CERTAIN B/R REPAIR AND DAY TO DAY MAINT, ROOF TREATMENT, JOINERY, GRIT PLASTERING, PERIODICAL SERVICES AT CERTAIN BLDG IN ZONE A AND ZONE B AND ZONE C AT BHDC GE (EAST) DELHI CANTT-10

Demolition of brick work built in cement mortar complete all as specified and directed

M & L for brick work with sub-class B brick straight or curved on plan built in cement mortar 1 : 6 complete all as specified and directed

Taking down cement plaster on brick or stone walls etc. including raking out of joints, hacking for key, scrubbing down with water etc. of any description complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:6 on brick or concrete surfaces of walls, finished the surface fair and even without using extra cement complete all as specified and as directed.

M & L 15 mm thick rendering in cement mortar (1:4), on brick or concrete wall surface, mixed with water proofing compound @ 3% by weight of cement, finished fair & even without using extra cement complete all as specified and as directed.

M & L 5 mm thick rendering in cement mortar (1:3) on ceiling surface, finished even & smooth without using extra cement complete all as specified and as directed.

M&L preparation of new plastered wall surfaces and applying two coats of Oil Bound Distemper over and including over and including 2 mm thick cement based wall care putty complete all as specified and as directed.

M&L preparation of new plastered wall surfaces and applying two coats of weather proof Exterior emulsion paint of colour & shade as approved (Colour scheme shall be as approved by the GE & user) over and including a coat of priming paint, over and including 2 mm thick cement based wall care putty complete all as specified and as directed.

M&L preparation of new plastered ceiling and applying three coat of white wash complete all as specified and as directed.

M & L for washed stone grit plaster on exterior walls in two layers, under layers 12 mm thick cement plaster 1:4 (1 cement :4 coarse sand) following the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer with 15 mm thick cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand:2 coloured marble stone chipping 10mm nominal size) including using Colour pigment & marble powder as required in ground in panels with groove all around as per approved pattern including scrubbing and washing the top layer with wire brushes and water to expose the stone chippings includind forming groove of uniform size 15mm wide and 15mm deep as per approved pattern complete all as specified and as directed.

M & L for preparation of old decorated, wall surface by scrapping by electrically operated grinder machine/electric regmal machine and applying one coat of wall care putty on patches surfaces then scrubbing by sand paper to prepare a even surface and applying priming paint followed by applying one coats of OBD of any colour washing down with water complete all as directed.

M&L for preparation of old decorated, wall, roof (corrugal) surface, by brooming and removing all loose layers of old treatment, efflorescence soot and moss by wire brush and filling all nail holes and patches with cement based wall care putty and applying one coat of weather proof Exterior emulsion paint of colour & shade as approved (to match with the Existing surface) complete all as specified and as directed. Note for item No 11 & 12: Quoted rates shall deemed to be includs painting at any height including scaffolding work, as required.

M&L for preparation of pathway/Flooring (Over Interlocking/Chequired tile surface) or any type of surfaces old/New or any position and applying one coat of floor paint of superior quality complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paints over and including one coat of red oxide primer complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4, Type B1, using 20 mm graded stone aggregate, below tiles for levelling of existing surface complete all as specified and as directed.

S&F Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc, over and incl 15 mm thick Screed bed in Cement Morter 1:6 for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the shade of tile complete.

S&F Glazed coloured Vitrified tiles(light shade) 10 mm thick (square/ rectangular) polished, area of each tiles Not exceeding 0.36 sqm, in floors etc. over and incl 15 mm thick Screed bed in Cement Morter 1:6 for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the shade of tile complete all as specified and as directed.

S&F Glazed coloured Vitrified tiles (light shade) 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. over and incl 15 mm thick Screed bed in Cement Morter 1:6 for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement mixed with pigment to match the shade of tile complete.

M&L glazed coloured ceramic tiles, 600x300x7mm thick, in vertical surfaces such as skirting/dado etc, set and jointed in cement slurry, laid over & including 10mm thick rendering in cement mortar 1:4, set, jointed and pointed in white cement mixed with colour pigment to match the shade of tile complete all as specified and as directed.

