Delta / Fuji

Supply & laying of flat cable 3 Core x 10sq.mm. underground as well as submerged. The underground cables shall be laid through appropriate sizes conduit pipes provided with cc bedding underneath. Submerged cables shall be laid on Cable tray with proper clamping arrangemenrt. The cables one class / type shall be grouped and tagged with description properly at specified distance.

Supply & laying of flat cable 3 Core x 6 sq.mm. underground as well as submerged. The underground cables shall be laid through appropriate sizes conduit pipes provided with cc bedding underneath. Submerged cables shall be laid on Cable tray with proper clamping arrangemenrt. The cables one class / type shall be grouped and tagged with description properly at specified distance.

Supply & laying of flat cable 3 Core x 2.5 sq.mm. underground as well as submerged. The underground cables shall be laid through appropriate sizes conduit pipes provided with cc bedding underneath. Submerged cables shall be laid on Cable tray with proper clamping arrangemenrt. The cables one class / type shall be grouped and tagged with description properly at specified distance.

Supply & laying of flexible cable 2 Core x 1.5 sq.mm.underground as well as submerged. The underground cables shall be laid through appropriate sizes conduit pipes provided with cc bedding underneath. Submerged cables shall be laid on Cable tray with proper clamping arrangemenrt. The cables one class / type shall be grouped and tagged with description properly at specified distance.

Supply & laying of flexible cable 4 Core x 1.5 sq.mm. underground as well as submerged. The underground cables shall be laid through appropriate sizes conduit pipes provided with cc bedding underneath. Submerged cables shall be laid on Cable tray with proper clamping arrangemenrt. The cables one class / type shall be grouped and tagged with description properly at specified distance.

Supply & laying of Power cable for 2D Swing jet

Supply & laying of Sensor cable for 2D Swing jet

Supply & fixing of Earth Electrodes with Copper flat and Copper wire, lightening arrester

Supply & fixing of PVC Conduit pipes of suitable sizes underground as well as submerged.

Supply & fixing All Weather Compact 2-way coaxial loud speaker complete with protective weatherproof covering with 12” LF, Long Term sys power rating: 400 watt (1600 W peak), 2 hrs, 250 watt (1000 W peak) 100 hrs, Max SPL – 122 dB, Frequency Range 55Hz – 20 kHz, AWC 129 (JBL) / equivalent

Supply & fixing of Dual 15" High power subwoofer system complete with weatherproof protective covering with power rating 1000 w continuous at 4 ohm. Make: JBL PD525S / equivalent

SITC Digital Signal Processor : 12 x 8 signal processor with BLU Link. 12 Analogue inputs (with 48 V Pahntom Power per channel) x 8 Analogue outputs. Configurable signal processing, 48 channels, low latency, fault tolerant digital Audio Bus. Make JBL / equivalent

SITC of Power Amplifier : 4 CH Class D Amplifier. Frequency band : 10 Hz to 22 Khz. With over current protection, DC offset protection. Make CROWN / equivalent

Audio Rack : It shall be rigid with absorber layer between the connection points to decrease the ascillational energy on each floor. Make: PWTL / equivalent

Audio Cable : Type : Optical cable or similar. Gauge : 2.5 sq.mm. Connector type : XT30 Ipx Gold plated

Supply & installation of Computer intel core i7 Brand : Dell or similar, RAM 16 GB DDR4 Storage 240 GB SSD Graphic card RTX 3060, Windows 11, 24" Monitor with 500 VA UPS

Supply & installation of 10 KVA Online UPS complete with mounting arrangement. Make : APC / Microtek / Equivalent

Supply & installation of 6 KVA Online UPS complete with mounting arrangement. Make : APC / Microtek / Equivalent

Providing licensed Sunlite Suite 2 software for lifetime validity to run the complete show.

Fountain programming including integration of water effects, lights, laser graphics etc. with music of 30 Minutes duration. All the software shall be locally programmable in order to change the musical content of the musical fountain periodically. Licence and program keys will be owned by TMC and same shall not be made available to anyone..

Customised theme show with development of Show Content for duration of 25-30 Minutes. The theme will be given by Corporation and based on the same complete musical show shall be produced. The entire program shall be customised. The same can be modified on special occasions. Once the entire show is prepared the same shall be got approved from concerned competent authority

Provision of 2 - Seater FRP Paddle Boat.

