Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹2.0 L
EMD Value
₹4,100
Closing Date
5 Nov 2026, 2:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
KMC/EE/WS/JU/BR-XI
Baghajatin Market Complex Unit-Iii,Baghajatin Station Road, Kolkata-700086
REPLACEMENT OF MALFUNCTION 100 MM DIA AIR VALVE AND 300 MM BUTTERFLY VALVE ON INLET PIPE AT NORTH FHOOLBAGAN, ANANDA MELA CLUB, 45 BUS STAND AND PATULI 1 NO OVER HEAD IN WARD NO - 101 BR-XII
2026_KMC_1046650_1
EE(WS)/BR-XI/NIeT/67/2026-27 1st call
Open Tender
CIVIL WORKS
Percentage
21 days
KMC WARD NO - 101
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹4,100
14 Oct 2026
14 Oct 2026
7 Nov 2026
14 Oct 2026
5 Nov 2026
14 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | CHAPTER - VIII SUPPLYING OF MATERIALS 8.13 Ductile iron Single Chamber type air release valve having small orifice elastic ball resting on gun metal orifice nipple large orifice vulcanite ball seating on moduled seat ring, valve with built-in-Kinetic features, isolating sluice valve mounted in horizontal position and operated by a metre wheel gearing:inlet faced and drilled to IS 1538 Table 4 & 6. valve suitable for maximum working pressure of 10 kg/CM2 Diameter in mm 100 | 3 | EACH | 29,026 | ₹87,078 |
| 2 | CHAPTER - VIII SUPPLYING OF MATERIALS 8.11Double flanged double eccentric design manually operated ductile iron butterfly valve having body disc, and end cover in graded ductile iron to 65, synthetic rubber face ring secured on disc by a SS/AISI 304 retaining ring with stainless steel screws the rubbering sitting on a corres-ponding integral monel 60 seat in body stub shaft of AISI 431 riding in PTFE lined stainless steel bearing, valves suitable for maximum working pressure of 10 kg/cm... and body tested 15 kg/cm..., flanges flat faced and drilled to I.S 1538: 1993.Diameter in mm 300 | 1 | EACH | 48,190 | ₹48,190 |
| 3 | CHAPTER - II LAYING & JOINTING PIPES, SPECIALS ETC.2.1 C.I. / D.I. Pipe & Specials 2.1 C.I. / D.I. Pipe & Specials 2.4Valves 2.4.1 Lowering, fitting and fixing of all types of valves in proper position and alignment using chain pully block or crane(for diameter above 250 mm) by providing temporary support,as required,gaskets,nuts& bolts etc.all cornplete as per specification and direction of the Engineer-in-Charge.[The rate Includes cost of flange joints]300mm dia. | 1 | EACH | 2,321 | ₹2,321 |
| 4 | CHAPTER - II LAYING & JOINTING PIPES, SPECIALS ETC.2.1 C.I. / D.I. Pipe & Specials 2.1 C.I. / D.I. Pipe & Specials 2.4Valves 2.4.1 Lowering, fitting and fixing of all types of valves in proper position and alignment using chain pully block or crane(for diameter above 250 mm) by providing temporary support,as required,gaskets,nuts& bolts etc.all cornplete as per specification and direction of the Engineer-in-Charge.[The rate Includes cost of flange joints]50mm dia. | 3 | EACH | 986 | ₹2,958 |
| 5 | CHAPTER - II LAYING & JOINTING PIPES, SPECIALS ETC.2.1 C.I. / D.I. Pipe & Specials 2.1 C.I. / D.I. Pipe & Specials 2.1.6 Flange joint to C.l./D.l/MS. pipes and specials including supply of rubber gasket. nuts. bolts. washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the Engineer-in-Charge. Diameter in mm 100mm dia. | 3 | EACH | 461 | ₹1,383 |
| 6 | CHAPTER - II LAYING & JOINTING PIPES, SPECIALS ETC.2.1 C.I. / D.I. Pipe & Specials 2.1 C.I. / D.I. Pipe & Specials 2.1.6 Flange joint to C.l./D.l/MS. pipes and specials including supply of rubber gasket. nuts. bolts. washers etc. of best quality to make the joint watertight at required hydraulic pressure all complete as per specification & direction of the Engineer-in-Charge. Diameter in mm 300mm dia. | 2 | EACH | 1,033 | ₹2,066 |
| 7 | CHAPTER - VIII SUPPLYING OF MATERIALS 8.4Supply of Flat Rubber Gasket of EPDM Quality with ISI Mark to IS: 5382/1985 Type-4 suitable for flange joint, drilled to IS: 1538 (Table ... VI). The gasket should have dual thickness 3/6mm with 6 mm thickness at the sealing cross section.100mm dia | 6 | EACH | 80 | ₹480 |
| 8 | CHAPTER - VIII SUPPLYING OF MATERIALS 8.4Supply of Flat Rubber Gasket of EPDM Quality with ISI Mark to IS: 5382/1985 Type-4 suitable for flange joint, drilled to IS: 1538 (Table ... VI). The gasket should have dual thickness 3/6mm with 6 mm thickness at the sealing cross section.300mm dia | 4 | EACH | 241 | ₹964 |
| 9 | CHAPTER - VIII SUPPLYING OF MATERIALS HIRE CHARGES OF MACHINERIES 8.26 Hire charges of moveable crane with fuel & manpower having load handling capacity upto 14MT with the 45 deg. moveable arrangement & the boom length of 40 feets for loading & unloading of various materials / accessories of water supply works. For minimum engagement of 8 hrs. In a day | 1 | Daily | 7,936 | ₹7,936 |
| 10 | CHAPTER - I [ SUPPLEMENTARY ] EXCAVATION, SHORING, BAMBOO PILING, FENCING & SIGN BOARD, LIGHTING & SIGNALING AND SITE CLEANING ETC. 1.17 Clearing compound premises of shurbs, plants, jungles etc. by cutting andremoving as directed (Specific permission of Engineer in- Charge prior to execution will be necessary). (Payment to be made on area cleared) | 1,656 | SQUARE METER | 11 | ₹18,216 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
TBID.pdf
Tender Documents • 1.43 MB
BOQ_2564559.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .