Construction of link road from Pukhari to Bhumani KM 0/0 to 2/500

Amount

Excavation in hilly area in all heights and depths and in all kind of soil by mannual/mechanical means including saturated soil comprising of ordinary soil, soft rock, hard rock, chiselling, wedging out of rock (where blasting is prohibitted) and their intermediate classification of soil, setting out true to the required lines, grades, width cutting and trimming of side slopes and level as shown in the drawing and as directed by Engineer-in-Charge at site according to the MORD technical specification clause 300, 1600 and 1603.1 and sorting out useful materials and stacking the same within all leads and lifts on acquired width of road and transportation for filling in road ways, camber, embankments for grade improvements and disposal of all surplus material of approved dumping site through all modes of transportation including head load or animal transport or mechanical means along with its leveling, fine dressing and carriage of machineries, materials, tool and/labour if required. All useful material such as stone, shingal, aggregate and slates etcetera shall be sorted out, stacked and measured. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor, which shall have to be compensated by him in all cases. The rate including the octroi, royality, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Govt.

Earth work in excavation for all type of road structure in all type of classification of soil, comprising of ordinary soil, ordinary rock , hard rock chiselling / wedging out rocks ( where blasting is prohibited) as per drawings and MORD technical specification section 300,1600 and as per the directions of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of materials upto all leads and lift including dressing of sides and bottom and back filling in trenches with excavated suitable / approved materials to the original surface in layers not exceeding 150mm (one hundred fifty millimetres) compacted thickness including shoring and strutting and pumping and bailing out water ( surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 ( One cement is to four sand is to eight graded crushed stone aggregate 40mm (forty millimeter) nominal size in or under water including pumping or bailing out water( surface and sub soil water), dewatering for all heights /depths and any quantum of water including removal of slush which may arise at the time of laying under water for all heights/ depths, including the cost of form work and curing for 14 ( fourteen) days complete in Retaining walls and Breast walls etcetera. as per drawings and MORD technical specification clauses- 800,900 and 1200 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, sales tax or any other taxes imposed by the Government .

Providing and laying mechanically mixed and vibrated plain cement concrete nominal mix 1:3:6 (one cement isto three sand isto six graded/ crushed stone aggregate 40mm (forty millimetre) nominal size grade M-10 (M- ten) in foundation including cost of curing and form work ,pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water complete in all heights/depths as per drawing and MORTH technical specifications section 2100 and as per the directions of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated plain cement concrete nominal mix 1:3:6 (one cement isto three sand isto six graded/ crushed stone aggregate 20mm (twenty millimetre) nominal size grade M-10 (M- ten) in foundation and drain etcetra including cost of curing and form work ,pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water complete in all heights/depths as per drawing and MORTH technical specifications section 2100 and as per the directions of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Govt.

Providing and laying mechanically mixed and vibrated plain cement concrete nominal mix 1 : 2 ½ : 5 ( one cement isto two & half sand isto five graded crushed /broken stone aggregate 40mm ( forty millimetre) nominal size in sub structure etcetera as per drawings and M.O.R.D. technical specifications and section 800, 900 and 1200 including the cost of form work, curing complete and including 6auling of materials in all leads, lifts and other incidental or as per the entire specification and directions of Engineer-in-Charge . The rate includes the octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete nominal mix 1 : 2 ½ : 5 ( one cement isto two & half sand isto five graded crushed /broken stone aggregate 40mm ( forty millimetre) nominal size in open foundations for all type of structures like Parapets etcetera as per drawings and M.O.R.D. technical specifications and section 800, 900 and 1200 including the cost of form work, curing complete and including 6auling of materials in all leads, lifts and other incidental or as per the entire specification and directions of Engineer-in-Charge . The rate includes the octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain / reinforced cement concrete in open foundation for all type of structure of plain cement concrete (Grade M-20) nominal mix 1:2:4 ( One cement isto two sand isto four graded crushed stone aggregate 40 mm ( forty millimatre) nominal size in or under water and curing complete for 14 ( fourteen) days including pumping or bailing out water, ( surface and sub soil water) dewatering for all depths and any quantum of water including removal of slush which may arise at the time of laying water complete for all heights and depths including cost of form work as per drawing and MORD techanical specification clause 802,803,1202 and 1203 or as per direction of Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates are inclusive of the octori, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Back filling behind abutment, wing wall and return wall complete as per drawings and MORD technical specification Clauses 1204.3.8 with granular material and as per the direction of Engineer - in - Charge including carriage of material within all leads,lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Govt.

Providing weepholes in brick masonry/plain /reinforced concrete abutment,wing wall,return wall with 100 mm (One hundred millimetre) dia PVC pipe extending through the full width of the structures with slope of 1(V):20 (H) towards the drawing face complete as per drawing and MORTH technical specification clauses 614, 709, 1204.3.7 and as per direction of Engineer - in - Charge including carriage of material within all leads,lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Govt.

Providing and laying reinforced cement concrete pipe NP2 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 (One cement isto two sand) but excluding excavation, protection work, back filling, concrete and masonary work in head walls and parapets clause 1108 including carriage of materials with in all leads, lift and other incidental and as per the entire satisfation and direction of Engineer-In-Charge. The rate including octroi,royality,Malkana,toll tax GST, or any other taxes imposed by the Government.

Loosening of the ground upto a leavel of 300mm (three hundred millimetre) below the subgrade level watered graded and comacted in layers to meet requirement of tables 300.1 and 300.2 for subgrade construction as per Technical specification clause 303. as per or as directed by the Engineer-in-Charge ,including carriage of material within all leads, lifts and other incidental. The rate including octroi, royality ,Malkana, toll tax, sales tax, GST or any other taxes imposed by the Government.

Preparation of sub grade by dressing to camber (Earth work for the cutting involved for sub grade to be paid for separately depending upon the classification of soil) compacted and as per the directions of Engineer-in-Charge as per MORD section 300 including carriage of material within all leads and lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Govt.

Construction of gravel / soil aggregate sub base/base by providing well graded materials of nominal maximum size 80 mm ( eighty millimeter) as per table 2.3 of IRC –SP-77-2008 spreading in uniform layers with tractor mount appropriate grading arrangements on prepared surface, mixing by mix in place method at OMC with tractor mount appropriate rotavator attachment and compacting with three wheel 80-100 (eighty -one hundred) kN static roller to achieve the desired density, as per MORD Technical Specifications clause 402 and as contained in para 2.2 of IRC- SP-77 -2008 as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octroi, royality ,Malkana, toll tax, sales tax or any other taxes imposed by the Government.

Providing, laying, spreading and compacting to 75mm (seventy five millimeter) compacted thickness, graded, broken /crushed stone aggregate, for Grading-II,63mm to 45mm (sixty three millimetre to forty five millimetre) nominal size to water bound Macadam, specification including spreading in uniform thickness using template, hand packing rolling with three wheel 80-100 (Eighty to Hundred) KN static roller in stages to proper grade and camber including applying and brooming stone screening ,type-B, 11.2 mm (eleven point two millimeter) at the rate of 0.18 (Zero point one eight) cubic meter per 10 square meter (ten square metre) of road surface to fill up the interstices of coarse aggregate, watering and compacting to required density Grading-II as per MORD technical specifications clause- 405 and as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Govt.

Providing, laying, spreading and compacting to 75mm (seventy five millimeter) compacted thickness, graded, broken /crushed stone aggregate, for Grading-III, 53mm to 22.4mm (fifty three millimetre to twenty two decimal four millimetre) nominal size to water bound Macadam, specification including spreading in uniform thickness using template, hand packing rolling with three wheel 80-100 (Eighty to Hundred) KN static roller in stages to proper grade and camber including applying and brooming stone screening ,type-B, 11.2 mm (eleven point two millimeter) at the rate of 0.18 (Zero point one eight) cubic meter per 10 square meter (ten square metre) of road surface to fill up the interstices of coarse aggregate, watering and compacting to required density Grading-III as per MORD technical specifications clause- 405 and as directed by the Engineer-in-Charge including carriage of materials with in all leads, lifts and other incidentals. The rate including the octroi, royality, Malkana, toll tax, sales tax or any other taxes imposed by the Govt.

Providing and applying Primer Coat with bitumen emulsion (SS-I) on the prepared surface of granular base including cleaning of road surface with hydraulic brooms and spraying primer at the rate of 0.85 kg (Zero decimal eight five kilogram) per square metre of road surface using bitumen emulsion pressure distributor complete, as per MORD technical specifications clause 502 as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Govt.

Providing and applying Tack Coat with bitumen emulsion (RS-I) using emulsion pressure distributor at the rate of 0.275 Kg. (Zero decimal two seven five Kilogram) per Square metre on the prepared dry and hungry bituminous surface treated with primer and cleaned with hydraulic brooms/ complete as per MORD technical specifications clause 503 as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Govt.

Providing laying and rolling of open graded Premix Carpet of 20mm (twenty millimeter) compacted thickness, composed of 13.2mm (Thirteen decimal two millimetre) to 5.6mm (five point six millimetre) aggregates at the rate of 0.27 cum (zero decimal two seven cubic metre) premixed with bitumen binder grade - VG-10 (Viscosity Grade ten) at the rate of 14.6 kg (fourteen decimal six kilogram) per ten square metre of road surface, to the required line, grade and level to serve as wearing course on a previously prepared base including mixing and heating binder and aggregate in suitable hot mix plant, 30/40 (thirty oblique forty) tonne per hour capacity, transporting mixed materials with tipper and laying with pavers finisher and rolling with a three wheel 80-100 (eighty to hundred) kN static roller finished to required level and grade to be followed by seal coat of type-B complete as per MORD technical specifications clause 506 as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals.The rate including the octroi, royality, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Govt.

Providing and laying Seal Coat for sealing the voids in bituminous surface laid to the specified levels, grade and cross fall using type-B, with bitumen grade VG-10 (Viscosity grade ten) at the rate of 6.8 kg (six decimal eight kilogram) premixed with 0.06 (zero decimal zero six) cubic metre of fine aggregate per 10 sqm (ten square metre), premixed in mini hot mix plant, transporting mixed material with tipper and laying of mixed material manually and rolling with three wheel 80-100 (eighty to hundred) KN, static roller complete as per MORD technical specifications clause 508 as per direction of Engineer-in-Charge including carriage of materials within all leads and lifts and other incidentals.The rate includes octroi, royality, Malkana, toll tax ,GSTor any other taxes imposed by the Government.