Second Year Comprehensive maintenance of all electrical works

Third Year Comprehensive maintenance of all electrical works

Fourth Year Comprehensive maintenance of all electrical works

Fifth Year Comprehensive maintenance of all electrical works

Second Year Comprehensive maintenance of all electrical works

Third Year Comprehensive maintenance of all electrical works

Fourth Year Comprehensive maintenance of all electrical works

Fifth Year Comprehensive maintenance of all electrical works

Second Year Comprehensive maintenance of all electrical works

Third Year Comprehensive maintenance of all electrical works

Fourth Year Comprehensive maintenance of all electrical works

Fifth Year Comprehensive maintenance of all electrical works

Operation of fountain for 5 years with one skilled technician, one unskilled technician along with one Helper

Operation of fountain for 5 years with one skilled technician along with one Helper

Supply,Erection,Testing and Commissioning of Garden speakerwith frequency response: 85 Hz to 20 KHz +/-5 db, sensitivity- 89 db//w/m power handling: 30w RMS, Impedance: 8 ohms, nominal.Drivers: glass filled Polycroplene basket 6.5" Polypropylene woofer, Polycone 1" Tweeter, weather handling: 38 degree C to 60 degree C, Body material: Lexan Polycorbonate Plastic, Coverage pattern: 360 degree Omni directional, similar to garden speak 50 of Ahuja Audio or its equivalents.

Supply,Erection,Testing and Commissioning of Professional Amlpifier Equivalents to SPA-15000 Ahuja make 1500 watts high power PA Amplifier.

Supplying and erecting Junction box for speaker

S & E Loud Speaker cable 4 Core 2.5 sqmm copper multistrand conductor shielded HiFi application cable conduit system

Supplying and erecting professional Ahuja fmx106dp with usb and bluetooth aux in mic in

Supplying & Erecting SS Rack Enclousure for music System

Providing earthing with Galvanized cast iron earth plate size 60 x 60 x 0.6 cm complete with all materials, testing & recording the results as per specification No. EA-EP

Supply, installation, testing & commissioning of 4MP IP Dome/Bullet Camera with 1/2.8", progressive scan, CMOS ,2.8/4/6mm lens@ F1.8, ,angle of view more than 82° ,Illumination Colour: 0.02 Lux (F1.8), 0.0Lux with IR ,Day/Night with auto switch ICR, , supported H.264,MJPEG video compression , Smart function supported ( motion , IP67,CE, ROHS.

Supplying, installation, testing and commissioning of 4.0 MP full HD video resolution 2560x 1440, 25 fps True D/N IR Bullet / Box camera, 2.8-12 mm motorised lens, Auto Back Focus, High Light compensation, 120 dB and above True WDR, audio capture capability, 3 streams, H.264/H.265, ONVIF compliant, SD card Slot, with IP67 housing with accessories such as mounting brackets/structures fixtures etc. necessary to mount the camera on pole, etc. Video coding H.264 / H.265, Certification from EN, &CE,FCC.

Supply Installation Testing & commissioning Of Network Video Recorder 32 channel input,Support HDMI Provision for 4 SATA HDDs, Up to 8TB for each HDD, HDMI/VGA Output, Recording Resolution, 6MP/5MP/4MP/3MP/1080p/960p/ 720p/D1/2CIF/ CIF, Compression H.265/H.264.

Supply , Installation, Testing & Commissioning of UTP Connector (RJ-45) as per specification No. WG-AS/UTPC.

Supply Installation Testing & commissioning of 8000 GB Hard Disk for video Surveillance Equivalent to:- Western Digital./Seagate

Supplying, fixing, and configuring 8-ports Managed Gigabit Switches Layer-2, 10/100/1000 Base-T PoE Smart Switch plus 2 SFP only (New).

Supply Installation Testing & commissioning of 32" LED TV Monitor Equivalent to:- LG/Samsung

SITC of pole mounted type Outdoor junction Box along with pole mounting accessories, and for equipment mounting suitable for accomodating ,Electrical switch unit, UPS, Media Converter and POE switch, as directed by Engineer In Charge.

Supplying and fixing 6U Wall Mount Rack (Dimension-DxWXH - 450X550X367 mm) as per specification in approved manner

SFP Module For Optic Fibre Connectivity

SITC of 600 VA UPS for backup during power failure.

Supplying & installing UTP networking cat-6 armoured cable suitable for LAN / WAN Computer net-working as per specification No. WG-COC/NC

Supplying & installing single mode OS1/OS2 - armoured – 6 core OS1/OS2 armoured single mode optical fibre of size 50/125µm. 10/40 gbps speed in provided underground HDPE pipe complete.

Supplying and erecting ISI mark G.I. pipe pole ‘B’ grade 80 mm dia 6 m long with pole cap, base plate in provided foundation as per specification no. OH-PL/GIP

Providing PU paint to G.I./octagonal poles as required of desired colour duly finished in an approved manner for 6 mtr long pole including Bracket

Making cement concrete foundation including excavation ( 45 x 45 x 120 ) cm deep in 1:3:6 cement concrete, 20 to 25 mm stone metal, (45 x 45 x 45) cm / 45 cm dia. x 45 cm height plinth duly plastered, with necessary curing and finishing complete. (for 6 m pole)

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by

Providing and maintaining temporary 1 KVA on line UPS pure sine wave suitable for 30 minutes battery backup to provided computer with necessary interconnecting cabling, wiring etc for three days.

DISCOM MSEB/TORRENT Charges for Lights/Sound/CCTV

SITC of 3.5 mtr long GI pole with double Decorative bracket arm. The pole shall have flush door & locking arrangement at the bottom of pole. The pole door shall be attached to the pole with rope wire . The pole shall be made out of bottom pipe of 139.7 mm dia and 4 mm thick with base plate . Top section of 76.1 mm dia having thickness 3 mm The pole shall be provided with decorative Aluminium/CI embellishments to add aesthetics to the pole .The bracket is of 48.3 mm dia. and having decorative design as per drawing attached. The body of decorative pole shall be machined and polished properly to give it a smooth surface. The double arm bracket shall have a span of 800 mm with design in the middle made of 8mm rod with flower and leaf design with arrangement for placing fixture in post top position. The pole shall be made of galvanized iron pipe and base plate of 250 x 250 with 10 mm thickness. The pole shall be painted with PU paint with one coat of etch primer , one coat of zinc phosphate primer with a thickness of 60 microns. Color : Matt black and Gold.The decorative pole shall be duly pre treated and painted in U V ray resistant PU coating in approved colour shade with provision of terminiation box in the base compartment complete in all respect. The shape and the final design shall be got approved from engineer in charge

SITC of 3.5 mtr hot dipped galvnised and PU painted Cartoon Character Pole with 1 mtr bottom made up of 139 mm OD GI pipe and 2.5 mtr top made up of 76 OD GI pipe. Baseplate shall be minimum 250 x 250 x 10 mm in size and hot dipped galvanised. Entire pole shall be painted with desired color shade of MRF make PU paint after etch and gray primer coats. (This price does not include any lights, Camera, Speaker or electrical components.)

SITC of 3 mtr hot dipped galvnised and PU painted petal pole made up of 139 mm OD GI pipe for trunk and 48 OD GI pipe for branches. Petal shall be made up of FRP/GI metal sheet. Baseplate shall be minimum 250 x 250 x 16 mm in size and hot dipped galvanised. Entire pole shall be painted with desired color shade of MRF make PU paint after etch and gray primer coats. The Pole shall be with 40W indirect LED fitting with IP65 . Proper Heat dessipation shall be made as per specifications.

Providing & erecting 7 m high galvanised octagonal pole with bottom of 130 mm A/F, top 70 mm A/F on provided foundation as per specification no. OH-PL/PSC

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity as 10 T/sq.m at 1.5 m depth including supply of steel, concrete,excavation, fixing provided nut bolts with the help of template, duly plastered as per design complete (for 3 to 5m octagonal / conical GI pole).

Making M- 20 grade reinforced cement concrete foundation by considering the safe soil bearing capacity at site as 10 T/sq.m at 1.5 m depth including supply of steel,concrete, excavation and fixing provided nut bolts with the help of template, duly plastered as per design complete (for 6m to 8m high octagonal /conical GI pole).

Supplying and erecting pipe type earthing with 40mm. dia. G.l. pipe or 20 mm dia. G.l. strip complete with all materials as per specification no. EA-EP

Supply of decorative luminaire made of spun aluminium body with pressure die-cast heat management (PDCHM) and the IP65 optical compartment with high power LED/s is comprised of a deep drawn chemically polished and co-extruded, thermofrmed ploycarbonate protector stabilized agent UV rays suitable for 40W LED. Fitting should be post top mounting type decorative fixture. fitting should have decorative elements to be placed on top of the ficture for asthetic purpose. Fitting should have inbuilt driver with efficiency >0.9 and having surge protection device of 4KVA and external surge protection device of 10KVA, colour temperature 3000K / 4000K / 5700K Natural day light LED.LED's to be of Osram / Cree / Bridgelux & driver to be of make Philips / fulham / Osram.

SITC of Decorative hanging type LED decorative light fitting made of Alum Die Cast – 60W/70W, with pressure die-cast heat management (PDCHM) and the IP65 optical compartment with high power LED/s , colour temp shall be 4000k with permissible tolerance .Fitting should have inbuilt driver with efficiency >0.9 and having surge protection device of 4KVA and external surge protection device of 10KVA, colour temperature 3000K / 4000K / 5700K Natural day light LED.LED's to be of Osram / Cree / Bridgelux & driver to be of make Philips / fulham / Osram.

Supply Installation Testing & commissioning of integral high pressure Die cast/extruded aluminium LED Floodlight luminaire with proper heat dessipation & toughned glass protector or with yellowing injection molded polycarbonate cover having high light transmission index.The LEDs are provided with suitable lens for dispersal for achieving street light optics to ensure uniform light distribution.The LED fixture shall be desighned for at least L70 life of minimum 50,000 burning hours at ambient tempreture not less than 35*C. the system wattage (fixture's total power consumption) should be be 120W. Details as per technical specification attached.

Supplying and erecting Recess mounted 30W LED wall washers, tilted 70° outwards and swivels 360° to offer best illumination on the wall with any colour with driver complete. ( Including Compatible Driver)

Providing and erecting 36W Mono colour Façade lighting with IP66 rating with beam angel variation possibility as directed by engineer incharge,equivalent to Leksa, Bajaj, Philips, Crompton

Supply and erection of Hot dip galvanized Ring for installation of mini high mast suitable for 4 Nos of LED Flood lights. The outer dia of ring shall be 600 mm. The ring shall be of 50 mm dia B class pipe with three supports to Sleeve, the sleeve shall be of 500 mm length and 4 mm thick duly provision of 4 nos bols and shall be suitable to fit on Octagonal pole of 70 mm AF

Supplying and erecting LED flexible strip light 5m length upto 25W conforming IP 65 of any colour with driver complete.

Supplying & erecting mains with 3x2.5 Sq.mm F.R stranded/solid copper PVC insulated wire laid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG- MA/BW

Providing PU paint to octagonal poles as required of desired colour duly finished in an approved manner for 7 mtr long pole

Providing PU paint / Powder coating as required of desired colour duly finished in an approved manner for 600 mm dia. Mini highmast ring

Supplying and erecting regular/ standard model ceiling fan of 1200mm. sweep complete erected in position as per specification.

Supplying and erecting modular type electronic step regulator two module ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire.

Supplying & erecting 10-12W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting fresh air cum exhaust fan light duty 250 V, A.C. 50 cycles225 mm. 1400 RPM rust proof body & blades,wire mesh duly erected in approved manner

Supplying & erecting LED 20W tube light fitting (4 feet) with battern type, heat sink, integrated HF electronic driver complete.

Supplying, erecting & terminating XLPE armoured cable 4 core 25 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/ trusses/pole or laid in provided trench/ pipe as per specification no. CB LT/AL

Supply, Installation, Testing and commissioning of maintenance free earthing comprising of Electrode of 17.2 mm diameter Low Carbon Steel with 250 micron molecular copper bonded earthing rod of Length 3m along with 25 kg Carbon based environment friendly back fill ground enhancing compound required to fill up the excavated earth with required quantity complete. Specification no.EA-MOBI

Supplying and erecting GI strip of required size used for earthing on wall and/or any other purpose with necessary GI clamps fixed on wall painted with insulating and non-corrosive bond in an approved manner with required joints As per specification no. EAEP.

Supplying and erecting iron, sheet metal work consisting of CRCA sheets, various sections of iron, plates, chequered plates, rods, bars, MS pipes, etc. for panel board or any other purpose with bending, cutting, drilling and welding complete erected at the position with necessary materials duly painted with one coat of red oxide and two coats of enamel paint to match the switchgears or as per directions by the authority.

Supplying and erecting modular type switch 6A / 10A ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type switch 16A ISI mark approved make duly erected on provided plate and box with wiring connections complete

Supplying and erecting modular type 3 pin 6A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting modular type 3 pin 16A multi socket with safety shutter ISI mark approved make duly erected on provided plate and box with wiring connections complete.

