Estimate for renovation of Head Office Building 1st and 3rd floor, Sector 17E, Chandigarh

Amount

Dismantling brick work

Dismantling RCC work

Dismantling cement conglomerate floors 25 mm to 50 mm thick including concrete base.

Removing Doors and Windows (Steel and wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. (a) Doors of area 3 sqm and below

Dismantling asbestos cement celotax or other hard board ceiling or partition walls including supporting timber

Scraping Bricks dismantled from brick work in lime or cement

Cement concrete 1:2:4 mixing by manual means

Centering and Shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels

Cold twistd deformed (ribbed/Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete.

1st class burnt brick laid in csm 1:4 in first story upto 4 mtr above plinth level.

12.5 mm thick Cement plaster 1:4

Chowkats of commercial hard wood such as Hollock confirming to ISI specifications no 1003 m Kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position. Single Rebate (60 mm X100 mm).

Kail wood wroght planed and fixed in position

Providing and fixing ply wood, plain lining, butt jointed including PVC Plug placed at 45 cm to 65 cm centers complete with necessary nails (Frame work shall be payable extra ) (f) 9 mm thick

Providing and Fixing decorative high pressure laminated sheet 1 mm SF thick with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S, including cost of adhesive of approved quality

Providing and Fixing glass panes with nails and putty or wooden strip complete in all respect 12 mm thick Toughend glass

Providing and Fixing glass panes with nails and putty or wooden strip complete in all respect 8 mm thick Toughend glass

Providing and fixing Frost film on glass

Factory manufactured solid flush door fixed in position iron hinges, etc ( excluding the cost of any fittings other than specified above but including labour for fixing the same in position (a) Commercial with elm or gurjan facing on both sides with laminated core and lipped edges. (iii) 30 mm thick. Code IS 2202-1(1999)

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete I.S.I Designation No. III (size of door 851 mm to 1000mm )

Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality).

Providing and fixing 8" stainless steel tower bolts ISI marked on door and window frmaes complete in all respect as per the directions of Engineer-in-charge

Providing and fixing 12 mm thick frrameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom pivot and double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge

Providing and Fixing 1'-3" stainless steel handles ISI marked on door and window frames complete in all respect as per the directions of Engineer-in-charge

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption's less than 0.08% and conforming IS: 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete Size 600X600 mm

CONCEALED IN WALLL: Providing and fixing chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with prior approval of Engineer-in-charge), having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings i/c fixing the pipe with clamps at 1:00 m spacing including jointing of pipes and fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-charge. SDR 11 CPVC pipes and fittings 25 mm o/d.

Providing, Laying, fixing and jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with prio approval of Engineer-in-charge) along the Trenches and laying the same in Trenches to correct alignment and Gradients, cutting, jointing and testing complete as per specifications. 75mm o/d PVC of 4 Kgf./sqcm

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I. pipes line and making good the same to its original condition. (a) size 75mm X 75mm

Providing, Laying, fixing and jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with prio approval of Engineer-in-charge) along the Trenches and laying the same in Trenches to correct alignment and Gradients, cutting, jointing and testing complete as per specifications. 63mm o/d PVC of 4 Kgf./sqcm

Providing and Fixing in position stop cock/Angle valve of approved make (to the approval of Engineer-in-charge) complete in all respect. (h) PTMT 20 mm stop cock.

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1 mm thick, grade-304 (18/8) with waste coupling complete in all respect. (c) Sink with drain board overall size 1070X464 mm bowl size 430X355X200mm and waste coupling

Providing and Fixing in position C.P. Brass Sink Cock with swinging spout (wall mounted) of approved make (to the approval of Engineer-in-cahrge) complete in all respect.

Providing and Fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glossy/Highly Glossy finish/Highlighter/emboss confoming to IS: 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 X 300 mm as approved by Engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.,3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acrylic Wall putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic wall putty on new plastered surface. Complete as per specifications

Distempering with Acrilic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade

Painting two or more coats with synthetic enamel paints in all shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.

Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum ) false ceiling tiles of Size 595X595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as IS 8225:1987, Non combustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15X32 mm of length 3000 mm, cross - T of size 15X32mm of length 600 mm to form grid module of size 600X600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @80 hrams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85X25X2mm. Galvanized iron perimeter wall angle of size 24X24X0.40 mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge . 8 mm thick square edged semi perforated GFRG (Glass Fibre Reinforced Gypsum ) false ceiling tiles of size 595X595 mm

Mobile Storage compactor for filling (2-Bay Mechanized Drive Type Mobile Storage Compactorfs having Single Faced Fixed, Single Faced moveable and Double Faced / Dual / Twin Movable Rows, total 8 number of rows in one set)

Office Chair executive (Revolving Chair with Center tilt mechanism)

Modular Extendable conference Table Prelam (both sides) Table Top wooden, for committee room

Modular Work stations with single seater Rectangular Cluster

Providing and installation of split AC"s of reputable make (1.8 ton)

Providing and installation of RO system (Kent Reverse Osmosis based Water Treatment System above 50 LPH Capacity above 50 LPH and upto 100 LPH Storage Tank)

Hiance Products Storage Type Water Cooler (60 LPH Cooling Capacity)

JATTANA CONSTRUCTION CO (BID ID -670914)

KRISHNA BUILDER (BID ID -671115)