Augmentation of IT Infrastructure in Server Room at High Court Complex Jammu (4th call)

Amount

Supply, intastallation, testing & commissioning of 40 KVA Capacity radiator cooled DG Set with suitable capacity engine directly coupled with alternator for 415 volt, 3 phase, 50 Hz, 4 wire, generation system complete with accessories, fuel oil tank & control panel etc as required and sound proof acquastic enclosure for the DG SET, including supply, fixing of antivibration pads suitable for 40 KVA DG Set as per standards of Engine manufacture, provision of control cable from engine to control panel to engine. Provision of pipe fuel pipe line of suitable size fron fuel tank to engine and over flow pipe engine to fuel tank complete gate valve and fitting leader maker etc. Supply , Intallation of starting batteries of suitable AH as recommended by manufacterer Heavy duty complete as required at site complete with stand and battery charger residentials sylencer sutaible for diesel engine exhaust pipe line complete complete flange, bend, flexible pipe all as required and as directed by engineer incharge.

DIESEL ENGINE (CPCB-2 NORMS COMPLANT) 4 Stroke, Radiator Coolled, Diesel Engine Model Having Following Arrangement :- Flywheel with Starter Ring for Generating Set Air Filter , Lube Oil Cooler Assembly with accessories. Exhaust air manifold Exhaust Bellow Fuel Fiter Exhaust Gas Turbocharger with after Coller Day tank for fuel with markings ECP Panel mounted on a separate frame. Radiator with Pusher Type Fan, With Fan Guard, Coolant Pump 24V Electrical Starting System with Starter Motor and Battery Charging Alternator Engine Mounting Supports Make Engine:- Cummins, Kirloskar & Volvo

ALTERNATOR Rated at 40 KVA, 415 Volts, 3 Phase, 4 Wire, 0.8 P.F (lag), 50HZ, 1500 RPM, IN Accordance with IS 4722 as per following Specification Rating: Suitable for an over-load of 10% for 1 hour in every 12 hours operation. Voltage Regulation: Provided with fast response thyristor type electronic automatic voltage regulator, which holds output voltage within desired limits (+/- 1%). Excitation: Self excited-self regulated. Alternator Loading: Suitable for taking rated load immediately after machine reaches rated voltage and speed. Vibration: Suitable for direct coupling with Engine and mounted on common M.S. Channel base frame. Enclosure: Screen protected drip proof enclosure with IP – 23 degree of protection. Cooling: Air Cooled type with radial fan mounted on Rotor. Winding and Insulation: Insulation class H as defined in IS – 4722. Make Alternator:- Kriloskar, Marshall, & Leroy Somer.

ACCESSORIES :- MS Base Frame Suitable for Mounting of the Offered Engine and Alternator. Day Fuel Tank of Standard Capacity Complete Fuel Gauge, Inlet/Outlet Connections, Drains Plug, Etc 2 Nos 12 Volts DC Battery of SUITABLE Capacity with Leads 1 Set of AVM Pads Fitted in Base Frame. AMF Panel with standard acessories & shed etc as required at site

Supplying and fixing of PVC insulated and PVC sheated aluminium power cable of 1.1 kv grade of following sizes on surfaced/along the wall etc as required with proper caumping with G.I clamps.

120 sq. mm 3.5 core

Supply, installation, testing & commissioning of GI Electrode Earthing with 50mm dia and 3 meter length, with 3mm thick the electrode should be hot-dip galvinised. The GI Electrode shall be pre-filled with Cristaline Conductive Materila (CCM). The GI electrode shall be surrounded with BEE MOIST compound to provide maximum contact betwen the electrode and compound should be eco-friendly and having ROHS certification GI Electrode Earthing should be maintinance free and does not require regular manual addition of water GI Electrode shall be tested from CPRI. The earthing pit should be covered with PVC cover.

Providing and laying of 25 x 5 mm G.I strip from G.I rod upto the main panel.

Supply, installation, testing & commissioning of maintenance free copper earthing system with 3 mtrs. Electrode 40 mm dia with minium 2mm thick and does not require manual additional of water. The electrode shall be pre-filled with hygroscopic powder and provided with suitable breathing and leaching ports at the ends. the electrode shall be surrounded by suitable powdered form of BEE MOIST so as to provide maximum contact between the electrode and the compund. The compound should be eco-friendly The earthing pit should be covered with PVC cover.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Construction of PCC Platform for DG Set (Civil Work) of size as required

Supplying, installation, testing and commissioning of Tower AC's Cold type, Three Phase, Dust Filter, Anti-corrosive, Blue Fin Copper Condensor, extended Piping lengths economy mode, hydrophilic Blue Evaporator Fins, Anti Freeze Thermostate, Drymode, Automode memory fuction self Diagnostic, Cleanable Panel, Timers, Autostart, Remote Control Air Swing, Powder Coated outdoor body. (a) Capacity 2.0 T.R (b) Noise level Indoor Below 54 Db. (c) Noise level Outdoor Below 68 Db.

Supplying, Installation, Testing & Commissioning of 5 KVA automatic voltage stabilzer copper wound wall mounted, single phase with range of 90-240 V. The job includes repairing the walls where necessary. Warrantee.:- 2 Years from the date of installation.

Providing & Fixing of outdoor unit mounting arrangement made out of MS Angle iron and duly powder coated including minor civil work for 2.0 T.R Tower AC unit etc. complete as required .

Providing & Fixing of stand for indoor unit of 2.0 T.R Tower AC made out of MS Angle iron and duly powder coated including minor civil work etc. complete as required .

Supplying and fixing of Extra length of copper pipe suitable for 2.0 T. R Tower AC's outdoor unit and cable of required size.

Supplying & laying of drain pipe suitable for 2.0 T.R indoor unit in recess and making good the surface as required.

Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying installation, testing and commissioning of Parallel Card for Existing 2 No 10 KVA UPS (Make AVO) to make the UPS's in Master Slave mode.

Supplying installation, testing and commissioning of Automated Monitoring & Alert System (GSM & TCP-IP based Temperature Monitor and Alert system). i). Temperature Sensor ii) Humidity Sensor

Supplying installation, testing and commissioning of Biometric Access for Server room having EM lock, Bolt Lock, Strike Lock, Web Based Finger Lock, RFID Card Lock and Pin Lock system.

Supplying installation, testing and commissioning of Standalone Rodent Repellant system with transducer covering area around 300 sq. ft.

Supplying installation, testing and commissioning of Automatic Fire Fighting service.

Fire Extinguisher HFC236 (Gas) 2 KG MS SP Red

Standalone Automated Fire Suppression System- HFC236 (Gas) 5 KG MS SP Red

Fire Extinguisher MAP90 6 KG M.S SP Red

Fire Extinguisher Aluminium CO2 Wheel type 4.5 KG

Supplying of Laptop for Server/Network Trouble Shooting having following Specification: -

I 7 Processor 10th Generation, 16 GB Ram, 1 TB HDD with 512 GB SSD and having Genuine Window 10 office (Professional)

Supplying ,installation testing and commissioning of 32 Channel Network Video Recorder (NVR).

4 TB Surveillance Hard Disk Drives

SUMIT SHARMA