Supply installation testing and commissioning of solar lights

Amount

Supply and erection of octagonal type G.I Pole of 6mtr. height with 70A/F at Top and 130 A/F at bottom, 3mm thick,door opening(Reinforced),name Plate,200x200x12mm base plate,Pole flange as per IS 2062.The pole/shaft design shall be as per as BS EN-40-3-1&3 with Design Criteria 1. Basic Wind speed as per -IS:875 Part III:1987 2.Topography-Flat 3.Terrain category -2 and design for a life span of 25year. The design shaft shall be as :S355 as per IS-2062, and finishing: with hot dip galvanized as per BS EN ISO 1461. The pole shaft, shall be of same make/brand as of light and to be certified by OEM of the respective make/brands,Complete Job Make:(Bajaj,Havells,Anchor(Panasonic),Jaquar) 1.5 m single bracket

-----------------do------------------ 1.5 m double bracket

Supply Installation, Testing and Commisioning of compact and fully integrated (All in one) intelligent designed 20W Solar Light Panel Luminaire,Built in PIR sensor, with adjustable Light output automatically,Light output, Rust and Vermin proof Aluminium housing,dust and waterproof with minimum autonomy/Backup 2 days with dimming,Charging time atleast 1 day,ingress Protection = IP 65,Impact Protection = IK 06, ideally suitable for Street Lights with PIR sensor and MPPT Charge controller having Efficiency = > 90% Luminaries efficacy = 125-140 lm/W, Correlated Colour Temperature 6000 ± 500K, LED Lamp Life = 50,000, Hours Solar Panel = 38 W(0/+4W) mono, Battery = 12.8v,18Ah(BIS Certified) Charger controller, Suitable for pole dia of 50-100 mm, complete job including 5 year warranty at site During the warranty Period the Light Shall be replaced with new one without any additional cost. Solar light should be similar to CAT SUNSOKO ALO-BSZSL 20 W LED. Make :(Bajaj,Havells,Anchor(Panasonic),Jaquar)

Providing Laying in position R.C.C foundation in M-20 Grade for erection of solar light panel shaft the job will include excavation of earth work of desire size including back filling of surplus earth, curing etc complete. The foundation shall consist of R.C.C M-20 Grade (1:1/2:3) of size 400mmx400mmx1400mmDeepwith Steel reinforcement consisting of 4no 12mm dia TMT steel and 8mm dia steel Strips placed @190mm c/c 4 no. J-Type bolts of EN8 Grade to be embedded in the RCC for fixing of pole /shaft over them, 2no. flexible PVC pipe of 25mm no. dia are to be placed for cable entryt. RCC upto ground level 400mmx400mmx1200mm and 400mmx400mmx200mm above ground level.complete job

HARI OM ASSOCIATES

Balvinder Singh

Harjeet Singh

M/s Guru Nanak Electricals