Construction of Office Building for Engineering Cell of Health and Family Welfare Department Government of Manipur.

Amount

CIVIL WORK

R.C.C. WORK

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :

1:1:2 (1 cement : 1 coarse sand : 2 graded stone aggregate 20 mm nominal size)

R.C.C. work in beams, suspended floors, roofs having slope uptp 15o landings, balconies, shelves, chajjas, lintels, band, plain window sills, staircases and spiral staircases above plinth level upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with.

1 : 1 .5: 3 (1 cement :1.5 coarse sand :3 graded stone aggregate 20 mm nominal size)

Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars.

FORM WORK

Providing formwork i/c centering & shuttering so as to give a rough finish strutting & propping etc. height of propping and centering below supportingfloor to ceiling not exceeding 4 m. & removal for the same for in-situ reinforced and plain concrete work in : [Using 12mm shuttering ply]

Columns, pillars, posts and struts (Square, rectangular or polygonal in plan).

Sides and soffits of beams, beam launching, cantilever girders, bressumers and lintel not exceeding 1m in depth.

Flat surface such as suspended floors, roofs, landings, and the like floors etc. upto 200 mm in thickness

FACC Block in cement mortar 1:3 (1 cement : 3 coarse sand) in superstructure.

WOOD WORKS

Providing wood works in frames of doors, windows, clerestory windows & other frames, wrought frameed & fixed in possition

Local best quality Uningthou

P/F 38 mm. thick panelled, glazed or panelled and glazed shutters for doors, windows and clerestory windows i/c bright finished or black enamelled M.S. Iron butt hinges with necessary screws.

Local best quality Uningthou

Providing and fixing brass sliding bolts bright finished or black enamelled with nuts & screws etc.

Providing & fixing brass brass Tower bolts (barrel type) with screws etc. complete.

Providing & fixing brass handles with necessary screws etc. complete.

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Twin rubber stopper

Providing and fixing 20mm plank as eave board with

Uningthou wood

STEEL WORKS:

Steel work in single sections, i/c cutting, hoisting, fixing in position & applying a priming coat of red lead paint

In M.S. Flat/Plate

Providing & fixing in position collapsible steel shutters with vertical channels 20 mm x 10 mm x 2mm & braced with flat iron daigonals 20 mm x 5 mm sizes with top & bottom rails of T iron 40 mm x 40 mm x 6 mm with 38 mm dai steel pulleys complete with bolts & nuts, locking arrangement, stoppers, handles i/c applying a priming coat of red led pint

Extra for providing and fixing wind ties of 40x 6 mm flat iron section.

FLOORING:

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption's less than 0.08% nad conforming to IS:15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete.

Size of tile 600x600 mm (Single Charged)

Branded

White glazed tile 10 mm thick in skirting risers of steps & dado on 10 mm thick cement plaster 1:3 (1cement:3coarse sand) & jointed with white cement slurry.

20x30 cm size

ROOFING AND CEILING:

Providing and fixing ceiling at all hieghts including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/sqm (both side inclusive) as per IS: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm flanges od 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs 230 mm interval, including fixing of gypsum board to

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095 - Part 1

Trapzodial Profile Pre-painted profile sheet roofing of approved brand DYNA Roof or equivalent with selt drilling screws of 68mm long Xylon coated screws with PVC washer & cap complete, excluding the coat of purlinsr & trusses

Pre-painted Galvalume Sheet ( PPGL)

i) Profile sheet 0.50 mm /4.2 kgs/sqm

Trapzodial Pre-painted Profile Sheet for Ridges Gutter or Valley 610 mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling screws of 68mm long Xylon coated screws with PVC washer & caps completed, excluding the coat of purlins rafters & trusses.

Pre-painted Galvalume Sheet (PPGL)

i) Profile sheet 0.40 mm /3.2 kgs/sqm

Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide zinc chrome primer conforming to IS:2074-1979) welded and bolted including special shape washer etc. complete.

Electric resistant welded welded tube (Conforming to IS : 1611- 1979 )

Providing and fixing 5mm colour coated structural glazing in aluminium door, window, ventilator shutters and partitions etc.with EPDM rubber/neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge including cost of aluminuim frame work and sealant in between frame and wall joints With structural glass panes of 5.5mm thickness

Providing and fixing 12mm thick prelaminated particle board flat pressed three years layer or graded wood particle board conforming to IS:12823 Grade 1 Type II in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass/stainless steel screws etc. complete as par architectural drawing and directions of engineer-in-charge

Pre-laminated particle board with decorative lamination on both

Providing and fixing glazing in aluminium door, window, ventilators shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-Charge. (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.50 mm thickness.

