LOT-09

Amount

E/W in excavation in Foundation

C.C.in 1:3:6 (cement:c/sand:Stone grit) in foundation

B/W in 1:6 in Cement Mortar

R.C.C.in 1:1.5:3(cement: c/sand: Stone grit)

Bending, binding cutting and placing of reinforcement including cost of binding wire including cost of steel.

Ordinary centering and shuttering for C.C./R.C.C. work

12mm Cement plaster in 1:4 (1cement:4coarse sand) mortar complete.

Finishing walls with exterior emulsion paint of approved brand and manufacture and of required shade and undacorated wall surface to give even shade over @ 1.25 Ltr/10sqm including one coat of primer appled @ 0.75Ltr/10sqm coat curing and cost of all material, labor, T&P etc. required for proper completion of work.

Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces upto 10cm width or girth or small articles not exceeding 0.10 Sq.M. in area with superior synthetic enamel such as Luxol 3, Hi gloss Apcolite, Superlac, Dulux specified brushing to give and even shade and including the cleaning the surface of all dirt, dust and other foreign matter sand papering and scrapping including cost of all materials, labour, tools and plants etc. required for proper completion of work.

Laying 4.0 cm th. C.C. Flooring

P/L integral cement based water proofing treatment BIRCK KOBA including preparation of surface as required for treatment of roofs, consisting of…………….comp. of the work

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges, making and finishing the outlet complete.

Providing and fixing of steel gate Window

Providing and fixing on wall face 110mm unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.

Supply and fixing hexagonal/Round G.P.fan box of approved make made up of 1.0 mm thick ISI Marked G.P.sheet spot welded Four to Eight holes of 25.4 mm for pipe entry of the box. Holes hould be semi-shuttered type with 0.5 mm G.P. Sheet made upper & lower cover duly screwed fitted with 300 mm round zink coted M.S Bar X 12 mm & brand name should be embossed. Fixing with wiring conduit laid in the R.C.C. roof before concreting alongwith supply of all material, labour, T&P etc. required for proper completion of the work.

Providing and fixing glass strips of 4mm thick in joints of floor and skirting at the time fo laying Including labour, T&P etc. complete in all respect.

Signboard with painting latter and writing

HETRAM CONSTRACTOR

P L TRADERS