GE 874/EWS-36/2023-24

Amount

BR and EM Portion

Dismantling of timber scantlings 40 sq cm and over in sec in any position in unframed work.

M &L for second class soft wood as in scantling clean sawn fixed in position.

M&L for second class soft (Except wood) as in scantling clean sawn fixed in position.

Dismantling of boarding, any description, fixed in any position with nails(in floor etc).

M & L for 2nd class softwood weather boarding clean sawn, plain 20mm thick or feather edge 15mm to 20mm thick and fixed with 30mm laps.

M & L for 2nd class softwood weather boarding but except material fixed with 30mm laps.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets.

M&L 4 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in walls.

M&L 4 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work in ceiling.

Plain fillet, square, rectangular or triangular in section, clean sawn exc 3 Sqcm sand not exc 6 Sqcm secured with nails.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed.

M&L for Cement Concrete Type D-2 1:4:8 (40mm graded aggragate) in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) all as specified and directed.

M&L 100mm thick Cement concrete type D-2, 1:4:8 (40 mm graded aggregate) all as specified and directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM (1:4) laid over and including 25mm thick PCC (1:2;4) type B0 using 12.5mm graded crushed stone aggregate, complete all as specified and directed.

Dismantling brick work or stone masonry built in cement mortar

M&L brick work with sub class' B' bricks of old size, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4.

M & L for rendering 15mm thick on stone masonry surfaces or other than fair faces of brick work or on one side of lathing in CM 1:4 finished over and smooth w/o using extra cement.

M & L applying two coats of cement based paint on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

All as per item above but plain sheet as in roof covering /cladding to wall fixed with tapping screws.

Taking down chowkhats or frame exe. 1.5sqm and n.exc. 4 sqm each with shutter (without taking out shutter).

Taking down chowkhats or frame not exc 1.5 Sqm each ( without taking off shutters from the frame).

M&L for second class soft wood plain, solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered, put together with glue penned and joints.

M&L 30mm thick 2nd class hard wood plain framed panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces.The size of rail and stile as per IS:1003 (Part1), kiln seasoned and chemically pressure treated, all as specified and directed.

M&L 30mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.

M&L 25mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.

M&L Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples.

S&F Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane.

S & F M. S. butt hinges 100mm long medium weight.

S & F 200mm long aluminum alloy, anodized barrel tower bolt of extruded section.

S & F 100 mm long aluminum alloy, anodized barrel tower bolt of extruded section.

S&F 300 mm long aluminum alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy.

S & F aluminum handles, cast type, anodized 150mm long.

S&F Aluminium handle, cast type, anodised 100 mm long.

M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths.

M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of old wooden surface exc 10 cm width or girths.

M & L for preparation of old wooden surface and appliying one coat of synthetic enamel point on Wooden Surface exc 10 cm width or girths.

M & L cements concrete 1:3:6 type C1 (using 20mm stone aggregate as in plinth protection), 75mm thick.

M&L Broken stone or Boulder hard core of guge in exc. 63mm deposited spread and levelled in layersn.exc 15cm thick watered and rammed to a true surface.

M&L 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base for chequred tiles complete all as specififed and directed.

M&L Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors.

Providing Cement Concrete Type B-1 1:2:4 (20mm Graded aggregate) , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed all as specified and directed.

Taking down cement plastering on lathing (other than wire-netting), without removing lathing, in cement mortar (one side only measured in cases where both sides are plastered).

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4, incl 5 mm thick setting coat , trowelled to even and smooth finish, incl top layer mix with water proffing compound, complete all as specified and directed Note : WPC will be paind seprately.

Supply Integral waterproofing compound for mixing with Cement plaster complete all as specified as per manufufacture instruction and all as directed by Engineer-in-Charge.

S&F 2 nd class Soft wood 20mm thick as in Clean sawn with butt joint Boarding, supplied & fixed with nails in any situation.

M&L 75 mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) as in floor complete all as specified.

M&L Cement concrete 1:3:6 Type C1 using 20 mm graded aggregate, cement concrete in roof kerbs or mud stops, rounded or chamfered on edgessurface channels and drains.

M&L brick work with sub class' B' bricks of old size, straight or curved on plan exc 6 m mean radius as in half brick wall built in cement mortar 1:4.

M&L applying one coat OBD plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

S&F Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete.

S&F Mild steel work Fe 410-W Gde Fe 250) Qulaity A, as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.

S&F Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members weight per square metre n.exc 4 Kg/Sqm all as specified and directed.

M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

S&F 1.25 mm Plain, black, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed).

M&L RCC 1:2:4 Type B1 (20 mm graded agg) Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses.

S&F TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

Excavating in Hard/dense soil as in post holes (or similar holes) each n.exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm.

M&L Cement concrete 1:3:6 Type C2 (40 mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Excavation in trenches not exc.1.5 mtr wide and not exc.1.5 m in depth for laying of pipes as in hard dense soil and getting out, complete all as specified and directed.

Returning, filling, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm in any type of soil, complete all as specified and directed.

Removing excavated material n.exc. 50m and depositing where directed at a level not exc 1.5 mtr above the starting point.

S&F 3-layer PP-R (polypropylene random copolymer) pipes 20 mm( Outer Dia) SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.

Supply and laying GI pipe galvanized, “Medium grade”, with all fittings 25 mm (1”) bore laid in trenches complete all as specified and directed.

