Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
₹10.9 L
EMD Value
₹11,515
Closing Date
29 Oct 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Rural Development and Panchayat Raj Department
Anusha s v
Constructgion of Anganawadi center-2 in Bannikuppe village of Bannikuppe FP of Hunsur Taluk
RDPR/2025-26/BD/WORK_INDENT14542/CALL-2
RDPR/2025-26/BD/WORK_INDENT14542/CALL-2
Reserved
Buildings
Two Tender Document System(Two Cover)
RDPR Division Office K R Nagara
7 documents required · 7 mandatory
Work Done Certificate Tenderer in his name should have satisfactorily completed as a prime contractor for at any nature of work for the KW 1 works of Sl. No.02 of this notification Construction of Buildings. value not less than 25percent Rs 2.30 Lakh of the amount put to tender in any one of the last five financial year period 2020-21, 2021-22, 2022-23 2023-24 and 2024-25 should be obtained from not below the rank of Executive Engineer,With indent number
Annual turnover certificate in all classes of civil engineering construction works only for least five financial years i.e. 2020-21, 2021-22, 2022-23 2023-24 and 2024-25 obtained from the Competent authority Charted Accountant/Auditor.The tenderer must have achieved in at last one financial years of Last Five Financial Years an annual financial turnover not less than The amount put to tender Rs 9.21 Lakhs. Certificate should be in the prescribed form as in KW1 Section 3 3.2a
PWD Contractor Civil Registration Certificate class 4 and above
Annual Turnover Certificate in all classes of Civil Engineering works only for last Five Financial years ie.,2020-21, 2021-22, 2022-23 2023-24 and 2024-25 Certified from Charted Accountant with compulsory UDI number Profit and Loss, balance sheet shall be enclosed.With indent number
Reserved Category Certificate should be attached
Submission of K Form liquid assets /availability of credit facilities of not less than Rs 2.70 Lakhs Credit lines/ letter of credit certificates from Nationalized bank for meeting the fund requirement as per KW-1
Contractors registered under class I and II may tender for works anywhere in the state.Contractors registered under class III may tender for works within the districts of the Public works Department circles where in they are registered.Contractors registered under Class IV may tender for works within the district or within the division whichever is applicable,where they are registered.These registrations are valid for all
₹500
₹11,515
13 Oct 2025
13 Oct 2025
30 Oct 2025
24 Oct 2025
Constructgion of Anganawadi center-2 in Bannikuppe village of Bannikuppe FP of Hunsur Taluk
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of all materials, labour, sc...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...
Providing and fixing in position fully panelled Mathi/Nandi wood shutters for doors with stiles and rails of 40mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wide as per dra...
Providing and fixing in position Mathi/Nandi wood fully panelled shutters for windows with stiles and rails of 35mm. thick, 75mm wide in two halves with panels of 25mm thick including cost of material...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openi...
Cudddapah slab 2.5cms thick( P.No. A-19, I.No.261,) (Volume No-2) 2023-24 ---- Complete as per technical specification with all lead and lifts loading,unloading charges cost of conveyance of all mater...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster with cement mor...
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colou...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...
Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two coats applied @ 1.43 ltr/10 m² over and including priming coat of exterior primer a...
Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90 ltr/10 m² over an under coat of primer applied @0.75 ltr/10 m² of approved brand and manufacture to give...
Providing and fixing vitreous china dual purpose closet suitable for use as squatting pan or European type water closet (Anglo Indian W.C pan) with seat & lid fixed with C.P. brass hinges and rubber b...
Providing & fixing factory made PVC Door frame of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet metered cut at corners & jointed 2 No.s of 150mm long bracket...
Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Pr...
Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a primi...
Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding of granular material in single row including fixing collar with cement mortar 1:2 but excluding excavation,...
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wa...
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32 mm dia (P.No.136, I.No.14.28.1 Volume No-2)2023-24 ---- Complete as per techn...
Providing and fixing brass bib cock of approved quality : 15 mm Dia nominal bore (P.No.117, I.No.13.2.1 Volume No-2)2023-24 ---- Complete as per technical specification with all lead and lifts loading...
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore (P.No.117, I.No.13.5.1 Volume No-2) 2023-2EACH ---- Complete as per ...
Providing and fixing gun metal non- return valve of approved quality (screwed end) :25 mm nominal bore Horizontal (P.No.117, I.No.13.6.1 Volume No-2)2023-24 ---- Complete as per technical specificatio...
Providing and installing at site of work PVC pipes including cost of pipes and specials and labour, including lowering into trenches, laying true to line, level and perfect linking at joints leak proo...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and ...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe wi...
Cost of Atlanta/Suguna/CRI/Kirloskar/Other qualent Pumps 1.0HP/0.075, 10Stage(P-XLIII I-I) ---- Complete as per technical specification with all lead and lifts loading,unloading charges cost of convey...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
notification 10 final pdf.pdf
Tender Document • 7.42 MB
kw1bannikuppe pravarga 2A.docx
Tender Document • 0.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .