PROVN OF FLUSHING CISTERN INCLUDING RENOVATION OF TOILETS IN CERTAIN SMQ AT AF STN JAISALMER

Amount

Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for 10mm thick rendering in CM 1:4 on any faces of brick or concrete surfaces of walls & finishing the surface even and smooth complete all as specified and directed.

M&L for rendering 5mm thick in CM 1:4 on ceiling surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for prepariation of undecorated surfaces plastered or unplasterd and applying two coats of white wash on surfaces of walls complete all as specified and directed.

M&L for prepariation of undecorated surfaces plastered or unplasterd and applying two coats of white wash on surfaces of ceiling complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 Sqm each complete all as specified and directed.

S&F of Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification.

S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification.

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for frames & shutters of ventilators with extruded built up standard / appropriate sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasketetc including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per the directions of Engineer-in-Charge.

S&F for stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with aluminium snap beading complete all as specified and directed.

S&F for anodised aluminium expanded metal mesh of any size/shape for window/ventilator fixed in Aluminium frame with aluminium snap beading, screws etc complete all as specified and directed.

S&F for 4mm thick Figured glass, pin head type in squares n exc 0.5 sq. m in each pane fixed to aluminium frame including necessary glazing clips and rubber packing and beading complete all as specified and directed.

S&F for 100 mm long stainless steel hinges type B-12 complete all as specified and directed.

S&F for Extruded aluminium alloy handles 150mm size, fabricated type, anodised complete all as specified and directed.

S&F for 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed.

M&L for Glazed ceramic coloured tiles as in dado/skirting 300x 450x 7mm thick on vertical surfaces, over and including 10mm thick cement and sand mortar (1:4) backing coat set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile, complete all as specified and directed.

M&L for Anti Skid coloured ceramic tiles of size 300x300x6-7mm thick as in floors over and including 15mm thick in cement and sand mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match, complete all as specified and directed.

M&L for 18mm to 20mm thick granite stone work (table rubbed and polished) as in steps, jambs, pillars, window-cills, cooking platforms and like in cement and sand mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15 mm cement screed bed in cement and sand mortar 1:6 laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and as directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for Cement concrete Type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

Cutting chases, pinning in, making good to facings as original where required and pointing in cement and sand mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10cm girth in stone concrete blocks or slabs complete all as specified and directed.

S&F of 15mm bore chromium plated fancy type Bib taps, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule fixed and including taking down old unserviceable taps complete all as specified and directed.

S&F for 15mm bore stop valve fancy type, two way angle cock, cast copper alloy chromium plated screwed down, high pressure with capstan heads, screwed both ends for iron pipe or for union fixed as in repair complete all as specified and directed.

S&F for 10 Litres capacity PVC valve less syphonic action type, flushing cistern low level, white coloured, with inlet, ball valve, float and handle including brackets complete with flush pipe complete all as specified and directed.

S&F for PVC connection suitable for 15mm bore with PTMT nuts of 600mm length complete all as specified and directed.

S&F for Stop valves/angle valve, 15mm bore, fancy type, chromium plated, cast copper alloy with adjustable wall flange, screwed down, high pressure, screwed both ends for iron pipe or for unions fixed as in repair complete all as specified and directed.

Taking up or down steel tubing and connections 15mm bore complete all as specified and directed.

Taking up or down steel tubing and connections 20mm bore complete all as specified and directed.

Supplying and laying of CPVC pipes, outer diameter 16mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

Supplying and laying for CPVC pipes, outer diameter 20mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.

S&F for Chromium plated health faucet 15mm dia screwed down high pressure flexible pipe 1.0 to 1.5mtr tube and hook for pedestal pattern water closed fixed as in repair complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580x440mm white including 'P' or 'S' trap front or back inlet including footrest (excluding fluxing cistern and flush pipe) complete all as specified and directed.

S&F in repair vitreous china WC Pedestal pattern white including 'P' or 'S' trap front or back inlet including seat cover complete all as specified and directed.

S&F for 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches/floor fixed as in repair complete all as specified and directed.

S&F for 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in trenches/floor fixed as in repair complete all as specified and directed.

S&F for 110mm bore PVC (SWR) bend any radius provided with access door fixed as in repair complete all as specified and directed.

S&F for 75mm bore PVC (SWR) bend any radius provided with access door fixed as in repair complete all as specified and directed.

Taking Down 20mm bore Gun-metal globe or gate valves (ISI marked), with iron wheel head, screwed both ends for iron pipe, complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry with solid blocks type C1 1:3:6 (20mm garded agge) , exc. 10 cm in width and setting in cement mortar 1:4, complete all as specified and as directed.