Supply and laying GI pipe galvanized, “Medium grade”, with all fittings 40 mm (1.5”) bore laid in trenches complete all as specified and directed.

Supply and laying GI pipe galvanized, “Medium grade”, with all fittings 50 mm (2”) bore laid in trenches complete all as specified and directed.

Supply and fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 20 mm dia pipe complete all as specified and directed.

Supply and fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 40 mm dia pipe complete all as specified and directed.

Supply and fixing Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed for 50 mm dia pipe complete all as specified and directed.

Lagging on pipe of internal dia 20mm used in water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9843.

Float valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron /PPR pipe and fixed of size 20mm.

S&F installation of Centrifugal pump motor set 3 Phase of capacity 12.5 HP head range 55 metre discharge 500 LPM sync speed 2900 RPM complete all as specified and directed. Make : Kirloskar Model DB50/20 or equivalent.

S&F Star delta type motor starter (heavy Duty) ISI marked suitable for 12.5HP Motor 3 phase 415 volts AC 50 Hz. Make L&T/ABB/C&S/Bentex.

Cutting of existing DI/CI/GI/steel tubing for alteration or additions and insertion of Tee 100x100x50mm suitable for connection of GI pipe union, Nipple / socket all as specified and as directed.

Taking down copper/aluminium point wiring ( light fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing material to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) asd making good distribued surface of wall , floor etc complete all as specified and directed.

Point wiring for one light point/Ex/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead in and including cable 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab

Point wiring for 6A socket outlet independent point controlled by one switch with 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi strand cable and 1.5 sqmm PVC FRLS insulated un-sheathed copper conductor single core multi stranded cable (green color) as earth lead, 1100 volts grade including 25mm casing and capping (ISI marked) for one light/ fan point controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified.Make : Finolex/Anchor/Polycab

Point wiring for 16 Amps socket outlet/sheet metal enclosure independent with 4.00 sqmm PVC insulated un-sheathed copper conductor single core multi strand cable and 4.00 sqmm PVC insulated un-sheathed copper conductor single core cable (green color) as earth lead in and including 25mm PVC caping casing medium grade with all fittings (ISI Marked) controlled by one switch including CI/MS sunk box of required size, & as directed by Engr in Charge including 3mm thick plastic laminated top sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specified. Make : Finolex/Anchor/Polycab

M&L for LED Batten 1x20 W for regal batten for LED Universal batten for G 13 T with 18 W tube rods and Ultra bright LED Polycarbonate tube light very high efficiency suited for installation in existing T8 and connecting electrically using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed by Engineer-in-Charge.Make :Havells Batten Cat part No LHFYBYG21N1W020 and LED Tube Rod Cat part No LHLDCLXNUL8X018 or Equivalent.

Supply & fixing Switch piano type flush 6 Amp Single pole one way ( ISI Marked) complete all as specified and directed. Make : Havells/Anchor

Supply & fixing Switch socket combination 5 in 1, 6 and 16 Amp flush type universal controlled by one switch (ISI marked) complete all as specified and directed. Make : Havells/Anchor

Supply & Fixing Switch Socket 2 in1, 5 pin 6 Amps flush type universal controlled by one switch (ISI marked) complete all as specified and directed.Make : Havells/Anchor

Supply & Fixing ceiling rose surface backelite 65x50mm two to three terminal (ISI marked).Make : Havells/Anchor

Supply and fixing lamp holder bracket type, PVC/polycarbonate type with skirt cap suitable for batten fittings, complete all as specified and direted.Make : Havells/Anchor

Supply and fix LED Bulb 9 Watt . Make Havells/Bajaj

S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

Supply and fixing Aircirculating fan wall mounted, AC, single phase, 230 V, of size 400 mm sweep and connecting up including provision of cable from ceiling rose/ connector to fan. Make:- Havells/CG/Bajaj

Supply & fix sheet metal enclosure MCB distribution board. Single pole & neutral 240 volts 12 way with IP-43 IK-09 protection double door complete with appropriate size bus bar and neutral link, conf to Cat Pt No 6077 11 of Legrand or equivalent of make Hager/Merlin Garin fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specification .

Supply and fixing MCB SPN 40 to 63 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning.

Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathed of PVC tape overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4 mm suspension wire, one twin core cable of size 10 Sqmm complete all as specified and directed

S&F house service bracket (hook type) complete with 3.0m long G.I. pipe 40mm dia Med. grade, two nos 900mm M.S. hook and stay or guy complete all as specified and as directed by Engr-in-Charge.

M&L for submain wiring with two single core PVC FRLS insulated unsheathed flexible copper conductor cable of sze 2.5 sqmm and one single core PVC FRLS insulated unsheathed flexible copper conductor cable green colour of size 2.5 Sqmm as earth lead in & including PVC casing and caping ISI marked and making good the disturbed wall surfaces to match with existing specification all as required at site or directed by Engr-in- charge.

Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6.3cm thick burried directly in ground ( earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanised iron wire 4.0mm dia by means of bolts, nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test all as specified or indicated including testing on completion.

patriotic builders

M/S SAJAA CONSTRUCTION COMAPNY

M/S ASMATULLAH SHAH

Bidder Name

M/S AB AHAD RATHER

M/S SAJAA CONSTRUCTION COMAPNY

patriotic builders

M/S ASMATULLAH SHAH