REPAIR MAINT OF PLUMBING ITEMS SANITARY FITTING

Amount

S & F in repairs vitreous china urinal half stall pattern white excluding flushing cistern , flush pipe and waste pipe etc complete all as specified and directed.

S&F in repairs Vitreous China wash hand basin white flat back size 580x450mm including brackets complete all as specified and directed.

S & F in repairs vitreous china sqatting pan, Orissa pattern, size 580 x 440 mm white , with integral foot rests excluding flushing cistern and flush pipe complete all as specified and directed.

S & F in repairs vitreous china wash down water closet pan(pedestal pattern) excluding flushing cistern and flush pipe etc complete all as specified and directed.

S & F in repairs plastic water closet seat cover and mild steel chromium plated or aluminised hinging device etc complete all as specified and directed.

S&F in repair health faucets ABS body with wall hook and 1.0 m long stainless steel braided rubber hose complete all as specified and directed.

S&F in repairs low level flushing cistern of capacity 10 litre, ISI marked complete with inlet ball valve and handle including bracket, waste pipe complete all as specified and directed.

S&F in repairs chromium plated brass angle valve for 15 mm bore pipe complete all as specified and directed.

S & F in repair stop valves 15 mm bore cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S & F in repairs 15mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S & F in repairs PVC connections 15 mm dia with PTMT nuts of length 600 mm complete all as specified and directed.

S&Fin repair brass chromium plated shower rose 125 mm size with or without swivel joint complete all as specified and directed.

S & F in repair 15 mm bore fancy type chromium plated bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair kitchen sink with draining board made of stainless steel 1mm thick with plugs, washers & waste including bedding in cement mortar to dwarf wall or including fixing cantilever brackets , waste pipe, waste coupling and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x160 mm. complete all as specified and directed.

M&L in repair 32 mm waste coupling PTMT (minimum weight 45 gms) (half or full threaded) in basins, etc. with bedded in red lead cement and other end fixed complete all as specified and directed.

S&F 32mm PVC flexible waste pipe 800mm long etc complete all as specified & directed.

S& F in repair shelf of PTMT (minimum weight 300 gms) fixed with and including chromium plated brass screws and wooden / plastic cleats complete all as specified and directed.

S&F in repair PTMT towel rail 600mm long (minimum weight 190 gms) with chromium plated brass screw and wooden or plastic cleats etc complete all as specified and directed.

S&F in repair mirror cabinet PTMT size 350X445 mm complete all as specified and directed.

S&F in repair 125mm PTMT Grating (minimum weight 40 gms) to trap with waste hole in cement mortar etc complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipes single socket, in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S&F in repairs 75mm bore PVC (SWR) pipes single socket, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed.

S & F PVC (SWR) bends with access door any radius (75mm Bore) complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc any description complete all as specified and directed.

M&L for rendering 15 mm thick on any faces of brick work in CM1:6, finished even and fair complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

Dismantling floor, hearth wall tiling including cement mortar bedding (but not backing) including rubbish off the premises complete all as specified and directed.

M&L for coloured glazed ceramic tiles (designer Pattern) in vertical surface 450 x 300 x 7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles including 10mm thick rendering in CM 1:4 on brick wall complete all as specified and as directed.

M&L for non skid ceramic coloured tiles (squre/ rectangular) area of each tiles exc 0.06 sqm but n. exc 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed with white cement and coloured pigment to match the tiles over 15mm thick screed bed in CM 1:6.complete all as specified and directed.

Taking down 20 mm bore steel tubing /PPR and connections including removal to store/ site and making good disturbed portion as required complete all as specified and directed.

Re-fixing 20 mm bore old steel tubing and connection in new or old position walls, ceiling , roof etc complete all as specified and directed.

Supply and fixing 20 mm bore tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings, roofs or laid in floors complete all as specified and directed.

Taking down 15 mm bore steel tubing /PPR and connections including removal to store/ site and making good disturbed portion as required complete all as specified and directed.

Re-fixing 15 mm bore old steel tubing and connection in new or old position walls, ceiling , roof etc complete all as specified and directed.

Supply and fixing 15 mm bore tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings, roofs or laid in floors complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) Capacity in litres 500 Ltr including float valve complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) Capacity in litres 1000 Ltr including float valve complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) Capacity in litres 2000 Ltr including float valve complete all as specified and directed.

Supply and fixing rotational moulded polyethylene water storage tanks, three layered with cover (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (Capacity in litres 500) complete all as specified and directed.

Supply and fixing rotational moulded polyethylene water storage tanks, three layered with cover (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (Capacity in litres 1000) complete all as specified and directed.

Supply and fixing rotational moulded polyethylene water storage tanks, three layered with cover (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I (Capacity in litres 2000) complete all as specified and directed.

S&F in repair gun-metal globe or gate valves 20 mm dia with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S & F ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (20mm bore dia of pipe ) complete all as specified and directed.

S & F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (20mm bore dia of pipe ) complete all as specified and directed.

S&F in repair brass chromium plated hand shower with stainless steel 1.5 mtr flexible hose complete all as specified and directed.

Taking down rotational moulded polyethylene water storage tank covers complete all as specified and directed.

S&F 1 mm thick glvanised steel sheet water tank cover suitable for 500 and 1000 ltr water tank fixed with machine screw etc complete all as specified and directed

S & F in repairs PVC (SWR) pipes single socket, in any length with rubber ring joints, fixed to wall (110mm bore) complete all as specified and directed.

S&F in repairs PVC (SWR) bends with access door any radius 110mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) junction single (single ‘T’) equal or unequal, 110mm dia complete all as specified and directed

Dismantling of concrete / brick bats in sunken slab and reused complete all as specified and directed.

The sunken slab portion treatment cover the following :- (a) Preparation of bottom & sides of sunken slabs portion by brushing, cleaning and applying 15 mm thick plaster in CM 1:4 with and including water proofing compound @ 2% by weight of cement complete all as specified and directed. (b) Applying one coat of blown bitumen 85/25 grade applied @ 1.2 kg/Sqm over a coat of bituminous primer @ 0.5 kg/sqm as per manufacturer’s instruction after eliminating all sharp projection & cleaning of loose material of plastered surfaces. (c) Laying polymeric standard membrane felt with 90 micron HMHDPE centre core and weight not less than 3 Kg/Sqm fixed on the coated surface, bottom & side walls of the sunken portion. Minimum overlap of 75/80 mm fixed with torch application. Care shall be taken that no air bubble is left in between the surface of the floor/wall and the felt. (d) Applying a tack coat of hot bitumen grade 85/25 @ 1.2 Kg/Sqm and as per manufacturer’s instruction.

M & L for PCC 1:5:10, type E-2 (using 40mm graded stone aggregate) as in mass concrete, sub base of flooring etc complete all as specified and as directed.

M&L 25 mm thick, cement concrete type B-0 , 1:2:4 (12.5 mm graded stone aggregate) in floor complete all as specified and directed.

S & F in repairs 15mm bore dia cast copper alloy chromium plated wall mixer screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S & F in repairs 15mm bore dia cast copper alloy chromium plated basin mixer screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed.

S & F in repair for stainless steel soap dish recessed type complete all as specified & and as directed. Make : Jaquar CAT No. 1531 or equivalent approved

S & F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf with chromium plated bracket guard and railing 60 cm long complete all as specified & as directed. Make: Jaquar CAT No. CAN 1171N or equivalent approved

S & F in repair vitreous china coloured closet EWC wall hung, extended 'P' trap complete all ass specifeid & as directed. Make: Cera CAT No. 2038 or equivalent approved

aS & F in repair vitreous china, coloured cistern 10 ltrs capacity for closet wall hung extended EWC complete all as specified and as directed. Make: Cera CAT No. 2118 or equivalent approved

S & F in repair vitreous china coloured pedestal pattern wash hand basin (Carnival) of size 54 cm x 48 cm complete all as specified & as directed.

Tulsi Enterprises

N.K. ENTERPRISES

M/s M S Sharma and Co.

SAROJ CONSTRUCTIONS

ms Vishesh builders