S&F in repairs of Brass chromium plated shower rose 125mm size complete all as specified and directed.

S&F for 15mm bore brass chromium plated Wall Mixer for mixing hot & cold water screwed down for iron pipe, complete all as specified and as directed.

M&L for PVC (SWR) floor trap with diameter of outlet 75mm, plain with grating including jointing with solvent cement.

S&F for Vitreous china Corner Wash Hand Basin of size 400mm X 400mm X 195mm with oval bowl design, including waste pipe, brackets and waste coupling, complete all as specified and directed. Cat No S2040161 of CERA or Equivalent.

S&F for 15mm bore brass chromium plated swan neck pillar tap for wash basin screwed down for iron pipe complete all as specified and as directed.

S&F for corner glass Shelf of size 300mm with ABS brackets, all as specified and as directed. Make and Model No BEA-46 (SHELF) of Prayag or Equivalent.

S&F for Tubular towel rail, brass chromium plated, 20mm dia, ‘D’ type, 60cm long between flanges fixed as in repair complete all as specified and directed.

S&F for stainless steel Grating doom 100mm dia without hole complete all as specified and directed.

S&F for stainless steel Grating doom 100mm dia with hole for waste pipe complete all as specified and directed.

Taking down existing sunken portion treatment by demolition of old concrete and carry out the sunken treatment as in following steps given below complete all as specified and directed (a) S&F drainage spout pipe GI 40 mm dia bore light grade up to outside of outer wall (appx 450 mm to 600 mm long) (b) M&L for PCC 1:1.5:3 type B-O( using 12.5 mm graded stone aggregate ) 50 mm thick laid in slope towards drainage out spout pipe mixed with Water proofing chemical as per manufacturer instructions of MAKE : FOSROC/ SIKA/ PIDILITE/ STP,Khurra 150mmx150mm (min) at appropriate location for free flow of leaked water if any drainage spouts shall be provided integrally while laying PCC, fixing of spout shall be done with same PCC as in this item. (C)M&L 18 mm thick cement plaster in CM 1:3 on vertical faces mixed with water proofing chemical of MAKE:301 Pidicrete URP of Dr Fixit or other techno commercially Equivalent make of SIKA /PIDILITE/ FOSROC/STP. (d) M&L for lime concrete with 40mm graded aggregate as in filling in balance portion of sunken floor. NOTE :- (a) Depth of sunken floor is approx 30 to 40cm. (b) Top floor area of sunken portion shall be considered for measurement and payment.

M&L for point wiring for controlled by one switch with PVC insulated but unsheathed single core FRLSH multistranded copper conductor cable IS-694 marked of size 1.5 Sqmm (nominal area) in and including non metallic rigid PVC conduit 20 mm dia by cutting chases in walls by cutter and making good the surface in CM 1:3 and to the original specification and PVC conduit on ceiling for steel structure/surface conduit with clamps, gutties etc for RCC ceiling with including one run of PVC insulated FRLSH copper conductor cable of 1.5 Sqmm with green insulation as earth wire and connected to earth dolly complete all as specified and directed. (a) One light/exhaust fan point controlled by one, one way switch

M&L for submain wiring with 2 single core PVC insulated unsheathed multi stranded copper conductor FRLS wire 4.00 Sq mm 1100 volts grade including and 4.00 Sq mm PVC insulated, multi stranded, unsheathed copper wire green in colour as earthing lead drawn through in PVC conduit. Note :- Two run of 4.0 Sqmm cable and one run of 4.0 Sqmm cable as earth continuity conductor and 25 mm PVC conduit shall be measured & paid as one unit.

S&F for switch piano flush type single pole one way 5 Amp (ISI Marked) complete all as specified and directed.

M&L for Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20Amp complete all as specified and directed.

M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) complete all as specified and directed.

S&F for MCB, 6 to 32 Amp, SP, 240 Volt. complete all as specified and directed by Engineer-in-Charge.

S&F for Surface and wall mounted LED tube light fittings of cap 10W , two feet Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver complete all as specified and directed.

S&F for Surface and wall mounted LED tube light fittings of cap 20W , four feet Basic all purpose surface and wall mounted LED batten with polycarbonate housing & integrated electronic driver complete all as specified and directed.

S&F for exhaust fan made out of sturdy engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, copper winding of size 250mm sweep complete all as specified and directed.

BHAGWATI CONSTRUCTION (BID ID -3189831)

Bhawani Enterprises (BID ID -3196383)

S K TRADER (BID ID -3196405)