Providing Consolidated Development works for the Construction of 20 Nos. of AC, 40 Nos. of INS and 80 Nos. of SI Quarters (Stilt plus 10 floors) at Ganapathy east, Gandhipuram in Coimbatore City. (Group-I, II)

Earth work excavation in Soft disintegrated rock (including refilling) a. 0 to 2 mt

b. 2 to 3 mt.

Earth work excavation for Open foundation (excluding refilling) a) 0 to 2 mt.

Supplying and filling stone dust

Plain cement concrete 1:5:10 (One of cement, five of crushed stone sand and ten of hard broken stone Jelly including Mortar Plasticizer (Liquid) at 200ml per bag) for foundation and basement using 40 mm gauge hard broken stone jelly

Standardised concrete Mix M25 Grade concrete. (using crushed stone sand) including plasticizer b) In stilt / Ground Floor

Brick work in Cement Mortor 1:5 (One of cement and five of crused stone sand) using Flyash bricks of size of size 9”x4¼”x2¾” (23x11x7cm) in foundation and basement

Finishing the top of flooring with cement concrete 1:3 (One of cement and three of blue granite chips of size 10mm and below) 20 mm thick Ellispattern Flooring (No Sand)

Supplying and laying of Rubber Moulded Hydraulic Pressed Paver Block incl.Cost of Material and Labours Etc., b.83mm thick Paver block

Providing Form work and centering for reinforced cement concrete works a) For Column footings, plinth beam, Grade beam, Raft beam, Raft slab etc.,

b) Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase waist, portico slab and other similar works

d) For Vertical wall

f) For Curved surface

Plastering with CM 1:5 (One of cement and five of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm thick

Plastering in cm 1:3 (one of cement and three of crushed stone sand (One of cement and three of crushed stone sand including Mortar Plasticizer (Liquid) at 200ml per bag) 12mm tk. mixed with water proof compound at 2%

Painting the New walls with two coats of approved best ready mixed exterior emulsion paint outer walls in addition to one coat of approved primer coat

Supplying, fabricating and placing in position of Mild steel Grills / Ribbed Tor Steels (without cement slurry)

C.I. Steps ( 5 kg)

S & F of C.I Manhole cover 60 x 60 cm (50kg weight )

Drilling of (150mm) vertical bores in hard rock area to any required depth as desired by TNPHC officials including labour charges for grouting the casing pipe after inserting the casing pipe in the drilling hole etc., a) upto 150 mtrs depth below GL

b) From 151 mtrs upto 180 mtrs depth below GL

c) From 181 mtrs upto 210 mtrs depth below GL

Reaming from 150mm dia pilot bore to 300mm dia bore as directed by the departmental officer’s up to 60m depth ending from ground level. a.From 0 m upto 60 m Depth ending from ground level

b.From 60 m upto 90 m Depth ending from ground level

c.From 90 m upto 120 m Depth ending from ground level

d.From 120 m upto 150 m Depth ending from ground level

e. From 150 m upto 180 m Depth ending from ground level

f. From 180 m upto 210 m Depth ending from ground level

Supply and delivery of 150mm OD of PVC casing pipes (6kg/cm2) as per IS 12818 /1992 of approved quality for borewells with average wall thickness of 6.1mm

Supply and delivery of 150mm OD of PVC casing pipes (6kg/cm2) as per IS 12818 /1992 of approved quality for borewells with average wall thickness of 6.1mm a.150mm dia casing pipes assembly

Supply and fixing of PVC 160mm dia top end cap of approved make 6.1mm thick with inner thread etc

Supply and delivery of required size of the Nylon Rope for Bore-well including cost of materials and labour charges etc.

Supply and fixing of following dia GI Specials of best approved quality,with ISI mark including cost and conveyence and fixing in position etc., XIII.c. 150mm dia MS clamp sets

Supply and delivery of clear water vertical wet type submersible pumpset suitable for 150mm dia borewell of following capacity m.50 lpm x 175 m

Supply and delivery of Open well Submersible pump set conforming to IS 14220 /2002 without Panel Board of following capacity n.75 lpm x 125m

Labour charges for the erection of submersible pumpset in Borewell/open well including fixing and jointing submersible cable with proper clamps upto the starter

Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 DOL panel control board

Supplying and laying 3 core 4 sqmm FLAT COPPER CABLE with ISI mark including cost of all materials specials etc.