Providing and fixing alluminium louvres with 4mm thick float glass in window/ventilator with all neccessary fitting etc. complete as per the architectural drawings and the directions of engineer-in-charge.

FINISHING:

15 mm cement plaster 1:4 (1 cement:4 coarse sand).

Distempering (two or more coats) with oil bound washable distemper of approved quality on new work i/c priming coat to hive an even shade.

Finishing walls with weather shield paint of approved quality on new work ( three or more coats) to give even shade.

Applying ready mixed priming coat pink primer of approved quality on wood work.

Applying ready mixed priming coat (red lead primer of approved quality) on steel work.

Providing and applying plaster of paris putty of 2 mm thickness over plaster surface to prepare the surface even and smooth complete.

Painting (two or more coats) with synthetic enamel paint of approved quality of black or chocolate colour on wood work to give an even shade.

Painting (two or more coats) with synthetic enamel paint of approved quality of black or chocolate colour steel work to give an even shade.

SH: SANITARY WORK

EarthWork

Earth work in excavation in foundation trenches or drains including dressing of sides and ramming of bottoms lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres

Loose /soft Soil

Filling available excavated earth (excluding rock) in trenches, plinth sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering lead upto 50 metres lift upto 1.5 metre

CONCRETE WORK

Providing and laying cement concrete in foundation and plinth excluding the cost of centering and shuttering in

1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

FORM WORKS:

Providing formwork i/c centering & shuttering so as to give a rough finish strutting & propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m. & removal for the same for in-situ reinforced and plain concrete work in :

Foundation footings, bases of columns etc. & mass concrete

Flat surfaces such as soffits of suspended floors, roofs landing and the like floors etc. up to 200 mm in thickness

RCC WORKS:

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15 landings, balconies, shelves, chajjas, lintels, bands, plain window sills,staircases and spiral stair cases above plinth level upto floor five level, excluding the cost of centering,shuttering, finishing and reinforcement with 1 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level.

Thermo-Mechanically Treated bars

PRE-CAST:

Providing, hoisting and fixing up to floor five level precastreinforced cement concrete work in string courses, bands,copings, bed plates, anchor blocks, plain window sills andthe like, including the cost of required centering, shutteringbut excluding cost of reinforcement, with

1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size).

Brickworks:

2nd class (local first class) brick work in foundation and plinth in cement mortar 1:4 (1 cement: 4 fine sand)

Cement mortar 1:4 (1 cement : 4 coarse sand)

Half brick masonry 2nd class (local 1st class) in cementmortar 1:4 (1 cement: 4 coarse sand) in superstructure

Honeycomb brick work (75 mm) thick with first class brick in cement mortar 1:4 (1 cement: 4 coarse sand)

Flooring:

50 mm cement concrete flooring 1:2:4 (1 cement: 2 coarse sand:4 stone aggregate 20 mm & down gauge) finished with a floating coat of neat cement.

20 mm thick cement plaster skirting (upto 30cm height) withcement mortr 1:3 (1 cement:3 coarse sand ) finished with afloating coat of neat cement i/c. rounding of junctions with floors

SANITARY INSTALLATION

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with scat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever). conforming to IS : 7231. with all fittings and fixtures complete. including cutting and making good the walls and floors wherever required :

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required:

White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P.

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. ofquality and make as approved by Engineer - in -charge.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Flexible pipe

32 mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers co

Providing and fixing liquid soap container of glass with C.P. lid andbrackets fixed to wooden cleats with C.P. brass screws

Providing and fixing 610 x 20 mm Diplomat brass towel rail completewith C.P. brass brackets fixed to wooden cleats with C.P. brassscrews

Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fittings with solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in charge

75 mm dia

110 mm dia

WATER SUPPLY

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the

20 mm diameter

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, efilling & testing of joints complete as per direction of Engineer in Charge

25 mm diameter

32 mm diameter

Providing and fixing GI pipes complete with GI fittings i/c trenching and refilling etc. (external work)

32 mm diameter

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931

15 mm nominal bore

Providing and fixing ball valve (brass) complete of approved quality.

25 mm diameter

Providing and fixing Water Storage Tanks with 400 mm diameter nominal base G.I. overflow tube 25 mm nominal G.I. inlet and 15 mm nominal G.I. outlet tube i/c hoisting a height of 10 m aboveground level

1000 litres net capacity storage tanks

Providing and fixing C.P. brass angle valve for basin mixer and geyser points Of approved quality conforming to IS:8931

15 mm nominal bore

S.H: PROVIDING & INSTALLATION OF INTERNAL ELECTRIFICATION

COPPER WIRING IN PVC CONDUIT.

Wiring for light point / Fan point / Exhaust Fan point / Call bell point with 1.5 mm. FR PVC insulated copper conductor single core cable in surface / recessed steel conduit with modular type switch modular plate, suitable G.I. box and earthing the point with 1.5 mm 2 FR PVC insluted copper conductor single core cable etc., as reqd.

Group A

Group B

Group C

Wiring for twin control point with 1.5 sqmm FR PVC insulated copper conductur single core cable in surface/recessed steel conduit, 2 way modular type switch, modular plate suitable size GI box and earthing the point with 1.5 sqmm FR insulated copper conductor single core cable etc. as required.

Wiring for light pt/power plug with 4x4mm2 FR pvc ins. Cu.cond.s/c cable in surface /recessed steel conduit alongwith 2 no. 4mm2 FR pvc.ins.Cu.cond. s/c cable for loop earthing etc.as reqd.

Wiring for circuit/ Sub-main wiring along with earth wire with (the following sizes) of FR PVC insulated copper conductor single core cable in surface / recessed steel. conduit etc. as reqd.

2x1.5mm2+1x1.5mm2 earth wire

2x4mm2+1x4mm2 earth wire

2x6 mm2+1x6mm2 earth wire

Telephone Wiring in existing conduit

Supplying and drawing (following pair) 0.5 FR PVC insulated copper conductor unarmoured telephone cable in the existing surface/recessed steel/PVC conduit as reqd

TV Cable in existing conduit

Supply and drawing Co-Axial TV cable RG-6 grade 0.7mm solid copper conductor PE insulated shielded with file tinned copper braid and protected in PVC sheath in existing surface/recessed steel/PVC conduit as reqd

S/F (following Modular type switch/socket) on the existing switch box i/c connection etc.as reqd.

5/6 amps. Switch

2 way 5/6 amps switch

15/16 amp.s switch

3 pin 5/6 amps.socket outlet

6 pin 15/16 amps.socket outlet

S/F 25 amp Air-Conditioner power plug point i/c 4 modules metal box on surface or in recess 4-modules plate and cover in front, 25 amp modular starter 25 amp modular socket outlet and 25 amp plug plate etc/ as reqd

Supplying & fixing stepped type electronic fan regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd.

S/F (following size/modular switch plate base and cover plate for modular switch in recess SSS as reqd.

1 or 2 module (75mmx75mm)

6 module

8 module

S/F 3 pin amp ceiling rose on the existing junction box/wooden box i/c connection etc. reqd.

Providing and Fixings (following capacity TP & N) dis-connection fuse switch unit inside the existing cubicle panel board with ISI marks HRC fuses including drilling holes in the cubicle panel board, making connection as reqd.

400 amp. T.P. & N

S/F (following way) single door pole & neutral, sheet MCCB distribution board, 240V on surface/recessed complete with tinned Cu.bus bar neutral bus bar, earth bar, din bar detachable gland plate, interconnection, phosphatized and power painted i/c earthing etc.as reqd. (But without MCB/RCCB/Isolator)

12 Way Double door

S/F (following way) single door pole & neutral, sheet MCCB distribution board, 240V on surface/recessed complete with tinned Cu.bus bar neutral bus bar, earth bar, din bar detachable gland plate, interconnection, phosphatized and power painted i/c earthing etc.as reqd. (But without MCB/RCCB/Isolator)

S/F 5 amp. to 32 amp.rating 230V 'B' series MCB for lighting and other load of (following pole) in the existing MCB DB complete with connection testing and commissioning etc.as reqd.

Single pole

S/F (following rating) double pole 240V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd. (a) 63 amp.

S/F 48" (1200mm) A.C. ceiling fan complete with down rod, canopy, 3 (three) blades but without regulator etc as reqd. (Make Bajaj/ Usha or similar

S/F 305mm sweep exhaust fan complete with all accessories i/c connection etc as reqd

S/F 2 tone capacity split type Air conditioner, (Diamond, 3 Star, 5G 30, G-SC 24 FD 3 WJH) complete with Indo voltage stabilizer, Automatic 5KVA (140-280 for 2 ton)

Supplying , Installation, testing and commissioning of LED Lamp (havell,s /Bajaja/Phillips/Cromton). including connection etc. as required.

With CFL 12/15 Watts Lamp.

Supplying, Erection, testing and commissioning of (pre-wired) wall bracket/ceiling fittings of all sizes and shapes containing CFL/LED/W GLS lamps per fitting, complete with all accessories including connection etc. as required (havell,s /Bajaja/Phillips/Cromton).

Ceiling fitting (Surface) with 12/15 watt LED Lamp.

M/S PAMESHOR ENTERPRISES

M/s G.Thaninjao R.Naga and Sons