SITC of 9 nos. lifts for Multistoried Residential Complex for Haryana State Pollution Control Board on plot no. GH 5, Sector 23, Panchkula.

Amount

S/I/T/C of 9 nos lifts

Supply, Installation and testing and commissioning of elevator size 2200 x 2000 mm suitable for 16 passenger (1088kg wt.) having speed of 1.5 meter per second to travel from Basement + 3 floors about 19.3 meter with (4 stops 4 opening ), all opening on same side and having AC variable voltage, variable frequency drive microprocessor base closed loop system with duplex full control operation with/without attendant complete in all respect up to the entire satisfaction of Engineer-in-charge Make:- KONE/ OTIS/ SCHINDLER/ SHANGHAI MITSUBISHI/HYUNDAI. lift pit size (2200 x 2000 mm) 1 Nos lift clear size (1900 x 1700 mm) Load 1088 kg Speed 1.5 MPS Capacity 16person Type of control drive Microprocessor based AC variable voltage variable frequency Location of motor Permanent magnet synchronous electric traction type gear less motor to be hoisted on guide rail within the elevator hoist way Type of lift Machine roomless (MRL) Type of motor Gearless Location of corridor travel within the lift architrave on top landing No of Floor served 4 stops 4 opening Existing Hoist way size 2200 x 2000 mm Power supply 415 Volts, 3 phase to cycle automating current. Auxiliary Single phase 220 volts 50 cycles alternating current cycle) Car enclosure Constructed out of scratch resistance stainless steel panels (Hairline Finish) and the size will be as per manufacturers standard Flooring Granite floor 18 mm Thick at pattern Electric light LED inside car Fan Blowers to provide circulation-1 no. Fan with 300 mm sweep. No. of car Entrance 1 No. front located (with glass front panels) Car Entrance Centre opening automatic doors in scratch resistance steel frames and glass panels with glass panel with provision of emergency key at all landing clear opening 800 mm wide and 2000 mm high Hoist way Entrance Centre opening automatic doors in scratch resistance steel frames and glass panels with glass panel with provision of emergency key at all landing 800 mm wide and 2000 mm high Door Operations Automatic/V.V.V. F Door operation with adjustable door open and close timing Door Frames Stainless steel door frames with full glass panels Clear Opening 800 mm wide x 2000 mm high Operation Automatic Control Simplex Full collective with/without attendant Leveling accuracy ± 5 mm Counter weight Cast iron Other features to be provided Automatic Signal features in stainless steel finish To be provided by the company / bidder Rechargeable battery operated emergency alarm To be provided by the company / bidder Rechargeable battery operated emergency light To be provided by the company / bidder Press and speak intercom To be provided by the company / bidder Steel items such as Machine Beams, Doors, Frames sill angles, fascia plates. To be provided by the company / bidder Signal capable to withstanding +10% to 15% variation in supply voltage fluctuations. To be provided by the company / bidder Car platform constructed out of coiled rolled grain oriented formed sheets of steel To be provided by the company / bidder FIRE man drive at ground level To be provided by the company / bidder Infra-red curtain(Lambda Type) To be provided by the company / bidder Automatic rescue device to work in controller and power failure phase reversal single phase To be provided by the company / bidder Voice announcing system To be provided by the company / bidder A suitable box above the lift landing with LED illuminated Bilingual (in English & Hindi) sign(LIFT OUT OF ORDER) coming up simultaneously at all floors. To be provided by the company / bidder Voltage stabilizer for control system To be provided by the company / bidder Phase failure detection To be provided by the company / bidder Load Weighting Device To be provided by the company / bidder Braille symbol & suitable for handicapped person To be provided by the company / bidder Handrail on over wall To be provided by the company / bidder

Supply, Installation and testing and commissioning of elevator size 1600 x 2250 mm suitable for 13 passenger (884 kg wt.) having speed of 1.5 meter per second to travel from stilt + 6 floors about 26.5 meter with (7 stops 7 opening ), all opening on same side and having AC variable voltage, variable frequency drive microprocessor base closed loop system with duplex full control operation with/without attendant complete in all respect up to the entire satisfaction of Engineer-in-charge. Make:- KONE/ OTIS/ SCHINDLER/ SHANGHAI MITSUBISHI/HYUNDAI. lift pit size (1900 x 2550 mm) 4 NOS lift clear size (1600 x 2250 mm) Load 884 kg Speed 1.5 MPS Capacity 13 person Type of control drive Microprocessor based AC variable voltage variable frequency Location of motor Permanent magnet synchronous electric traction type gear less motor to be hoisted on guide rail within the elevator hoist way Type of lift Machine roomless (MRL) Type of motor Gearless Location of corridor travel within the lift architrave on top landing No of Floor served 7 stops 7 opening Existing Hoist way size 1900 x 2550 mm Power supply 415 Volts, 3 phase to cycle automating current. Auxiliary Single phase 220 volts 50 cycles alternating current cycle Car enclosure Constructed out of scratch resistance stainless steel panels (Hairline Finish) and the size will be as per manufacturers standard Flooring Granite floor 18 mm Thick at pattern Electric light LED inside car Fan Blowers to provide circulation-1 no. Fan with 300 mm sweep. No. of car Entrance 1 No. front located (with full glass front panels) Car Entrance Centre opening automatic doors in scratch resistance steel frames and glass panels with glass panel with provision of emergency key at all landing clear opening 800 mm wide and 2000 mm high Hoist way Entrance Centre opening automatic doors in scratch resistance steel frames and glass panels with glass panel with provision of emergency key at all landing 800 mm wide and 2000 mm high Door Operations Automatic/V.V.V. F Door operation with adjustable door open and close timing Door Frames Stainless steel door frames with full glass panels Clear Opening 800 mm wide x 2000 mm high Operation Automatic Control Simplex Full collective with/without attendant Leveling accuracy ± 5 mm Counter weight Cast iron Other features to be provided Automatic Signal features in stainless steel finish To be provided by the company / bidder Rechargeable battery operated emergency alarm To be provided by the company / bidder Rechargeable battery operated emergency light To be provided by the company / bidder Press and speak intercom To be provided by the company / bidder Steel items such as Machine Beams, Doors, Frames sill angles, fascia plates. To be provided by the company / bidder Signal capable to withstanding +10% to 15% variation in supply voltage fluctuations. To be provided by the company / bidder Car platform constructed out of coiled rolled grain oriented formed sheets of steel To be provided by the company / bidder FIRE man drive at ground level To be provided by the company / bidder Infra-red curtain(Lambda Type) To be provided by the company / bidder Automatic rescue device to work in controller and power failure phase reversal single phase To be provided by the company / bidder Voice announcing system To be provided by the company / bidder A suitable box above the lift landing with LED illuminated Bilingual (in English & Hindi) sign(LIFT OUT OF ORDER) coming up simultaneously at all floors. To be provided by the company / bidder Voltage stabilizer for control system To be provided by the company / bidder Phase failure detection To be provided by the company / bidder Load Weighting Device To be provided by the company / bidder Braille symbol & suitable for handicapped person To be provided by the company / bidder Handrail on over wall To be provided by the company / bidder Minor work including Civil and Electrical like earthing , minor building works , bulk head lights etc and panel covers (in SS)