Supply and delivery of following dia UPVC pipe in to the borewell a) 50 mm dia

Supply, laying, fixing and jointing the following UPVC pipes as per ASTM D-1785 of schedule (Below Ground level) c.50mm dia

Supply, laying, fixing and jointing the following UPVC pipes as per ASTM D-1785 of schedule (Above Ground level) a.32mm dia

b.40mm dia

Supply and laying flat cable for Below ground level d.25mm dia GI Pipe `B` class

c.100mm dia GI Pipe `B` class

Supplying and laying of following dia GI including Labour charges for cutting threading and jointing G.I pipes with necessary specials in above ground level a. 50mm dia GI pipe

c. 40mm dia GI pipe

d. 25mm dia GI pipe

Supplying and delivery of following dia of G.I / brass specials f) 50mm dia GM Non return valve

Supplying and fixing of following plumbing fittings Confirming to I.S Specifications b) 20mm dia Brass ball float valve

c)25mm dia Brass ball valve

d) 32mm dia Brass ball valve

e)40mm dia Brass ball valve

f) 50mm dia Brass Ball valve

Supply and fixing of following dia GI Specials of best approved quality,with ISI mark including cost and conveyence and fixing in position etc., f. 50mm dia GI Bend

f) 50mm dia GI union

f)50mm dia GI Hex nipple

j)50mm dia GI MTA

Supply, delivery and laying of RCC Hume pipe of 300mm dia

Supply and fixing of SS Swan Neck Tap including cost of material, cost of labour charges for fixing etc

Supply and fixing of Concealed Stop cock including cost of material, cost of labour charges for fixing etc.

Supplying and fixing of ( Jaquar or Equilavalent) Wall Mixer SOL 6273upr Wall Mixer with provision for overhead shower with 115mm long bend pipe on upper side , connecting legs& wall flanges With all fitings etc

HDPE water tank following liters capacity with ISI mark c. 1000 lit

Supply and delivery of 3HP 3 Phase High Pressure SS Multistage Openwell Sub x 2Nos (Pressure Pump) Max Head : 60Mtrs Max flow : 15000LPH/ Pump

Supply and Fixing of CP two way bib cock with health faucet

Supply and delivery at site and fixing of SFRC manhole cover with frame with locking arrangement c. 750mm x 750mm

d. 900mm x 900mm

Supplying and fixing of 16 SERVICE EB METERING PANEL TYPE OF PANEL: INDOOR FLOOR MOUNTING SINGLE FRONT. CONSTRUCTION Panel Frame : 1.6 MM Gland Plate : 1.6 MM Doors & Covers : 1.6 MM CABLE ENTRY : BOTTOM DEGREE OF PROTECTION : IP - 42 Degree Of Protection OVERALL DIMENSION : W-2760mm, H-2080mm , D-235mm BUSBAR

Supplying and fixing of SI QUARTERS COMMON PANEL TYPE OF PANEL: INDOOR WALL MOUNTING SINGLE FRONT. CONSTRUCTION Panel Frame : 1.6 MM Gland Plate : 1.6 MM Doors & Covers : 1.6 MM CABLE ENTRY : BOTTOM DEGREE OF PROTECTION : IP - 42 Degree Of Protection OVERALL DIMENSION : W-1880mm, H-1045mm , D-300mm BUSBAR

Supplying and fixing of PUMP PANEL TYPE OF PANEL: INDOOR WALL MOUNTING SINGLE FRONT. CONSTRUCTION Panel Frame : 1.6 MM Gland Plate : 1.6 MM Doors & Covers : 1.6 MM CABLE ENTRY : BOTTOM DEGREE OF PROTECTION : IP - 42 Degree Of Protection

Supplying and fixing of 14 SERVICE EB METERING PANEL TYPE OF PANEL: INDOOR FLOOR MOUNTING SINGLE FRONT. CONSTRUCTION Panel Frame : 1.6 MM Gland Plate : 1.6 MM Doors & Covers : 1.6 MM CABLE ENTRY : BOTTOM DEGREE OF PROTECTION : IP - 42 Degree Of Protection OVERALL DIMENSION : W-2485mm, H-2080mm , D-235mm BUSBAR

