WBPWD/EE-I/CKHED/eNIT90/25-26

Supply and Installation of exhaust pipe line connection with MS black pipe 200mm (8”) dia ISI approved, necessary nuts, bolts, washer, gasket incl. electrical welding where necessary.

Supply and Installation of exhaust pipe line connection with MS black pipe 150mm (6”) dia ISI approved, necessary nuts, bolts, washer, gasket incl. electrical welding where necessary.

S&F200mm dia MS heavy type long bend

S&F 200mm dia MS plug extension.

S&F 150mm dia MS plug.

Painting the 200 dia MS black pipe by Black enamel of two coat over the RO primer. Approved make.

Making insulation by 3" thick glass wool including netting arrangement and covered with 26 SWG aluminium clading as per direction of the EIC.

a)200 mm dia exhaust pipe.

b) Residential type silenser pipe for 250 KVA.

c) 150 mm dia exhaust pipe.

Supply & fixing of Godrej make engineeered dimple key lock.

Making Neccessaery Arrengements and Supply and installations of hatch boltz set on 250 KVA DG set door and respective net guard door with neccesary flat head nut bolts.

Making Neccessaery Arrengements and Supply and installation of MS net guard of Section 75mm x 25 mm of gauge 2mm with 3 numbers horizontal supports of 40mm x 40 mm squar pipe. Also , making two numbers door with neccesary arrangements of locking with above mentioned hatch bolt and lock.area approxe 114 sqm.(1227 sqFT)

Supply and pour of H.S. Diesel oil for necessary commissioning & load test of new DG incl. transportation cost.with loading and unloading

Supply and Fixing of aluminium blue scope sheet make TATA/JSW/Bhusan).On verticle side of above mention structure of DG set for rain guard and prevention of theft with moisture and corrision proof self threading bolted screw arroximately107 sqmtr (1150 sqFT )

Extra for support of the above aluminium sheets in both horizontal and vertical with 40x40mm square ms pipe including necessery fabrications and one coat of black enamel paint.

S&F special type MS angle iron bracket support made of 40x40x6 mm. MS angle with flat iron clamp with nuts, bolts & washers etc. for 250 mm. dia (Vertical Run).

Connecting the equipments body to earth busbar incl. S & F 50 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with GI saddle as required and connection to equipments with incl. drilling holes, bolts, nuts,washers etc

Rate should be quoted incl. of all taxes and cess.

Defect Liability period : 1 year