Augmentation Renovation of water supply scheme and Providing Functional Household Tap Connection to village Malikpura Distt. Sirsa under JJM

Amount

N.S. Item

Supply & erection of Horizontal spindle split casing type pumping sets of minimum four (4) star rating duties directly coupled to AC squarrel cage induction type motor with 1450 RPM, 3 Phase, 50 Hz and accessories as described in Schedule No.II complete in all respect with priming arrangement with complete base frame. (a) Raw Water Pump Set 600 LPM with 12.00 Mtrs. Head.

(b) Clear Water Pump Set 600 LPM with 40 Mtrs. Head.

Supply and fixing following CI D/F pipe and specials/ bell mouth / including cost of Jointing materials, laying, jointing, refilling including making adequate supports of masonry/ concrete for delivery and suction pipe from bell mouth in the collecting tank upto the rising main laid by the department as per plan shown from the foundation wall of the pump chamber for all the raw water and clear water pumping sets at water works, as per specification given in schedule No. II for For Pumping Machinery (B) D.I. Pipes including cutting, threading & blank flange fitting (ii) 150mm i/d

Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stoutedwith suitable angle iron frame works and completely powder coated of approximate size 1200x900mm and 400mm deep having following item. A) For raw water pump sets for 600 LPM x 12 M Head = 2 No. (a) Main switch 63 Amp 2 No (L&T Siemens, ABB) (b) Volt meter 100x100mm range 0 to 500 Volt 1 no. (AE/KAPPA/L&T) (c) Amp. meter 100x100 mm range 0 to 100 Amp 2 No. (AE/KAPPA/L&T). (d) CT 100/3 = Nos (AE/KAPPA/L&T). (e) VSS 1 No. & ASS 2 No. each of approved make. (f) SPP 1 No. of approved Make. (g) Motor starter, star delta 2 No. for 600 LPM x 12 M Head Motor (L&T Simens AAB) (h) Capacitor of suitable capacity - 2 Nos. i) Indicating Lamp - One Set. j) Change over switch .. Amp. = 1 No.

Supply, erection, testing and commissioning of wall mounted electrical panel board, fabricated from 16 SWG CRCA sheet duly stoutedwith suitable angle iron frame works and completely powder coated of approximate size 1200x900mm and 400mm deep having following item. A) For Clear water pump sets for 600 LPM x 40 M Head = 2 No. (a) Main switch 63 Amp 2 No (L&T Siemens, ABB) (b) Volt meter 100x100mm range 0 to 500 Volt 1 no. (AE/KAPPA/L&T) (c) Amp. meter 100x100 mm range 0 to 100 Amp 2 No. (AE/KAPPA/L&T). (d) CT 100/3 = Nos (AE/KAPPA/L&T). (e) VSS 1 No. & ASS 2 No. each of approved make. (f) SPP 1 No. of approved Make. (g) Motor starter, star delta 2 No. for 600 LPM x 40 M Head Motor (L&T Simens AAB) (h) Capacitor of suitable capacity - 2 Nos. i) Indicating Lamp - One Set. j) Change over switch .. Amp. = 1 No.

Providing and fixing exhaust fans 18" i/d (450mm) complete with suitable G.I. Sheet of approved make complete in all respects.

Providing & fixing ceiling fan 1400mm (56") with speed adjuster of reputed make (make Crompton, Usha, Bajaj, Orient) complete in all respects.

Taking out filter media from filter bed & placing the same into filter beds after washing of cleaning complete in all respects. Top layer

2nd Layer

3rd, 4th & Bottom

Drawing out RCC Bed Plates of size 16"x16"x2" from filter bed & placing the same after washing & cleaning.

Washing, cleaning of central drains & sub drains of filter beds.

Credit for old pumping machinery raw water complete job

Credit for old pumping machinery clear water complete job

Bidder Name

Amount

Rajesh Kumar Contractor(GSTN-06AHNPK5447M2ZR)

Raj Kumar, Contractor(GSTN-06AIZPK9656K1Z6)

Lokesh Kumar, Contractor(GSTN-06AYAPK6590K1Z4)

RANBIR SINGH(GSTN-06CBZPS1549A2ZB)

Raj Kumar, Contractor

Rajesh Kumar Contractor

Lokesh Kumar, Contractor

Lokesh Kumar, Contractor

Raj Kumar, Contractor

Rajesh Kumar Contractor