Supplying and fixing of 12 SERVICE EB METERING PANEL TYPE OF PANEL: INDOOR FLOOR MOUNTING SINGLE FRONT. CONSTRUCTION Panel Frame : 1.6 MM Gland Plate : 1.6 MM Doors & Covers : 1.6 MM CABLE ENTRY : BOTTOM DEGREE OF PROTECTION : IP - 42 Degree Of Protection OVERALL DIMENSION : W-2210mm, H-2080mm , D-235mm BUSBAR

Supplying and fixing of 10 SERVICE EB METERING PANEL TYPE OF PANEL: INDOOR FLOOR MOUNTING SINGLE FRONT. CONSTRUCTION Panel Frame : 1.6 MM Gland Plate : 1.6 MM Doors & Covers : 1.6 MM CABLE ENTRY : BOTTOM DEGREE OF PROTECTION : IP - 42 Degree Of Protection OVERALL DIMENSION : W-1905mm, H-2080mm , D-235mm BUSBAR

Supplying and fixing of INS QUARTERS COMMON PANEL TYPE OF PANEL: INDOOR WALL MOUNTING SINGLE FRONT. CONSTRUCTION Panel Frame : 1.6 MM Gland Plate : 1.6 MM Doors & Covers : 1.6 MM CABLE ENTRY : BOTTOM DEGREE OF PROTECTION : IP - 42 Degree Of Protection OVERALL DIMENSION : W-1880mm, H-1045mm , D-300mm BUSBAR

Supplying and fixing of GA FOR AC COMMON PANEL TYPE OF PANEL: INDOOR WALL MOUNTING SINGLE FRONT. CONSTRUCTION Panel Frame : 1.6 MM Gland Plate : 1.6 MM Doors & Covers : 1.6 MM CABLE ENTRY : BOTTOM DEGREE OF PROTECTION : IP - 42 Degree Of Protection OVERALL DIMENSION : W-2055mm, H-1045mm , D-300mm BUSBAR

Supplying and fixing of AC PUMP PANEL TYPE OF PANEL: INDOOR WALL MOUNTING SINGLE FRONT. CONSTRUCTION Panel Frame : 1.6 MM Gland Plate : 1.6 MM Doors & Covers : 1.6 MM CABLE ENTRY : BOTTOM DEGREE OF PROTECTION : IP - 42 Degree Of Protection OVERALL DIMENSION : W-2405mm, H-1045mm , D-300mm BUSBAR

Supply,Laying ,Testing,Commisioning Of 1100V Grade With Confirmity With IS:7098 FRLS XLPE / PVC LT UG ALU Armoured Cables.The Cables Shall be Laid in Existing Constructed Trenches / Cable Trays / Hume Pipes / PVC Pipes / Directly Buried Underground. a.4 Core X 185 Sq.mm.UG Alu Armoured Cable

b.4 Core X 120 Sq.mm.UG Alu Armoured Cable

c.4 Core X 50 Sq.mm.UG Alu Armoured Cable ( Pump Panel )

d.4 Core X 35 Sq.mm.UG Alu Armoured Cable

e.4 Core X 25 Sq.mm.UG Alu Armoured Cable

f. 4 Core X 16 Sq.mm.UG Alu Armoured Cable

Supply,Installation of Chrome Plated Brass Single Compression Glands in Following Sizes in Various Cables. a.4 Core X 185 Sq.mm.UG Alu Armoured Cable gland

b.4 Core X 120 Sq.mm.UG Alu Armoured Cable gland

c.4 Core X 50 Sq.mm.UG Alu Armoured Cable gland

d.4 Core X 35 Sq.mm.UG Alu Armoured Cable gland

e.4 Core X 25 Sq.mm.UG Alu Armoured Cable gland

f.4 Core X 16 Sq.mm.UG Alu Armoured Cable gland

Supply and Installation of LT Cable end Termination for Suitable Aluminium / Copper Lugs in Following Sizes in Various Cables. a.4 Core X 185 Sq.mm.UG Alu Armoured Cable

b.4 Core X 120 Sq.mm.UG Alu Armoured Cable

c.4 Core X 50 Sq.mm.UG Alu Armoured Cable

d.4 Core X 35 Sq.mm.UG Alu Armoured Cable

e.4 Core X 25 Sq.mm.UG Alu Armoured Cable

f.4 Core X 16 Sq.mm.UG Alu Armoured Cable

g. 70 Sq.mm End Termination ( Copper Lugs )

Supply,Erection,Commisioning of Wall Mounted Powder Coated MS Enclosure Box With 4 Pole R,Y,B&N Terminal & FRP Supports With Front Cover.