Supply, erection and testing and commissioning of elevator size 1600 x 1600 mm suitable for 8 passenger (544 kg wt.) having speed of 1.5 meter per second to travel from stilt + 6 floors about 26.5 meter with (7 stops 7 opening ), all opening on same side and having AC variable voltage, variable frequency drive microprocessor base closed loop system with duplex full control operation with/without attendant complete in all respect up to the entire satisfaction of Engineer-in-charge. Make:- KONE/ OTIS/ SCHINDLER/ SHANGHAI MITSUBISHI /HYUNDAI. lift pit size (1900 x 1900 mm) 4 NOS lift clear size (1600 x 1600 mm) Load 544 kg Speed 1.5 MPS Capacity 8 person Type of control drive Microprocessor based AC variable voltage variable frequency Location of motor Permanent magnet synchronous electric traction type gear less motor to be hoisted on guide rail within the elevator hoist way Type of lift Machine roomless (MRL) Type of motor Gearless Location of corridor travel within the lift architrave on top landing No of Floor served 7 stops 7 opening Existing Hoist way size 1900 x 1900 mm Power supply 415 Volts, 3 phase to cycle automating current. Auxiliary Single phase 220 volts 50 cycles alternating current cycle) Car enclosure Constructed out of scratch resistance stainless steel panels (Hairline Finish) and the size will be as per manufacturers standard Flooring Granite floor 18 mm Thick at pattern Electric light LED inside car Fan Blowers to provide circulation-1 no. Fan with 300 mm sweep. No. of car Entrance 1 No. front located (with glass front panels) Car Entrance Centre opening automatic doors in scratch resistance steel frames and glass panels with glass panel with provision of emergency key at all landing clear opening 800 mm wide and 2000 mm high Hoist way Entrance Centre opening automatic doors in scratch resistance steel frames and glass panels with glass panel with provision of emergency key at all landing 800 mm wide and 2000 mm high Door Operations Automatic/V.V.V. F Door operation with adjustable door open and close timing Door Frames Stainless steel door frames with glass panels Clear Opening 800 mm wide x 2000 mm high Operation Automatic Control Simplex Full collective with/without attendant Leveling accuracy ± 5 mm Counter weight Cast iron Other features to be provided Automatic Signal features in stainless steel finish To be provided by the company / bidder Rechargeable battery operated emergency alarm To be provided by the company / bidder Rechargeable battery operated emergency light To be provided by the company / bidder Press and speak intercom To be provided by the company / bidder Steel items such as Machine Beams, Doors, Frames sill angles, fascia plates. To be provided by the company / bidder Signal capable to withstanding +10% to 15% variation in supply voltage fluctuations. To be provided by the company / bidder Car platform constructed out of coiled rolled grain oriented formed sheets of steel To be provided by the company / bidder FIRE man drive at ground level To be provided by the company / bidder Infra-red curtain(Lambda Type) To be provided by the company / bidder Automatic rescue device to work in controller and power failure phase reversal single phase To be provided by the company / bidder Voice announcing system To be provided by the company / bidder A suitable box above the lift landing with LED illuminated Bilingual (in English & Hindi) sign(LIFT OUT OF ORDER) coming up simultaneously at all floors. To be provided by the company / bidder Voltage stabilizer for control system To be provided by the company / bidder Phase failure detection To be provided by the company / bidder Load Weighting Device To be provided by the company / bidder Braille symbol & suitable for handicapped person To be provided by the company / bidder Handrail on over wall To be provided by the company / bidder Minor work including Civil and Electrical like earthing , minor building works , bulk head lights ELCB and panel covers (in SS)

S/I//T/C of GLS bulkhead luminaire to 10W LED (IP 65). Make Bajaj/Crompton/Philips /Havells

Wiring in 1.5sqmm PVC insulated copper conductor cable in 1.6mm thick conduit pipe.Light Point without control: Medium Point

3-Pin 5Amp, Plug point including earthing the 3rd Pin etc.: Medium Point

(i) Earthing with G.I. eath plate 600mm x600mm x6mm thick including accessories and Pdg. Masonry enclosures with cover plate having Locking arrangement and wearing pipe etc.( but without charcoal or coke and salt) complete as required.

(ii) Extra for charcoal or coke and salt G.I plate or copper plate earth electrode.

S/E of 25mm x 5mm thick G.I.Strip on surface or recessed for connections etc as required with all labour and material.

Supply and Erection of Under Ground Cable, loose in existing pipe or trenches complete with necessary connections. 25Sqmm 4 Core Cable (Armoured)

Supply and Erection of Sheet Steel enclosures distribution boards suitable for MCB's etc. on wall/ existing board/ pedestal with rag bolts including bonding to earth:Distribution Board 6 Way

Supply and Erection of miniature circuit breaker/ isolator 240/415V in the existing distribution board including making necessary connections. 40Amp to 63Amp (Triple Pole with Neutral)

6Amp to 32 Amp

M/s Liftsquare