Improvement work by arresting the seepage water in tail end of Conveyor 48 A1 and 48 B1 at ground floor of Primary Crusher House 2 at ICHS area

Amount

Dismantling the existing RCC for the required width & depth as per the instructions of engineer in charge and disposing the debris 1 Km. away from the site including cost of all materials, labours, lead, lift, curing, etc. complete.

Drilling 18mm Dia holes in RCC surface ,supplying and fixing of 300mm long 15mm PVC Pipe into the hole using lock fix with Rendroc Plug and piugging the grout nipple Rendroc RG including including cost of materials, labour, lead, lift, etc., hire charges for drilling machine etc., complete.100mm length PVC pipe to be protred outside for enabling grouting (Power supply will be provided at free of cost for the equipment at one point closer the working area)

Preparing cement slurry with non-hrink expandaple grout admixture CEBEX 100 @ 225gm per bags of cement and bonding agent NITO BOND SBR, acrylic emulsion cement modifier to get pumpable consistency and injecting the prepared slurry into the pre fixed nipple using 40PSI hand operated grout pump and refusal of same including cost of cement chemicals labour charges T&P lead lift etc., complete.

Supplying and laying HDPE Sheet for water proof 0.5mm thick over the existing surface including cost of all materials, all labour charges,all lead & lift, etc., complete

Providing shuttering arrangements for supporting the Reinforced cement concrete surfaces rate including cost of all labour , lead, lift, tools etc., complete

Providing RCC 1:1.5:3 using OP/PP cement with 12 to 20mm machine crushed HBG metal including cost of all materials, labours, lead, lift, curing, etc. complete - excluding cost of reinforcement and form work.

Providing out the damaged joints of the existing damaged floor/ terrace tiles carefully and repointing with CM 1:3 mixed with water proof compound @ 1kg/bag of cement including cost of all labour lead lift T&P curing etc complete.

Supplying & providing RTS /MS Rod including cutting, bending, tying & fixing in position as per specification including binding wires, cost of all other materials, labours, lead, lift, curing etc., complete

Supplying and fabricating and forming in position of the new angle, channel & beam as directed carefully without any distrubane to other steel structure rate including cost of all materials, hire charges for welding and cutting machine, welding rods including labour, lead, lift safety appliances etc., complete

Providing two coats of anticorrosive black paint over one coat of primer including cost of all materials, labour, lead, lift, etc., complete.

Epoxy painting on steel structures using one coat of protective coating of self priming epoxy primer (DFT100+5%MICRONS),ONE COAT SMALL OF EPOXY MIO PAINT (DFT 75+5% MICRONS),one coat of Epoxy HB coating (DFT100+5% MICRONS)and polyurethane paint (DFT35+5% microns per coat)for a total 310+5% microns,using different shades after thorough scrapping with emery sheet with manual labour and as per direction of the engineer in charge the rate including cost of materials, labour, scaffolding, lead, lift, etc., complete

KAMATCHI INDUSTRIAL SERVICE