Supply,Instalation Of 2mm Thick HRCA Sheet Steel Hot Dip Galvanized The Side Rail Size of 50mm Height with 2mm Thickness & 2mm Thickness Rungs in Recomanded Intervel. a.250x50x2mm Cable Tray

b.500x50x2mm Cable Tray

c.750x50x2mm Cable Tray

Supply, installing, testing and commissioning of GI Plate Earthing station including Excavation,back filling using 600 x 600 x 5mm GI Plate Complete with 40mm dia GI Pipe 3 Mtrs Long With funnel arangements..etc

Supply,installing,testing and commissioning of Copper Plate Earthing station including Excavation,back filling using 600 x 600 x 3.15mm Copper plate Complete with 40mm dia GI Pipe 3 Mtrs Long With funnel arangements..etc

Supply,installing,testing and commissioning of 80mm Copper Bonded Pipe in Pipe Tecnology Earthing For Lightning Arrestor With Recommended Back Fill Compound

Supply,Cutting,Bending,Welding,Laying With Tray / Trench / Wall in Necessary Hardware With Recommended Overlap Between The Two Strips.Earthing Conductor Of GI Strip / Copper Strip / Bare Copper Wires a.25x3mm GI Flat

b.25x6mm GI Flat

c.50x6mm GI Flat

d.25x3mm Copper Flat

e.25x6mm Copper Flat

f. 8 SWG Bare Copper Wire For

Supply And Installation of EPOXCY Round Type Insulator With Suitable Anchor Fastners And Bolt,Nuts&Washers in Various Size & Various Places.

Supply and Fixing of Earthing Bridge Clamp With Suitable Hardwares in Meter Room / Lift Mechine Room / Electrical Shaft a.4 Way Earth Bridge Clamp for Lifts

b.6 Way Earth Bridge Clamp for Motor Rooms

c.10 Way Earth Bridge Clamp In EB Meter Rooms

Supply and fixing of Early Streamer Emission Air Terminal (ESEAT) The ESEAT has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere.

Supply and fixing of standard / Special Mounting Structure of height 4.5 mts. Pipe, and 300 x 300 x 8mm MS plate,3 mtrs ,48mm OD Class C GI pipe,1.8mtr, 38mm OD inner pipe, for roof mounting with Suitable Anchor Fastners ,Bolt,Nuts,Washers & Stay Wires

Supply and Laying Down Conductor Of Single Core x 70 sq mm Multistand FRLS PVC insulated unsheathed flexiable copper Wire laid in 32mm PVC rigid conduit with all accessories like Screws Supported clamps etc.

Supply, Erection, testing and commissioning of Test terminal block box with base FRP insulater and providing suitable holes bottom conductor with all accessories like screws,clamps for terminations of top etc

Supply and fixing of LED Aviation obstruction light 2 Nos fitted in Single arm Mounted on to the Head Room / lift machine room / above water tank in terrace ( which ever is higher point ) with necessary photo electric sensors for Automatic switching ON & OFF of the light depending on the outdoor light intensity

Supply and Installation Cabinet Type Class 1 and 2 Combined Model SPD to Arrest Surges and Overvoltages in The Power Line Due to Lighning Switching Action etc

Supply,Fabrication and erection of 5mm Thick MS Chequred Plate in Various Size, ,Various Places Like EB Room / Duct. Including Gas Cutting,Grinding, Drilling,Welding & Painding With All Hardware Acessories etc

Supplying and erection of ISA MS ANGLE / MS CHANNEL member of Various Sizes and Various Thickness. Using in Trench,Metering Panels Bottom Support & Chequred Plate Bottom Frame Work Including Charges Of Cutting,Welding,Grinding,Suitable Holes Making,Painting With Necessary Hardware...etc

Supply and Instalation 10 Way SPN DB Double Door With ( 63A,4-Pole MCB-1 No,16A/6A,2-Pole MCB -2 Nos )

Supply and Laying With Suitable PVC Pipes in 4 Core X 2.5 Sq.mm Copper Wire.

