8930 ADDITIONAL ALTERATION AND SPECIAL REPAIRS TO WASHROOMS AND SUNKEN FLOORING OF BLDG N P 183 OF PM DEPT PROVISION OF WASH BASIN FACILITY WITH FRESH WATER AND DRAINAGE AT NTG MBI AND WRSTG MBI IN FMU SS COMPLEX ND MBI PROVISION OF SLIDING WINDOW IN

Amount

Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed

-ditto- as per Item No. 01 above but n.exc 1.5 sqm complete all as specified and as directed

S &F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (Note : M.S. hold fast/ lugs or SS dash fasteners shall be measured and paid for separately).

M&L for providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be measured and paid separately).

S&F powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, window & partition/Ventilator etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant complete all as specified and as directed

M&L for 4 mm thick plain glass sheets ordinary quality in squares exc 0.5sqm each pane fixed with rubber beading for aluminium windows/doors etc all as specified and directed.

S&F aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104, 7.5 mm thick all as specified and as directed by Engr- in- charge.

S&F aluminium alloy wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple complete all as specified and as directed

S&F 200 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F 150mm long Aluminium anodized handle of extruded sections etc complete all as specified and directed.

S & F 100 mm medium weight Mild Steel Butt hinges to the frame etc complete all as specified and directed.

S&F 150mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M & L for Non skid coloured ceramic tiles 7 to 8 mm thick ( square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles with and including 15mm thick screed bed in CM 1:4 complete all as specified.

M & L for Coloured glazed ceramic tiles in vertical surface 600 X 300 X 10 mm thick, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles with and including 10 mm thick backing coat in CM 1:3 complete all as specified.

M & L for Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding/equal to 0.36 sqm but in floors/ wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 20mm thick screed bed in CM 1:4 complete all as specified.

All as per item No 16 above but in skirting/ vertical surface including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

Taking up or down 15 mm bore GI tubing and connection including removing to store complete all as specified and directed.

_Ditto_ all as per Sl item No. 18 above here in before but 20 mm bore complete all as specified and directed.

_Ditto_ all as per Sl item No. 18 above here in before but 25 mm or 32 mm bore complete all as specified and directed.

S & F GI tubes medium grade galvanised with all fitting and fixed complete to walls and ceiling or laid in floors 15 mm bore of pipe complete all as specified and directed.

_Ditto_ all as per Sl item No. 21 above here in before but 20 mm bore of pipe

_Ditto_ all as per Sl item No. 21 above here in before but 25 mm bore of pipe

S&F fancy type chromium plated stop valves 15 mm bore cast copper alloy screwed down high pressure with crutch or butter fly handle screwed both ends for iron pipe or for union as fixed in repairs complete all as specified and directed.

S&F vitreous china water closet (Squatting pan) “Orissa” pattern of size 580 x 440 mm white with integral foot rest and ‘P’ trap (excluding flushing cistern) but including PVC flush pipe and provision of lime concrete bedding as fixed in repairs complete all as specified and directed.

S&F vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed as in repairs complete all as specified and directed.

S&F in repair for seat cover for pedestal pan with plastic water closet seat , black or white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S & F for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets complete all as specified and directed.

S&F Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including bottle trap complete all as specified and directed.

S & F in repairs for providing 15 mm dia PVC connection of length 450mm long complete all as specified and directed.

S & F in repair for health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as directed.

S&F toilet paper holder of viterous china box type white coloured fixed to walls with chromium plated brass screws CP brass fixed to walls etc, fixed in repairs complete all as specified and directed.

S&F brass CP towel rail, 20mm dia, D type , 60 cm long between flanges fixed in repairs complete all as specified.

S&F fancy type pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and 15 mm bore of pipe

S&F in repair 15mm bore fancy type bib taps chromium plated cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule and fixed (weight not less than 120gms).

Dismantling 100/75 mm bore, cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches if required.

M&L for 100 mm dia cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints including CI pipe collar fixed to walls/floor all as specified and directed.

M&L 75mm bore cast iron soil waste and vent pipes (sand cast pipes) in any length with or without ears with cement joints including CI pipe collar fixed to walls/floor all as specified and directed.

S&F CI bends (any radiius) diminishing pieces or tapers (larger bore measured) fitted with oval access doors of following sizes :-

(a) 75mm dia

(b) 100mm dia

S&F CI branch pieces single (equal or unequal) ,T pieces,Y(equal or unequal) ordinary or inverted ( spigot or socket type) or with parallel branches of following sizes:-

(a) 75mm dia

(b) 100mm dia

S&F 75mm dia of outer cast iron nahani trap , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.

S&F of vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified Fixed in repairs.

M&L for 20 mm thick Granite stone slab ( of any type) work ( table rubbed and polished) in steps, risers, jambs, pillars, window cills, cooking platforms, urinal partition and like in cement mortar ( 1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as directed.

Extra over Kota stone slabs/ granite as in steps for edge polishing/ chamfering/ noising/ grooves/ bevelling etc complete all as specified and directed.

Material & labour for cleaning the sunken/lowered portion of RCC slab surface (Incl floor and vertical surface) by wire brush or by chisel out any mortar sticking to the surface and brooming completely over mother slab, 40mm thick PCC (1:2:4) type B0 using 12.5mm graded stone aggregate in padding concrete to achieve proper slope using intergral WPC @ 3% by wt of cement, fill it with water for checking dampness and seepage. Where dampness is noticed, nozzles shall be fixed and grouting to be carried out. (WPC shall be measured and paid seperarly). All junction of point of side wall where CI/GI pipes are passing shall be sealed with epoxy putty and applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level + 100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. Make :- Dr Fixit, Fosroc, STP as approved.