M& L for 16 mm thick Sand stone cladding/Facing tiles gang saw cut with machine cut edges, uniform Size, colour of each stone polishing, rubbing & including silicon treatment between two stone for wall any height including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Taking down of chowkhat or frame (without taking off shutter from frame) area not exc 1.50 Sqm each including builder hardware fitting complete all as specified and as directed.

Description all as per item No 22.00 here in Before but area exc 1.50 Sqm & not exc 4.00 Sqm each complete all as specified and as directed.

Taking down shutters of any description area exc 1.00 Sqm but not exc 2.00 Sqm each leaf including builder hardware fitting complete all as specified and as directed.

S&F aluminium powder coated door frame with partially glazed shutters single/ double leaf divided into two glazed panels including aluminium anodised snap beading, all necessary accessories like hinges, Tower Bolt & Sliding bolt etc and rubber gasket/lining for fixing of glass as directed. The frame shall be fixed with aluminium anodised bolt by drilling in the existing wall and with thrust bolt of suitable size all as directed. The frame and shutter will be made out of the following section and fitting a) Aluminium anodised door frame 101.60 mm x 44.75 mm x 2mm fixed with aluminium thrust bolt in walls by drilling as directed. b) Aluminium anodised sides rail of shutter section 83.5mmx 44.5mm x 2mm c) Aluminium anodised bottom rail of shutter section 150mm x 44.5 mm x2mm. d) Aluminium anodised top and middle rail of shutter section 100mm x 44.5 mm x 2mm. e) Aluminium anodised tower bolt 200 mm long - 02 Nos in each leaf Aluminium anodised handle 250 mm long of approved Make Classic/Argent 02. No’s in each leaf. h) Glass Pane shall be 5.5 mm thick tinted glass. j) 5 mm thick Aluminium Composite panel and lock including complete all as specified and directed

Supply, fabricating and fixing windows with frame of aluminium powder coated of extruded aluminium section two track with two sliding shutters (all necessary accessories like hinges, Tower Bolt & Sliding bolt etc) with following sections (a) Frame section shall be 63.50 mmx38.10 mmx2 mm thick. (b) Two track bottom rail for sliding of shutters 61.85mm x 31.75mmx2mm thick. (c) Two track top section shall be 61.85mmx31.75mmx2mm thick(d) for sliding shutter handle& 'H' bottom section should be 40mmx(18mm+9)mmx1.45mm thick(e) sliding shutter to be provided with 5.5mm thick sheet glass( Modi/Saint gobain/tinted, plain, frosted (f) stainless steel wire clothes 0.36mm nominal dia of wire and average width of aperature 1.40mm complete all as specified and as directed

S & F in Repair powder coated aluminium anodised section 40 x 44mm x14 gauge for aluminium partition wall in wall in panel 1m x1m covered with 5mm thick plain/frosted tinted glass on top half portion and 5 mm thick ACP sheet fixed in half bottom portion including V beading at Aluminium Grill edges complete all as specfied and directed.

S&F in repair aluminium Powder Coated grill with and including suitable aluminium anodised frame including V - beading at all edges as requird manufactured by M/S Decogrill as per design No DG- 104 or equivatent 7.5 mm thick all as specified and as directed by Engr- in- charge.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S & F factory made UPVC white colour Sliding window Three track area not exceeding 2.00 Sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40 mm and required accessories. (Note: The unit rate quoted by contractor includes cost of glass and all other connected accessories. Net Opening will be measured for payment purpose.)

S&F Door closer, Powder Coated aluminium body hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed complete.

S&F in repair double-action floor spring, heavy-duty type, suitable for aluminium framed doors, with adjustable closing speed, including top centre, bottom pivot, stainless steel cover plate, anchor bolts and all necessary accessories; cutting the floor as required and making good the disturbed surfaces to match the existing finish, complete all as specified and directed by the Engineer-in-Charge.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets and frame work etc complete all as specified and as directed.

S&F Solid PVC Wall Panelling consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame acomplete all as specified and directed.

M&L false ceiling using powder coated grid system of GI modular grid size 600 x 600 mm with runner 38x24x07 mm cross tee 25x24x0.7 mm and wall angle 24x24x7-8 mm thick PVC laminated Gypsum tiles of size 600 x 600 mm of different designs with rear side MPL film fitted in the grid, grid system hanges by 6 mm dia GI wire to purlin, trusses; RCC slab of the roof etc. with hold down clips, butterfly clips, height fixtures etc, complete all as specified and directed.

S&F GRG (Glass fibre reinforced Gypsum) semi perforated 12 mm thick tiles of size 595 x 595 mm white colour of approved texture,design (Tegular) and patterns having moisture content less than 2%, humidity ressitance of 99% NRC 0.60 to 0.85 as per IS 8225:1987, Non combustible as per BS 476 Sub Head : 26.0 New Technologies and materials reflectance of 85%(Min) to be laid in true horizontal level suspended on interlocking metal 'T' grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120grams per sqm including both sides) comprising of main 'T' runners of size 15 x 32 mm of length 3000mm,cross Tof size 15 x 32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items(galvanised @ 80 grams per sqm ) i e 50mm long, 8mm outer diameter M-6 dash fasteners,6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x2 mm. Galvanised iron perimeter wall angle of size 24 x 24 x0.40mm thick of length 3000mm to be fixed on periphery wall /partition with the help of plastic rawl plugs at 450mm center to center and 40mm long dry wall wood screws complete all as specified and as directed. (Make- Dimond, Armstrong,Gyproc or Shera) Note: Contractor has to submit the drawing to the Engr-in-Charge and get the same approved before execution of GRG work.

S&F 10 mm thick toughened frosted glass door shutters of size area exc 1.50 Sqm but not exc 3 Sqm, including necessary floor spring hydraulically regulated, other side fixed on pivot CP fittings and fixtures, CP handles 300 mm long, CP locking arrangement, necessary cutting & holes moulding and fixed including engraving, emblem and lattering not exc 200 mm complete as per directed by Engr-in-Charge.

M & L in repair 18 to 20 mm thick Granite slab (Z Black) work (table rubbed and polished), in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & half curving the edges of granite stone slab, over and including 20mm thick screed in cement mortar 1:6 including demolition of old stone slab complete all as specified and as directed.

S & F in repair of Modular wardrobe,cupboards, cabinets, drawers , shelfs, vanity , dressing table including shutters ( depth of 45 Cm up to 70 Cm) etc , all front side, bottom, top, two sides and partions etc made out of 15-18 mm thick HDHMR board and back side made out of 8 - 10 mm thick HDHMR board (Action tesa or equivalent ) with machine pressed 0.5 to 0.8 mm thick fabric/glossy colour laminate on all exposed front side and other sides decorative laminations . All exposed edges of boards with machine pressed edge band 0.8mm from rehau Germanetc (colour of laminates , design & paterns of partations/ etc as approved by GE) including all accessories of fittings - Auto/soft closing hinges for shutters , C/J gola profile for handel less, telescopic channels 18'' / 20'' long , rollers for smooths sliding of drawers, etc as required complete all as specified and as directed. (Note : Overall net size front side including frame will be measured for payment purpose)

S & F in repairs Vitreous china floor mounted WC ( Cascade) one piece type (off white) including connecetion in drain etc incl water closet seat cover , flushing cistern, with P or S trap with all fitting and fixture complete all as specified and as directed. (Make : Jaquar or equivalent).

S & F in repair Vitreous China wash down water closet pan (pedestal pattern) of size 580 mm white with ‘P’ or ‘S” trap, any pattern including Seat Cover (excluding flushing cistern and flush pipe) complete all as specified and as directed.

S & F in repair Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white premier quality, with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, etc complete all as specified and as directed.

S & F in repair 10 Ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and as directed.

S&F in repair Vitreous China Urinal,Half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with CP Spinkle and including 60mm long brass screws, complete all as specified and as directed.

S&F in repair 10mm thick toughned glass partition of size not less than 310 x 700mm including fitting/accessories of the same complete all as specified and as directed.

S&F in repair 15 mm bore angle stop valves cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed withr iron pipe of union.

S&F in repair PVC connection 15mm bore with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repair white Wash Basin with Pedestal fo size 560 x 415 x 820 mm complete all as specified and directed.

Supply and fixing of wash hand basin (counter-top / under-counter / wall-mounted as specified) of approved make and design, made of white vitreous china, conforming to IS:2556, complete with vanity cabinet made of Medium Density Fibreboard(MDF), finished with high-pressure laminate/ acrylic surface as approved. The basin shall be provided with CP brass pillar tap/mixer tap, CP brass bottle trap, waste coupling, and flexible inlet and outlet connections including angle valves. Vanity to include soft-close drawers or shutters, mirror, and internal shelving as per design. All plumbing connections (inlet and outlet), fixtures, brackets, silicone sealing, cutting, jointing, fixing, and making good of walls and surfaces to be included. The item is inclusive of all materials, fittings, accessories, tools, etc., to complete the work in all respects as per directions of the Engineer-in-Charge.

S&F in repair Waste coupling 32mm bore dia of PTMT half threaded for WHB complete all as specified and directed.

S&F in repair 15 mm CP Brass Urinal spreader with Hex heavy quality for urinal complete all as specified and directed.

S&F in repair PVC Urinal Waste Pipe 32 mm dia for urinal complete all as specified and as directed.

S&F in repair PVC Solid Waste Pipe 32 mm dia for WHB complete all as specified and as directed.

S&F in repair CP Bib Cock 15mm long body with flange complete all as specified and as directed.

S&F in repair CP Soap Dish including chromium plated brass screws and plastic cleats complete all as specified and as directed.

S&F in repair 600 mm long CP Tubular Towel Rail 20mm dia complete all as specified and as directed.

S & F in repair 15mm bore WHB Mixture with swan neck complete all as specified & as directed.

S&F in repair PVC Cistern kit for one piece complete all as specified and directed.

S&F in repair urinal spreader of brass CP for fixing with 15 mm dia pipe complete all specified and directed.

S&F in repair Chromium plated 2 in 1 Health Faucet with 8mm Dia, 1.2 Meter Long Flexible Tube & Wall Hook complete all as specified and directed.

S & F new vertical venition blinds of special collection self adjusting system of louvers size 100 mm wide (as approved by GE) with aluminum top rail and PVC bottom, weight attached with 100 mm strip complete with chain all as specified and directed by Engr-in-Charge.

Comprahensive/Petty Repair of Surgical Scrub Sink One Bay for different ward/ Dept as per No water supply, Hot and Cold mixture Not working, Sensor Not working etc complete all as specified and directed to entire satisfaction of Engr-in-Charge with following requirement / condition. (Note: spares required to make sink functional shall be measured and paid separately as supply only under relevant items of this schedule/ BoQ)

Comprahensive/Petty Repair for attending complaints of Surgical Scrub Sink Two Bay for different ward/ Dept as per No water supply, Hot and Cold mixture Not working, Sensor Not working etc complete all as specified and directed to entire satisfaction of Engr-in-Charge with following requirement / condition. (Note: spares required to make sink functional shall be measured and paid separately as supply only under relevant items of this schedule/ BoQ)

Comprahensive/Petty Repair for attending complaints of Surgical Scrub Sink Three Bay for different ward/ Dept as per No water supply, Hot and Cold mixture Not working, Sensor Not working etc complete all as specified and directed to entire satisfaction of Engr-in-Charge with following requirement / condition. (Note: spares required to make sink functional shall be measured and paid separately as supply only under relevant items of this schedule/ BoQ)

Supply only sensor unit, suitable for surgical scrub sink, complete with IR sensor, control module and wiring harness, complete all as specified and directed.

Supply only solenoid valve, suitable for sensor-operated scrub sink, brass body, complete with connectors, complete all as specified and directed.

Supply only hot and cold mixing cartridge, compatible with scrub sink mixer assembly, complete all as specified and directed.

Supply only tap assembly (sensor/mixer type as applicable), complete with fixing accessories, complete all as specified and directed.

Supply only flexible PVC/SS braided connection hose, suitable for scrub sink inlet line, complete all as specified and directed.

Supply only angle valve, brass chromium-plated, for scrub sink inlet line, complete all as specified and directed.

Supply only aerator, suitable for scrub sink outlet, complete all as specified and directed.

Supply only rubber seals/O-rings/washers set for scrub sink mixer and sensor assembly, complete all as specified and directed.

Supply only waste coupling or bottle trap (PVC/CP as required), complete all as specified and directed.

Supply only PVC drain pipe, suitable for scrub sink installation, complete all as specified and directed.

M&L for Cleaning the entire area first by broom, chipping unwanted area using chisel and hammer, cleaning/ smoothening by wire brush, washing the entire surface using waterjet and finally by broom and airjet and 10-15 mm thick Ready mix palster in Ratio 1:4 then Applying one layer of cement and CCP mix in the ratio Cement:CCP:Water::1:1:0.2 and mixing it thoroughly using electric mixer coating to be done atleast 1’ longitudinally to secure edges and Filling all visible cracks using crack pack master/ Cladofix. Laying 66 gsm non woven fiber along with 2nd and 3rd coat of CCP mix and cement mixture as in step 2 . Filling overlapping joints using Master adhesive. Apply 1st coat of Polymembrane coat using brush across the area. After curing of above layer apply second coat of Polymembrane coat. Apply 1st coat of Nano top coat. Ponding test to be done by filling atleast ½” water in the entire area. Removing the water after the test is successfully completed. Apply 2nd layer of Nano top coat to finish the work all as spd and directed by Engr -in-charge. Make : STP/ Asian/ Dr. Fixit/ Nushar.

S&F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., incl Filling hollow of frame with plain cement concrete 1:3:6 type C-1 complete, as specified and directed.

S & F for MS Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed..

S & F Pressed steel frames of size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc incl Filling hollow of frame with plain cement concrete 1:3:6 type C-1 complete, as specified and directed.

S & F IInd Class HW 35 mm thick Plain framed, panelled shutter (any No panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated Complete all as specified and directed.

S&F IInd Class HW 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats Complete all as specified and directed.

S & F 35 mm thick flush shutter solid core constn with block board core and plywood face panels, commercial type on both sides, supplied and fitted to chowkhats complete all as specified and directed

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm Extruded aluminium alloy handles, fabricated type., anodised complete all as specified and directed.

S&F Butt hinges in 100 mm Size, heavy weight, cold rolled mild steel, and fixed complete all as specified and directed.

Supply and fixed Floor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring, complete all as specified and directed.

S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.

Dismantling water tanks exc 500 ltr and not exc 1000 ltr and removal from site to store complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 500 Ltrs Including making connection for inlet & outlet with connection piece complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 750 Ltrs Including making connection for inlet & outlet with connection piece complete all as specified and directed.

S & F Rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Including making connection for inlet & outlet with connection piece complete all as specified and directed.

S & F ball brass valves high pressure with polythene float & flynut complete screwed for Iron pipe or brass ferrule of 20 mm dia and fixed complete all as specified and directed.

S&F in repair 20 mm bore gun matel globe or gate valves with iron wheel, screwed both ends for iron pipes fixed complete in all respect as specified and directed.

S & F in repair ball brass valves high pressure with polythene float & flynut complete screved for Iron pipe or brass ferrule of 20 mm dia and fixed complete all as specified and directed.

M&L for welding in repair of metal thickness not exc 6 mm and length of weld exc 2.5 cm, not exc 5 cm complete all as specified and directed.

S&F in repairs Square shape Hindware fonte ceramic table top wash hand basin Star white Italian collection of size 61 x 46 x 15 Cm on 18 mm thick granite (colour as approved) machine cut as in platforms, bedded and jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone incl grinding and polishing laid over 15 mm thick screed bed or bedding layer of cement mortar 1:6 including required angles, 32mm bore dia CP waste coupling, and all reuired fittings complete in all respect as specified and directed.

S&F in repairs 15 mm dia brass chromium plated long body Bib tap fancy type with capstan head screwed down for iron pipe complete in all respect as specified.

Supply and fixed in repair Hindware Amazon 15mm bore dia chromium plated Brass single lever basin Mixer, round spout with popup Waste assemly with 10mm dia , 450 mm long copper pipes complete in all respect as specified and directed by Engr-in-Charge.

Supply and fixed CP finish Robe Hook complete in all respect as specified and directed by Engr-in-Charge.

S&F in repairs chromium plated health faucet (Brass) with double Lock including wall Hooks & flexible pipe 15mm bore hose connecting pipe 1.2 m long with check nut and washers complete all as specified .

Supply and fixed in repairs chromium plated finish paper holder complete in all respect complete as specified and directed by Engr-in-Charge.

S & F PVC mirror cabinet of size 350 mm x 450 mm x150 mm with openable single looking mirror with PVC inner & outer shelves of any colour, including taking down old looking mirror & wooden cupboard mirror complete all as specified and directed.

Supply and fixed peg set of 6 fixed with rawal plug.

S & F in repair plastic water closet seat cover white, closed pattern with flat bottom and mild steel chromium plated hinging device complete all as directed and as specified.

S&F in repair white, vitreous china, battery based, infrared sensor operated urinal of approx size 710x 485x310mm having pre & post flushing with water, including fixing to walls complete all as specified & as directed.

Supply, install, test and commission infra-red sensor operated wash hand basin tap, battery operated type, including battery, solenoid valve, control unit, fixing accessories and testing, complete all as specified and as directed.

S&F brass chromium plated Urinal spreader heavy duty of PTMT any colour for fixing with 15mm dia pipe.(Minimum weight 60gms) suitable for half stall urinal fixed with stainless steel screw complete all as specified and directed.

S & F in repair 15mm bore dia Stainless Steel finish 2 way Bib Cock quarter turn including cover plate complete in all respect as specified and directed by Engr-in-Charge.

S&F in repairs 15 mm dia cast copper alloy stop valve screwed down for high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete in all respect as specified.

S & F in repair 15mm bore Pillar cock Swan neck spoout and aertor for WHB complete all as specified & directed.

S & F in repair of SS chromium plated jet for WC with 1.00 M long pipe including necessary fittings complete all as specified and directed.

S&F in repair 20mm bore dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0mm-210gms./ 25mm-455gms/ 40mm - 690 gms)

S&F in repair Waste coupling 32mm bore dia of PTMT half threaded for WHB/Sink complete all as specified and directed.

S & F in repair of Brass chromium plated towel ring, fixed with rawl plugs. all as specified.

Disconnecting existing tanks of capacity exceeding 250 ltrs and not exceeding 500 ltrs, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required, including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc, including reconnecting and refixing in position and writing / marking the date of cleaning clearly on the tank with oil paint, complete in all respects as specified and as directed.

Disconnecting existing tanks of capacity exc 500 Ltr & n exc 1000 Ltr, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required, including cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc, including reconnecting and refixing in position and writing / marking the date of cleaning clearly on the tank with oil paint, complete in all respects as specified and as directed.

S&F in repair Full Glass Shelf 450 mm (with brass brackets) complete all as specified and directed.

S&F in repair corner Glass Shelf 300mm (with brass brackets) complete all as specified and directed.

S & F 20 mm dia Brass Elbow

S & F 20 mm dia Brass Elbow (3/4 x 1/2)

S & F Union 20 mm

S & F 20 mm dia Brass Tee

S & F Male Brass Threaded Adaptor (MTA/ MBTA) ) 20 mm dia

S & F Female Brass Threaded Adaptor (FTA/ FBTA) 20 mm dia

S&F CPVC BALL VALVE of outer dia 20 mm

S&F CPVC Tank Adaptor of outer dia 20 mm

S & F in repair 15mm bore brass CP wall mixer (2 -in - 1 type) with L bend (provision for over head shower) fancy type for mixing hot and cold water screwed down for 15mm bore iron pipes complete all as specified and directed by EIC.

S&F in repairs brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 304 grade 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including PVC waste pipe and cp waste fitting.overall size 915mmx460mm bowl size 410mmx330mmx160mm to be fix in the concrete slab and make good the damage portion complete all as specified and directed.

S&F in repairs Stain less steel plate rack made of stainless steel 1mm thick of grade 304, size 900mmx 600mmx250mm complete all as specified and directed.