Supplying and erecting PVC Surface modular double mounting plate 6 module complete duly erected in an approved manner

Supplying and erecting PVC Surface modular double mounting plate 8 module complete duly erected in an approved manner

Point wiring in PVC trunking (casing-capping) with 1.5 sq.mm (2+1E) FR grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Point wiring for independent plug in PVC trunking (casing capping) with 1.5 sq.mm (2+1E ) FR grade copper wire, modular type switch, earthing and required accessories as per specification No: WG-PW/SW

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SWSWR/MCB

Supplying, erecting & marking DPMCB 6 Amp to 32 Amp in provided distribution board as per specification no. SW- SWR/MCB

S/E CRCA sheet metal one way enclosure suitable for DPMCB / TPMCB /FPMCB complete erected on angle iron frame .

Supplying & erecting mains with 3x4 sq.mm F.R copper PVC insulated wirelaid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying, erecting & terminating XLPE armoured cable 4 core 10 sq. mm. aluminium conductor with continuous 5.48 sq. mm. (12 SWG) G.I. earth wire complete erected with glands & lugs, on wall/trusses/pole or laid in provided trench/ pipe as per specification no.CB-LT/AL

Supplying and laying (including excavation) 50 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete.

Providing M20 concrete for resurfacing the road.

Supplying, erecting & marking SPMCB 0.5A to 5A in provided distribution board as per specification no.CB-SB

Supplying, erecting & marking SPMCB 6A to 32A, B- series (for lighting) in provided distribution board as per specification No. SWSWR/MCB

Supplying, erecting & marking SPMCB 40A to 63A, B- series (for lighting) in provided distribution board as per specification No. SWSWR/MCB

Supplying and erecting bakelite sheet 6 mm thick fixed to wall or on provided panel board with necessary materials such as screws, wall fasteners supports, nuts bolts etc. complete.

Supplying and erecting enamel iron G.I. sheet 1.6mm (16 gauge) caution board of size 200 x150 mm. as per I.S. 2551 of 1982 in Marathi and Hindi erected at position for medium installation.

Supplying & erecting mains with 2x10 sq.mm F.R copper PVC insulated wirelaid in provided conduit/trunking/inside pole/Bus bars or any other places as per specification No: WG-MA/BW

Supplying & erecting Single Pole Bakellite 35 Sqmm connector for connecting wire from MCB to cable

MCB/RCCB Channel Support patti

Supplying & erecting approved make 415V 63A porcelain base neutral link complete erected in provided M.S. box.

Supplying and erecting metal work in CRCA sheet including Iron work for supports with fabrication of boxes, panel boards, etc. including cutting, bending, drilling, welding, riveting, treated with anti-rust treatment and duly powder coated or painted with one coat of red lead paint and 2 coats of enamel paint complete

Providing cement concrete for foundation or for concrete filling in 1:3:6 ratio with 20 to 25 mm. stone metal duly plastered with necessary curing for pole muffing or any other purposes.

Supplying and erecting 4 pole power contactor 440V 40A for time switch complete erected on wooden block/provided box, with necessary materials.

Supplying & erecting crimping type copper lugs for cable upto 16 sq mmcomplete as per specification No. CB-L/CU

SITC of nature switch infrared for making ON/OFF street light as sun set and sun rise. The nature switch shall be housed in FRP casing with protection of MCB opening voltage 150V to 300V 30-60 Hz

Supplying and erecting bulkhead fitting suitable for upto LED upto 12W fixed on wall. As per specification no.FG-IDF/BHF

Supplying & erecting 5 - 7 W, 230V integral type LED Lamp suitable for B-22/E-27 base.

Supplying and erecting PVC trunking (PVC casing-n capping) of size 25 mm with accessories on wall/ceiling as per specification No: WG-MA/CON.

Supplying and erecting HMS PVC conduit 25 mm dia. with PVC accessories on wall /ceiling as per specification No: WG-MA/CON.

Supplying and fixing wiremesh (Jali) cover suitable for fitting / fan or for any purpose ,complete with necessary materials. The Jali cover shall be made from good quality G.I. wire mesh size 25 mm x 25 mm and made up of 14 SWG G.I. wire with side / supporting MS strips of suitable size.

M/s. Shayona Corporation