ISI Certified Tested Rubber Hand Gloves One Pair-11KV Grade

Shock Treatment Chart Fixed in Glass Frame / Lamination

LT Caution Danger Board in Meter Room

First Aid Box With Complete All First Aid Medicines

ISI Certified Tested Rubber Mat Size of 1 mtr X 2.5 Thick

Supplying and fixing of 5 mtrs Length Single Arm Street Light Pole With 60 Watt Solar LED Fittings, Base Plate & Fountation Bolts

Supply and Fixing of Phase Segrigation 2 Pole / 32A MCB 3 Nos / 7way segmental DB

Supply, erection, testing and commissioning of Electrical Motor Pump rated for 900 LPM at 58 metres head End Suction Pump with MOC - CI Casing, Bronze Impeller, CS Shaft, Gland Packing with 20 HP, 3 Phase, 415V, 50Hz, 2 Pole - 3000 SYN RPM, IE2-S1 Duty, TEFC - IP55, SCR Motor Factory Coupled Pumpset, with Common Baseframe, Coupling, Coupling Guard, Foundation Bolts and Red Painted.

Fabricating & Supply, installing, testing and commissioning of compartmentalised 20HP STAR Delta Starter panel for Electrical motor driven pump.

Supplying, installing, testing and commissioning of MS Heavy Grade Pipes confirming to IS 1239, with painting one coat of zinc primer and two coats of enamel,as per drawings a.150mm nominal dia

b.100mm nominal dia

c.80mm nominal dia

d.50mm nominal dia

e.25mm nominal dia

Supplying, installing, testing and commissioning of D.I. Sluice Valve as per IS:14846 Cast Iron Constrictions with required flanges, nuts, bolts and gaskets etc. complete with accessories a.150 mm

Supplying, installing, testing and commissioning of D.I. Stainer Ball type with SS mesh, Suitable Flanges, Suction Side of the Pumps, nuts, bolts and gaskets etc. complete with accessories a.150 mm

Supplying, installing, testing and commissioning of C.I Non-return valves as per suitable standard (PN 16) DUAL PLATE type with required flanges, nuts, bolts and gasket with approved makes etc a.100mm

Supplying, installing, testing and commissioning of Rubber Bellows a.150 mm - Suction Side

b.100 mm - Delivery Side

Supplying, Installing, testing and commissioning Cl butterfly valves as per BS 5155 ( PN 16) slim seal standard lever operated type with required flanges, nuts, bolts etc. b.100 mm

Supplying, installing, testing and commissioning of brass Ball valves with fittings of screwed end type a.15mm

Supply and installation of Pressure gauges with isolation valve of suitable range for pump sets siphon, Fittings like unions / colors / reducers etc. a)150mm dial

Supply and installation of Pressure switches with isolation valve of suitable range for pump sets Fittings like unions / collar / reducers etc.

Supplying and fixing approved make 25mm dia. automatic air release valve with 25mm ball valve & unions etc

Air Vessel Tank made of 200 NB Pipe along with suitable valves

External Pipe and Hydrant Components With Accessories: Supplying, installing, testing and commissioning of MS Heavy Grade Pipes confirming to IS 1239, with painting one coat of zinc primer and two coats of enamel,as per drawings a.150 NB

Wrapping and coating anti-corrosive treatment for the under ground MS pipe having one coat of anticorrosive metal primer, one layer of asphalt tar tape wound over the MS Pipe

Supplying and erecting of Pre fabricated M.S structural steel supports such as angle, Channel, Plate etc. conforming to relevant IS standards for supporting above ground Pipe.

Supplying, installing, testing and commissioning of C.I Non-return valves as per suitable standard (PN 16) DUAL PLATE type with required flanges, nuts, bolts and gasket with approved makes etc. a.150 mm dia

Supplying, Installing, testing and commissioning Cl butterfly valves as per BS 5155 (PN 16) slim seal standard lever operated type with required flanges, nuts, bolts etc c.80 mm

Supplying, installing, testing and commissioning of brass Ball valves with fittings of screwed end type

Supplying and fixing approved make 25mm dia. automatic air release valve with 25mm ball valve & unions etc

Supplying, installing and commissioning of fire brigade inlet inlet connection of 4 way with 2 nos. 63 mm dia. built - in S.S Non- return valves instantaneous coupling type arranged on 100 mm dia. Pipe manifold and connected to Fire water tank

Supplying, erecting and commissioning of Landing Hydrants comprising of the following in the Fire duct a) Single headed hydrant valve as per IS 5290, made of Stainless Steel with 63 mm dia instantaneous out & 80 mm dia fanged inlet inlet.Blank cap , chain and hand wheel etc

b) 1 lengths of 30 M long, 63mm dia RRL hose with instantaneous Stainless Steel couplings and Hoses shall be stored in side the hose cabinet.

c) 1 no. Stainless Steel short branch pipe with nozzle.

Hose reel drum of swinging type with 19mm dia Rubber braided hose of 36M. length with 25mm ball valve (on upstream) and Shut off nozzle,

Supplying, installing and commissioning Portable Fire extinguishers of following type & capacity: FF0055 : Supply and install in position approved make Co2 type Fire Extinguisher of 4.5 kgs capacity, made from brand new seamless drawn steel cylinder as per IS: 7285 with ISI mark and Chief of controller of explosives approval, fitted with wheel/sq.grip valve as per IS: 3224 with ISI mark, with discharge bend and horn and supplied complete with initial charge as per IS: 15683 with ISI mark and wall bracket. Fire Rating 8B or 13B

Supply and install in position approved make Foam type Fire Extinguisher of 9lit capacity, fitted with discharge control valve (squeeze grip type), inside co2 gas cartridge of 60gms as per IS: 4947 with ISI mark and AFFF liquid of 540 ml as per IS: 4989 with ISI mark, with discharge hose and air induction nozzle and supplied complete with initial charge as per IS: 15683 with ISI mark and wall bracket. Fire Rating 3A, 34B

Supply and install in position approved make ABC Stored pressure type Fire Extinguisher of 6 kgs capacity, fitted with discharge control valve (sq.grip type) CE marked and pressure gauge, filled with mono ammonium phosphate powder as per EN 3 615 approval, with discharge hose and open nozzle and supplied complete with initial charge as per IS: 15683 with ISI mark and wall bracket. Fire Rating 3A, 21B

Fire buckets round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket.

Providing and installing in position the following type of sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut, PVC non-reflective self adhesive vinyl painted foam board, complete with mirror fasteners. a.Signage with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE" of 1.5cm height letters in red with white back ground.The size of the board shall be 25cm x 30 cm and shall be fixed at the height of 2 mts. from finished floor near Manual call points.

b. Floor identification Signage ( ie, GROUND FLOOR …etc.) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5 cm with contrasting colour from back ground Size shall be 15cm x 60cm.

I :Providing and fixing in position the signages" FIRE ORDER" it should contain the following matter on 3mm thick "Opaque" PVC foam board of computerized cut, PVC non-reflective self adhesive vinyl painted foam board of 3' x 4'.

II :Action By Security/Reception Upon Receipt Of Information Through Fire Alarm Orfire Detectors Or By Using Public Address System.

III: Fire evacuation plan

IV : Assembly point

V : Martix chart (Pump room)

VI : Pump Operating (S.O.P)

VII : Pump room name board

FIRE ALARM SYSTEM: Supply, installation, testing and commissioning of Fire alarm Control Panel with PA System with inbuilt following capacity AMPLIFIER suitably mounted on wall using fixing accessories like screws, plug, clamps and etc a.100 watts

Supply, installation, testing and commissioning of Hooter, built in MS Housing, LMT, (100V DC)

Supply, installation, testing and commissioning of Talk Back Unit

Supply, installation, testing and commissioning of MS Manual call point with chain and hammer (24V DC)

Supply,Installation testing and commissioning of Optical Smoke Detector with base (Conventional Type)

Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc.

Springkler System: Supplying, installing, testing and commissioning of MS Heavy Grade Pipes confirming to IS 1239, with painting one coat of zinc primer and two coats of enamel,as per drawings a.100 NB

Supply, installation, testing & commissioning of Conventional std coverage quick response quartzoid bulb type sprinkler with 1/2" screwed end connection of K-factor & Sprinklers shall be UL Listed PENDANT type sprinkler of 68 deg.C, K80

Supplying, Installing, testing and commissioning Cl butterfly valves as per BS 5155 ( PN 16) slim seal standard lever operated type with required flanges, nuts, bolts etc b.100 mm

Supply Installation of Hitech Thread Rod Supports for Springkler Bulbs & Pipes such as required extra.

Please Enable Macros to View BoQ information