MISC B/R MAINT WORKS AND REPAIR/MAINTENCE OF MOTORISED ROLLING SUTTER IN TECHNICAL AREA AT AIR FORCE STN ARJAN SINGH UNDER GE (AF) PANAGARH

S&F for 600 mm long PVC hot water connection pipe including nuts for Geyser hose pipe complete as in repairs all as specified and directed. (Make: Blue Star & Silver Shine/ Prayag Polymer Pvt. Ltd./ Polytuff)

S&F for PVC connection 15 mm dia with PTMT nuts of length 450mm at both ends screwed for iron pipe of 15 mm bore complete as in repair all as specified and directed. (Make: Blue Star & Silver Shine/ Prayag Polymer Pvt. Ltd./ Polytuff)

S&F for brass chromium plated tubular towel rail 20 mm dia 60 cm long with and including one pair of brass chromium plated brackets complete as in repair all as specifed and directed. (Make:-Jaquar Cat No ACN-1111SM/ Parryware Cat No T6001A1/ Cera Cat No F5007103)

S&F for brass chromium plated tubular towel ring with brackets complete as in repairsall as specified and directed. (Make:-Jaquar/ Parryware/ Cera)

S&F for CP health faucet with 1 mtr tube and hook including all fittings complete as in repairs all as specified and directed. (Make: Parryware Cat No T9961A1/ Jaquar Cat No ALD-579 / Johnson Cat No S0826C)

S&F for brass CP single lever basin mixer without popup complete as in repairs all as specified and directed. (Make:- Johnson Cat No T0145C / Jaquar Cat No KUP-35011BPM / Cera Cat No F1007451)

S&F for sensor hand dryer complete as in repairs all as specified and directed. (Make:-Jaquar Cat No HDR-SSF-AK2803D / Parryware/ Cera)

S&F for Vitreous China wash down water closet pan wall hung, white including fixing bolts, flushing cistern,flush pipe plastic water closet seat white including jet spray, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devices and also including 'P' or 'S' trap complete as in repair all as specified. Make of Pan Parryware Cat No C0210/ Jaquar Cat No CNS-WHT-353S/ Cera Cat No S1031102 Make of cistern Parryware Cat No C0768/ Jaquar Cat No CNS-WHT-203/ Cera Cat No S1060102 Make of Seat cover, jet spray and trap: Parryware /Jaquar/ Cera

S&F for 600mmx450mmx5.5mm thick frameless bathroom mirror, cerium oxide polish, mounted on 9mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washer complete as in repair all as specified and directed. (Make: Sant Gobain/ Modiguard/ Prayag)

S&F for vitreous China (counter top) wash basin, white size 600mmx 450mmx190mm including brackets (2 nos), waste coupling (CP), short piece connection as required length, CP waste pipe 32mm dia including cutting of existing granite slab for fixing of counter wash basin including rounded and grinding the stone with necessary arrangement complete as in repair all as specified and directed. (Make:Jaquar Cat No QNS-WHT-7601AT No 10051 / equivalent in Parryware/CERA

S&F of false ceiling of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with FINE EDGE TILES ARMSTRONG SILHOUTTE EXPOSED GRID SYSTEM after dismantling wall and ceiling boards (fiber,pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete.The tiles should have humidity Resistence (RH of 99%, NRC 0.55 Light Reflectance 85% thermal conductivity K=.052-0.057 w,m k. colour white, fire performance class O class 1 (BS476 Part 6&7) in module size of 600x600x12mm with Bio black coating on the face of the tile, suitable for Green building application, with the recycled content of 63%. The tile shall be laid on Armstrong Silhouette porfile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capcity of minimum 15.68Kg per squaremetre. Sihouette, main rummers & cross Tees to have mitred ends and "birdsmouth" notches to provide mitred crucitform juctions. The Tee Sections have a galvanizing of 120 grams per squaremetre & passed through 500 hrs of salt test. the quoted rate is deemed to be inclusive of cost of necessary scaffolding work required to carry out the job complete after Dismantling of wall/ceiling boards (fibre, pulp,insulation etc) or insulation boards/ slabs/blanket any thickness including cover fillets all as specified and directed.(Make:Lafarge/ Eternit Everest/ Armstrong)

S&F for vitreous China water closet (squatt pan) Orrisa pattern 580x440 mm size pan, white, with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to flushing cistern/pipe and traps etc. complete as in repair all as specified and directed. (Make Parryware Cat No C0117* / Cera Cat No COVY S3010104/ Johnshon Cat No P0461PW)