Material & labour for water proofing plaster for sunken portion in CM (1:3), 20 mm thick in two coats (10mm and 10mm) (After doing 10mm plaster and complete drying, a layer of 3mm APP membrane shall be applying using torch application method invl primer and than again 10mm thick plaster is applied) using Pidiproof LW+ water proofing chemical of Dr. Fixit or equivalent in STP, Fosroc as per manufacturer's instruction and finishing the surface even and smooth without using extra cement and filling the sunken portion with nominal mix cement concrete of 1:7:12 with graded coarse aggregate. (Water Proofing Chemical shall be measured and paid separately) Note : Test of water proofed area (Ponding test) by filling water for at least 72 hrs and shall be tested for water leakage/seepage and to the entire satisfaction of GE/AGE

Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries all as directed for a distance max upto 500m complete all as specified.

M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surfaces finished even and smooth with using sagol finish all as specified and directed.

M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed.

M&L for prepration of old plastered / decorated surfaces of walls and applying two coat of oil bound distemper on plastered/decorated wall surfaces complete all as specified and directed.

M & L for Complete removal of existing treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof including necessary scaffolding complete all as specified and directed

M&L for preparation of New surfaces of steel any description over 10 cms width or girth and applying two finishing coat of synthetic enamel paint over red oxide primer complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using (Using 40mm graded stone aggregate) as in flooring, 100mm thick etc all as specified and directed.

M&L for brickwork with sub class 'B' bricks , straight or curved on plan exc 6m mean raidus built in cement mortar 1:6 complete all as specified and directed

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for

S&F aluminium (extruded section) body door closer hydraulically regulated, designation No.2, universal type, suitable for door shutter of 701 to 850 mm in width & of weight between 36 to 60 kg & fixed in repairs complete all as specified and directed.

Removing debries exc. 1.50 Km but n exc. 25 Km and depositing where directed, in soil outside MD land.

M & L for Coloured glazed ceramic tiles in vertical surface area of tiles n exc 0.18 Sqm thick with and including 10 mm thick cm (1:4) backing coat and Triangular filliting at top of skirting, set and jointed in neat cement paste and pointed in coloured cement to match the shade of the tiles.

S&F in repair corner glass shelf with brackets (Make - Jaquar CAT PART NO- CAN-1173) all as specified and directed.

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 20 mm bore fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

S&F PVC connection on pipe 450mm long with brass nut bolt complete all as specified and as directed by Engr-in-Charge.

S&F in 32mm dia PVC waste pipe for WHB fixed in repairs complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles and disposing off complete all as specified and as directed

M&L for brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 all as specified.

M&L for brick work with sub class 'B' bricks , straight or curved on plan to any radius in half brick thick wall built in cm 1:4.

Taking down cement plaster of any description hacking for key, racking out joints and scrubbing down with water etc to receive plaster and removing debries outside MD land incl necessary scaffolding complete all as specified and as directed

Rendering 15mm thick on brick work or concrete surfaces in cement mortar 1:4 finished even and fair including mixing integral water proofing compound in the proportion as mentioned in manufacturer's instructions complete all as specified and as directed (Water proofing compound to be measured and paid for separately).

Supply only integral water proofing compound complete all as specified and as directed

Dismantling stone slab and tiles of any description or thickness laid bedded and pointed in any mortar in floors, aprons complete all as specified and as directed

M&L for 20 mm thick granite maching cut as in skirting/vertical surfaces i.e jambs /risers and pillars etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed. (colour of granite will be approved by the GE/Engr-in-Charge).

S&F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel stapple complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified and as directed

M&L for preparation of old decorated surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed.

M&L for applying 1 to 2 mm thick wall care putty (JK/Birla) for making the surface even & smooth complete all as specified and as directed.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of oil emulsion distemper complete all as specified and as directed

M&L for New plastering wall/ceiling preparation and applying two coat of oil bound distemper over a coat 1 to 2 mm thick wall care putty (JK/Birla ) and primer incl preparatiomn of surfaces complete all as specified and directed.

M & L for New treatment/Old of walls and applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer on wall/roof including preparation of newly plastered surface and necessary scaffolding upto G+9 storey of bldg complete all as specified and directed by Engr-in-Charge.

M&L for Complete removal of existing treatment of old decorated surfaces of walls soffits, facia roof and applying two coat of weather proof acrylic based paint (100% acrylic) over one coat of cement base primer with necessary scaffolding for high rise bldgs upto G+9 floor, complete all as specified and as directed

S&F powder coated aluminium frame for doors, windows, ventilators and partition with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc, complete all as specified and as directed

M&L for aluminium sliding door with one or more rebates inclusive of sliding channel, required ball bearing for sliding purpose, concealed locking arrangement and handles, sliding stopper bolts etc complete Opaque Glass to be fitted as glazing in door with required rubber Gasketing etc complete all as per directed by Engr-in-Charge.

M&L for 12mm thick medium density fibre board, exterior grade, fixed to timber / Aluminium Frame work with screws.

S&F 5.5 mm thick, sheet glass is ground or obscured or frosted, on one side ordinary quality in any size of pane complete all as specified and directed.

jalandhara construction

sai construction