Repair/replacement to boundary wall, fencing path, hard standing and other misc items at Kanjoli lines under GE Bharatpur

Amount

Dismantling/demolition of brickwork or stone boulder masonry built in cement mortar including all quoins, arches, pillars, precast articles etc, complete all as specified and as directed.

M & L for brick work with sub-class 'B' bricks, straight or curved on plan exc 6.0 metre mean radius as wall built in cement & sand mortar 1:6, complete all as specified and as directed.

Taking down cement or cement lime plaster of any description from brick or stone walls including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

M&L for rendering 15 mm thick in cement and sand mortar 1:4 on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement, complete all as specified and as directed.

M&L for rendering 15 mm thick in cement and sand mortar 1:4 on surface other than fair face of brick work or cement concrete surfaces including finishing the surface even and smooth, complete all as specified and as directed.

M&L for preparation of new surface and applying two coats of cement base paint of approved shade on walls over one coat of water based white pigmented alkali resistant priming paint complete all as specified and as directed.

M&L for preparation of old surface and applying one coats of cement base paint of approved shade on walls complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) embedded in concrete, brick work, masonry, etc. any section, including taking out embedded portion and making good disturbed ground complete all as specified and as directed.

Dismantling fencing wire mesh, any type complete all as specified and as directed.

Dismantling concertina coil, barbed wire any size & type complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Excavation in post holes each n. exc .50 cum, getting out in soft/loose soil and removing surplus material n. exc 50 m and making good disturb surfaces complete all as specified and as directed.

M&L for PCC 1:4:8 type D2 using 40 mm graded crushed stone aggregate as in foundation of posts and struts, foundation, filling and mass concrete etc. complete all as specified and as directed.

M&L for cement concrete (1:2:4) type B1 using 20 mm graded aggregate, in lintels upto 1.5 mm clear span, oils, steps; seismic and other similar bands, plinth courses, string courses, lacing courses parapets and railings upto 60 cm in heights coping kneelers, apex stone bed plate, water trough and the like including weathering, slightly champhered angles and throating including necessary formwork etc. complete all as specified and directed.

S&F for Mild steel work of Fe-290 Gde E-165 as in angle iron fencing posts and struts & flat iron, drilled and countersunk for boulders running bars, including embedding in concrete and securing etc post and struts in fencing including cutting, tops to shape as directed, bent to shape, drilling holes, notching for wire etc. flat iron fillets (for securing wire mash etc.) including all necessary drilling, bolting or riveling etc. complete all as specified and as directed.

S&F for Mild steel Round bars conforming to Fe 290 (Gde-E-165) 10 mm dia and over as in horizontal vertical fillets in fencing including hooking complete all as specified and as directed.

S&F for Mild steel screw bolts (machine made) of 10 mm dia and 50 mm long with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and as directed.

Supply only Chain link MS galvanised fencing, mesh size of 75 mm & nominal dia of mesh wire not less than 3 mm, complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provission of binding wire complete all as specified and as directed.

M&L for Plain mild steel wire, galvanised class 3, in fencing including straining and fixing to wood, concrete or steel posts and/or to straining bolts, including securing with and provision of galvanised iron tying wire, galvanised iron staples or steel pins, etc. complete all as specified and as directed.

S&F for Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc, complete all as specified and as directed. (each line wire to be measured).

Re-fixing of galvanised concertina coil with punched tape, with necessary bolts and GI staples, complete all as specified and directed.

M&L for preparation of new steel and iron surface of any description and applying 2 coats of syntheltic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for painting over surfaces of any description, n. exceeding 10 cm in width or girth when unconnected with other painting or when painted in a different tint complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n.exc 15 cm thickness (below or above GL) complete all as specified and as directed.

M&L for broken stone or boulders in hardcore of gauge exc 63 mm but n exc 100 mm deposited spread and levelled in layers n. exc 15 cm thick watered and rolled/rammed to a true surface complete all as specified and as directed.

M&L for 100 mm thick Cement concrete type D-2, using 1 : 4 : 8 (40mm graded stone aggregate) as in sub floors/sub bases etc. complete all as specified and as directed.

M&L for 25 mm thick, sand for filling under floors, spreading and levelling in layers 25 mm thick including watering and consolidation complete all as specified and as directed.

M&L for 60 mm thick, machine pressed precast concrete interlocking paver block with grey cement and no pigment of any shape and size as approved by GE, confirming to IS 15658-2006, M-35 Grade, complete all as specified and directed.

M&L for machine factory made PCC block (1:2:4) type B1 using 20 mm graded stone aggregate, as in kerb stone of size 300 x 300 x 150 mm set in cement mortar (1:4), complete all as specified and directed.

M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & pigment over 15 mm thick screed in CM (1:6), complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc., complete all as specified and as directed.

M&L for brushing neat cement slurry with 3.0 kg of cement per sqm, complete all as specified and as directed.

M&L for Granolithic concrete 1:1:2 topping 50 mm thick, laid over surface of any position wall, floor, roof or ceiling and finished to an even and fair surface, complete all as specified and as directed.

Dismantling asbestos cement (corrugated or semi corrugated) sheets in roof coverings complete all as specified and directed..

Dismantling timber scantlings 40 Sqcm and over in section from unframed work complete all as specified and as directed.

Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in section from unframed work complete all as specified and as directed.

S&F rolled mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections,ms pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A' complete all as specified and directed.

M&L for mild steel work as in wind ties for roof covering including securing bolts etc. including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165 complete all as specified and directed.

S&F plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410W Gde E-250 quality 'A' complete all as specified and directed.

Pre-painted galvalume alumimnium zinc coating GI based corrugated steel sheet 0.50 mm thick, sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified and directed.

Pre-painted galvalume alumimnium zinc coating GI based plain steel sheet 0.50 mm thick sheeting of any colour having strength of 550 mpa as in roof covering etc, complete all as specified and directed.

M&L,Plain cement concrete type C-1 (1:3:6) (20mm graded stone aggregate) as in surface channels & drains complete all as specified and directed.

M&L,Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified & directed. Note : Inner girth only measured.

S&F PVC (SWR) 110 mm dia pipe in any length for weep holes, complete all as specified and directed.

M&L Precast cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate Set in CM(1:4) louvres and jallies, 50 mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed.

M&L Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM(1:4) with joints to match complete all as specified and directed.

Tulsi Enterprises

VASUNDHARA AND COMPANY

GANGA CONSTRUCTION

M/s Gupta Traders

B K Construction Company

M/s Ranaji Construction Co

SINGH ENTERPRISES

AMIT RISHABH BUILDERS PRIVATE LIMITED

C P Singh and Co