Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹1.6 L
Closing Date
26 Jul 2024, 11:00 amClosed
Executive Engineer Mech and Hosp Division Udhampur
Executive Engineer Mech and Hosp Division Udhampur
Restoration of Damaged HDO Office Building of Horticulture Department at Ramnagar
2024_PWDJK_252663_1
MHDU/TS/2024-25/19
Open Tender
Miscellaneous Works
Item Rate
20 days
Ramnagar
Please refer Tender documents.
2 documents required · 2 mandatory
₹200
XEN MHD Udhampur
Exempted
7 Aug 2024
10 Jul 2024
26 Jul 2024
10 Jul 2024
26 Jul 2024
11 Jul 2024
Amount
Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar for walls Quantity = 1.69 Cum
Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) Quantity = 16.01 Sqm
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Quantity = 16.01 Sqm
Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work Quantity = 16.01 Sqm
Renewing glass panes, with putty and nails wherever necessary including raking out old putty : Float glass panes of thickness 4.0 mm(weight not less than10kg/sqm) Quantity = 5.50 Sqm
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding holdfasts in cement concrete blocks of size 15x10x10cm with cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 20 mm nominal size)painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead: Door chowkhats
Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding holdfasts in cement concrete blocks of size 15x10x10cm with cement concrete 1:3:6 (1 cement :3 coarse sand: 6 graded stone aggregate 20 mm nominal size)painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground within 50 meters lead: Window chowkhats
Providing Wood Work in frames of doors/windows/Almirah using 2nd class Kail wood. Qty= 0.89 Cum
Providing and fixing fly proof wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions all complete. With Galvanized M.S. Wire gauge with wire of dia 0.63 mm Quantity = 5.50 Sqm
Providing and applying two coats of fire retardant paint on cleaned wood/ply surface @ 3.5sqm per liter per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardantQty= 28.04 Sqm
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. Quantity= 28.04 Sqm
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.ngratings, frames, guard bar, ladder, railings, brackets, gates and similar works. Quantity = 50 kg
Applying priming coat: 13.58.3 With ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanized iron/steel works Quantity = 22.96 Sqm
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complete On steel work Quantity = 22.96 Sqm
Providing and fitting of Heavy duty standard Make Hardware fittingsfor doors, windows, like latches, handles, Wire gauze, hinges, butt hinges, tower bolts, casement fasteners, door springs, window fittings, anchor fasteners, door fasteners, door stoppers, door fittings, flush bolts and all other essentials required for double leaf doors & windows, single leaf cupboards complete. doors- 05 Nos, windows-04 Nos (Double Opening with four leaves for each) Job includes the cost of material and labour charges including all taxes.
R M ENTERPRISES
M/S UK MECH AND ELECT ENGG WORKS
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .