SPECIAL REPAIRS TO BUILDING NO P3 SINGLE OFFICERS LIVING ACCOMMODATION BLOCK OF NAVAL DETACHMENT UNDER GE NORTH BANGALORE

Amount

Taking down of existing Water Proofing treatment of any type (APP Membrane, Cement or earthen tile,Mud phuska or lime concrete) including cement plaster of any thickness and removing bitumen coating/mud pushka dirtsetc over original RCC roof slab by grinding, Picking, sweeping clean and washing down with water to remove dust & to providing water prooling treatment complete. Note : Rate includes for removing debris outside defence land

M&L providing cement concrete type B0 1:2:4 (12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, leveling concrete for Roof slab, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as including demolition & removal of cement concrete from the MD land of any description and in any position not otherwise specifically provided for complete all as specified and as directed. directed

M & L for providing screed bed/rendering 10mm thick in CM (1:3) mixed with and including supply of approved water proofing compound as per manufacturers instructions by removing all loose gravel, dirt, oil, grease and foreign materials by jet or dry air, cleaning the surfaces mechanically or by grinding to make it smooth and applying APP modified water proofing membrane as per IS 1654-2017/IS 16352-2017 , 3mm thick and weighing not less than 3.60kg/Sq m reinforced with non woven polyster/HMHDPE matt black finished over compatible primer/bonding bitumen @ 0.40 Litre/Sq m and torch applications of membrane with 75mm side overlap and 100mm end lap after necessary preparation of surface complete as per manufacturer's instructions and applying a coat of solar reflective bituminous aluminum paint on top @ 0.10 litre/sq m complete all as specified and directed.

Disconnecting existing tanks, setting aside including necessary connections (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately).Capacity in litres Exc 250 & n exc 500

Disconnecting existing tanks, setting aside including necessary connections (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing etc. measured separately).Capacity in litres Exc 500 & n exc 1000

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes, cables, pipeline etc not exceeding 10 sqm on plan and not exceeding 1.5m depth in hard / dese soil etc complete all as specified and directed

Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed

Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

Taking down cement plaster of any description including racking out joints, hacking for key and disposal of debris to out side MD land all as specified and as directed.

M&L for Rendering 15mm thick in CM 1:6 on brick or concrete surfaces , finished even and smooth with out using extra cement.(Internal Surfaces)

M&L for Rendering 5 mm thick in CM 1:3 on ceiling surfaces , finished even and smooth with out using extra cement.

M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:4 with WPC, finished plastered surface even and smooth without using extra cement (External Surfaces) Note :- WPC will be measured and paid separately

Supply only liquid water proofing compound

Preparation of new plastered surfaces and applying three coats of white wash on ceilings including in narrow widths/ bands etc complete all specified and as directed.

M & L for Preparation of newly plastered surfaces and applying two coats of oil emulsion distemper over one coat of primer over one coat of 1 mm thick wall care putty on plastered surfaces of walls including in narrow widths/ bands etc complete all specified and as directed.

M & L for Preparation of newly plastered surfaces of wall/chajjas etc and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint (Apex Ultima or equivalent brand as specified in CA) over a coat of weather proof primer including filling the minor cracks etc with crack filling material all as per manufacturers instructions complete all as specified and as directed.

M & L for 500 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including 20 mm dia ball valve and fittings including dismantling existing water storage tank, complete all as specified.

M & L for 1000 litres capacity rotational moulded, triple layer polythene water storage tanks (cylindrical vertical with closed top) hoisting and fixed in position on roofs including 25 mm dia ball valve and fittings including dismantling existing water storage tank, complete all as specified.

S & F in repairs 25mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed.(Minimum weight 25 mm - 455 gms all as specified and as directed.

Supply & laying 20 mm outer dia CPVC pipes SDR 11 (Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors including all fittings and specials including taking down 15 mm GI tubing and connections complete all as specified.

Supply & laying 25 mm outer dia CPVC pipes SDR 11 (Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors including all fittings and specials including taking down 20 mm GI tubing and connections complete all as specified.

S&F in repairs 20mm CPVC gate valves, with lever, screwed both ends for iron pipe and fixed

S&F in repairs 25mm CPVC gate valves, with lever, screwed both ends for iron pipe and fixed

Taking down chowkat (without taking of shutter from the frame) not exc 1.5 sqm each including making good the disturbed surface in PCC 1:2:4 type B0 or CM 1:3 all as specified and directed

All as per Item No 24 above, but exc 1.50 sqm and not exc 4.00 sqm each

Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each all as specified and as directed

S&F Solid PVC door frame (Single rebated) of size 60 mm x 30 mm made out of solid foam with homogenious fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) complete all as specified and directed

M & L for Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing with wood free EPS .

S&F 2nd class hard wood plain, solid, straight chowkats and frames, clean sawn, frame rebeated on the solid, rounded or chamfered, put tegether with glue pinned at joints etc complete all as specified and as directed

S&F Flush door shutters 35mm thick, factory made as per IS:2202 (Part-I 1999) solid core construction, with block board core with decorative face veneer both faces with lipping/frame to match as per drawing fixed to chowkhats all as speified and directed

S&F 2nd class hard wood 35 mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) kiln seasoned and chemically pressure treated complete all as specified and as directed. Note: Supply only 4 mm thick sheet glass and wire mesh be measured and paid separately.

S & F Plain framed, panelled shutter (two panel) of 35mm thick with lock rail and panel of 9mm BWP commercial ply or 12mm venereed particle board with commercial veneering on both faces. rail and style are of 2nd class hardwood & The size of rail and stile as per IS:1003 (Part-I), kiln seasoned and chemically pressure treateds fixed to chowkhat all as specified and as directed.

S&F for mild steel work as in hold fast made in flat iron all as specified and as directed.

M & L for powder coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified )

M & L Powder coated aluminium section (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. Note: Supply only 4 mm thick sheet glass and wire mesh be measured and paid separately.

S&F Anodised aluminum powder coated (of any shade / colour as approved by GE) ventilators with adjustable 4mm thick figured glass louvers, fixed in half portion, without sash bars, aluminum section weighing not less than 0.55 kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, including stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.18mm including complete etc all as specified and directed by the Engineer-in-charge (Size of Ventilators = 600x900 mm)

S&F power coated (minimum coating 50 micron) aluminium Deco grill of No DG-104 as per drg No TD-531 sheet 1/1, (minium thickness 6 mm) shall be reveted to panel of frame using U channel, complete all as directed.

Supply only Sheet glass 4mm thick ordinary quality and glazing with oil putty or in wooden /steel /aluminium /rubber beading in square not exceeding 0.5 Sqm in each pane and all as specified.

Supply & fix Sheet glass 4mm thick ordinary quality and glazing with oil or in wooden /steel /aluminium /rubber beadingputty in square exceeding 0.5 Sqm in each pane and all as specified.

Supply & fix stainless steel wire cloth 0.36mm nominal dia and average width of aperture 1.40mm and fixed with tinned tack or galvanized wire staple all as directed fixed.

M&L preparing new wooden surface of any description, not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed

S & F Butt hinges stainless steel 100mm long and fixed to door frame and shutter duly welded/screwed complete all as specified and as directed

S & F Butt hinges medium weight, cold rolled mild steel 100mm long and fixed to door frame and shutter duly welded/screwed complete all as specified and as directed

S&F Aluminium anodised tower bolt 150mm long of extruded section etc complete all as specified and as directed

S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed

S&F 125 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed

S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed

S & F 140 mm floor door stopper of aluminium alloy powder coated, with hard down steel spring all as specified and as directed.

S&F mild steel 300mm, ordinary rat tail rod pattern springs, including roller and roller plate complete

Demolition of cement concrete and paving not exc 15 cm thick (below or above ground level) complete all as specified and as directed.

M & L cement concrete type B0 1:2:4 (12.5 mm graded stone aggregate) 25mm thick finished even as in levelling concrete for floor.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and as directed by Engr-in-Charge

Demolition of cement concrete reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

M&L for Precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed. Note: Reinforcement will be measured and paid separately.

S&F Mild Steel TMT bar 6 to 8mm dia cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

M & L providing 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in subbase/plinth protection.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

M&L for cement concrete 1:2:4 type, B0 using 12.5mm graded stone aggregates as in copings, fixing of post/ Chajja kerbs, roof padding/staging of water tank etc including necessary fromwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed

M&L Extra for forming fair finished drain or channel 15/20/30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing rubbish off from premises.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes all as specified and as directed.

M&L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl Screed bed or bedding layer of mortar 15 mm thick in CM 1:4 for laying floor finishes all as specified and as directed.

M & L Glazed ceramic coloured tiles in vertical surfaces 350 x 250x 7 mm/ 450 x 350 x 7 mm/ 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over & incl 10mm thick in screed CM 1:4 on brick work or concrete surfaces to receive wall tiles all as specified and as directed.

M&L for chequered cement concrete tiles 300 x 300mm x 25mm thick, set, jointed and pointed in neat cement slurry with grey pigment cement and pigment, including Screed bedding layer in cement mortar 1:6, 20mm thick, in flooring, complete all as specified and as directed .

S&F in repair Vitreous China wash basin, white, flat back, size 550x400mm including chromium plated fancy type mixer taps,32 mm dia CP waste coupling, 2 No. 450 mm long PVC connection & brackets including cutting for and pinning in ends of brackets or erecting stand but including of fixing & supply.

S&F in repair Vitreous china wash down water closet pan (pedestral Pattern) white, (Including flushing cistern and flush pipe) , including connection to drain & or out going pipe) and to flushing pipe, anti syphonage pipe, seat and cover for pedestral pan including PVC flushing cistern of 10 litre capacity and 450 mm long PVC connection etc. complete all as specified and as directed

S&F 15mm stop valves / angle valves cast copper alloy, screwed down, high pressure, fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed in repairs.

S&F in repairs Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed."

S&F in repairs Brass CP wall mixer for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.

S & F chromium plated long body bib tap 15mm dia with CP flange as fixed in repair all as specified and as directed.

S&F chromium plated 15mm dia with CP flange two way bib cock with angle valve combination all as specified and as directed.

S & F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position in all respect as specified.

S&F125mm dia brass chromium plated shower rose with swivel joints fixed in repairs .

S & F in repairs 20 mm dia 600 mm long D type Towel rail stainless steel glossy finish complete all as specified and as directed.

S&F in repairs Soap dish chromium plated brass all as fixed in wall as per manufacturers instruction.

S & F in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with slvent cement all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry, Type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar 1:6 , complete etc complete all as specified and as directed

S & F 75 mm dia bore PVC (SWR) pipes type 'B' single socketed in any length with rubber ring joints fixed to walls including necessary fittings all as specified and as directed.

All as per item No 82 above but 110 mm dia.

S&F in repair 75mm dia PVC (SWR) Bends with access door of any radious

All as per item No 84 above but 110mm dia

M & L for Complete removal of existing treatment on ceiling of any description over 10cm girth or width and applying three coats of white wash on ceilings including in narrow widths/ bands etc complete all specified and as directed.

M & L for Complete removal of existing treatment on ceiling of any description over 10cm girth or width and applying two coats of oil emulsion distemper over one coat of alkali resistant primer on ceilings including in narrow widths/ bands etc complete all specified and as directed.

M & L for Complete removal of existing treatment on walls of any description over 10cm girth or width and applying two coats of oil emulsion distemper over one coat of alkali resistant primer over one coat of chalk 1 mm thick wall care putty on plastered surfaces of walls including in narrow widths/ bands etc complete all specified and as directed.

M & L for Complete removal of existing treatment on wall of any description over 10cm girth or width and applying three coats of white wash on wall including in narrow widths/ bands etc complete all specified and as directed.

M&L for preparing new plastered surface of wall and applying three coat of white wash etc complete all as specified and as directed

M & L for Complete removal of existing treatment on wall surfaces chajjas etc of any description including brooming down with steel wire brushing, scrapping down smoke soot's , moulds, moss and efflorescence, salts, trading oil and greasy spots etc and applying two coats of Anti fungal weather proof grade exterior acrylic emulsion paint of approved tint (Apex Ultima or equivalent brand as specified in CA) over a coat of weather proof primer including filling the minor cracks etc with crack filling material all as per manufacturers instructions complete all as specified and as directed.

Preparation of old painted surfaces and applying two coat of synthetic enamel paint on wood and wood based surfaces over 10cm width or girth all as specified and as directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 200 mm internal dia of pipe complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for laying DWCP 200 mm dia pipes in trenches Class SN-4 conforming to IS 16098 (Part -2) in 6 mtr length with coupler complete all as specified and directed by Engr-in-charge

Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge.

M&L point wiring complete with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit medium grade ISI marked incl accessories concelaed type wiring incl GI/ MS branded sunken boxes of suitable module concealed on walls including modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular type switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.for the following One light/TV/Phone/bell point controlled by one switch

All as per item No. 97 herei-in-before but for One fan/Exhaust point controlled by one switch/regulator

All as per item No. 97 herei-in-before but for One 3 pin socket out let 5 A on independet board

All as per item No. 97 herei-in-before but for One 3 pin socket out let 5 A on same board

All as per Srl item No 97 here-in-before but for 16 Amps socket outlet by using 2.5 Sqmm PVC insulated unsheathed copper conductor multi stranded on independent board including provn of 2.5 Sqmm PVC insulated solid copper conductor continus as earth wire Note for Item No 97 to 101 :- (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring. (iv) Cost of cutting chases in walls and making good for concealed wiring is included in unit rate quoted.

S&F in replacement of ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed

Supply and Fix in repair Modular switch 1 way 6A,1 module

Supply and fix in repair Modular switch 1 way 16A, 1 module

Supply and Fix in repair Modular Bell push 6A 1 module

Supply and fix in repair modular Socket, 6A - 2/3 pin combined 2 module

Supply and fix in repair modular Socket 6A/16A - 2/3 pin combined 2 module,

Supply and fix in repair modular type Fan step regulator, 120W - 2 module

S&F in repair LED batten suitable for indoor applications 18/20 Watts, 4 feet with extruded aluminium housing & integrated LED channel rectangular white arcylic cover complete with all accessories all as specified and directed. Make: Bajaj, Cat No.BCLAB 18 WH LED P or equivalent Makes & model of CA.

S&F in repair LED batten suitable for indoor applications 10 Watts, 2 feet with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No.BCLSB 10 WH or equivalent make of CA.

S&F Angle holder PVC/polycarbonate type all as specified and as directed.

S&F LED lamp suitable to fit in angle holder of capacity 09 watt. Make: Bajaj or eqv in Philips/Havells/CG.

M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed incl dismantling taking out old u/s.

S&F in replacement of MCB DB TPN 4 way suitable for MCB TPN as I/C with double door type 415 volts with 200 Amps rated busbar for housing MCBs as specified and as directed.

S&F in replacement of DB SPN 8 way double door type 240 volts with 200 Amps rated busbar as specified and as directed. CSDBSPNPCGDD06 of crompton or equivalent In Indoasian / C&S / Havells

S&F in replacement of DB SPN 12 way double door type 240 volts with 200 Amps rated busbar as specified and as directed. CSDBSPNPCGDD12 of crompton or equivalent In Indoasian / C&S / Havells

S&F in replacement of MCB TPN 415 volts, 10KA 'C' curve 63 Amps complete all as specified and as directed

S&F in repair MCB single pole 240 volts 5 to 32 Amps complete all as specified and as directed

S&F in repair RCBO SPN 240 volts 32/40 Amp 2 Pole (4 Module) complete all as specified and as directed CSRCBO2PC40A30-10 KA of crompton or equivalent In Indoasian / C&S / Havells

Removing of old existing and provision of new sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 4 Sqmm along withone run of 4 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor run along with suitable size of PVC concealed type conduit all as specified and as directed Note: (i) 3 runs of cable & one runs PVC conduit will be measured as unit length. (ii) Cost of cutting chases in walls and making good for concealed wiring is included in unit rate quoted.

Taking down ceiling fan, dismantling blades cleaning and greasing and refixing of the same.

S&F Exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louvers fixed outside with all accessories and fixing the exhaust fan from ceiling rose with 3 core flexible copper wire 24/0.20 sqmm , etc all as directed. Make : Bajaj cat No : 70069, MAXX AIR or equivalent in Make of Havells/CGs/ Orient

S&F in repair LED street light fittings with pressure die cast housing with toughned glass, IP-66 protection etc of 90W LED Street Light Fixtures. Make : Bajaj Model No (BRTFG 90W LED I V2) or equivalent make of Havells / CG / Philips

S&F in repair of FRP cable looping boxes of size 240mm x 130mm x 110mm with PVC sheet finish inside including MCB SP 1 No 6 Amps, heavy duty PVC connector 4 way Terminal strip 01 No & fixed to pole with suitable size clamp with nuts,bolts complete all as directed. Make Sintex ot equivalent

S&F Bracket made out of GI tubing medium grade 40 mm bore, approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm, nuts, bolts, washers etc and including before fixing applying two coats of aluminum paint over a coat of red oxide primer including removing the old existing GI bracket from bldg/pole complete all as specified and directed.

S & F Bell push,modular type, 5 amps.

S & F Buzzer, Ding dong AC, 230 volts, single pole.

Supply and fixing of in replacement of Single pole & neutral enclosure 20 Amps & 240 V with two pin and earth plug and socket complete with one single pole MCB 20 Amps.

S&F in repair GI tubing medium grade 50 mm bore with all fitting laid in trenches/walls.

S&F in repairGI tubing medium grade 25 mm bore with all fitting laid in trenches/walls.

S&F in repair Gun metal Gate valve of size 25 mm dia with iron wheel.

S&F in repair Gun metal Gate valve of size 50 mm dia with iron wheel.

S&F in repair Float valve of size 20 mm dia with PVC body aluminium float rod, nylon float high pressure type

M&L Construction of Valve pit chamber of size 600 mm x 600 mm x 600 mm internal dimension brick/stone construction including all excavation and earth work in any type of soil, returning, filling in disposal of surplus soil to a distance not exc 50m and depositing were directed, PCC foundation of the mix (1:2:4), type D-2, brick masonry including plastering, rendering 12mm thick in cement mortar (1:4) internally finished even and fair and flush pointing externally as the work proceeds in same mortar and suitable size angle frame with mild steel angle iron 40X40x6mm, MS sheet cover 3 mm thick with handle and locking arrangements and painting all steel surfaces with two coat of synethic enamelled paint over a coat of red oxide primer and painting all the MS embeded in PCC with two coats of black bitumenous paint as approved, complete all as specified and directed incl dismantling taking out old u/s.

M&L XLPE insulated, sreened, PVC bedded, galvanised steel strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 votls grade, cross sectionl area 35 Sqmm, 3.5 core laid in trenches incl taking out old u/s cable. Make : Havells.

M&L for sand cushioning with a layer of M-sand 23 cm thick under and above the cable complete all as specified and as directed. Note: Punned thickness will be measured for payment.

S&L burnt bricks for cable protection complete as specified as directed.

M&L In repair for GI tubing light grade 50mm with all accessories for cable protection fixed on poles / bldgs / laid in trenches incl necessary MS clamps, bolts and nuts etc all as specified and as directed.

Supply, installtion, testing commisioning of LT panel, out door type, platform mounted, totally enclosed, dust and vermin proof, openable from both front and rear side, made out of 3.15 mm thick CRCA sheet complete including inner chambers/partitions to mount the following electrical accessories and built upon 50x50x6mm angle iron frame work, having front & rear hinged doors, lifting lugs (2 Nos), provision for earth strip connection, bottom detachable gland plates, connecting using suitable size of zinc plated and passivated nut, bolts and washers. The cabinet & all members should be chemically treated with anti-corrosive chemicals and apply spray paint with two coats of synethetic enamel paint over a coat of red oxide primer. The internal connection of MCCB should be provided with Al strip of suitable size and necessary grouting/ foundation all as required at site and comprising following:-(Panel) incl dismantling of old panel. BUS BAR - Aluminium bus bar system of capacity 200 amp four pole duly colour coded directed incl dismantling taking out old u/s. INCOMER - MCCB, 4 pole of capacity 100 amps with breaking capacity of 35 KA . - 01 No. Outgoing MCCB, 4 pole of capacity 63 amps with breaking capacity of 25 KA . - 03 No. Digital multimeter of size 96x96 sqmm - 01 No Timer switch forswitching ON/ OFF Street light daily astronomical calculation of sunrise / sunset timesbased on intered loc or loc coordinates. Nos-01 Phase Indicator Lamp RYB with sheds LED Type - 01 Set of three

M/s BHOOMI ELECTRICALS (BID ID -3367733)

Lakkaiah Rangaswamy (BID ID -3375554)

SRI GANESH ENTERPRISES (BID ID -3367681)

S S BUILDERS (BID ID -3376172)

OM CONSTRUCTIONS (BID ID -3374924)

M/s GM Constructions (BID ID -3367685)