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for sutter of windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle,Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.(Make: Hindalco / Indal / Jindal section)

S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) as in frame of doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.(Make: Hindalco / Indal / Jindal section)

S&F for Powder coated anodised aluminium door shutters of any type, aluminium section 50 micron of any colour, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles two

nos in each door shutter, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed.(Make: Hindalco / Indal / Jindal section)

S&F for 5.5 mm thick sheet glass ordinary quality in squares n . exc 0.50 sqm in each pane for aluminium window/ventilator/door shutter of any type, etc. complete all as specified and directed.(Make: Saint Globin/ Modi Guard/ Triveni / Float Glass /Atul /Hindustan/Kohinoor)

S&F for 3 mm thick Sheet glass (ordinary quality) and glazing with oil putty in squares n . exc 0.50 sqm in each pane complete after hacking out old broken glass all as specified and directed. (Make: Saint Globin / Modi Guard/ Triveni / Float Glass /Atul /Hindustan /Kohinoor)

S&F for 20 mm dia ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete as in repair all as specified and directed. (Make: Zoloto / leader / Kirloskar)

M&L for 10mm thick joint free premium quality dark shed vitrified ceramic coloured tiles of size 600x600mm (premium quality) on match existing surface as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 20 mm thick backing layer of cement plaster in cement mortar (1:4) complete after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises all as specified and as directed.(Make: Johnson Marbonite / Varmora / Euro Tiles / Somani / NITCO / Kajaria )

M&L for non skid ceramic joint free coloured tiles 7 to 8 mm thick (premium quality) Square/rectangular, area of each tile of size 300mm x 300mm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 15mm thick screed bed in cement mortar (1:4) complete after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises all as specified and as directed.(Make: Johnson / Varmora / Somani / NITCO / Kajaria )

M&L for glazed ceramic joint free coloured tiles of size 450x350x7 to 8 mm thick, (premium quality) on vertical surface such as dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, laid over and including 10 mm thick backing layer of cement plaster in cement mortar (1:4) complete after dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises all as specified and as directed.(Make: Johnson / Varmora / Somani / NITCO / Kajaria )

M&L for 15mm dia two way bib tap cast copper alloy with crutch or butterfly handle, chromium plated, fancy type, screwed for iron pipe complete as in repair all as specified and directed. (Make: Jaquar / Kohler / Parryware )

S&F for factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia andlength complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). (Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified and directed.)

S&F for 30mm thick factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary SS screws shall be paid separately) complete all as specified and directed.

Repair and servicing after inspection of both motorised and manual type rolling shutter and dismantling of rolling shutter of any type (area not exc. 8 Sqm) duly cleaning of dust, rust, etc from the surface of shutter and applying lubrication as greasing the parts where required for smooth functioning of shutter including repair/replacement of any defective parts, motor repair and necessary welding works etc including two coats of synthetic enamel paints over a coat of red oxide primer after preparation of surface of rolling shutter complete all as specified and directed. (Note:- (i) All labour and material required for this work are included in this item. (ii) Painting works are included in this item. (iii) Necessary completion certificate of this item from the users is required at the time of payment claim)

S&F for 100mm long butt hinges (medium weight) cold rolled mild steel complete as in repair all as specified and directed.

S&F for 100mm long butt hinges (medium weight) stainless steel complete as in repair all as specified and directed.

S & F for 150 mm long aluminium alloy handles, cast type, anodized complete as in repair all as specified and directed.

S & F for 150 mm long aluminium anodised barrel tower bolts of extruded section complete as in repair all as specified and directed.

Re-fixing of shutters of any description area exc 1 sqm but n.exc 2 sqm each leaf and removing to store complete all as specified and directed.

S&F for 300 mm long stainless steel pull handle D-type of 25.4mm dia complete as in repair all as specified and directed.

S&F for mortice lock standard Art No-ML110SS, verticle type, size 150mm SS (Silver satin body) including lock CL-101, D-type handle of size 210x55x2 SDOPSS2 and fixed complete as in repair all as specified and directed

S&F for mortice lock standard Art No-ML110SS, verticle type, size 100mm SS (Silver satin body) including CL-101, D-type handle SDOPSS2 and fixed complete as in repair all as specified and directed

S&F for aluminium (die cast body) door closer hydraulically regulated DC80PDC, designation No. 2 universal type, suitable for door shutters of 851mm to 1000 mm in width and of weight between 61 kg to 120 kg and fixed complete as in repair all as specified and directed .

S &F for aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.